Package: installation-reports Boot method: Micro SD cardImage version: firware + partition https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/firmware.Cubieboard.img.gz https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gzDate: 2021-11-28 Machine: Cubietech Cubieboard1Processor: Allwinner A10Memory: 1GiB Partitions: Filesystem Type 1K-blocks Used Available Use% Mounted on tmpfs tmpfs 101392 48 101344 0% /run devtmpfs devtmpfs 445732 0 445732 0% /dev Output of lspci -knn (or lspci -nn): (null) Base System Installation Checklist:[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O]Detect network card: [E]Configure network: [ ]Detect media: [ ]Load installer modules: [ ]Detect hard drives: [ ]Partition hard drives: [ ]Install base system: [ ]Clock/timezone setup: [ ]User/password setup: [ ]Install tasks: [ ]Install boot loader: [ ]Overall install: [ ] Comments/Problems: Screen log shows: no ethernet found. Can not config the network(both DHCP and manual) to install debian. The network on USB-ethernet adapter is working. And I'm sure the onboard eth hardware is OK, because it works on the old system image download from cubietech (wheezy and jessie). Also failed to install armbian, screen log shows: sun4i-emac 1c0b000.ethernet eth0: could not find the PHY sun4i-emac 1c0b000.ethernet eth0: cannot probe MDIO bus
Package: installation-reports
Boot method: Micro SD card Image version: firware + partition https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/firmware.Cubieboard.img.gz https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gz Date: 2021-11-28 Machine: Cubietech Cubieboard1 Processor: Allwinner A10 Memory: 1GiB Partitions: Filesystem Type 1K-blocks Used Available Use% Mounted on tmpfs tmpfs 101392 48 101344 0% /run devtmpfs devtmpfs 445732 0 445732 0% /dev Output of lspci -knn (or lspci -nn): (null) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [E] Configure network: [ ] Detect media: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: Screen log shows: no ethernet found. Can not config the network(both DHCP and manual) to install debian. The network on USB-ethernet adapter is working. And I'm sure the onboard eth hardware is OK, because it works on the old system image download from cubietech (wheezy and jessie). Also failed to install armbian, screen log shows: sun4i-emac 1c0b000.ethernet eth0: could not find the PHY sun4i-emac 1c0b000.ethernet eth0: cannot probe MDIO bus