Package: rt2860-modules-2.6.26-1-686
Version: 2.6.26+1.8.0.0-3
Severity: important
Hi there,
rt2860sta doesn't work in my eeepc 1000, when configured with a 26 hex-digit
wep key. Here's a snippet from dmesg:
[ 1273.424285] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1273.432800] 3. Phy Mode = 9
[ 1273.439617] MCS Set = ff ff 00 00 01
[ 1273.441244] <==== RTMPInitialize, Status=0
[ 1273.441325] 0x1300 = 00064300
[ 1283.920632] ra0: no IPv6 routers present
[ 1318.496988] RX DESC f3924000 size = 2048
[ 1318.496988] <-- RTMPAllocTxRxRingMemory, Status=0
[ 1318.502640] I/F(ra0) Key1Str is Invalid key length! KeyLen = 0!
[ 1318.502687] I/F(ra0) Key2Str is Invalid key length! KeyLen = 0!
[ 1318.504660] I/F(ra0) Key3Str is Invalid key length! KeyLen = 0!
[ 1318.504706] I/F(ra0) Key4Str is Invalid key length! KeyLen = 0!
[ 1318.506214] 1. Phy Mode = 9
[ 1318.506214] 2. Phy Mode = 9
[ 1318.526207] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 1318.533511] 3. Phy Mode = 9
[ 1318.538209] MCS Set = ff ff 00 00 01
[ 1318.540909] <==== RTMPInitialize, Status=0
[ 1318.540992] 0x1300 = 00064300
[ 1329.015644] ra0: no IPv6 routers present
Also, iwconfig (when ran manually and through ifup) seems to fail to set any
of the interface's properties (essid, ap, etc):
$ sudo /sbin/iwconfig ra0 essid linksys-sez
$ /sbin/iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
$ sudo ifup ra0
Error for wireless request "Set AP Address" (8B14) :
SET failed on device ra0 ; Network is down.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device ra0 ; Network is down.
Error for wireless request "Set Frequency" (8B04) :
SET failed on device ra0 ; Network is down.
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device ra0 ; Network is down.
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/ra0/00:22:43:43:51:06
Sending on LPF/ra0/00:22:43:43:51:06
Sending on Socket/fallback
DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7
[..]
Thanks,
Serafeim
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=el_GR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages rt2860-modules-2.6.26-1-686 depends on:
ii linux-image-2.6.26-1-686 [lin 2.6.26-13 Linux 2.6.26 image on PPro/Celeron
rt2860-modules-2.6.26-1-686 recommends no packages.
rt2860-modules-2.6.26-1-686 suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
