Package: src:linux Version: 4.3-1~exp1 Severity: normal Dear Debian folks,
starting with Linux 4.3 the following message is printed to the screen during start. Failed to find cpu0 device node In ticket #1254210 in the Red Hat Bugzilla [1], Josh Boyer writes the following. > This is a warning message from the OF layer in the kernel. Since i686 > has CONFIG_OF enabled (for OLPC reasons) and your machine doesn't > utilize OF or device trees, it errors out. There's nothing actually > wrong here. If nothing is actually wrong, should the message even be shown? Thanks, Paul [1] https://bugzilla.redhat.com/show_bug.cgi?id=1254210 -- Package-specific info: ** Version: Linux version 4.3.0-trunk-686 (debian-ker...@lists.debian.org) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #1 SMP Debian 4.3-1~exp1 (2015-11-04) ** Command line: BOOT_IMAGE=/vmlinuz-4.3.0-trunk-686 root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 ** Not tainted ** Kernel log: [attached] ** Model information not available ** Loaded modules: ctr ccm cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats pcmcia arc4 iTCO_wdt iTCO_vendor_support coretemp kvm_intel iwl3945 kvm iwlegacy mac80211 psmouse evdev cfg80211 yenta_socket i915 lpc_ich serio_raw pcmcia_rsrc pcmcia_core i2c_i801 nsc_ircc rng_core snd_hda_codec_analog snd_hda_codec_generic thinkpad_acpi irda snd_hda_intel 8250_fintek drm_kms_helper battery snd_hda_codec nvram crc_ccitt rfkill snd_hda_core ac drm snd_hwdep snd_pcm snd_timer i2c_algo_bit fb_sys_fops tpm_tis syscopyarea snd sysfillrect tpm video sysimgblt soundcore shpchp button acpi_cpufreq processor hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 ecb jitterentropy_rng sha256_generic hmac drbg ansi_cprng cbc algif_skcipher af_alg dm_crypt dm_mod sg sd_mod ata_generic sdhci_pci sdhci mmc_core ahci libahci ata_piix firewire_ohci firewire_core crc_itu_t libata scsi_mod ehci_pci e1000e ptp pps_core thermal uhci_hcd ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:2017] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:201a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:201a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at ee180000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 30 Region 0: Memory at ee240000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: ee000000-ee0fffff Prefetchable memory behind bridge: 0000000080000000-00000000801fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00003000-00004fff Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0 I/O behind bridge: 00005000-00006fff Memory behind bridge: e8000000-e9ffffff Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0 I/O behind bridge: 00007000-00008fff Memory behind bridge: ea000000-ebffffff Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at ee444000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=15, subordinate=18, sec-latency=32 I/O behind bridge: 00009000-0000cfff Memory behind bridge: e4300000-e7ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:2009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin C routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 29 Region 0: I/O ports at 18d0 [size=8] Region 1: I/O ports at 18c4 [size=4] Region 2: I/O ports at 18c8 [size=8] Region 3: I/O ports at 18c0 [size=4] Region 4: I/O ports at 18b0 [size=16] Region 5: Memory at ee444400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Lenovo ThinkPad R60/T60/X60 series [17aa:200f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 18e0 [size=32] Kernel driver in use: i801_smbus 02:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a] Subsystem: Lenovo ThinkPad X60/X60s [17aa:207e] Physical Slot: 2 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 28 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [disabled] [size=128K] Region 2: I/O ports at 2000 [disabled] [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02) Subsystem: Intel Corporation Device [8086:1010] Physical Slot: 3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: Memory at edf00000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4) Subsystem: Lenovo ThinkPad X60/X60s [17aa:201c] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K] Bus: primary=15, secondary=16, subordinate=17, sec-latency=176 Memory window 0: e0000000-e3ffffff (prefetchable) Memory window 1: f4000000-f7ffffff I/O window 0: 00009000-000090ff I/O window 1: 00009400-000094ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Capabilities: <access denied> Kernel driver in use: yenta_cardbus 15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 09) (prog-if 10 [OHCI]) Subsystem: Lenovo ThinkPad X60/X60s [17aa:201e] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at e4301000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18) Subsystem: Lenovo ThinkPad X60/X60s [17aa:201d] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin C routed to IRQ 18 Region 0: Memory at e4301800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci ** USB devices: Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.2 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 4.3.0-trunk-686 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.3.0-trunk-686 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-4.3.0-trunk-686 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 ii libc6-i686 2.19-18+deb8u1 Versions of packages linux-image-4.3.0-trunk-686 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-22 pn linux-doc-4.3 <none> Versions of packages linux-image-4.3.0-trunk-686 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.43 pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.43 ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information excluded -- go~mus | Besuchermanagement ▶ 18. – 20. November 2015 // Messe Köln – Stand D054 Besuchen Sie uns auf der EXPONATEC und lernen Sie die Software für Besuchermanagement kennen, die von führenden Museumsverbänden in Europa eingesetzt wird. Mehr Infos über go~mus finden Sie unter https://www.gomus.de ~ GPG-Schlüssel: 33623E9B Fingerabdruck = 0EB1 649D 4361 D04F 3C70 6F71 4DD7 BF75 3362 3E9B Giant Monkey Software Engineering GmbH Brunnenstr. 7D 10119 Berlin Mitte Geschäftsführer Adrian Fuhrmann, Lion Vollnhals und Paul Menzel USt-IdNr.: DE281524720 HRB 139495 B Amtsgericht Charlottenburg
