On Tue, 27 Sep 2005, Eugeniy Meshcheryakov wrote:
27 вересня 2005 о 18:36 +0200 Tomasz Kłoczko написав(-ла):
Eugeniy this is incorrect way .. better will be use IUTF8 atribute
I know that it is incorrect, i sent this patch only as demonstration of
the problem.
from tty level
On Sep 28, Michael Nitsche [EMAIL PROTECTED] wrote:
I use UDEV 0.070-2 and it doesn't load the Firmware of the IPW2200 so I
Are you really really sure that you are using 0.070-2 and not 0.070-1?
Because 0.070-2 works for everybody else, unless you disabled
udev_run_hotplugd in
Package: qgo
Version: 1.0.2-3
Severity: serious
Tags: patch
When building 'qgo' in a clean 'unstable' chroot,
I get the following error:
debian/rules clean
perl -w admin/debianrules echodirs debian/debiandirs
dh_testdir
make: dh_testdir: Command not found
make: *** [clean] Error 127
Please
Package: lxr
Version: 0.3.1-2
Severity: minor
README.Debian.gz is very useful for setting up lxr, but is most specific
to linux. I wish to use lxr with a different code base. I have followed
the instructions and attempted to substitute my codebase for linux where
appropriate to no avail. In
Package: apcupsd
Version: 3.10.18-1
Severity: minor
apcaccess status reports wrong line voltage for my UPS. An endianness
issue perhaps? It says 'LINEV: 59210.4 Volts'. Note that
59210.4 / 256 = 231.291 which is probably what it should report.
[63705] [14:06] [EMAIL PROTECTED] ~ %
The problems with granting temporary device access to arbitrary users have
been discussed for years; there is simply no way to sanely revoke this
access at logout time. Consequently, I believe an empty
/etc/security/group.conf *is* the sensible default, and I think this bug
should be closed.
Package: dhelp
Severity: serious
Version: 0.5.21
As the subject says, if I rebuild dhelp using an up-to-date sid
system, then try to install the resulting package (even in a clean
pbuilder chroot), I get a segmentation fault:
Unpacking dhelp (from .../d/dhelp/dhelp_0.5.21_i386.deb) ...
Setting
Hello,
Sorry for contacting you directly.
I'm trying to port you patch (grep-2.5.1-egf-speedup.patch) to Debian.
This patch triggered an issue when an empty pattern is used with the -Fw
options.
(see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329876)
I tried the Fedora grep-2.5.1-48.2
Package: qemu
Version: 0.7.2-0.1
Tags: patch
Followup-For: Bug #321232
Hi,
QEMU 0.7.2 has been available for a while. I've rebased most of the
Debian package's patches against the new version; I'm attaching the
resulting .diff.gz. The only missing patch is 50_ppc_ldscript.patch;
the upstream
Hi Adam,
I've finally had a chance to look further into this bug.
The original libct1 checks /etc/freetds/locales.conf for date formats,
and if none is specified it resorts to its default.
The Debian libct1 uses locales to get the date format, then checks
/etc/freetds/locales.conf, then
Package: snort
Version: 2.3.2-3
Followup-For: Bug #311617
I believe that this bug (#311617: At install, wrong owner for /var/log/snort)
is due to the lack of coreutils package.
Indeed, the /etc/init.d/snort is using 'stat' which belong to coreutils.
However, I am seeing that snort (testing)
Ok, this is not a bug in the hppa toolchain, it's a bug in the screwy
hand-hacked configure script that stripclub uses:
c++ -o /dev/null tests/fltktest.cpp `fltk-config --ldflags --use-images`
I suppose the compiler *ought* to be creating the binary as a temp file and
copying it to the final
Package: kwin-baghira
Severity: normal
Hi,
yesterday I tried to install kwin-baghira with apt. Therefore I got the
following message:
The following packages have unmet dependencies:
kwin-baghira: Depends: kdelibs4 (= 4:3.3.2-5) but it is not installable
Depends: libqt3c102-mt
Package: swat
Severity: wishlist
Hi, I made an initscript to start swat over ssl using stunnel (based on
skeleton), it would be good to add it to the debian package, dont you think?
