2006/12/21, Sergio Gelato <[EMAIL PROTECTED]>:
>3) Once the above is taken care of, I find that
>/lib/nut/bcmxcp_usb -DD -u root
>gives me the following error:
>
>Communications with UPS lost: Receive error (Request command): COMMAND: 31
>
>RECONNECT USB DEVICE
>
>Poking around with strac
>3) Once the above is taken care of, I find that
>/lib/nut/bcmxcp_usb -DD -u root
>gives me the following error:
>
>Communications with UPS lost: Receive error (Request command): COMMAND: 31
>
>RECONNECT USB DEVICE
>
>Poking around with strace, it appears that libusb (I tried the version
>i
Hi again Sergio,
2006/12/20, Sergio Gelato <[EMAIL PROTECTED]>:
Sorry, I should have read the original bug report more carefully. You
were probably right, and I should have opened two new bugs instead of
piggying back on this one. My apologies. I'd still like that patch
applied, if possible, sin
reopen 380304
thank
2006/12/20, Sergio Gelato <[EMAIL PROTECTED]>:
As Charles Lepple's follow-up question hints at, there are several problems
with the USB interface to the Powerware 5115.
1) On some hosts, the UPS doesn't even show up in lsusb output. As far
as I can tell, this happens mainly
Is this issue really fixed by using the native udev rules? I don't think so.
The rules' only purpose is to change the ownership and permissions on the
/{dev,proc}/bus/usb device files, and the bug (at least my interpretation
of it; the original submitter's statement was vague) is reproducible wh
Sorry, I should have read the original bug report more carefully. You
were probably right, and I should have opened two new bugs instead of
piggying back on this one. My apologies. I'd still like that patch
applied, if possible, since it does fix a known bug in nut-usb.
* Sergio Gelato [2006-12-20
As Charles Lepple's follow-up question hints at, there are several problems
with the USB interface to the Powerware 5115.
1) On some hosts, the UPS doesn't even show up in lsusb output. As far
as I can tell, this happens mainly with AMD-8111 USB controllers and
correlates weakly or not at all wit
After the system starts up, and before you unplug/replug the UPS, can you
see the UPS with lsusb?
What are the permissions on the corresponding /proc/bus/usb/*/* and/or
/dev/bus/usb/*/* nodes for the UPS?
Package: nut-usb
Version: 2.0.4-1
Severity: normal
When the system is booted up, a USB Powerware 5115 is not detected,
as bcmxcp_usb cannot find it.
This causes upsdrvctl (and the rest of nut) to fail.
In order to get the ups detected, the usb cable must be unplugged and replugged
once the system
9 matches
Mail list logo