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.0-trunk-686 (debian-ker...@lists.debian.org) (gcc version 5.2.1 20151028 (Debian 5.2.1-23) ) #1 SMP Debian 4.3-1~exp1 (2015-11-04) [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6cffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f6d0000-0x000000007f6defff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f6df000-0x000000007f6fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: LENOVO 636338U/636338U, BIOS 7JET23WW (1.08 ) 04/18/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] found SMP MP-table at [mem 0x000f67f0-0x000f67ff] mapped at [c00f67f0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 4M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x36ffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x36ffffff] page 4M [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x01817000, 0x01817fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35f4e000-0x36f9efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F67B0 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x000000007F6D1296 00008C (v01 LENOVO TP-7J 00001080 LTP 00000000) [ 0.000000] ACPI: FACP 0x000000007F6D1400 0000F4 (v03 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150818/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20150818/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20150818/tbfadt-654) [ 0.000000] ACPI: DSDT 0x000000007F6D1790 00D4C1 (v01 LENOVO TP-7J 00001080 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x000000007F6F4000 000040 [ 0.000000] ACPI: FACS 0x000000007F6F4000 000040 [ 0.000000] ACPI: SSDT 0x000000007F6D15B4 0001DC (v01 LENOVO TP-7J 00001080 MSFT 0100000E) [ 0.000000] ACPI: ECDT 0x000000007F6DEC51 000052 (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: TCPA 0x000000007F6DECA3 000032 (v02 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: APIC 0x000000007F6DECD5 000068 (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: MCFG 0x000000007F6DED3D 00003C (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: HPET 0x000000007F6DED79 000038 (v01 LENOVO TP-7J 00001080 LNVO 00000001) [ 0.000000] ACPI: SLIC 0x000000007F6DEE62 000176 (v01 LENOVO TP-7J 00001080 LTP 00000000) [ 0.000000] ACPI: BOOT 0x000000007F6DEFD8 000028 (v01 LENOVO TP-7J 00001080 LTP 00000001) [ 0.000000] ACPI: SSDT 0x000000007F6F2645 00025F (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: SSDT 0x000000007F6F28A4 0000A6 (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: SSDT 0x000000007F6F294A 0004F7 (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: SSDT 0x000000007F6F2E41 0001D8 (v01 LENOVO TP-7J 00001080 INTL 20050513) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f6cffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f6cffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6cffff] [ 0.000000] On node 0 totalpages: 521838 [ 0.000000] free_area_init_node: node 0, pgdat c16dd800, node_mem_map f4d60024 [ 0.000000] DMA zone: 36 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1962 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 294610 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77d0000 s39884 r0 d29748 u69632 [ 0.000000] pcpu-alloc: s39884 r0 d29748 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519840 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.3.0-trunk-686 root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 [ 0.000000] PCIe ASPM is forcibly enabled [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6d0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2042936K/2087352K available (5013K kernel code, 585K rwdata, 1504K rodata, 644K init, 472K bss, 44416K reserved, 0K cma-reserved, 1178440K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffd36000 - 0xfffff000 (2852 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc16f3000 - 0xc1794000 ( 644 kB) .data : 0xc14e5ae3 - 0xc16f14c0 (2094 kB) .text : 0xc1000000 - 0xc14e5ae3 (5014 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:440 16 [ 0.000000] CPU 0 irqstacks, hard=f702c000 soft=f702e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1662.514 MHz processor [ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.02 BogoMIPS (lpj=6650056) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004029] ACPI: Core revision 20150818 [ 0.027703] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.027738] Security Framework initialized [ 0.027742] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.027753] AppArmor: AppArmor disabled by boot time parameter [ 0.027771] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.027774] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.028106] Initializing cgroup subsys io [ 0.028115] Initializing cgroup subsys memory [ 0.028122] Initializing cgroup subsys devices [ 0.028128] Initializing cgroup subsys freezer [ 0.028133] Initializing cgroup subsys net_cls [ 0.028138] Initializing cgroup subsys perf_event [ 0.028141] Initializing cgroup subsys net_prio [ 0.028167] Disabled fast string operations [ 0.028171] CPU: Physical Processor ID: 0 [ 0.028173] CPU: Processor Core ID: 0 [ 0.028180] mce: CPU supports 6 MCE banks [ 0.028193] CPU0: Thermal monitoring enabled (TM2) [ 0.028197] process: using mwait in idle threads [ 0.028206] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2 [ 0.028209] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0 [ 0.028473] Freeing SMP alternatives memory: 20K (c1794000 - c1799000) [ 0.032011] ftrace: allocating 21915 entries in 43 pages [ 0.044015] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088000] smpboot: CPU0: Intel(R) Core(TM) Duo CPU L2400 @ 1.66GHz (family: 0x6, model: 0xe, stepping: 0xc) [ 0.088000] Performance Events: Core events, core PMU driver. [ 0.088000] ... version: 1 [ 0.088000] ... bit width: 40 [ 0.088000] ... generic registers: 2 [ 0.088000] ... value mask: 000000ffffffffff [ 0.088000] ... max period: 000000007fffffff [ 0.088000] ... fixed-purpose events: 0 [ 0.088000] ... event mask: 0000000000000003 [ 0.088000] CPU 1 irqstacks, hard=f7146000 soft=f7148000 [ 0.088000] x86: Booting SMP configuration: [ 0.088000] .... node #0, CPUs: #1 [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.098012] TSC synchronization [CPU#0 -> CPU#1]: [ 0.098018] Measured 474390 cycles TSC warp between CPUs, turning off TSC clock. [ 0.098028] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.098124] x86: Booted up 1 node, 2 CPUs [ 0.098128] smpboot: Total of 2 processors activated (6650.05 BogoMIPS) [ 0.099725] devtmpfs: initialized [ 0.100091] PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f6fffff] (135168 bytes) [ 0.100231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.100290] pinctrl core: initialized pinctrl subsystem [ 0.100290] NET: Registered protocol family 16 [ 0.108007] cpuidle: using governor ladder [ 0.116006] cpuidle: using