It uses stunnel and you must create a certified with something like:
mkdir /etc/stunnel
openssl req -new
Package: nullidentd
Version: 1.0-3
Severity: normal
I swapped nullidentd for slidentd just now, and nullidentd doesn't
remove it's inetd.conf entry upon removal.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Package: libsoup
Version: 2.2-8
When trying to create a new SoupSoapMessage the program segfaults upon
calling the
soup_soap_message_new(...) function, instead of returning NULL upon failure.
A small testing codesnippet:
#include libsoup/soup.h
#include libsoup/soup-soap-message.h
#include
Fixed in 4.0.12-3
Fixed?
I've installed login 4.0.12-3 and I've found the same bug:
/usr/share/man/es/man1/login.1.gz
and
/usr/share/man/es/man1/su.1.gz
are provided by both, login (4.0.12-3) and manpages-es-extra (0.8a-13).
That is, I've got a package conflict not yet resolved.
Hi.
Installing libflac6 sarge package scummwm runs perfectly, i didn't test
if changing dep to libflac7 in debian/control this lib works.
Regards,
--
Nacho Barrientos Arias (LRU: #273993)
[EMAIL PROTECTED] || [EMAIL PROTECTED]
GPG: 0xE103FC4D - http://criptonita.com/~nacho
Subject: apt-proxy: malformed URI requests with http_proxy (extra /:
http://fqdn:80//dir)
Package: apt-proxy
Version: 1.9.32
Severity: normal
*** Please type your report below this line ***
When using apt-proxy behind a proxy, the external requests are
malformed.
Example config:
Antti Pyykko wrote:
Package: apcupsd
Version: 3.10.18-1
Severity: minor
apcaccess status reports wrong line voltage for my UPS. An endianness
issue perhaps? It says 'LINEV: 59210.4 Volts'. Note that
59210.4 / 256 = 231.291 which is probably what it should report.
i have forwarded the
On Tue, Sep 27, 2005 at 08:58:01AM -0400, Albert Cahalan wrote:
Alignment seems to be the same between ppc and i386. (not that I would
know or care about bitfields)
alignment for 64bit integer types is not the same for i386 vs everything
else.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Package: dbus-1
Version: 0.23.4-1
Severity: important
Just noticed this on a server which is using LDAP primarily for
authentication and for whatever reason had 'shadowconfig off' set at the
time. The error I received upon trying to install an updated version
of dbus-1 (may have been
Package: php3
Version: 3:3.0.18-31
Severity: serious
Tags: patch
When building 'php3' in a clean 'unstable' chroot,
I get the following error:
Reading package lists...
Building dependency tree...
E: Package libsnmp5-dev has no installation candidate
E: Failed to satisfy Build-Depends dependency
Ok.
I now looked at examples, and the cvs package, which contains an epoch
number don't have the epoch number in it's name!
So, It's all my fault! ;)
I'll be fixing it today...
daniel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Hi,
Extracting source
Password: su: Authentication failure
Sorry.
pbuilder: Failed extracting the source
- Aborting with an error
- unmounting dev/pts filesystem
...
I guess I have to set a further sudo permission here but for what program?
It is 'sudo su' ? I would not really
Alexander Hofmann wrote:
Package: kwin-baghira
Severity: normal
Hi,
yesterday I tried to install kwin-baghira with apt. Therefore I got the
following message:
The following packages have unmet dependencies:
kwin-baghira: Depends: kdelibs4 (= 4:3.3.2-5) but it is not installable
Package: bincimap
Version: 1.2.12final-1
bincimap's postinst creates /etc/ssl/certs/imapd.pem, but there is no
prerm to remove it when the package is purged. This means some cruft is
left on the filesystem.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Package: myphpmoney
Version: 1.3RC3-13
I'm getting this error when i try to insert a new op:
MySQL Error :
1062(Duplicate entry '103787471276000' for key 1)
The problem appears when you have 1 thousand operation!
The application doesn't add a digit to the key, so the key is already in
the
Package: netbase
Version: 4.21
Severity: minor
Tags: patch
The RFC listed as specifiying the IPSec ESP protocol is 2406, not 2046.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.8-mppe
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Versions of
On Mon, Mar 07, 2005 at 23:09:06 +0100, Oleg Verych wrote:
I found that at least one usefull codepage isn't known by glibc. It is
KOI8-RU.
