Package: src:linux
Version: 3.16.5-1~bpo70+1
Severity: normal
Tags: upstream
Hello,
3.16 from wheezy-backports causes video corruption on my radeon rs880.
During updates, flickering multicolored lines move down my screen. It
is probably too quick to get a screenshot. Larger updates cause worse
problems. Sometimes, the display will go blank for a few seconds, and
then return on its own. Nothing shows up in Xorg logs or dmesg.
This didn't happen in 3.2 from wheezy, 3.14 from wheezy-backports, or
3.14 upstream.
All of the following were affected:
3.15-rc1, upstream
3.15, wheezy-backports
3.17, experimental
3.18-rc6, upstream
I tried to bisect 3.14 and 3.15-rc1, but couldn't get a kernel stable
enough to load an X desktop.
Ross
-- Package-specific info:
** Version:
Linux version 3.16-0.bpo.3-amd64 (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.5-1~bpo70+1 (2014-11-02)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-0.bpo.3-amd64
root=UUID=a2550452-7808-451e-8f22-b7a47b98b765 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 5.700504] Console: switching to colour frame buffer device 240x67
[ 5.718880] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 5.718883] radeon 0000:01:05.0: registered panic notifier
[ 5.726582] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on
minor 0
[ 5.751681] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card2/input14
[ 8.328567] floppy0: no floppy controllers found
[ 8.685280] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1
across:4194300k FS
[ 8.706742] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 8.878836] EXT4-fs (sdb1): re-mounted. Opts: discard
[ 8.907150] loop: module loaded
[ 9.912841] BTRFS: device label chroot devid 1 transid 939 /dev/dm-4
[ 11.371761] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
discard
[ 11.536126] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
(null)
[ 11.577381] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 11.597090] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 11.606749] BTRFS info (device dm-4): disk space caching is enabled
[ 11.606759] BTRFS: has skinny extents
[ 12.050378] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.566663] r8169 0000:03:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168d-2.fw
[ 12.621438] r8169 0000:03:00.0 eth0: link down
[ 12.621568] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.866431] wlan0: authenticate with f8:d1:11:ac:62:0a
[ 13.881174] wlan0: send auth to f8:d1:11:ac:62:0a (try 1/3)
[ 13.883370] wlan0: authenticated
[ 13.885150] wlan0: associate with f8:d1:11:ac:62:0a (try 1/3)
[ 13.889215] wlan0: RX AssocResp from f8:d1:11:ac:62:0a (capab=0x431 status=0
aid=1)
[ 13.889303] wlan0: associated
[ 13.889322] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.889479] cfg80211: Calling CRDA for country: US
[ 13.898520] cfg80211: Regulatory domain changed to country: US
[ 13.898529] cfg80211: DFS Master region: unset
[ 13.898538] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.898545] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000
mBm), (N/A)
[ 13.898551] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700
mBm), (N/A)
[ 13.898557] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300
mBm), (0 s)
[ 13.898562] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000
mBm), (N/A)
[ 13.898567] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 14.526051] tun: Universal TUN/TAP device driver, 1.6
[ 14.526055] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 14.538212] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 14.775297] RPC: Registered named UNIX socket transport module.
[ 14.775302] RPC: Registered udp transport module.
[ 14.775303] RPC: Registered tcp transport module.
[ 14.775305] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.782151] FS-Cache: Loaded
[ 14.793413] FS-Cache: Netfs 'nfs' registered for caching
[ 14.806351] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 15.538666] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 15.538965] NFSD: starting 90-second grace period (net ffffffff818b7800)
[ 16.269777] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input15
[ 16.408946] Bluetooth: Core ver 2.19
[ 16.408967] NET: Registered protocol family 31
[ 16.408969] Bluetooth: HCI device and connection manager initialized
[ 16.409087] Bluetooth: HCI socket layer initialized
[ 16.409090] Bluetooth: L2CAP socket layer initialized
[ 16.409101] Bluetooth: SCO socket layer initialized
[ 16.416471] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.416475] Bluetooth: BNEP filters: protocol multicast
[ 16.416485] Bluetooth: BNEP socket layer initialized
[ 16.428312] Bluetooth: RFCOMM TTY layer initialized
[ 16.428328] Bluetooth: RFCOMM socket layer initialized
[ 16.428335] Bluetooth: RFCOMM ver 1.11
[ 16.831740] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.847724] lp: driver loaded but no devices found
[ 16.850242] ppdev: user-space parallel port driver
[ 18.760017] vboxdrv: Found 2 processor cores.