governor menu [ 0.116099] Simple Boot Flag at 0x35 set to 0x1 [ 0.116181] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.116184] ACPI: bus type PCI registered [ 0.116187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.116304] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.116308] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.116310] PCI: Using MMCONFIG for extended config space [ 0.116313] PCI: Using configuration type 1 for base access [ 0.128095] ACPI: Added _OSI(Module Device) [ 0.128095] ACPI: Added _OSI(Processor Device) [ 0.128095] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.128095] ACPI: Added _OSI(Processor Aggregator Device) [ 0.133193] ACPI : EC: EC description table is found, configuring boot EC [ 0.133211] ACPI : EC: EC started [ 0.144543] ACPI: Dynamic OEM Table Load: [ 0.144554] ACPI: SSDT 0x00000000F71A6000 000240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.145441] ACPI: Dynamic OEM Table Load: [ 0.145452] ACPI: SSDT 0x00000000F71B4800 0006B4 (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.146637] ACPI: Dynamic OEM Table Load: [ 0.146645] ACPI: SSDT 0x00000000F710C100 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.147414] ACPI: Dynamic OEM Table Load: [ 0.147422] ACPI: SSDT 0x00000000F7126700 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.148739] ACPI: Interpreter enabled [ 0.148753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.148759] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 0.148780] ACPI: (supports S0 S3 S4 S5) [ 0.148783] ACPI: Using IOAPIC for interrupt routing [ 0.148822] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.153164] ACPI: Power Resource [PUBS] (on) [ 0.153164] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.157897] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.160879] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) [ 0.161431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.161601] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.161767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.161933] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162098] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162264] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162429] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162594] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162778] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.162786] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.163478] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.164007] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.164036] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.164040] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.164044] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.164048] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff window] (ignored) [ 0.164051] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff window] (ignored) [ 0.164055] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored) [ 0.164058] acpi PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff window] (ignored) [ 0.164061] PCI: root bus 00: using default resources [ 0.164066] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.164337] PCI host bridge to bus 0000:00 [ 0.164342] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.164346] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.164350] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.164363] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 [ 0.164522] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000 [ 0.164541] pci 0000:00:02.0: reg 0x10: [mem 0xee100000-0xee17ffff] [ 0.164549] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807] [ 0.164557] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.164565] pci 0000:00:02.0: reg 0x1c: [mem 0xee200000-0xee23ffff] [ 0.164714] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000 [ 0.164729] pci 0000:00:02.1: reg 0x10: [mem 0xee180000-0xee1fffff] [ 0.164931] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.164974] pci 0000:00:1b.0: reg 0x10: [mem 0xee240000-0xee243fff 64bit] [ 0.165067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.165147] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.165237] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.165347] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.165418] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.165508] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.165617] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.165689] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.165779] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.165887] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.165959] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.166049] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.166157] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.166228] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.166317] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.166378] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f] [ 0.166577] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.166577] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.166577] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f] [ 0.166577] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.166577] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.166577] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f] [ 0.166577] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.166577] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.166577] pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f] [ 0.166577] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.166577] pci 0000:00:1d.7: reg 0x10: [mem 0xee444000-0xee4443ff] [ 0.166577] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.168069] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.168161] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.168292] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.168383] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 [ 0.168513] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015] [ 0.168521] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.168527] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.168532] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.168537] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.168686] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.168709] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.168722] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.168735] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.168749] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.168762] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f] [ 