Booting jessie on the same C8000 is a beauty, works like a song:
Booting... <Cpu0> 000010f700e00000 0000000000000000 CC_BOOT_INIT_OTHR_PATH
Boot IO Dependent Code (IODC) revision 2
<Cpu0> 0000100200e00000 0000000000000000 CC_BOOT_LOAD_IPL_OTHR_PATH
<Cpu0> 160012cb00e00000 0000000000000000 CC_MPS_SLAVE_WAKEUP_ALL
<Cpu0> 160012cd00e00000 0000000000000001 CC_MPS_SLAVE_WAKEUP
<Cpu0> 080012ce00e00000 000000f0f0d07888 CC_MPS_SLAVE_WAKE_FUNC
<Cpu1> 160012d501e00000 010002000000003a CC_MPS_SLAVE_AWAKE
<Cpu0> 0000097c00e00000 00009000010000ff CC_BOOT_MONARCH_SLAVE_CHECK
<Cpu1> 080012d601e00000 000000f0f0d07888 CC_MPS_SLAVE_WAKE_ADDR
<Cpu0> 160012cf00e00000 000090000100000e CC_MPS_CPU_WAITING
<Cpu1> 0300096301e00000 0000000008000008 CC_BOOT_MEM_CPU_RENDEZVOUS
<Cpu1> 160012d301e00000 0100900000000000 CC_MPS_SLAVE_SLEEPING
<Cpu1> 080012d401e00000 000000f0f0d07e40 CC_MPS_SLAVE_SLEEP_ADDR
<Cpu0> 160012d000e00000 0000900001000000 CC_MPS_CPU_WAIT_OVER
HARD Booted.
<Cpu0> 0000109800e00000 0000000000000000 CC_BOOT_LAUNCH_IPL_OTHR
<Cpu0> 0100142900e00000 fffffff0f0e09d80 CC_CPU_INTRIGUE_LDB
<Cpu0> 3400082100e00000 0000000000000001 CC_BOOT_BOOT_COMPLETE
palo ipl 1.95 root@mkhppa3 Thu Apr 17 20:15:17 UTC 2014
Skipping extended partition 5 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 2 38 f0 Palo
2 39 276 83 ext2
3 277 47960 83 ext2
PALO(F0) partition contains:
0/vmlinux64 11930248(0) bytes @ 0x140000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=UUID=7389e709-a47d-4e36-b2c5-373e87dd6f89
HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF64 executable
Entry 00100000 first 00100000 n 2
Segment 0 load 00100000 size 228648 mediaptr 0x1000
Segment 1 load 00138000 size 9425024 mediaptr 0x39000
Loading ramdisk 16564768 bytes @ 3f022000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-parisc64-smp (
debian-ker...@lists.debian.org) (gcc version 4.8.4 (GCC) ) #1 SMP Debian
3.16.7-ckt4-3 (2015-02-03)
[ 0.000000] unwind_init: start = 0x40877d58, end = 0x408bdf28, entries =
17949
[ 0.000000] FP[0] enabled: Rev 1 Model 20
[ 0.000000] The 64-bit Kernel has started...
[ 0.000000] Default page size is 4KB.
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: 64 bit PAT.
[ 0.000000] model 000088b0 00000491 00000000 00000002 5680c2cb53677fcd
100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000302
[ 0.000000] CPUID vers 20 rev 5 (0x00000285)
[ 0.000000] capabilities 0x35
[ 0.000000] model 9000/785/C8000
[ 0.000000] parisc_cache_init: Only equivalent aliasing supported!
[ 0.000000] Memory Ranges:
[ 0.000000] 0) Start 0x0000000000000000 End 0x000000003fffffff Size
1024 MB
[ 0.000000] 1) Start 0x0000000100000000 End 0x00000002ffdfffff Size
8190 MB
[ 0.000000] 2) Start 0x0000004040000000 End 0x00000040ffffffff Size
3072 MB
[ 0.000000] Total Memory: 12286 MB
[ 0.000000] initrd: 7f022000-7ffee220
[ 0.000000] initrd: reserving 3f022000-3ffee220 (mem_max 2ffe00000)
[ 0.000000] PERCPU: Embedded 14 pages/cpu @0000000042fc0000 s27072 r8192
d22080 u57344
[ 0.000000] SMP: bootstrap CPU ID is 0
[ 0.000000] Built 3 zonelists in Zone order, mobility grouping on.