Apparently that's the Ukrainian Net Character Set,
http://www.terena.nl/library/multiling/koi8-ru/
an extension of KOI8-R.
It is not listed in the
Hi,
if this is unreproducible this can hardly be classified as a DoS
security issue, which would at least require some predictability
to start the attack. Please remove the security tag unless
you disagree.
Cheers,
Moritz
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Package: ifhp
Version: 3.5.20-4
Tags: patch upstream
I think 3.5.20-2 fix for Bug#308982 mistakenly left .html and .pdf
docs out of binary package, though they are present in upstream
source tarball verbatim.
This happened due to overlooked upstream filename and directory
structure change after
Package: locales
Version: 2.3.5-6
Severity: important
After running dpkg-reconfigure locales and choosing [EMAIL PROTECTED] as
default system environment locale, all locales remains set to POSIX :
jupiter:/home/florent# sudo dpkg-reconfigure locales
Generating locales (this might take a
Package: stardict
Severity: wishlist
Hello,
The 2.4.5 have been released, and would you like to pack it? If you don't have
time, I will NMU it, and fix some bugs as well.
Regards,
Cai Qian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
I'd like to report this behaviour, too. In my setup (Debian Unstable),
the Spell Checker window in the Evolution Preferences Dialogue does not
show other dictionaries either with the aspell-en package installed.
* If there are other dictionaries installed and one removes the
aspell-en package,
On Wed, 28 Sep 2005, Junichi Uekawa wrote:
I've tracked the problem down to the fact that
/etc/pam.d/su no longer exists with a clean install
since around yesterday.
Upgraded systems continue to work since /etc/pam.d/su
already exists.
Nice that you found an issue. On the other hand my
Package: xfig
Version: 1:3.2.5-alpha5-4
Severity: normal
Open the manage styles dialog
click on a family (any family)
double-click on a style (any style)
xfig crashes saying
tags 330291 +patch
reassign 330291 login
severity 330291 serious
thanks
Hi,
Extracting source
Password: su: Authentication failure
Sorry.
pbuilder: Failed extracting the source
- Aborting with an error
- unmounting dev/pts filesystem
...
I guess I have to set a further
Package: aptitude
Version: 0.2.15.9-6
Severity: normal
Updating one package with complex dependencies fails:
I tried to update from slang1a-utf8 (1.4.9dbs-8) to
libslang1-utf8 (1.4.9dbs-10).
The following dependencies exist:
slang1a-utf8 (1.4.9dbs-8)
Conflicts: slang1-utf8
libslang1-utf8
Package: libgphoto2-2
Version: 2.1.6-1
Tags: patch
Hi!
http://bugzilla.ubuntu.com/show_bug.cgi?id=12132 reports a problem
when trying to import files from slightly buggy cameras like the HP
photosmart 850. It seems to report duplicate file name entries.
The original reporter proposed a
Should libusb provide any file under /etc/hotplug/ somewhere? Maybe
instead of the file in /etc/hotplug.d/ ? What is the difference between
them?
Or what is the problem? Is it with hotplug or with libusb?
Tracking down the cause of this problem is not trivial to me. The man
page does not mention
On Mon, Sep 26, 2005 at 03:03:01AM +0200, Marc 'HE' Brockschmidt wrote:
[Added option to use something else than debuild to build
Florian Ragwitz [EMAIL PROTECTED]**20050913045447] {
It looks like I'm too stupid for this:
Florian contacted me later to say that there were some bugs with his
clone 330247 -1
reassign -1 manpages-ru
retitle -1 Please stop providing outdated manpages
thanks
Hi!