0.168789] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.168793] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.168796] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.168799] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.168934] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601 [ 0.168970] pci 0000:00:1f.2: reg 0x10: [io 0x18d0-0x18d7] [ 0.168984] pci 0000:00:1f.2: reg 0x14: [io 0x18c4-0x18c7] [ 0.168997] pci 0000:00:1f.2: reg 0x18: [io 0x18c8-0x18cf] [ 0.169010] pci 0000:00:1f.2: reg 0x1c: [io 0x18c0-0x18c3] [ 0.169024] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf] [ 0.169037] pci 0000:00:1f.2: reg 0x24: [mem 0xee444400-0xee4447ff] [ 0.169077] pci 0000:00:1f.2: PME# supported from D3hot [ 0.169223] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.169303] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff] [ 0.169632] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000 [ 0.169702] pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xee01ffff] [ 0.169745] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.169901] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.176091] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.176098] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.176104] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.176287] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000 [ 0.176415] pci 0000:03:00.0: reg 0x10: [mem 0xedf00000-0xedf00fff] [ 0.176774] pci 0000:03:00.0: PME# supported from D0 D3hot [ 0.184080] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.184087] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 0.184093] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.184103] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.184214] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.184220] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] [ 0.184227] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.184236] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.184333] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.184340] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] [ 0.184346] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.184356] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.184461] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700 [ 0.184502] pci 0000:15:00.0: reg 0x10: [mem 0xe4300000-0xe4300fff] [ 0.184535] pci 0000:15:00.0: supports D1 D2 [ 0.184539] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184653] pci 0000:15:00.1: [1180:0552] type 00 class 0x0c0010 [ 0.184692] pci 0000:15:00.1: reg 0x10: [mem 0xe4301000-0xe43017ff] [ 0.184803] pci 0000:15:00.1: PME# supported from D0 D3hot D3cold [ 0.184909] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500 [ 0.184947] pci 0000:15:00.2: reg 0x10: [mem 0xe4301800-0xe43018ff] [ 0.185058] pci 0000:15:00.2: supports D1 D2 [ 0.185061] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185223] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.185230] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] [ 0.185236] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.185245] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.185249] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.185253] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.185333] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18]) [ 0.185341] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17 [ 0.185385] pci_bus 0000:00: on NUMA node 0 [ 0.185954] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.185954] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.185954] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.185954] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.185954] vgaarb: loaded [ 0.185954] vgaarb: bridge control possible 0000:00:02.0 [ 0.185954] PCI: Using ACPI for IRQ routing [ 0.190014] PCI: pci_cache_line_size set to 64 bytes [ 0.190311] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.190314] e820: reserve RAM buffer [mem 0x7f6d0000-0x7fffffff] [ 0.190633] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.190641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.190648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.192031] clocksource: Switched to clocksource hpet [ 0.203916] pnp: PnP ACPI init [ 0.204787] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.204793] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.204797] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.204801] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.204805] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.204809] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.204812] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.204816] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.204820] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.204824] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.204828] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.204832] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.204836] system 00:00: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.204840] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.204844] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved [ 0.204852] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.205050] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.205055] system 00:01: [io 0x1000-0x107f] could not be reserved [ 0.205059] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.205063] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.205067] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.205071] system 00:01: [io 0x1600-0x165f] could not be reserved [ 0.205075] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.205079] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.205083] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.205087] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.205091] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.205097] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.205206] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.205264] pnp 00:03: Plug and Play ACPI device, IDs LEN0003 PNP0303 (active) [ 0.205319] pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 0.205546] pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled) [ 0.205764] pnp 00:06: Plug