Total pages: 3102215
[ 0.000000] Kernel command line:
root=UUID=7389e709-a47d-4e36-b2c5-373e87dd6f89 HOME=/ console=ttyS0
TERM=vt102 palo_kernel=2/vmlinux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 12333216K/12580864K available (5512K kernel code,
1817K rwdata, 1091K rodata, 368K init, 636K bss, 247648K reserved)
[ 0.000000] virtual kernel memory layout:
0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007
MB)
0.000000] memory : 0x0000000040000000 - 0x0000004140000000
(266240 MB)
0.000000] .init : 0x0000000040100000 - 0x000000004015c000 ( 368
kB)
0.000000] .data : 0x00000000406be000 - 0x0000000040995470 (2909
kB)
0.000000] .text : 0x000000004015c000 - 0x00000000406be000 (5512
kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 160x64
[ 0.060000] Calibrating delay loop... 1988.60 BogoMIPS (lpj=3977216)
[ 0.156000] pid_max: default: 32768 minimum: 301
[ 0.216000] Security Framework initialized
[ 0.268000] AppArmor: AppArmor disabled by boot time parameter
[ 0.348000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.436000] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.524000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.624000] Initializing cgroup subsys memory
[ 0.680000] Initializing cgroup subsys devices
[ 0.740000] Initializing cgroup subsys freezer
[ 0.796000] Initializing cgroup subsys net_cls
[ 0.856000] Initializing cgroup subsys blkio
[ 0.912000] Initializing cgroup subsys perf_event
[ 0.976000] Initializing cgroup subsys net_prio
[ 1.036000] Brought up 1 CPUs
[ 1.076000] devtmpfs: initialized
[ 1.120000] NET: Registered protocol family 16
[ 1.180000] EISA bus registered
[ 1.220000] Searching for devices...
[ 1.372000] Found devices:
[ 1.408000] 1. Crestone Peak Fast? at 0xfffffffffe780000 [128] { 0, 0x0,
0x88b, 0x00004 }
[ 1.516000] 2. Crestone Peak Fast? at 0xfffffffffe781000 [129] { 0, 0x0,
0x88b, 0x00004 }
[ 1.624000] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x0b6, 0x00009
}
[ 1.716000] 4. Pluto BC McKinley Port at 0xfffffffffed00000 [0] { 12,
0x0, 0x880, 0x0000c }
[ 1.824000] 5. Mercury PCI Bridge at 0xfffffffffed20000 [0/0] { 13, 0x0,
0x783, 0x0000a }
[ 1.932000] 6. Mercury PCI Bridge at 0xfffffffffed24000 [0/2] { 13, 0x0,
0x783, 0x0000a }
[ 2.040000] 7. Mercury PCI Bridge at 0xfffffffffed26000 [0/3] { 13, 0x0,
0x783, 0x0000a }
[ 2.148000] 8. Quicksilver AGP Bridge at 0xfffffffffed28000 [0/4] { 13,
0x0, 0x784, 0x0000a }
[ 2.260000] 9. BMC IPMI Mgmt Ctlr at 0xfffffff0f05b0000 [16] { 15, 0x0,
0x004, 0x000c0 }
[ 2.368000] 10. Crestone Peak Fast? Core RS-232 at 0xfffffff0f05e0000
[17] { 10, 0x0, 0x077, 0x000ad }
[ 2.492000] 11. Crestone Peak Fast? Core RS-232 at 0xfffffff0f05e2000
[18] { 10, 0x0, 0x077, 0x000ad }
[ 2.612000] Enabling PDC_PAT chassis codes support v0.05
<Cpu0> 38000c6400e00000 a0e008101100c000
CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
<Cpu0> 36000c6a00e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
[ 3.516000] Releasing cpu 1 now, hpa=fffffffffe781000
<Cpu1> 0000099101e00000 0000000000000000 CC_BOOT_OS_RENDEZVOUS
<Cpu1> 0100142901e00000 fffffff0f0e09d80 CC_CPU_INTRIGUE_LDB
[ 3.952000] FP[1] enabled: Rev 1 Model 20
[ 3.956000] CPU(s): 2 out of 2 PA8800 (Mako) at 1000.000000 MHz online
[ 4.100000] Setting cache flush threshold to 2000000 (2 CPUs online)
[ 4.336000] SBA found Pluto 2.3 at 0xfffffffffed00000