On Tue, Sep 27, 2005 at 06:13:58AM +0200, Christian Perrier wrote:
Quoting Jan Brüninghaus ([EMAIL PROTECTED]):
Package: login
Version: 1:4.0.3-39
Severity: grave
Tags: l10n
retitle 330291 missing /etc/pam.d/su from login package
thanks
Let us retitle this bugreport, so that is looks more correct.
amicablement,
junichi
--
Junichi Uekawa, Debian Developer http://www.netfort.gr.jp/~dancer/
183A 70FC 4732 1B87 57A5 CE82 D837 7D4E E81E 55C1
--
To
* Branden Robinson [Wed, 28 Sep 2005 04:13:48 -0500]:
For years I have performed multiple opens of mbox files, using multiple
mutt processes.
For years it worked.
Now it doesn't.
As mentioned on IRC:
(a) I can't reproduce this after a quick test, including the
procedure you
Package: openoffice.org-gnomevfs
Version: 1.1.4-7.0.1
I use OO without the option use OO dialogs. I can easily locate the
file on the network place via the gtk open dialog. I double click it:
Nothing happens. OO just stays there with the empty page like before.
Happens with native OO files as
Package: cdrecord
Version: 4:2.01+01a03-2
Severity: important
Hi.
Each time I upgrade the system (and cdrecord is updated), I get into
problems writing CDs. I use cdrecord through k3b; I've just tried
to blank a CD-RW and got the following error message (k3b log):
---BEGIN LOG---
System
Package: conquest-server
Version: 8.1.1-2
conquest-server seems to create two files in /var/games/conquest in the
postinst, but there is not prerm to remove them on purge, meaning that
the files and the directory remain as cruft. piuparts reports some other
problems as well, but I didn't look
Package: mozilla-browser
Version: 2:1.7.8-1
Severity: normal
Hello,
I'm having problems deactivating the popup blocker in mozilla. Even though
it is unchecked in the preferences dialog, it still keeps on blocking
popups.
This typically happens why a try to print a city map (not a route)
using
On Sep 28, Martin Samuelsson [EMAIL PROTECTED] wrote:
Or what is the problem? Is it with hotplug or with libusb?
With hotplug. If will be solved by the next udev upload, which will
replace hotplug and correctly support this.
--
ciao,
Marco
signature.asc
Description: Digital signature
On Tue, September 27, 2005 9:15 pm, Dan Jacobson said:
Package: cpufreqd
Severity: normal
[...]
do something like
cat cpuinfo_min_freq scaling_min_freq
cat cpuinfo_max_freq scaling_max_freq
upon installation. And cpufreqd should do the same upon removal.
actually a much better
Martin Pitt wrote:
Package: libgphoto2-2
Version: 2.1.6-1
Tags: patch
Hi!
http://bugzilla.ubuntu.com/show_bug.cgi?id=12132 reports a problem
when trying to import files from slightly buggy cameras like the HP
photosmart 850. It seems to report duplicate file name entries.
The
Package: mirrors
Severity: wishlist
Site: ww.taukita.com
Type: leaf
Archive-ftp: /[EMAIL PROTECTED]/
Archive-http: /online casino portal/
Archive-nfs: /[EMAIL PROTECTED]/
Archive-rsync: [EMAIL PROTECTED]/
CDImage-ftp: /[EMAIL PROTECTED]/
CDImage-http: //www.taukita.com/
CDImage-nfs: /[EMAIL
Package: tetex-bin
Version: 3.0-7
Severity: minor
Tags: experimental
Hello,
updmap-sys gives many warnings like:
updmap-sys: using map file `/usr/share/texmf/fonts/map/dvips/tetex/dvips35.map'
!!! WARNING: While searching for the right map file for `dvips35.map', we have
found the file
Package: cupsys-bsd
Version: 1.1.23-12
Severity: important
I am not very sure, if this is the actual package that has bug.
If normal luser tries to print with lpr-command, his/her print can be seen in
output of lpq-command only very shortly, but nothing happens. Printer
just stays in normal
Package: libxml++2.6-1c2
Version: 2.6.1-2.1
Severity: important
File: libxml++2.6
I can't even run the provided example program, examples/dom_parser/main.cc:
(gdb) set args /usr/share/doc/libxml++2.6-doc/examples/dom_parser/example.xml
(gdb) run
Starting program:
Package: ant-optional
Version: 1.6.5-2
Severity: wishlist
ant-optional should depend on the javacc package for the javacc task.
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.6.11-1-k7-smp
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
--
Hello.
