Package: src:linux Version: 3.2.41-2+deb7u2 Severity: important
* This is a "clean upgraded" Debian, from recent Debian-6 installation * since OpenVZ is missing, I've installed LXC packages, did lxc-create and lxc-start * What was the outcome: lxc-start: No cgroup mounted on the system; lxc-start: failed to spawn ... * What you've expected: lxc-start: OK. lcx-checkconfig reports some missing components: --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: CONFIG_CGROUP_NSmissing ^^^^^^^ Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/bronek-root ro quiet ** Not tainted ** Kernel log: [ 1.268111] cciss 0000:04:03.0: cciss0: <0x46> at PCI 0000:04:03.0 IRQ 19 using DAC [ 1.295566] cciss/c0d0: p1 p2 < p5 > [ 1.296193] scsi0 : cciss [ 1.336075] libata version 3.00 loaded. [ 1.336826] ata_piix 0000:00:1f.1: version 2.13 [ 1.336840] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.336847] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A [ 1.336907] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.337425] scsi1 : ata_piix [ 1.337574] scsi2 : ata_piix [ 1.337660] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 [ 1.337663] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 [ 1.354255] e1000 0000:0a:01.0: eth1: (PCI-X:133MHz:64-bit) 00:0e:0c:b3:c8:0c [ 1.354267] e1000 0000:0a:01.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.354300] e1000 0000:0a:01.1: PCI IRQ 98 -> rerouted to legacy IRQ 18 [ 1.366788] tg3 0000:03:01.1: eth2: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:13:21:f1:98:c8 [ 1.366793] tg3 0000:03:01.1: eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.366797] tg3 0000:03:01.1: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.366801] tg3 0000:03:01.1: eth2: dma_rwctrl[769f4000] dma_mask[64-bit] [ 1.500301] ata1.00: ATAPI: CD-224E, 9.9A, max MWDMA2 [ 1.516188] ata1.00: configured for MWDMA2 [ 1.518567] scsi 1:0:0:0: CD-ROM TEAC CD-224E 9.9A PQ: 0 ANSI: 5 [ 1.528605] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 1.528612] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.528914] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.532694] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.662086] e1000 0000:0a:01.1: eth3: (PCI-X:133MHz:64-bit) 00:0e:0c:b3:c8:0d [ 1.662095] e1000 0000:0a:01.1: eth3: Intel(R) PRO/1000 Network Connection [ 1.696033] Refined TSC clocksource calibration: 3600.127 MHz. [ 1.696041] Switching to clocksource tsc [ 4.096034] floppy0: no floppy controllers found [ 4.490356] device-mapper: uevent: version 1.0.3 [ 4.490513] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-de...@redhat.com [ 5.112066] PM: Starting manual resume from disk [ 5.112073] PM: Hibernation image partition 254:1 present [ 5.112076] PM: Looking for hibernation image. [ 5.127116] PM: Image not found (code -22) [ 5.127120] PM: Hibernation image not present or could not be loaded. [ 7.066583] udevd[325]: starting version 175 [ 7.367739] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.392084] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 7.392100] ACPI: Power Button [PWRF] [ 7.510939] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 7.594905] Floppy drive(s): fd0 is 1.44M [ 7.604970] udevd[348]: renamed network interface eth2 to rename4 [ 7.620842] udevd[341]: renamed network interface eth1 to eth2 [ 7.696801] udevd[348]: renamed network interface rename4 to eth1 [ 7.787765] hpwdt 0000:01:04.0: This server does not have an iLO2+ ASIC. [ 7.793807] EDAC MC: Ver: 2.1.0 [ 7.983508] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden [ 7.992558] Error: Driver 'pcspkr' is already registered, aborting... [ 8.105060] intel_rng: FWH not detected [ 8.156460] iTCO_vendor_support: vendor-support=0 [ 8.175934] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 8.176145] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 8.339831] psmouse serio1: bad data from KBC - timeout [ 8.364916] psmouse serio1: bad data from KBC - timeout [ 8.390003] psmouse serio1: bad data from KBC - timeout [ 8.415076] psmouse serio1: bad data from KBC - timeout [ 8.950310] psmouse serio1: bad data from KBC - timeout [ 8.975385] psmouse serio1: bad data from KBC - timeout [ 9.000468] psmouse serio1: bad data from KBC - timeout [ 9.535712] psmouse serio1: bad data from KBC - timeout [ 9.560783] psmouse serio1: bad data from KBC - timeout [ 9.585861] psmouse serio1: bad data from KBC - timeout [ 10.156144] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3 [ 10.171622] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 10.616038] floppy0: no floppy controllers found [ 11.947679] loop: module loaded [ 13.522394] Adding 2895868k swap on /dev/mapper/bronek-swap_1. Priority:-1 extents:1 across:2895868k [ 14.532334] JFS: nTxBlock = 8192, nTxLock = 65536 [ 17.121049] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 17.124455] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 17.125156] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 17.850067] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.891712] tg3 0000:03:01.1: firmware: agent loaded tigon/tg3_tso.bin