and Play ACPI device, IDs WACf004 (active) [ 0.205846] pnp 00:07: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active) [ 0.206720] pnp: PnP ACPI: found 8 devices [ 0.206730] PnPBIOS: Disabled by ACPI PNP [ 0.245725] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.245755] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.245808] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 0.245814] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.245819] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.245827] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.245832] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.245837] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.245845] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff] [ 0.245851] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.245860] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.245865] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 0.245872] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff] [ 0.245879] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.245888] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.245893] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff] [ 0.245900] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff] [ 0.245907] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.245916] pci 0000:00:1c.3: PCI bridge to [bus 0c-13] [ 0.245921] pci 0000:00:1c.3: bridge window [io 0x7000-0x8fff] [ 0.245928] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff] [ 0.245935] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.245947] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245952] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245956] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245960] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000 [ 0.245964] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.245968] pci 0000:15:00.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.245972] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100 [ 0.245976] pci 0000:15:00.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100 [ 0.245981] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref] [ 0.245987] pci 0000:15:00.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff] [ 0.245991] pci 0000:15:00.0: BAR 13: assigned [io 0x9000-0x90ff] [ 0.245995] pci 0000:15:00.0: BAR 14: assigned [io 0x9400-0x94ff] [ 0.245999] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.246002] pci 0000:15:00.0: bridge window [io 0x9000-0x90ff] [ 0.246009] pci 0000:15:00.0: bridge window [io 0x9400-0x94ff] [ 0.246017] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref] [ 0.246024] pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.246031] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.246035] pci 0000:00:1e.0: bridge window [io 0x9000-0xcfff] [ 0.246043] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff] [ 0.246049] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.246059] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.246062] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.246066] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.246070] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff] [ 0.246073] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.246077] pci_bus 0000:03: resource 0 [io 0x3000-0x4fff] [ 0.246081] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff] [ 0.246084] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref] [ 0.246088] pci_bus 0000:04: resource 0 [io 0x5000-0x6fff] [ 0.246091] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff] [ 0.246095] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref] [ 0.246099] pci_bus 0000:0c: resource 0 [io 0x7000-0x8fff] [ 0.246102] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff] [ 0.246106] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref] [ 0.246110] pci_bus 0000:15: resource 0 [io 0x9000-0xcfff] [ 0.246113] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff] [ 0.246117] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.246120] pci_bus 0000:15: resource 4 [io 0x0000-0xffff] [ 0.246124] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffff] [ 0.246128] pci_bus 0000:16: resource 0 [io 0x9000-0x90ff] [ 0.246131] pci_bus 0000:16: resource 1 [io 0x9400-0x94ff] [ 0.246135] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref] [ 0.246138] pci_bus 0000:16: resource 3 [mem 0xf4000000-0xf7ffffff] [ 0.246205] NET: Registered protocol family 2 [ 0.246475] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.246506] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.246556] TCP: Hash tables configured (established 8192 bind 8192) [ 0.246594] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.246606] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.246686] NET: Registered protocol family 1 [ 0.246711] pci 0000:00:02.0: Video device with shadowed ROM [ 0.247018] PCI: CLS 64 bytes, default 64 [ 0.247095] Unpacking initramfs... [ 0.791875] Freeing initrd memory: 16708K (f5f4e000 - f6f9f000) [ 0.792079] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6d38307d, max_idle_ns: 440795214506 ns [ 0.792231] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54 [ 0.792243] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54 [ 0.792356] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 0.792915] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.792972] audit: initializing netlink subsys (disabled) [ 0.793002] audit: type=2000 audit(1446974547.792:1): initialized [ 0.793437] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.793463] zbud: loaded [ 0.793559] VFS: Disk quotas dquot_6.6.0 [ 0.793588] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.794452] bounce: pool size: 64 pages [ 0.794478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.794529] io scheduler noop registered [ 0.794533] io scheduler deadline registered [ 0.794551] io scheduler cfq registered (default) [ 0.796093] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.796097] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.796103] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.796140] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.796144] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.796150] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.796186] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.796192] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 0.796228] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.796234] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.796247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.796269] pciehp 