Package: installation-reports
Debian-installer-version: 2005-4-18 daily (first for a long time) uname -a: New machine with nothing installed. Date: 2005-4-19 8:00 utc Method: iso copied from above network install
Machine: Gigabyte GA-7N400 Pro with NVIDIA nForce 2 chipset + 2x120GB HD Processor: AMD Atholon XP 3200 2191MB 4364 BMips stopping 00 Memory: 512MB DDR Root Device: IDE1 and 2 + CD Root Size/partition table: First run: IDE1 / 1G pri bootable /home 35G logical /var 55G " /usr 10G swap 8.9G /tmp 8.9G write to disk Set IDE2 to raid1 - error not 2 raid partitions Set IDE1 to raid - error no root partition Restart partitioner -> 55% freeze Second run: See errors below
Output of lspci and lspci -n:
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [0] Configure network HW: [0] Config network: [0] Detect CD: [0] Load installer modules: [0] Detect hard drives: [ ] Partition hard drives: [E] Create file systems: [E] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ]
Comments/Problems:
Start
1 set expert26 ran OK up to raid partitioning (see above)
2 reset ps ran to detecting h/w last line of error "kernal BUG mm/page_alloc.c:520!"
3 nb video font was yellow on blue rather than thin grey on whatever.
4 Power off / on (inc removing cord)- expert26 mode - error "Segumentation fault" rest of screen white.
5 power off / on (inc removing cord)for at least 1 minute - expert26 mode - last error lines
"Setting up file system please wait
Segumentation fault
Kernal panic, Attempt to kill init!"
6 CTL/ALT/DEL ran to error "Setting up filesystem, please wait ..."
Much walking in circles and unpublishable mutterings!
Will try much later with noapic nolapic
NB H/W raid switched off in BIOS.
Useage is for fault tollerant server.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]