[ 4.464000] sba_ioc_init_pluto: reserving 512Mb of IOVA space for agpgart
[ 4.568000] Mercury version TR3.2 (0x32) found at 0xfffffffffed20000
[ 4.676000] LBA: lmmio_space [0xffffffff80000000-0xffffffff9fffffff] -
new
[ 4.784000] LBA 0:0: PCI host bridge to bus 0000:00
[ 4.848000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 4.932000] pci_bus 0000:00: root bus resource [mem
0xffffffff80000000-0xffffffff9fffffff] (bus address [0x80000000-0x9fffffff])
[ 5.084000] pci_bus 0000:00: root bus resource [mem
0xffffff0000000000-0xffffff0fffffffff]
[ 5.192000] pci_bus 0000:00: root bus resource [bus 00-07]
[ 5.276000] Mercury version TR3.2 (0x32) found at 0xfffffffffed24000
[ 5.404000] LBA 0:2: PCI host bridge to bus 0000:40
[ 5.468000] pci_bus 0000:40: root bus resource [io 0x10000-0x1ffff]
(bus address [0x0000-0xffff])
[ 5.588000] pci_bus 0000:40: root bus resource [mem
0xffffffffa0000000-0xffffffffafffffff] (bus address [0xa0000000-0xafffffff])
[ 5.740000] pci_bus 0000:40: root bus resource [mem
0xffffff2000000000-0xffffff2fffffffff]
[ 5.848000] pci_bus 0000:40: root bus resource [bus 40-47]
[ 5.936000] Mercury version TR3.2 (0x32) found at 0xfffffffffed26000
[ 6.064000] LBA 0:3: PCI host bridge to bus 0000:60
[ 6.128000] pci_bus 0000:60: root bus resource [io 0x20000-0x2ffff]
(bus address [0x0000-0xffff])
[ 6.244000] pci_bus 0000:60: root bus resource [mem
0xffffffffb0000000-0xffffffffbfffffff] (bus address [0xb0000000-0xbfffffff])
[ 6.396000] pci_bus 0000:60: root bus resource [mem
0xffffff3000000000-0xffffff3fffffffff]
[ 6.508000] pci_bus 0000:60: root bus resource [bus 60-67]
[ 6.592000] Quicksilver version TR1.0 (0x10) found at 0xfffffffffed28000
[ 6.704000] LBA: lmmio_space [0xffffffffc0000000-0xffffffffdfffffff] -
new
[ 6.816000] LBA 0:4: PCI host bridge to bus 0000:80
[ 6.880000] pci_bus 0000:80: root bus resource [io 0x30000-0x3ffff]
(bus address [0x0000-0xffff])
[ 7.000000] pci_bus 0000:80: root bus resource [mem
0xffffffffc0000000-0xffffffffdfffffff] (bus address [0xc0000000-0xdfffffff])
[ 7.152000] pci_bus 0000:80: root bus resource [mem
0xffffff4000000000-0xffffff4fffffffff]
[ 7.260000] pci_bus 0000:80: root bus resource [bus 80-87]
[ 7.332000] iosapic: no IRTE for 0000:80:00.1 (IRQ not connected?)
<Cpu0> 0300108200e00000 0000000000000000 CC_PROCS_ENTRY_IN
<Cpu0> 0300030700e00000 0000000000000000 CC_SYSTEM_STATE_RUNNING_OK
[ 7.820000] powersw: Soft power switch at 0xfffffff0f042e278 enabled.
[ 7.920000] vgaarb: setting as boot device: PCI:0000:80:00.0
[ 7.920000] vgaarb: device added:
PCI:0000:80:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 8.100000] vgaarb: loaded
[ 8.136000] vgaarb: bridge control possible 0000:80:00.0
[ 8.212000] NET: Registered protocol family 2
[ 8.268000] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 8.368000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 8.460000] TCP: Hash tables configured (established 131072 bind 65536)
[ 8.548000] TCP: reno registered
[ 8.588000] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 8.668000] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 8.756000] NET: Registered protocol family 1
[ 8.964000] Unpacking initramfs...
[ 9.844000] Freeing initrd memory: 16176K (000000007f022000 -
000000007ffee000)
[ 9.940000] Chassis warnings not supported.
[ 9.996000] Performance monitoring counters enabled for Crestone Peak
Fast?