into memory [ 18.261249] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 18.264616] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 18.337415] RPC: Registered named UNIX socket transport module. [ 18.337422] RPC: Registered udp transport module. [ 18.337425] RPC: Registered tcp transport module. [ 18.337428] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.401988] FS-Cache: Loaded [ 18.480799] FS-Cache: Netfs 'nfs' registered for caching [ 18.525854] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 19.991682] tg3 0000:03:01.1: eth1: Link is up at 100 Mbps, full duplex [ 19.991688] tg3 0000:03:01.1: eth1: Flow control is off for TX and off for RX [ 19.992283] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 20.259585] tg3 0000:03:01.0: eth0: Link is up at 1000 Mbps, full duplex [ 20.259592] tg3 0000:03:01.0: eth0: Flow control is off for TX and off for RX [ 20.260266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.982558] Ebtables v2.0 registered [ 23.399390] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.727357] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 28.128013] eth2: no IPv6 routers present [ 30.024010] eth1: no IPv6 routers present [ 30.304009] eth0: no IPv6 routers present [ 33.358431] postgres (2510): /proc/2510/oom_adj is deprecated, please use /proc/2510/oom_score_adj instead. [ 37.461324] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 56.043063] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 ** Model information sys_vendor: HP product_name: ProLiant DL380 G4 product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: P51 ** Loaded modules: xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc jfs loop iTCO_wdt iTCO_vendor_support e752x_edac rng_core snd_pcm snd_page_alloc psmouse edac_core hpwdt evdev hpilo snd_timer snd soundcore serio_raw pcspkr container button shpchp processor ext2 mbcache dm_mod sg sr_mod cdrom ata_generic ata_piix libata cciss scsi_mod uhci_hcd e1000 thermal thermal_sys ehci_hcd tg3 libphy usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c) Subsystem: Compaq Computer Corporation Device [0e11:3200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fdd00000-fdefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C [8086:3599] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 3000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 3020 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 3040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 3060 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00001000-00002fff Memory behind bridge: fbf00000-fcffffff Prefetchable memory behind bridge: f0200000-f02fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 0500 [size=16] Region 5: Memory at f0300000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 01:03.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at f0200000 [disabled] [size=128K] Capabilities: <access denied> 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01) Subsystem: Compaq Computer Corporation Device [0e11:b206] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 7 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01) Subsystem: Compaq Computer Corporation Device [0e11:b206] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at 2400 [size=256] Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K] Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at f0220000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: hpilo 02:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 02:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 03:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 03:01.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 04:03.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01) Subsystem: Compaq Computer Corporation Smart Array 6i [0e11:4091] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=8K] Region 2: I/O ports at 4000 [size=256] Region 3: Memory at fde80000 (64-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at f0000000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: cciss 05:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=05, secondary=06, subordinate=09, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 05:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=05, secondary=0a, subordinate=0c, sec-latency=64 I/O behind bridge: 00005000-00005fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0a:01.0 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03) Subsystem: Intel Corporation Device [8086:118a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fdfe0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 5000 [size=64] [virtual] Expansion ROM at f0100000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: e1000 0a:01.1 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03) Subsystem: Intel Corporation Device [8086:118a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fdf60000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 5040 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: * linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org