On Sat, 2005-08-20 at 10:18, Vincent Bernat wrote:
Any news on this ITP ? HAL and DBUS are now in Debian.
I'm interesting in this to. Is there anybody out still working on
this?
regards
Stefan Schmidt
signature.asc
Description: Digital signature
tags 286978 +pending
thanks
Fixed in CVS for next upload.
Bdale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Wed, Sep 28, 2005 at 05:13:03AM +0800, Dan Jacobson wrote:
cpu-freq/user-guide.txt should mention Celeron! Otherwise Celeron
users will have little hope of figuring out what to put in /etc/modules.
After running http://www.plenz.com/linux/thinkpad_R50e thru a
translator, it is clear
On Wed, Sep 28, 2005 at 05:43:45AM +0800, Dan Jacobson wrote:
Package: linux-doc-2.6.12
Version: 2.6.12-2
Severity: wishlist
Tags: upstream
Gentlemen, Documentation/cpu-freq/user-guide.txt.gz,
and the relevant Documentation/*/*/*ACPI*/ document (that I cannot
find), should both emphasize
I am using Debian sid i686 with xorg server
libuim0 version 0.4.7-1
uim-m17nlib version 0.4.7-1
uim version 0.4.7-1
uim-common version 0.4.7-1
uim-utils version 0.4.7-1
uim-gtk2.0 version 0.4.7-1
uim-xim version 0.4.7-1
I have selected default input method m17n-zh-py for chinese piying input
On Wed, 28 Sep 2005 00:15:24 -0700, Ryan Murray [EMAIL PROTECTED] said:
On Wed, Sep 28, 2005 at 12:48:13AM -0500, Manoj Srivastava wrote:
Sounds to me that the package in question is getting ahead of
policy and deciding that the debconf transition is over. Well, is
it just powerpc debian
On Wed, 28 Sep 2005 06:24:51 +0200, Sven Luther [EMAIL PROTECTED] said:
reassign 330445 kernel-package thanks
On Tue, Sep 27, 2005 at 08:22:38PM -0700, Ryan Murray wrote:
Package:
linux-image-2.6.12-1-powerpc,linux-kernel-di-powerpc-2.6,kernel-package
Severity: serious
The problem:
*
ke, 2005-09-28 kello 14:33 +0200, Florent Bayle kirjoitti:
After running dpkg-reconfigure locales and choosing [EMAIL PROTECTED] as
default system environment locale, all locales remains set to POSIX :
jupiter:/home/florent# sudo dpkg-reconfigure locales
Generating locales (this might take
Package: postgresql
Severity: important
While trying to start PostgreSQL using the init.d scripts
(/etc/init.d/postgresql ..) it reports an error that shouldn't happen.
Reading logs (/var/log/postgresql/postgres.log) the following error
appears:
2005-09-28 09:11:12 [4192] LOG: could not create
Package: dhcpcd
Version: 1:2.0.0-1
dhcpcd's postinst creates /etc/dhcpc/resolv.conf, but when the package
is purged, that file (symlink) is left behind as cruft.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: freenet
Severity: wishlist
Hi,
what are your intentions about uploading a more recent version of
freenet (e.g. 5.2.1)?
Regards,
Daniel
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Email: [EMAIL PROTECTED]
Internet:
Package: ntop
Version: 2:3.2rc1-1
Severity: serious
When building 'ntop' in a clean 'unstable' chroot,
I get the following error:
Reading package lists...
Building dependency tree...
E: Package librrd0-dev has no installation candidate
E: Failed to satisfy Build-Depends dependency for ntop:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: hylafax
Severity: wishlist
Tags: patch l10n
Hi
Attached the updated Dutch translation for hylafax. Thanks for asking an
update!
Cheers
Luk
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.2 (GNU/Linux)
Package: dovecot-common
Version: 0.99.20050712-2
When dovecot-common is purged, it leaves the SSL certificates behind on
the system (see below for piuparts log snippet). I think they should be
removed, upon purge, like other configuration files.