[ 10.088000] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 10.172000] audit: initializing netlink subsys (disabled)
[ 10.244000] audit: type=2000 audit(1563019673.244:1): initialized
[ 10.324000] zbud: loaded
[ 10.360000] VFS: Disk quotas dquot_6.5.2
[ 10.412000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 10.496000] msgmni has been set to 24119
[ 10.572000] alg: No test for stdrng (krng)
[ 10.628000] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 10.724000] io scheduler noop registered
[ 10.776000] io scheduler deadline registered
[ 10.832000] io scheduler cfq registered (default)
[ 10.900000] PDC Stable Storage facility v0.30
[ 11.000000] STI GSC/PCI core graphics driver Version 0.9b
[ 11.072000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 11.168000] console [ttyS0] disabled
[ 11.256000] 17: ttyS0 at MMIO 0xfffffff0f05e0800 (irq = 75, base_baud =
115200) is a 16550A
[ 11.364000] console [ttyS0] enabled
[ 11.364000] console [ttyS0] enabled
[ 11.452000] bootconsole [ttyB0] disabled
[ 11.452000] bootconsole [ttyB0] disabled
[ 11.604000] 18: ttyS1 at MMIO 0xfffffff0f05e2800 (irq = 76, base_baud =
115200) is a 16550A
[ 11.704000] Linux agpgart interface v0.103
[ 11.756000] quicksilver: IO PDIR shared with sba_iommu
[ 11.832000] (null): AGP aperture is 512M @ 0x60000000
[ 11.892000] [drm] Initialized drm 1.1.0 20060810
[ 11.948000] mousedev: PS/2 mouse device common for all mice
[ 12.024000] rtc-generic rtc-generic: rtc core: registered rtc-generic as
rtc0
[ 12.108000] ledtrig-cpu: registered to indicate activity on CPUs
[ 12.180000] TCP: cubic registered
[ 12.220000] NET: Registered protocol family 10
[ 12.276000] mip6: Mobile IPv6
[ 12.308000] NET: Registered protocol family 17
[ 12.364000] mpls_gso: MPLS GSO support
[ 12.408000] registered taskstats version 1
[ 12.464000] rtc-generic rtc-generic: setting system clock to 2019-07-13
12:07:55 UTC (1563019675)
[ 12.584000] Freeing unused kernel memory: 368K (0000000040100000 -
000000004015c000)
<Cpu1> 38000c6401e00000 a0e008101100c001
CC_PAT_ENCODED_FIELD_MAJOR_FWD_PROG
<Cpu1> 36000c6a01e00000 0000000000000420 CC_PAT_DATA_FIELD_MAJOR_FWD_PROG
Loading, please wait...
[ 13.388000] systemd-udevd[61]: starting version 215
[ 13.448000] random: systemd-udevd urandom read with 58 bits of entropy
available
[ 14.084000] SCSI subsystem initialized
[ 14.180000] usbcore: registered new interface driver usbfs
[ 14.180000] e1000: Intel(R) PRO/1000 Network Driver - version
7.3.21-k8-NAPI
[ 14.180000] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 14.608000] Fusion MPT base driver 3.04.20
[ 14.664000] Copyright (c) 1999-2008 LSI Corporation
[ 14.740000] usbcore: registered new interface driver hub
[ 14.868000] usbcore: registered new device driver usb
[ 15.452000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.572000] Fusion MPT SPI Host driver 3.04.20
[ 15.712000] mptbase: ioc0: Initiating bringup
[ 15.856000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.060000] ehci-pci: EHCI PCI platform driver
[ 16.152000] e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:60:b0:7f:c5:76
[ 16.236000] e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 16.316000] sil680: 133MHz clock.
[ 16.372000] scsi0 : pata_sil680
[ 16.408000] scsi1 : pata_sil680
[ 16.448000] ata1: PATA max UDMA/133 cmd 0x26158 ctl 0x26164 bmdma
0x26140 irq 71
[ 16.536000] ata2: PATA max UDMA/133 cmd 0x26150 ctl 0x26160 bmdma
0x26148 irq 71
[ 16.636000] ehci-pci 0000:60:01.2: EHCI Host Controller
[ 16.700000] ehci-pci 0000:60:01.2: new USB bus registered, assigned bus
number 1
[ 16.800000] ehci-pci 0000:60:01.2: irq 70, io mem 0xffffffffb00a1000
[ 16.888000] ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95
[ 16.956000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 17.036000] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 17.096000] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 17.196000] usb usb1: Product: EHCI Host Controller
[ 17.256000] usb usb1: Manufacturer: Linux 3.16.0-4-parisc64-smp ehci_hcd
[ 17.336000] usb usb1: SerialNumber: 0000:60:01.2
[ 17.392000] ata2.00: ATAPI: LITE-ON COMBO SOHC-4836K, SQK5, max UDMA/44
[ 17.392000] hub 1-0:1.0: USB hub found
[ 17.392000] hub 1-0:1.0: 5 ports detected
[ 17.680000] ohci-pci: OHCI PCI platform driver
[ 17.764000] ohci-pci 0000:60:01.0: OHCI PCI host controller
[ 17.764000] ata2.00: configured for UDMA/44
[ 17.888000] ohci-pci 0000:60:01.0: new USB bus registered, assigned bus
number 2
[ 17.984000] ohci-pci 0000:60:01.0: irq 68, io mem 0xffffffffb00a3000
[ 18.064000] scsi 1:0:0:0: CD-ROM LITE-ON COMBO SOHC-4836K
SQK5 PQ: 0 ANSI: 5