[ 18.765435] vboxdrv: fAsync=0 offMin=0x336 offMax=0xd4e
[ 18.765518] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 18.765519] vboxdrv: Successfully loaded version 4.3.14_Debian (interface
0x001a0007).
[ 18.838746] vboxpci: IOMMU not found (not registered)
[ 23.983076] fuse init (API version 7.23)
[ 233.632717] wlan0: deauthenticated from f8:d1:11:ac:62:0a (Reason:
3=DEAUTH_LEAVING)
[ 233.720110] cfg80211: Calling CRDA to update world regulatory domain
[ 233.729279] cfg80211: World regulatory domain updated:
[ 233.729289] cfg80211: DFS Master region: unset
[ 233.729293] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 233.729301] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 233.729306] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 233.729311] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 233.729316] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000
mBm), (N/A)
[ 233.729322] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 233.729327] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 233.729332] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 233.729337] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 240.286957] wlan0: authenticate with f8:d1:11:ac:62:0a
[ 240.301960] wlan0: direct probe to f8:d1:11:ac:62:0a (try 1/3)
[ 240.505715] wlan0: send auth to f8:d1:11:ac:62:0a (try 2/3)
[ 240.509264] wlan0: authenticated
[ 240.509748] wlan0: associate with f8:d1:11:ac:62:0a (try 1/3)
[ 240.513832] wlan0: RX AssocResp from f8:d1:11:ac:62:0a (capab=0x431 status=0
aid=1)
[ 240.513915] wlan0: associated
[ 240.514456] cfg80211: Calling CRDA for country: US
[ 240.523663] cfg80211: Regulatory domain changed to country: US
[ 240.523672] cfg80211: DFS Master region: unset
[ 240.523676] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 240.523684] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000
mBm), (N/A)
[ 240.523689] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700
mBm), (N/A)
[ 240.523695] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300
mBm), (0 s)
[ 240.523700] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000
mBm), (N/A)
[ 240.523705] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
** Model information
sys_vendor: BIOSTAR Group
product_name: TA785GE 128M
product_version:
chassis_vendor: BIOSTAR Group
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 080015
board_vendor: BIOSTAR Group
board_name: TA785GE 128M
board_version:
** Loaded modules:
fuse
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
parport_pc
ppdev
lp
parport
xt_multiport
iptable_filter
ip_tables
x_tables
rfcomm
bnep
bluetooth
6lowpan_iphc
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
tun
ctr
ccm
dm_crypt
loop
snd_hda_codec_hdmi
snd_usb_audio
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
joydev
snd_hda_codec_realtek
snd_hda_codec_generic
kvm_amd
k10temp
evdev
arc4
edac_mce_amd
psmouse
edac_core
serio_raw
kvm
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_seq
snd_seq_device
snd_pcm
sp5100_tco
i2c_piix4
snd_timer
radeon
ath9k
ath9k_common
ath9k_hw
ath
ttm
mac80211
drm_kms_helper
snd
drm
i2c_algo_bit
i2c_core
soundcore
cfg80211
rfkill
shpchp
acpi_cpufreq
wmi
button
processor
ext4
crc16
mbcache
jbd2
crc32c_generic
btrfs
xor
hid_lenovo_tpkbd
raid6_pq
dm_mod
md_mod
hid_generic
sg
sd_mod
crct10dif_generic
crc_t10dif
crct10dif_common
ata_generic
usbhid
hid
usb_storage
thermal
thermal_sys
pata_atiixp
ahci
libahci
r8169
mii
ehci_pci
ohci_pci
ohci_hcd
ehci_hcd
usbcore
usb_common
libata
scsi_mod
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 10.23.23.17
netmask 255.255.255.248
iface eth0 inet6 auto
auto wlan0
iface wlan0 inet static
address 10.23.5.5
netmask 255.255.255.128
gateway 10.23.5.1
dns-search kallisti.us
dns-nameservers 10.23.5.1
wpa-ssid fnords
wpa-psk **********
iface wlan0 inet6 auto
auto tap0
iface tap0 inet static
address 10.23.23.9
netmask 255.255.255.248
pre-up /sbin/ip tuntap add tap0 mode tap user ross
post-down /sbin/ip tuntap del tap0 mode tap
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:30:67:2f:42:05 brd ff:ff:ff:ff:ff:ff
inet 10.23.23.17/29 brd 10.23.23.23 scope global eth0
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether f8:1a:67:ab:1d:48 brd ff:ff:ff:ff:ff:ff
inet 10.23.5.5/25 brd 10.23.5.127 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fd5d:ca24:25b8:0:fa1a:67ff:feab:1d48/64 scope global dynamic
valid_lft 7058sec preferred_lft 1658sec
inet6 2601:d:ca00:71:fa1a:67ff:feab:1d48/64 scope global dynamic
valid_lft 7058sec preferred_lft 1658sec
inet6 fe80::fa1a:67ff:feab:1d48/64 scope link