0000:00:1c.0:pcie04: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796316] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.796333] pciehp 0000:00:1c.1:pcie04: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796370] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.796387] pciehp 0000:00:1c.2:pcie04: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796423] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded [ 0.796440] pciehp 0000:00:1c.3:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ [ 0.796475] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.796486] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.796523] intel_idle: does not run on family 6 model 14 [ 0.796569] GHES: HEST is not enabled! [ 0.796579] isapnp: ISA Plug & Play support disabled [ 0.796670] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.796901] 00:06: ttyS0 at I/O 0x200 (irq = 5, base_baud = 921600) is a NS16550A [ 0.797581] Linux agpgart interface v0.103 [ 0.797753] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 0.797771] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 0.798414] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.798595] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.798775] Failed to find cpu0 device node [ 0.798829] Unable to detect cache hierarchy from DT for CPU 0 [ 0.798967] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.810203] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.810213] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.810484] mousedev: PS/2 mouse device common for all mice [ 0.810564] rtc_cmos 00:02: RTC can wake from S4 [ 0.810765] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.810800] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.810846] ledtrig-cpu: registered to indicate activity on CPUs [ 0.811814] NET: Registered protocol family 10 [ 0.812182] mip6: Mobile IPv6 [ 0.812189] NET: Registered protocol family 17 [ 0.812197] mpls_gso: MPLS GSO support [ 0.812524] Using IPI No-Shortcut mode [ 0.812797] registered taskstats version 1 [ 0.812835] zswap: loaded using pool lzo/zbud [ 0.813576] rtc_cmos 00:02: setting system clock to 2015-11-08 09:22:28 UTC (1446974548) [ 0.813710] PM: Hibernation image not present or could not be loaded. [ 0.814010] Freeing unused kernel memory: 644K (c16f3000 - c1794000) [ 0.814049] Write protecting the kernel text: 5016k [ 0.814096] Write protecting the kernel read-only data: 1508k [ 0.817149] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.877669] systemd-udevd[68]: starting version 215 [ 0.878179] random: systemd-udevd urandom read with 2 bits of entropy available [ 0.902698] ACPI: bus type USB registered [ 0.902757] usbcore: registered new interface driver usbfs [ 0.902783] usbcore: registered new interface driver hub [ 0.902970] usbcore: registered new device driver usb [ 0.903715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.904847] uhci_hcd: USB Universal Host Controller Interface driver [ 0.905233] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.905297] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.905312] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.905354] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820 [ 0.905444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.905449] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905453] usb usb1: Product: UHCI Host Controller [ 0.905456] usb usb1: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.905459] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.905716] hub 1-0:1.0: USB hub found [ 0.905728] hub 1-0:1.0: 2 ports detected [ 0.906026] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.906036] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 0.906045] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.906082] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840 [ 0.906156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.906160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906163] usb usb2: Product: UHCI Host Controller [ 0.906167] usb usb2: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.906170] usb usb2: SerialNumber: 0000:00:1d.1 [ 0.906396] hub 2-0:1.0: USB hub found [ 0.906408] hub 2-0:1.0: 2 ports detected [ 0.906818] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.906829] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 0.906840] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.906876] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 0.906945] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.906949] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.906953] usb usb3: Product: UHCI Host Controller [ 0.906956] usb usb3: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.906959] usb usb3: SerialNumber: 0000:00:1d.2 [ 0.907187] hub 3-0:1.0: USB hub found [ 0.907198] hub 3-0:1.0: 2 ports detected [ 0.907486] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.907496] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 0.907505] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.907539] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880 [ 0.907609] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.907613] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907616] usb usb4: Product: UHCI Host Controller [ 0.907619] usb usb4: Manufacturer: Linux 4.3.0-trunk-686 uhci_hcd [ 0.907622] usb usb4: SerialNumber: 0000:00:1d.3 [ 0.907845] hub 4-0:1.0: USB hub found [ 0.907856] hub 4-0:1.0: 2 ports detected [ 0.915647] pps_core: LinuxPPS API ver. 1 registered [ 0.915652] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 0.915943] PTP clock support registered [ 0.917424] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.917430] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.917608] e1000e 0000:02:00.0: Disabling ASPM L1 [ 0.917771] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.918898] ehci-pci: EHCI PCI platform driver [ 0.920107] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.920119] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 0.920138] ehci-pci 0000:00:1d.7: debug port 1 [ 0.922441] SCSI subsystem initialized [ 0.924066] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 0.924515] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.924518] ACPI: Thermal Zone [THM0] (43 C) [ 0.926091] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.926095] ACPI: Thermal Zone [THM1] (45 C) [ 0.926380] ehci-pci 0000:00:1d.7: irq 19, io mem 0xee444000 [ 