[ 18.116000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 18.116000] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 18.116000] usb usb2: Product: OHCI PCI host controller
[ 18.116000] usb usb2: Manufacturer: Linux 3.16.0-4-parisc64-smp ohci_hcd
[ 18.116000] usb usb2: SerialNumber: 0000:60:01.0
[ 18.528000] hub 2-0:1.0: USB hub found
[ 18.572000] hub 2-0:1.0: 3 ports detected
[ 18.640000] ohci-pci 0000:60:01.1: OHCI PCI host controller
[ 18.712000] ohci-pci 0000:60:01.1: new USB bus registered, assigned bus
number 3
[ 18.808000] ohci-pci 0000:60:01.1: irq 69, io mem 0xffffffffb00a2000
[ 18.944000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 19.024000] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 19.112000] usb usb3: Product: OHCI PCI host controller
[ 19.172000] usb usb3: Manufacturer: Linux 3.16.0-4-parisc64-smp ohci_hcd
[ 19.252000] usb usb3: SerialNumber: 0000:60:01.1
[ 19.308000] hub 3-0:1.0: USB hub found
[ 19.356000] hub 3-0:1.0: 2 ports detected
[ 19.384000] scsi2 : ioc0: LSI53C1030 B2, FwRev=01032341h, Ports=1,
MaxQ=255, IRQ=66
[ 19.680000] sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
[ 19.760000] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 19.888000] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 20.032000] mptbase: ioc1: Initiating bringup
[ 20.572000] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 21.132000] scsi3 : ioc1: LSI53C1030 B2, FwRev=01032341h, Ports=1,
MaxQ=255, IRQ=67
[ 21.224000] scsi 2:0:1:0: Direct-Access HP 73.4G ST373207LW
HPC1 PQ: 0 ANSI: 3
[ 21.324000] scsi target2:0:1: Beginning Domain Validation
[ 21.764000] random: nonblocking pool is initialized
[ 21.896000] scsi target2:0:1: Ending Domain Validation
[ 21.956000] scsi target2:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS
RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 23.080000] scsi 2:0:6:0: Direct-Access HP 73.4G ST373207LW
HPC1 PQ: 0 ANSI: 3
[ 23.176000] scsi target2:0:6: Beginning Domain Validation
[ 23.260000] scsi target2:0:6: Ending Domain Validation
[ 23.324000] scsi target2:0:6: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS
RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 25.444000] scsi 2:0:1:0: Attached scsi generic sg1 type 0
[ 25.512000] scsi 2:0:6:0: Attached scsi generic sg2 type 0
[ 26.300000] sd 2:0:6:0: [sdb] 143374738 512-byte logical blocks: (73.4
GB/68.3 GiB)
[ 26.400000] sd 2:0:1:0: [sda] 143374738 512-byte logical blocks: (73.4
GB/68.3 GiB)
[ 26.496000] sd 2:0:6:0: [sdb] Write Protect is off
[ 26.564000] sd 2:0:1:0: [sda] Write Protect is off
[ 26.620000] sd 2:0:6:0: [sdb] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 26.624000] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 26.860000] sdb: unknown partition table
[ 26.872000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 26.992000] sd 2:0:1:0: [sda] Attached SCSI disk
[ 27.052000] sd 2:0:6:0: [sdb] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
done.
Begin: Running /scripts/local-premount ... done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
System: clean, 50998/3055616 files, 8950717/12207104 blocks
done.
[ 28.632000] EXT4-fs (sda3): mounted filesystem with ordered data mode.
Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[ 29.440000] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 29.600000] systemd[1]: Detected architecture 'parisc64'.
Welcome to Debian GNU/Linux 8 (jessie)!
[ 29.960000] systemd[1]: Inserted module 'autofs4'
[ 30.028000] systemd[1]: Set hostname to <c8k-Linux>.
[ 30.824000] systemd[1]: Cannot add dependency job for unit
display-manager.service, ignoring: Unit display-manager.service failed to
load: No such file or directory.
[ 31.004000] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 31.096000] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 31.188000] systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
[ 31.336000] systemd[1]: Starting Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 31.492000] systemd[1]: Reached target Remote File Systems (Pre).
[ 31.564000] systemd[1]: Starting Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 31.712000] systemd[1]: Reached target Encrypted Volumes.
[ 31.776000] systemd[1]: Starting Arbitrary Executable File Formats File
System Automount Point.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount
Point.
[ 32.004000] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 32.116000] systemd[1]: Starting Dispatch Password Requests to Console
Directory Watch.
[ 32.212000] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 32.308000] systemd[1]: Starting Paths.
[ OK ] Reached target Paths.