0m8.3s ERROR: Package purging left files on
Il giorno dom, 25/09/2005 alle 23.04 +0300, Kornilios Kourtis ha
scritto:
Unfortunately I wasn't able to migrate from my older site (2.0.4-3) which
used zope2.6:
Could you please migrate to zope2.8 or zope2.7 (= 2.7.7, which is in
experimental)?
zope-cmfplone misses a versione dependency on
tags 330291 pending
thanks
Committed.
Thanks for noticying and for the patch.
Kind Regards,
--
Nekral
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: kernel-headers-2.6.8-2
Version: 2.6.8-16
Severity: important
When compiling external modules that use include/asm-i386/processor.h
there is the following error
include/asm/processor.h:87: error: array type has incomplete element type
The patch to solve this is the following:
Package: gcc-4.0
Version: 4.0.1-9
Severity: normal
Hi
while compiling with different parameters order you get different
results:
$ gcc -g -L/usr/X11R6/lib/ -lGL -lglut -lGLU -pthread -Wall configure.c -o
configure.bin
configure.c: In function ‘main’:
configure.c:11: warning: assignment
Package: fetchmail
Version: 6.2.5-18
The fetchmail postinst script contains the following:
adduser --system --ingroup nogroup --home /var/run/fetchmail \
--shell /bin/sh --disabled-password fetchmail /dev/null 21 ||
true
If the adduser command fails, this manages to hide the fact from
Package: gpr
Version: 0.9deb-6
Severity: important
What happens when I try to install ore remove:
brain:~# apt-get install gpr
Reading package lists... Done
Building dependency tree... Done
gpr is already the newest version.
The following extra packages will be installed:
libppd0 ppdfilt
The
Package: fireflier-server
Version: 1.1.5-1
The postinst script creates usrules.dat in /var/lib/fireflier, but there
is no prerm script to remove it when the package is removed or purged.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Package: wnpp
Severity: normal
I intend to orphan the squashfs package.
The package description is:
Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib
compression to compress both files, inodes and directories. Inodes in the
system are very small and all blocks are
Package: passwd
Version: 1:4.0.12-3
Severity: grave
Tags: l10n
Justification: renders package unusable
The package tries to overwrite /usr/share/man/de/man5/passwd.5.gz which
is also in the package manpages-de.
dpkg-output:
Unpacking replacement passwd ...
dpkg: error processing
Package: aolserver4
Version: 4.0.10-3
aolserver4's postrm script uses ucf when the package is purged.
Unfortunately, only essential packages may be relied on (see policy,
7.2), so you need to first check that ucf is installed before using it,
and if not, perhaps use plain rm instead (I'm not very
Package: durep
Version: 0.8.1-5
Hi,
while upgrading durep, an error in the postinst script is reported:
Preparing to replace durep 0.8.1-4 (using .../archives/durep_0.8.1-5_all.deb)
...
Unpacking replacement durep ...
Setting up durep (0.8.1-5) ...
/var/lib/dpkg/info/durep.postinst: line 8: [:
Package: mpg123
Followup-For: Bug #232312
[EMAIL PROTECTED] bug]$ apt-get source mpg123
Reading package lists... Done
Building dependency tree... Done
Need to get 201kB of source archives.
Get:1 http://ftp.kulnet.kuleuven.ac.be sid/non-free mpg123 0.59r-20 (dsc) [736B]
Get:2
Looking at the link you mention, ssl_certificates_file is where
certificates accepted by the user are saved, so pointing it at a file in
/etc isn't really a good idea.
Also, it isn't anything to do with CA certificates, which is what
/etc/ssl/certs/ca-certificates.crt should be (at least looking
Looking at the manual further, I see:
ssl_usesystemcerts
Type: boolean
Default: yes
If set to yes, mutt will use CA certificates in the system-wide
certificate store when checking if server certificate is signed by a
trusted CA.
Looks like this should Do The Right Thing(tm)
--
Russell
Hello,
The issue of how best to provide support for the freedesktop.org display
managers (kdm and gdm at the moment) has been discussed on debian-devel [1]
and in bug report #330064 [2]. Nothing approaching consensus was reached. I
outlined a number of issues that would have to be resolved
On Mon, 12 Sep 2005 11:48:16 -0700
[EMAIL PROTECTED] (Debian Bug Tracking System) wrote:
Please read the BTS before filing a bug. Bug already filed :
http://bugs.debian.org/321426
I think that looks like a different bug...