0.929071] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.929169] libata version 3.00 loaded. [ 0.931947] sdhci: Secure Digital Host Controller Interface driver [ 0.931951] sdhci: Copyright(c) Pierre Ossman [ 0.936136] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.936226] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.936230] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.936234] usb usb5: Product: EHCI Host Controller [ 0.936237] usb usb5: Manufacturer: Linux 4.3.0-trunk-686 ehci_hcd [ 0.936240] usb usb5: SerialNumber: 0000:00:1d.7 [ 0.936519] hub 5-0:1.0: USB hub found [ 0.936535] hub 5-0:1.0: 8 ports detected [ 0.960148] hub 1-0:1.0: USB hub found [ 0.960166] hub 1-0:1.0: 2 ports detected [ 0.984109] hub 2-0:1.0: USB hub found [ 0.984124] hub 2-0:1.0: 2 ports detected [ 0.992105] firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 0.992223] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 18) [ 0.993261] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.993272] sdhci-pci 0000:15:00.2: No vmmc regulator found [ 0.993275] sdhci-pci 0000:15:00.2: No vqmmc regulator found [ 0.994275] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.995463] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 0.996473] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 1.008121] hub 3-0:1.0: USB hub found [ 1.008136] hub 3-0:1.0: 2 ports detected [ 1.030903] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:d3:b8:e3:49 [ 1.030908] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.030987] e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 1.032116] hub 4-0:1.0: USB hub found [ 1.032132] hub 4-0:1.0: 2 ports detected [ 1.032513] ata_piix 0000:00:1f.1: version 2.13 [ 1.034386] scsi host0: ata_piix [ 1.034819] scsi host1: ata_piix [ 1.034928] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 1.034932] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 1.035045] ahci 0000:00:1f.2: version 3.0 [ 1.035234] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.035240] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.036372] scsi host2: ahci [ 1.036541] scsi host3: ahci [ 1.036706] scsi host4: ahci [ 1.036856] ata2: port disabled--ignoring [ 1.036933] scsi host5: ahci [ 1.037056] ata3: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 29 [ 1.037059] ata4: DUMMY [ 1.037061] ata5: DUMMY [ 1.037063] ata6: DUMMY [ 1.356035] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.356451] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.356456] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.356460] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.356775] ata3.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100 [ 1.356779] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.357202] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.357206] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.357211] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.357521] ata3.00: configured for UDMA/100 [ 1.357769] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5 [ 1.363191] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.363299] sd 2:0:0:0: [sda] Write Protect is off [ 1.363304] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.363339] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.363956] sda: sda1 sda2 [ 1.364541] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.365238] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.401480] device-mapper: uevent: version 1.0.3 [ 1.401727] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-de...@redhat.com [ 1.492183] firewire_core 0000:15:00.1: created device fw0: GUID 000ae40700242004, S400 [ 7.280362] NET: Registered protocol family 38 [ 7.553018] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 7.865684] random: nonblocking pool is initialized [ 7.982910] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 7.983001] systemd[1]: Found ordering cycle on basic.target/start [ 7.983007] systemd[1]: Found dependency on sysinit.target/start [ 7.983012] systemd[1]: Found dependency on rpcbind.service/start [ 7.983017] systemd[1]: Found dependency on network-online.target/start [ 7.983022] systemd[1]: Found dependency on network.target/start [ 7.983026] systemd[1]: Found dependency on systemd-networkd.service/start [ 7.983030] systemd[1]: Found dependency on dbus.service/start [ 7.983035] systemd[1]: Found dependency on basic.target/start [ 7.983039] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start [ 7.983045] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start [ 8.570945] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [ 8.674332] lp: driver loaded but no devices found [ 8.677495] ppdev: user-space parallel port driver [ 8.691817] fuse init (API version 7.23) [ 8.731173] systemd-udevd[258]: starting version 215 [ 8.957382] ACPI: acpi_idle registered with cpuidle [ 8.996628] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 8.997060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.998551] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 9.002238] acpi device:01: registered as cooling_device0 [ 9.002380] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 9.003662] ACPI: Lid Switch [LID] [ 9.003771] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 9.003777] ACPI: Sleep Button [SLPB] [ 9.003898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 9.003902] ACPI: Power Button [PWRF] [ 9.033694] ACPI: AC Adapter [AC] (on-line) [ 9.036632] [drm] Initialized drm 1.1.0 20060810 [ 9.040684] Non-volatile memory driver v1.3 [ 9.044256] tpm_tis 00:07: 1.2 TPM (device-id 0x3202, rev-id 5) [ 9.055484] ACPI: Battery Slot [BAT0] (battery absent) [ 9.062865] snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:2010 [ 9.074066] NET: Registered protocol family 23 [ 9.091877] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 9.091883] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 9.091885] thinkpad_acpi: ThinkPad BIOS 7JET23WW (1.08 ), EC 7JHT12WW-1.03 [ 9.091888] thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 636338U [ 9.091891] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 9.091893] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 9.099676] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 9.100518] thinkpad_acpi: ACPI backlight control delay disabled [ 9.100672] thinkpad_acpi: radio switch found; radios are enabled [ 9.100805] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 9.100835] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 9.100837] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 