[ 32.428000] systemd[1]: Reached target Paths.
[ 32.480000] systemd[1]: Expecting device
dev-disk-by\x2duuid-2e43e720\x2d56fe\x2d4619\x2d9089\x2d83ff096067c8.device...
Expecting device
dev-disk-by\x2duuid-2e43e720\x2d56f...067c8.device...
[ 32.724000] systemd[1]: Expecting device
dev-disk-by\x2duuid-7eef3e8b\x2d4a5e\x2d490f\x2d83c5\x2da211d7d9bfd2.device...
Expecting device
dev-disk-by\x2duuid-7eef3e8b\x2d4a5...9bfd2.device...
[ 32.968000] systemd[1]: Expecting device
dev-disk-by\x2duuid-d687ac63\x2d2866\x2d4839\x2d9136\x2d2ebad6c6410f.device...
Expecting device
dev-disk-by\x2duuid-d687ac63\x2d286...6410f.device...
[ 33.212000] systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
[ 33.360000] systemd[1]: Created slice Root Slice.
[ 33.416000] systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 33.572000] systemd[1]: Created slice User and Session Slice.
[ 33.640000] systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
[ 33.796000] systemd[1]: Listening on Delayed Shutdown Socket.
[ 33.864000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 34.044000] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 34.128000] systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 34.284000] systemd[1]: Listening on Journal Socket (/dev/log).
[ 34.352000] systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 34.484000] systemd[1]: Listening on Syslog Socket.
[ 34.540000] systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 34.684000] systemd[1]: Listening on udev Kernel Socket.
[ 34.748000] systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 34.896000] systemd[1]: Listening on udev Control Socket.
[ 34.960000] systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
[ 35.096000] systemd[1]: Listening on Journal Socket.
[ 35.156000] systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
[ 35.284000] systemd[1]: Created slice System Slice.
[ 35.340000] systemd[1]: Starting File System Check on Root Device...
Starting File System Check on Root Device...
[ 35.512000] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ OK ] Created slice system-systemd\x2dfsck.slice.
[ 35.676000] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 35.752000] systemd[1]: Starting system-getty.slice.
[[ 35.824000] systemd[1]: Created slice system-getty.slice.
OK ][ 35.892000] systemd[1]: Starting system-serial\x2dgetty.slice.
Created slice s[ 35.976000] systemd[1]: Created slice
system-serial\x2dgetty.slice.
ystem-getty.slic[ 36.080000] systemd[1]: Started Set Up Additional Binary
Formats.
e.
[ OK [ 36.160000] systemd[1]: Starting udev Coldplug all Devices...
] Created sl[ 36.248000] systemd[1]: Mounting POSIX Message Queue File
System...
ice system-seria[ 36.340000] systemd[1]: Mounting Debug File System...
l\x2dgetty.slice[ 36.420000] systemd[1]: Mounted Huge Pages File System.
.
Star[ 36.492000] systemd[1]: Starting Create list of required
static device nodes for the current kernel...
ting udev Coldplug all Devices...
Mounting POSIX Message Queue File System...
Mounting Debug File System...
Starting Create list of required stati[ 36.788000] systemd[1]:
Starting Load Kernel Modules...
c device nodes..[ 36.872000] systemd[1]: Starting Journal Service...
.rrent kernel...[ 36.956000] systemd[1]: Started Journal Service.
Starting Load Kernel Modules...
Starting Journal Service...
[ OK ] Started Journal Service.
[ OK ] Reached target Slices.
[ OK ] Mounted Debug File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Started Create list of required static device nodes ...current
kernel.
Starting Create Static Device Nodes in /dev...
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Load Kernel Modules.
[ 37.364000] systemd-fsck[147]: System: clean, 50998/3055616 files,
8950717/12207104 blocks
Starting Apply Kernel Variables...
[ OK ] Started File System Check on Root Device.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Apply Kernel Variables.
Starting udev Kernel Device Manager...
Starting Remount Root and Kernel[ 38.208000] systemd-udevd[169]:
starting version 215
File Systems...
[ OK ] Started udev Kernel Device Manager.
Starting Copy rules generated while the root was ro...
[ 38.492000] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Copy rules generated while the root was ro.
[ OK ] Found device /dev/ttyS0.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Started Load/Save Random Seed.
[ OK ] Found device ST373207LW Home.
Starting File System Check on
/dev/disk/by-uuid/d687...2ebad6c6410f...
[ OK ] Found device ST373207LW 2.
