Package: installation-reports INSTALL REPORT
Debian-installer-version: 20050311 (sid) uname -a: Linux dhcp0 2.4.27-2-sparc64-smp #1 SMP Mon Feb 14 16:15:41 PST 2005 sparc64 GNU/Linux Date: 20050312 Method: How did you install? What did you boot off? If network install, from where? Proxied? businesscard-iso (sid) Machine: Sun Ultra60 Processor: 2x Ultrasparc II (Blackbird) Memory: 2GB Root Device: SCSI Root Size/partition table: Feel free to paste the full partition Disk /dev/sda (Sun disk label): 64 heads, 32 sectors, 17522 cylinders Units = cylinders of 2048 * 512 bytes Device Flag Start End Blocks Id System /dev/sda1 0 95 97280 1 Boot /boot /dev/sda2 95 362 273408 83 Linux native / /dev/sda3 0 17522 17942528 5 Whole disk /dev/sda4 362 5130 4882432 83 Linux native /usr /dev/sda5 5130 7991 2929664 83 Linux native /var /dev/sda6 7991 9209 1247232 82 Linux swap /dev/sda7 9209 9590 390144 83 Linux native /tmp /dev/sda8 9590 17522 8122368 83 Linux native /home Output of lspci and lspci -n: pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module 0000:00:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 0000:00:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 0000:00:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 0000:00:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 0000:01:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Class 0600: 108e:8000 0000:00:01.0 Class 0680: 108e:1000 (rev 01) 0000:00:01.1 Class 0200: 108e:1001 (rev 01) 0000:00:03.0 Class 0100: 1000:000f (rev 14) 0000:00:03.1 Class 0100: 1000:000f (rev 14) 0000:01:00.0 Class 0600: 108e:8000 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O*] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O*] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Initiall Boot: Worked great, framebuffer was not started, good since my Elite3D is not supported :-) Partition: automatic, worked ok, next time I'll do it manual again, because I do not like the layout :-) do not need /tmp, I prefer tmpfs Conclusion: You did a very very good job, I never had such a smooth installation!!!!!!!!!!! -- Jörg Friedrich There are only 10 types of people: Those who understand binary and those who don't.