9.105368] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 9.105506] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 9.117167] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 9.125105] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1981: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker [ 9.125112] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.125117] snd_hda_codec_analog hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.125120] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 9.125123] snd_hda_codec_analog hdaudioC0D0: inputs: [ 9.125127] snd_hda_codec_analog hdaudioC0D0: Mic=0x8 [ 9.125131] snd_hda_codec_analog hdaudioC0D0: CD=0x19 [ 9.131560] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 9.151052] intel_rng: FWH not detected [ 10.033549] e1000e 0000:02:00.0 eth8: renamed from eth0 [ 10.039968] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:201c] [ 10.048298] systemd-udevd[290]: renamed network interface eth0 to eth8 [ 10.061199] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 10.061400] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB_.PCI0.LPC_.PMIO) (20150818/utaddress-254) [ 10.061410] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.061416] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 10.061423] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.061425] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 10.061432] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.061434] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.075030] [drm] Memory usable by graphics device = 256M [ 10.075047] [drm] Replacing VGA console driver [ 10.078613] Console: switching to colour dummy device 80x25 [ 10.080692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.080698] [drm] Driver supports precise vblank timestamp query. [ 10.080813] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.085874] leds_ss4200: no LED devices found [ 10.150685] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 10.150691] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 10.181170] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 10.181182] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 10.181190] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x9000-0xcfff] [ 10.181195] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff: [ 10.184228] excluding 0x9000-0x90ff [ 10.188843] [drm] initialized overlay support [ 10.188917] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0 [ 10.189321] 0x9400-0x94ff [ 10.221621] fbcon: inteldrmfb (fb0) is primary device [ 10.247233] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard [ 10.261071] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 10.261074] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 10.279795] iTCO_vendor_support: vendor-support=0 [ 10.283708] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 10.283774] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 10.283940] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.296037] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff] [ 10.296041] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff: [ 10.296044] excluding [ 10.296045] 0xe4300000-0xe46cffff [ 10.296057] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 10.296060] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff: [ 10.296067] excluding [ 10.296068] 0xe0000000-0xe3ffffff [ 10.304192] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 10.320165] tpm_tis 00:07: TPM is disabled/deactivated (0x6) [ 10.321242] nsc-ircc 00:05: [io 0x02f8-0x02ff] [ 10.321323] nsc-ircc 00:05: [irq 3] [ 10.321327] nsc-ircc 00:05: [dma 1] [ 10.321808] nsc-ircc 00:05: activated [ 10.321850] nsc-ircc, chip->init [ 10.321863] nsc-ircc, Found chip at base=0x164e [ 10.321903] nsc-ircc, driver loaded (Dag Brattli) [ 10.322211] IrDA: Registered device irda0 [ 10.322213] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 10.324706] iwl3945 0000:03:00.0 wlan4: renamed from wlan0 [ 10.344293] systemd-udevd[297]: renamed network interface wlan0 to wlan4 [ 10.398183] cfg80211: World regulatory domain updated: [ 10.398186] cfg80211: DFS Master region: unset [ 10.398187] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.398190] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398192] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398194] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398196] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.398199] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 10.398201] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.398203] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 10.398205] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 10.625567] psmouse serio1: hgpk: ID: 10 00 64 [ 10.776561] Console: switching [ 10.776565] to colour frame buffer device 128x48 [ 10.784739] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 10.908123] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard [ 10.979694] systemd-journald[246]: Received request to flush runtime journal from PID 1 [ 10.990479] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.008372] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 12.084824] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready [ 33.080358] iwl3945 0000:03:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode [ 33.080371] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 [ 33.153739] IPv6: ADDRCONF(NETDEV_UP): wlan4: link is not ready [ 35.297374] wlan4: authenticate with 34:31:c4:bd:c8:98 [ 35.300621] wlan4: direct probe to 34:31:c4:bd:c8:98 (try 1/3) [ 35.504102] wlan4: send auth to 34:31:c4:bd:c8:98 (try 2/3) [ 35.514420] wlan4: authenticated [ 35.516197] wlan4: associate with 34:31:c4:bd:c8:98 (try 1/3) [ 35.579702] wlan4: RX AssocResp from 34:31:c4:bd:c8:98 (capab=0x411 status=0 aid=1) [ 35.581394] wlan4: associated [ 35.581439] IPv6: ADDRCONF(NETDEV_CHANGE): wlan4: link becomes ready [ 35.588451] cfg80211: Regulatory domain changed to country: DE [ 35.588458] cfg80211: DFS Master region: ETSI [ 35.588461] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 35.588467] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 35.588472] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 35.588477] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 35.588481] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 35.588485] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 35.671605] wlan4: Limiting TX power to 20 (23 - 3) dBm as advertised by 34:31:c4:bd:c8:98
signature.asc
Description: This is a digitally signed message part