Starting F[ 39.884000] [drm] radeon kernel modesetting enabled.
ile System Check[ 39.972000] radeon 0000:80:00.0: enabling SERR and
PARITY (0107 -> 0147)
on /dev/disk/by[ 40.056000] [drm] initializing kernel modesetting (R420
0x1002:0x4A4D 0x1002:0x0002).
-uuid/7eef...a21[ 40.180000] [drm] register mmio base: 0xD0030000
1d7d9bfd2...
[ 40.240000] [drm] register mmio size: 65536
[ 40.356000] ATOM BIOS: FireGL
[ 40.392000] radeon 0000:80:00.0: putting AGP V3 device into 8x mode
[ 40.468000] radeon 0000:80:00.0: GTT: 512M 0x60000000 - 0x7FFFFFFF
[ 40.540000] [drm] Generation 2 PCI interface, using max accessible memory
[ 40.624000] radeon 0000:80:00.0: VRAM: 256M 0xFFFFFFFFC8000000 -
0xFFFFFFFFD7FFFFFF (256M used)
[ 40.728000] [drm] Detected VRAM RAM=256M, BAR=128M
[ 40.784000] [drm] RAM width 256bits DDR
[ 40.832000] [TTM] Zone kernel: Available graphics memory: 6174880 kiB
[ 40.908000] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 40.988000] [TTM] Initializing pool allocator
[ 41.040000] [drm] radeon: 256M of VRAM memory ready
[ 41.100000] [drm] radeon: 512M of GTT memory ready.
[ 41.156000] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 41.240000] radeon 0000:80:00.0: WB disabled
[ 41.292000] radeon 0000:80:00.0: fence driver on ring 0 use gpu addr
0x0000000060000000 and cpu addr 0x0000000011341000
[ 41.420000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 41.500000] [drm] Driver supports precise vblank timestamp query.
[ 41.572000] [drm] radeon: irq initialized.
[ 41.624000] [drm] Loading R400 Microcode
[ 41.672000] radeon 0000:80:00.0: firmware: failed to load
radeon/R420_cp.bin (-2)
[ 41.760000] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 41.832000] radeon 0000:80:00.0: failed initializing CP (-2).
[ 41.900000] radeon 0000:80:00.0: Disabling GPU acceleration
[ 41.968000] [drm] radeon: cp finalized
[ 42.024000] [drm] radeon: cp finalized
[ 42.068000] [TTM] Finalizing pool allocator
[ 42.120000] [TTM] Zone kernel: Used memory at exit: 0 kiB
[ 42.188000] [TTM] Zone dma32: Used memory at exit: 0 kiB
[ 42.252000] [drm] radeon: ttm finalized
[ 42.300000] [drm] Forcing AGP to PCI mode
[ 42.404000] ATOM BIOS: FireGL
[ 42.436000] [drm] Generation 2 PCI interface, using max accessible memory
[ 42.520000] radeon 0000:80:00.0: VRAM: 256M 0xFFFFFFFFC8000000 -
0xFFFFFFFFD7FFFFFF (256M used)
[ 42.624000] radeon 0000:80:00.0: GTT: 512M 0xFFFFFFFFA8000000 -
0xFFFFFFFFC7FFFFFF
[ 42.716000] [drm] Detected VRAM RAM=256M, BAR=128M
[ 42.716000] [drm] RAM width 256bits DDR
[ OK ][ 42.820000] [TTM] Zone kernel: Available graphics memory:
6174880 kiB
Created slice s[ 42.916000] [TTM] Zone dma32: Available graphics
memory: 2097152 kiB
ystem-ifup.slice[ 43.008000] [TTM] Initializing pool allocator
.
[ 43.128000] [drm] radeon: 256M of VRAM memory ready
[ 43.188000] systemd-fsck[211]: Home: clean, 7733/977280 file[
43.244000] [drm] radeon: 512M of GTT memory ready.
s, 2238428/39060[ 43.320000] [drm] GART: num cpu pages 131072, num gpu
pages 131072
48 blocks
[ OK ] Started File System Check on /dev/d[ 43.456000] [drm] PCI GART
of 512M enabled (table at 0x0000000042800000).
isk/by-uuid/d687[ 43.552000] [drm] radeon: 3 quad pipes, 1 z pipes
initialized.
a...6-2ebad6c641[ 43.640000] radeon 0000:80:00.0: WB enabled
0f.
Mo[ 43.708000] radeon 0000:80:00.0: fence driver on ring 0 use
gpu addr 0xffffffffa8000000 and cpu addr 0x000000033f1d7000
[ 43.852000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 43.444000] [ 43.948000] [drm] Driver supports precise vblank
timestamp query.
systemd-fsck[213[ 44.036000] radeon 0000:80:00.0: radeon: MSI limited to
32-bit
]: /dev/sda2: cl[ 44.124000] [drm] radeon: irq initialized.
ean, 17/60960 fi[ 44.192000] [drm] Loading R400 Microcode
[ 44.192000] EXT4-fs (sda5): mounted filesystem with ordered data mode.