My bug is specific to X.org. I notice different behaviour running
Loic Dachary wrote:
Ed Boraas writes:
Hi, Loic.
I've been insanely busy lately, and I'm not sure how quickly I can get
to this. Would you be willing to prepare an NMU? If you would, I'd be
most grateful.
I uploaded a NMU based on cdbs.
Thank you.
-Ed
--
To UNSUBSCRIBE,
Hi,
thanks for your reply/time. I'm sending my configuration files. You can see
the error live on https://www.evangnet.cz/ (you can see the randomnes there).
My www1 server is running as a 1.2.10 virtual server (http://linux-vserver.org)
with grsecurity patch, so I can send you whole system
Daniel Schepler wrote:
Package: dhelp
Severity: serious
Version: 0.5.21
As the subject says, if I rebuild dhelp using an up-to-date sid
system, then try to install the resulting package (even in a clean
pbuilder chroot), I get a segmentation fault:
Unpacking dhelp (from
Le Mercredi 28 Septembre 2005 15:19, vous avez écrit :
[...]
Is any of the environment variables shown by locale above set when you
run it? Use the command env to see them.
[EMAIL PROTECTED]:~$ env
TERM=xterm
SHELL=/bin/bash
SSH_CLIENT=192.168.0.2 46415 22
SSH_TTY=/dev/pts/4
USER=florent
David Pashley wrote:
Package: ant-optional
Version: 1.6.5-2
Severity: wishlist
ant-optional should depend on the javacc package for the javacc task.
Confirmed that javacc is missing. However as for the other optional
tasks we will only suggest javacc from ant-optional.
Thanks for the
Roman Bertle wrote:
I thinks they are due to the new location of .map files in tetex3. If
the old files cannot removed automatically during the upgrade to
tetex3, there should be some comment in README.Debian about these
warnings, and whether files can be removed manually.
This sounds a lot
Martin Pitt [EMAIL PROTECTED] wrote:
Hi!
This has been assigned CAN-2005-3011, please mention this number in
the changelog when you fix this to allow easy tracking.
The current version, 4.8, is as well vulnerable:
[EMAIL PROTECTED]:~$ diff -u
Hi Frank!
Frank Küster [2005-09-28 16:11 +0200]:
The current version, 4.8, is as well vulnerable:
[EMAIL PROTECTED]:~$ diff -u
src/packages_for_sponsoring/texinfo-4.{7,8}/util/texindex.c
--- src/packages_for_sponsoring/texinfo-4.7/util/texindex.c 2004-03-18
23:26:53.0 +0100
Package: util-vserver
Version: 0.30.208-2
Severity: normal
While upgrading to the latest tools, I got the following message:
Setting up util-vserver (0.30.208-2) ...
lsattr: Inappropriate ioctl for device While reading flags on
/var/lib/vservers/
What does that mean?
Best regards,
Gilles
CLIENT ID - 7599
Contact Attempt #: 2
After finalizing your mort-refinance application we
are sorry to inform you that we cannot finance you for
the 3.68% rate we quoted. We however can try
to finance your home at a rate of 4.10%.
We apologize for this inconvenience.
Reassessment
Package: unison
Version: 2.13.16-2
Severity: minor
If the directory to synchronize contains any named sockets, a warning is
printed. The warning is harmless and skips over, it doesn't affect
operation, but it is annoying.
E.g.:
error.Devhelp.pevans
path
CLIENT ID - 7595
Contact Attempt #: 2
After finalizing your mort-refinance application we
are sorry to inform you that we cannot finance you for
the 3.67% rate we quoted. We however can try
to finance your home at a rate of 4.14%.
We apologize for this inconvenience.
Reassessment
Package: gnucash
Version: 1.8.9-4
Followup-For: Bug #321542
When trying to install gnucash on ppc (unstable), I still get:
obroa-skai:~# apt-get install gnucash
Reading Package Lists... Done
Building Dependency Tree... Done
Some packages could not be installed. This may mean that you have
101 - 200 of 514 matches
Mail list logo