Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-7 Severity: normal Updating the system from 2.6.24-6 to 2.6.24-7 rendered the system unuseable. After the reboot lilo started but was not able to load the kernel, the system rebooted, entering an infinite boot loop. The update had been done with synaptic.
Fix: Booting from the install CD into the rescue mode, mounting the root partition and the boot partition (root and boot live in different partitions here) and issuing the command "lilo" allowed the system to boot normal again. Afterwards I remembered that I had seen no "lilo" command in synaptics terminal window. Previous kernel updates within the 2.6.24 kernel series had not shown this defect. -- Package-specific info: ** Version: Linux version 2.6.24-1-amd64 (Debian 2.6.24-7) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Sat May 10 09:28:10 UTC 2008 ** Command line: auto BOOT_IMAGE=Linux ro root=803 ** Tainted: P (1) ** Kernel log: skge 1.13 addr 0xfdef8000 irq 19 chip Yukon-Lite rev 9 skge eth0: addr 00:30:1b:42:98:ad ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19 ata2: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered ata1.00: ATA-7: ST3400833NS, 3.AEH, max UDMA/133 ata1.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3400833NS 3.AE PQ: 0 ANSI: 5 ICH7: IDE controller (0x8086:0x27df rev 0x01) at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:pio ICH7: IDE port disabled Probing IDE interface ide0... Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk firewire_core: created new fw device fw0 (0 config rom retries, S400) hda: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 pnp: the driver 'parport_pc' has been registered parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) parport_pc 00:07: driver attached input: Power Button (FF) as /class/input/input3 intel_rng: FWH not detected ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... input: ImExPS/2 Generic Explorer Mouse as /class/input/input5 Adding 2931852k swap on /dev/sda2. Priority:-1 extents:1 across:2931852k EXT3 FS on sda3, internal journal loop: module loaded nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]> NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready skge eth0: Link is up at 1000 Mbps, full duplex, flow control both ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present NET: Registered protocol family 4 NET: Registered protocol family 3 NET: Registered protocol family 5 ** Loaded modules: Module Size Used by appletalk 42384 2 ax25 62468 2 ipx 33736 2 p8023 6656 1 ipx binfmt_misc 17292 1 rfcomm 46240 2 l2cap 29568 9 rfcomm bluetooth 65956 4 rfcomm,l2cap ppdev 13832 0 lp 17476 0 ac 11400 0 battery 19976 0 ipv6 286248 35 microcode 16792 0 firmware_class 15104 1 microcode fuse 53680 1 nvidia 8855748 24 firewire_sbp2 20624 0 loop 22788 0 snd_hda_intel 362152 1 snd_pcm_oss 46624 0 snd_mixer_oss 21376 1 snd_pcm_oss snd_pcm 89352 2 snd_hda_intel,snd_pcm_oss snd_timer 28552 1 snd_pcm i2c_i801 14108 0 snd 65896 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer i2c_core 29824 2 nvidia,i2c_i801 soundcore 13216 1 snd button 13984 0 psmouse 45724 0 snd_page_alloc 15248 2 snd_hda_intel,snd_pcm iTCO_wdt 17488 0 intel_agp 32288 0 parport_pc 42408 1 parport 44812 3 ppdev,lp,parport_pc serio_raw 11908 0 evdev 17024 3 pcspkr 7808 0 ext3 139024 3 jbd 55976 1 ext3 mbcache 13952 1 ext3 dm_mirror 27008 0 dm_snapshot 21960 0 dm_mod 67832 5 dm_mirror,dm_snapshot ide_cd 44704 0 cdrom 39464 1 ide_cd sd_mod 33536 5 piix 13316 0 [permanent] generic 9732 0 [permanent] ide_core 144920 3 ide_cd,piix,generic ata_piix 25348 5 ata_generic 13060 0 skge 47248 0 firewire_ohci 24192 0 firewire_core 49472 2 firewire_sbp2,firewire_ohci crc_itu_t 6656 1 firewire_core libata 162992 2 ata_piix,ata_generic scsi_mod 170296 3 firewire_sbp2,sd_mod,libata ehci_hcd 39692 0 uhci_hcd 30112 0 thermal 22688 0 processor 45032 1 thermal fan 9864 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at ff00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fe00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at fc00 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: intel-rng, iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fb00 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: ata_generic, generic, piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at fa00 [size=8] Region 1: I/O ports at f900 [size=4] Region 2: I/O ports at f800 [size=8] Region 3: I/O ports at f700 [size=4] Region 4: I/O ports at f600 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic, generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GS] [10de:0392] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:8214] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at fc000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb 02:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10) Subsystem: Elitegroup Computer Systems Device [1019:3044] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at ef00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 02:0b.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5093] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 23 (5750ns min, 7750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at ec00 [size=256] [virtual] Expansion ROM at fdd00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: skge Kernel modules: skge -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.24-1-amd64 recommends no packages. -- debconf information: linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]