valid_lft forever preferred_lft forever
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 500
link/ether d6:b0:32:02:c6:b9 brd ff:ff:ff:ff:ff:ff
inet 10.23.23.9/29 brd 10.23.23.15 scope global tap0
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 4917901 5191 0 0 0 0 0 0 688627
4019 0 0 0 0 0 0
tap0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 24324 180 0 0 0 0 0 0 24324
180 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2053 total packets received
0 forwarded
0 incoming packets discarded
2053 incoming packets delivered
2029 requests sent out
40 outgoing packets dropped
Icmp:
604 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 40
echo requests: 1
echo replies: 563
653 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 49
echo request: 603
echo replies: 1
IcmpMsg:
InType0: 563
InType3: 40
InType8: 1
OutType0: 1
OutType3: 49
OutType8: 603
Tcp:
26 active connections openings
8 passive connection openings
1 failed connection attempts
2 connection resets received
3 connections established
4031 segments received
2776 segments send out
15 segments retransmited
0 bad segments received.
4 resets sent
Udp:
554 packets received
49 packets to unknown port received.
0 packet receive errors
577 packets sent
UdpLite:
TcpExt:
1 resets received for embryonic SYN_RECV sockets
9 TCP sockets finished time wait in fast timer
57 delayed acks sent
212 packets directly queued to recvmsg prequeue.
3562 bytes directly received in process context from prequeue
3048 packet headers predicted
205 packets header predicted and directly queued to user
184 acknowledgments not containing data payload received
370 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
1 fast retransmits
1 forward retransmits
3 other TCP timeouts
TCPLossProbes: 3
2 connections reset due to early user close
TCPSackShiftFallback: 1
TCPDeferAcceptDrop: 6
TCPRcvCoalesce: 1567
TCPAutoCorking: 249
TCPOrigDataSent: 658
IpExt:
InMcastPkts: 68
OutMcastPkts: 70
InOctets: 220646
OutOctets: 360700
InMcastOctets: 16513
OutMcastOctets: 16692
InNoECTPkts: 2053
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]
Subsystem: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI
1.0])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA
Controller [AHCI mode] [1002:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB
OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 3c)
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
(Intel HDA) [1002:4383]
Subsystem: Biostar Microtech Int'l Corp Device [1565:8218]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device [1565:3700]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7f6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RS880 [Radeon HD 4200] [1002:9710] (prog-if 00 [VGA controller])
Subsystem: Biostar Microtech Int'l Corp Device [1565:1704]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI
Audio [Radeon HD 4200 Series] [1002:970f]
Subsystem: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio
[Radeon HD 4200 Series] [1002:970f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9287 Wireless
Network Adapter (PCI-Express) [168c:002e] (rev 01)
Subsystem: Atheros Communications Inc. Device [168c:30a4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E
Adapter [Trendnet] [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at febe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 001 Device 005: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse
Bus 001 Device 006: ID 17ef:6009 Lenovo ThinkPad Keyboard with TrackPoint
Bus 006 Device 004: ID 0bc2:3008 Seagate RSS LLC
Bus 006 Device 005: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link
DUB-H4 USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 006: ID 046d:081d Logitech, Inc. HD Webcam C510
-- System Information:
Debian Release: 7.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable'), (50, 'testing'), (40,
'unstable'), (30, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-0.bpo.3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-0.bpo.3-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.16-0.bpo.3-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.16-0.bpo.3-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-0.bpo.3-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43~bpo70+1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-0.bpo.3-amd64/postinst/mips-initrd-3.16-0.bpo.3-amd64:
linux-image-3.16-0.bpo.3-amd64/postinst/depmod-error-initrd-3.16-0.bpo.3-amd64:
false
linux-image-3.16-0.bpo.3-amd64/prerm/removing-running-kernel-3.16-0.bpo.3-amd64:
true
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