Opts: (null)
les, 39498/24371[ 44.348000] radeon 0000:80:00.0: firmware: failed to
load radeon/R420_cp.bin (-2)
2 blocks
[ 44.452000] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 44.532000] radeon 0000:80:00.0: failed initializing CP (-2).
[ 44.532000] radeon 0000:80:00.0: Disabling GPU acceleration
[ 44.532000] [drm] radeon: cp finalized
[ OK [ 44.728000] [drm] Radeon Display Connectors
] Mounted /home.[ 44.796000] [drm] Connector 0:
[ 44.848000] [drm] DVI-I-1
[ 44.884000] [drm] HPD1
[ 44.912000] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 44.992000] [drm] Encoders:
[ 45.028000] [drm] CRT1: INTERNAL_DAC1
[ 45.076000] [drm] DFP1: INTERNAL_TMDS1
[ 45.124000] [drm] Connector 1:
[ 45.124000] [drm] DVI-I-2
[ 45.124000] [drm] HPD2
[ 45.124000] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 45.124000] [drm] Encoders:
[ 45.124000] [drm] CRT2: INTERNAL_DAC2
[ 45.124000] [drm] DFP2: INTERNAL_DVO1
[ 45.140000] radeon 0000:80:00.0: No connectors reported connected with
modes
[ 45.140000] [drm] Cannot find any crtc or sizes - going 1024x768
[ 45.252000] [drm] fb mappable at 0xFFFFFFFFC8040000
[ 45.252000] [drm] vram apper at 0xFFFFFFFFC8000000
[ 45.252000] [drm] size 3145728
[ 45.252000] [drm] fb depth is 24
[ 45.252000] [drm] pitch is 4096
[ OK ] Started File System Check on /dev/disk/by-uuid/[ 45.824000]
Console: switching to colour frame buffer device 128x48
7eef3...5-a211d7[ 46.000000] radeon 0000:80:00.0: fb0: radeondrmfb frame
buffer device
d9bfd2.
[ 46.092000] radeon 0000:80:00.0: registered panic notifier
[ 46.188000] [drm] Initialized radeon 2.39.0 20080528 for 0000:80:00.0 on
minor 0
[ OK ] Found device ST373207LW 6.
Activating swap
/dev/disk/by-uuid/2e43e720-56fe-4619...83ff096067c8...
Mounting /boot...
[ 46.616000] EXT4-fs (sda2): mounting ext2 file system using the ext4
subsystem
[ 46.616000] Adding 6949884k swap on /dev/sda6. Priority:-1 extents:1
across:6949884k FS
[ OK ][ 46.824000] EXT4-fs (sda2): mounted filesystem without journal.
Opts: (null)
Activated swap /dev/disk/by-uuid/2e43e720-56fe-4619-9089-83ff096067c8.
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Reached target Remote File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting LSB: Raise network interfaces....
[ OK ] Reached target Swap.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
[ 47.876000] systemd-journald[158]: Received request to flush runtime
journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 48.428000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.496000] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX
[ 48.584000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ OK ] Started LSB: Raise network interfaces..
Starting ifup for eth0...
[ OK ] Started ifup for eth0.
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: RPC portmapper replacement...
[ OK ] Started LSB: RPC portmapper replacement.
[ OK ] Reached target RPC Port Mapper.
Starting LSB: NFS support files common to client and server...
[ 51.144000] RPC: Registered named UNIX socket transport module.
[ 51.216000] RPC: Registered udp transport module.
[ 51.272000] RPC: Registered tcp transport module.
[ 51.328000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 51.520000] FS-Cache: Loaded
[ 51.740000] FS-Cache: Netfs 'nfs' registered for caching
[ 52.144000] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ OK ] Started LSB: NFS support files common to client and server.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
Starting Deferred execution scheduler...
[ OK ] Started Deferred execution scheduler.
Starting Regular background program processing daemon...
[ OK ] Started Regular background program processing daemon.
Starting OpenBSD Secure Shell server...
[ OK ] Started OpenBSD Secure Shell server.
Starting /etc/rc.local Compatibility...
Starting Login Service...
Starting LSB: exim Mail Transport Agent...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
Starting System Logging Service...
Starting Permit User Sessions...
[ OK ] Started /etc/rc.local Compatibility.
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Login Service.
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started LSB: exim Mail Transport Agent.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Debian GNU/Linux 8 c8k-Linux ttyS0
c8k-Linux login:
