- Original Message -
On Thu, Jun 07, 2012 at 11:00:33PM +0200, Andrea Arcangeli wrote:
In the x86 32bit PAE CONFIG_TRANSPARENT_HUGEPAGE=y case while
holding
the mmap_sem for reading, cmpxchg8b cannot be used to read pmd
contents under Xen.
So instead of dealing only with
Guillem Jover writes (Re: [xml/sgml-pkgs] Bug#676686: libxslt1.1: libxslt1.1
binNMUbroke multi-arch installability):
As I mentioned in the long ref-counting thread, I strongly disagree this
is a correct solution, it just seems like a hack to me. Instead I
think we should consider changelog
On Monday 11 June 2012 10:51:34 Gerfried Fuchs wrote:
tags 676538 - patch
thanks
* George Danchev danc...@spnet.net [2012-06-09 12:31:08 CEST]:
dropping libwxgtk2.8-dbg from build-depends and also dropping the
configure option --enable-debug is enough to get pgadmin3 stripped and
not
Hi,
On Mon, Jun 11, 2012 at 02:38:30AM -0400, Andres Cimmarusti wrote:
Package: xfce4-volumed
Version: 0.1.13-3
Severity: normal
I need to use pulseaudio and pavucontrol to be able to easily toggle
between HDMI audio output to a TV and laptop speakers. I also want to
use xfce volumed
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package zipper.app.
This upload would fix #454456 (wnpp bug).
http://mentors.debian.net/debian/pool/main/z/zipper.app/zipper.app_1.4-1.dsc
Changes since the last upload:
zipper.app (1.4-1) unstable;
CFLAGS = -Wall -ggdb
CXXFLAGS = -Wall -ggdb
Actually bypassing their sed by using the default level -g2 would be more
appropriate as a match for -g.
--
pub 4096R/0E4BD0AB people.fccf.net/danchev/key pgp.mit.edu
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a
Package: root-system-rootd
Version: 5.34.00~rc1-1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned
directories on the system after purge, which is a violation of
policy 6.8:
Package: mono-zeroconf
Version: 0.9.0-4
Followup-For: Bug #557694
Hello!
Additionally the package libmono-zeroconf-cil-dev misses a
period. I added a patch to fix these two typos.
Regards
Erik
--- control 2012-01-22 14:25:44.0 +0100
+++ control.new 2012-06-11 12:53:17.768654421 +0200
@@
This:
define(ACROREAD, [repeat swallow(acroread) fill needs_xembed :
acroread -openInNewWindow /a $fragment $file])
works for me in mozpluggerrc. There's no doubt that the default
config without needs_xembed is broken.
If it didn't work for the OP, perhaps he needed to killall chromium
and
* George Danchev danc...@spnet.net [2012-06-11 12:37:59 CEST]:
On Monday 11 June 2012 10:51:34 Gerfried Fuchs wrote:
* George Danchev danc...@spnet.net [2012-06-09 12:31:08 CEST]:
dropping libwxgtk2.8-dbg from build-depends and also dropping the
configure option --enable-debug is enough
Package: nut-client
Version: 2.6.4-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package failed the piuparts
upgrade test because dpkg detected a conffile as being modified and then
prompted the user for an action. As there
Package: src:procps
Version: 3.3.3-1
Severity: serious
Tags: sid wheezy patch
User: debian-...@lists.debian.org
Usertags: kfreebsd
X-Debbugs-Cc: debian-...@lists.debian.org
Justification: fails to build from source (but built successfully in the
past)
Hi,
Please see the attached patch, fixing
Package: postfix
Version: N/A
Severity: wishlist
Tags: l10n patch
Please find attached the Turkish translation of the postfix package.
Thanks,
Atila KOÇ
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the
forcemerge 663931 650711
thanks
On Mon, Jun 11, 2012 at 11:30:48AM +0200, Harald Dunkel wrote:
Hi Guido,
On 06/08/12 16:00, Guido Günther wrote:
Could that be the same as 663931? I've attached a possible workaround.
Cheers,
-- Guido
I haven't tried your patch (yet), but
Hi Bastien,
On Mon, Jun 11, 2012 at 6:30 AM, Bastien ROUCARIES
roucaries.bast...@gmail.com wrote:
Gnulib provide a passfd api tested on all unix, could you try to use it?
Honestly, it's the first time I hear about it.. It seems nice and I
like your code, but being something that is not a common
On Jun 11, 2012 12:21 Ansgar Burchardt ans...@debian.org wrote:
Hi,
On 06/11/2012 11:26 AM, Niels Thykier wrote:
Archive support
---
The FTP masters have requested that all signatures are stored in a
single ar member of the deb. That member should then contain a
flat
Hi, sorry for late reply.
It seems you dropped rsync access, is it definitive ?
yes, it is
Could you please update the mirror with higher frequency ?
Today, the debian packages are updated every 6 hours.
changed to every 6 hours
Could you please update your ftpsync version according to
Hi,
Eugen Dedu wrote:
Very often (each 2-10 times) kernel freezes with an error message upon
resuming from suspend to ram. Here is the message:
kobject_add_internal failed for BATO with -EEXIST, don't try to
register things with the same name in the same directory
Please attach a log or
Package: mysql-client-5.1
Version: 5.1.62-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package is no longer
installable:
Package: mysql-client-5.1
Source: mysql-5.1
Version: 5.1.62-1
Depends: ..., mysql-common (=
Package: marble
Version: 4:4.7.4-2
Severity: wishlist
Hello!
Marble lets you choose between the routing software MoNav, Routino and Gosmore
(plus two online routing services). Suggesting these packages (monav-client or
monav-routing-daemon, routino and gosmore) seems useful to me.
Thanks for
Package: avr-libc
Version: 1:1.8.0-2
Severity: normal
/usr/lib/share/man/man3
??? not exactly policy compliant, I'd say. Or easily discoverable.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (700, 'testing'), (650, 'unstable'), (600, 'stable'), (550,
On lun., 2012-06-11 at 02:38 -0400, Andres Cimmarusti wrote:
Package: xfce4-volumed
Version: 0.1.13-3
Severity: normal
I need to use pulseaudio and pavucontrol to be able to easily toggle
between HDMI audio output to a TV and laptop speakers. I also want to
use xfce volumed and mixer to
On lun., 2012-06-11 at 10:44 +0200, Thomas Martitz wrote:
FWIW, I could solve the problem on my system by upgrading libglib.
From and to which versions?
Other people, can you confirm that?
--
Yves-Alexis
signature.asc
Description: This is a digitally signed message part
Package: torrentflux
Version: 2.4-5.1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package failed to purge due
to a command not found. According to policy 7.2 you cannot rely on the
depends being available during purge,
On Mon, Jun 11, 2012 at 13:40:54 +0200, Andreas Beckmann wrote:
Package: mysql-client-5.1
Version: 5.1.62-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package is no longer
installable:
Not a bug, and expected.
Package: webissues-server
Version: 0.8.5-3
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package failed to purge due
to a command not found. According to policy 7.2 you cannot rely on the
depends being available during
Package: xlockmore
Version: 1:5.31-1.1
Dear maintainer,
I can't get working xlock modes:
$ xlock -lockdelay 10 -mode tube # or another mode (that is not blank mode)
unrecognized mode tube, using backup mode random
When I install xlockmore-gl it works fine
If it is something deliberated,
On Tue, Jun 5, 2012 at 4:51 PM, Alessio Treglia ales...@debian.org wrote:
If you agree, I'd go on uploading a new dummy transitional lv2core [1] to
ensure a smooth transition [2].
Any news?
--
Alessio Treglia | www.alessiotreglia.com
Debian Developer | ales...@debian.org
Added a patch upstream to enable IPv6 by default on Linux:
Sourceforge patch entry:
https://sourceforge.net/tracker/?func=detailaid=3534307group_id=132964atid=725711
Related entry in the forum:
http://pocoproject.org/forum/viewtopic.php?f=10t=5356p=8952hilit=IPv6#p8952
Thanks!
Francis
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package cairosvg
* Package name: cairosvg
Version : 0.4.3-1
Upstream Author : Kozea guillaume.ay...@kozea.fr
* URL :
Package: xpdf
Version: 3.03-9+b1
Severity: wishlist
In the xpdf man page:
-z zoom
Set the initial zoom factor. A number specifies a zoom
percentage, where 100 means 72 dpi. You may also specify
´page', to fit the page to the window size, or ´width',
to
Package: icinga-idoutils
Version: 1.7.0-4
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package failed to purge due
to a command not found. According to policy 7.2 you cannot rely on the
depends being available during
Package: ndoutils-common
Version: 1.4b9-1.1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package failed to purge due
to a command not found. According to policy 7.2 you cannot rely on the
depends being available during
Am 11.06.2012 13:46, schrieb Yves-Alexis Perez:
On lun., 2012-06-11 at 10:44 +0200, Thomas Martitz wrote:
FWIW, I could solve the problem on my system by upgrading libglib.
From and to which versions?
Other people, can you confirm that?
It was from 2.30.something (can't remember the
On Mon, 11 Jun 2012 11:26:19 +0200 (CEST)
ni...@thykier.net (Niels Thykier) wrote:
* Role (required, simple). Defines the signers relation to the
package. It must be one of the following values:
- builder: The signer built the package. At most one
signature file can use this
Package: virtualbox
Version: 4.1.16-dfsg-1
Severity: normal
Dear Maintainer,
I'm using VirtualBox to run a database server on a separate system on
my laptop; thus, I set that system to use vboxnet so my host can
communicate with the guest.
Lately (not sure how long, but consistently), whenever
On Sat 09 Jun 2012, ubuntu6226 wrote:
I would like to mention that rsync must be as good as `cp` to copy files. We
deal here with data, could be important data sometimes.
I know, I use daily to backup 5TB of data, without any problems.
OK, how to reproduce this bug of rsync.
fsck.vfat
Package: libconfig-model-perl
Version: 2.019-1
Severity: normal
File: /usr/bin/cme
Dear Maintainer,
I would like to use cme to upgrade some packages but failed to execute
the documented example in the man page:
#+begin_src
# modify configuration with command line
cme modify dpkg source
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package ledgersmb
* Package name: ledgersmb
Version : 1.3.18-1
Upstream Author : The LedgerSMB Core Team
* URL : www.ledgersmb.org
* License : GPL-2+
Section
On 2012-02-08 12:24:47 +0800, jida...@jidanni.org wrote:
I have more information for
Version: 3.02-21
$ xpdf file.pdf # + key does not work
$ xpdf -z 200 file.pdf # -z 200 ignored, but + key works
$ xpdf.real -z 200 file.pdf # -z 200 works! + key also works!
I have no such problems with
Hi Guido,
as requested a few additional infos for the records.
virt-name.log and virt-name.xml are attached.
# virsh migrate --live --unsafe virt-name qemu+ssh://server-name/system
Works with the old version.
[PATCH] Only check for cluster fs if we're using a filesystem
This works too for
Package: pacemaker
Version: 1.1.7-1~bpo60+1
Severity: important
Hi there,
I've just upgraded my pacemaker setup to the packages as provided by backports,
and I'm getting some very strange behaviour. The syslog messages from the
daemons now look as follows:
Jun 11 14:11:12 lbnfs1 crmd: [8481]:
Sorry,
last mail was a little bit too fast. The PATCH for libvirt works
only, if Cache Mode is manually set to none. If default, it
fails with
error: Unsafe migration: Migration may lead to data corruption if
disks use cache != none
Cheers
Bastian
Originalnachricht
Package: grub-pc
Version: 1.99-21
Severity: critical
Tags: d-i
Justification: breaks the whole system
Dear Maintainer,
I'm not sure if this breaks the system. I suspect it does, but i'm not willing
to restart my system if there is a change it won't boot afterwards.
* What led up to the
Axel Beckert, le Fri 08 Jun 2012 12:31:26 +0200, a écrit :
The second reason for not uploading to unstable yet has been resolved
last week, but it may affect usability on Hurd, too, again:
4.1.0 failed on kfreebsd again (http://bugs.debian.org/660567) and
thanks to Jan Christoph Nordholz I
On Monday, June 11, 2012 03:34:48 PM Felix Geyer wrote:
Version: 4.1.16-dfsg-2
This is fixed in version 4.1.16-dfsg-2 that I've just uploaded.
... that was fast ...
Thanks,
Shai.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe.
Hello,
I contacted you to assist in distributing the money left behind by my late
client,
Regards,
Mr Edward Cheah.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
unarchive 659747
reopen 659747 debian-...@lists.debian.org
retitle 659747 gem: FTBFS(kfreebsd): missing headers
notfixed 659747 gem/1:0.93.3-3
found 659747 gem/1:0.93.3-3
tags 659747 + patch
user debian-...@lists.debian.org
usertags 659747 ftbfs-gcc-4.7
thanks
Hi IOhannes,
A small extra hunk is
When trying to start abcde e.g. via $abcde /dev/sr0 its returning
with an error:
[ERROR] abcde: syntax error while processing track numbers (/dev/sr0)
Did you actually type abcde /dev/sr0 ? If so the error message is correct.
The correct command is abcde -d /dev/sr0
regards,
Colin
--
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Package: cmigemo
Version: 20110227-3
Severity: wishlist
Dear Maintainer,
As current migemo maintainer, I'm considering to drop migemo
package (mainly for 1.9 incompatibility and dead upstream).
Fortunately your cmigemo package seems have enough
Package: dietlibc-dev
Version: 0.32-5.1
Severity: normal
signal.h defines _NSIG to be 64
/usr/include/diet/signal.h:#define _NSIG64
however, _NSIG should be the highest signal number + 1, which would be 65.
-- System Information:
Debian Release: 6.0.3
APT prefers stable
Hello
I've looked at this issue on gabrielli.
The faulty tests times actions done by a forked child process.
The child process does:
say A;
flush;
say B ;
sleep 5;
flush;
The test verifies that A and B are read with several seconds interval even
though there's no delay between say A and
On Wed, May 16, 2012 at 10:36:43PM +0200, Miklos Szeredi wrote:
Hi,
Please find the strace attached.
Thanks.
Still I have no clues, the EEXIST error is not seen in any of the system
calls and I can't see fopen returning EEXIST for any reason.
Can you try ltrace as well? Though
Hello,
Same idea, but I leave here the default file untouched, and find the
IPv4/IPv6 addresses from the tayga config(ipv4-addr/ipv6-addr), as for
the other parameters(prefix, dynamic-pool...).
patch attached and pasted below for completness.
Thanks for your work.
sam
--- debian/init
On Monday 11 June 2012 14:35:46 Daniel Dehennin wrote:
I tried to use format=3.0 (quilt) instead of quilt (3.0) as
suggested[1] but it failed:
Oops, I need to fix the example.
#+begin_src
cme modify dpkg source format=3.0 (quilt)
enum type does not know '3.0'. Expected '1.0' or '2.0' or
Package: systemd
Version: 44-2
Severity: minor
Dear Maintainer,
I think this is just a cosmetic bug. I'm not sure from reading LSB
whether + is allowed in LSB headers or not. If it's not, feel free to
reassign to the package tacacs_plus.
After installing tacacs_plus the following message
Package: git-annex
Version: 3.20120522
Severity: critical
Justification: causes serious data loss
Dear Maintainer,
When git annex is run from inside a sub-directory of the repository
only the files in this directory get resored to real files.
All other files are still symlinks to a now missing
On Monday 11 June 2012 13:17:35 Gerfried Fuchs wrote:
--cut--
A possibly annoying detail for the debug package (pgadmin3-dbg)would be
that a single build is used for both debug and non-debug variants and
build with -O2 (-ggdb -O2) which may lead to unexpected results for the
debugging
Package: wine-bin
Version: 1.4-6
Severity: minor
When installing wine, I got:
Setting up wine-bin (1.4-6) ...
update-binfmts: warning: /usr/share/binfmts/wine: no executable
/usr/bin/wine-auto found, but continuing anyway as you request
update-alternatives: using /usr/bin/wine32 to provide
Didn't yet read the whole ubuntu bug, but xfce4-volumed uses gstreamer,
it doesn't “speak directly to the sound card”. Can't you just switch to
gstreamer-pulseaudio?
I have it installed and I used these two commands to make it use
pulseaudio by default:
$ gconftool-2 -t string --set
On Mon, Jun 11, 2012 at 12:05:05PM +0200, Reinhard Tartler wrote:
In order to check if that bug has already been fixed upstream, could
you please install the libavcodec-extra-53 package from backports.org
and check if the segmentation fault still occurs?
I've just tried libav-tools
Hi,
after changing
add_problematic package $package left obsolete init.d script behind
in /var/lib/dpkg/info/sysv-rc.postinst to
add_problematic package $package left obsolete init.d script $initscript
behind
I get
...
info: Checking if it is safe to convert to dependency based boot.
Hi,
this is indeed fixed now.
Testcase:
git init repo
cd repo
git commit -m one --allow-empty
touch a
git add a
git commit -m two
git filter-branch -f --env-filter 'export GIT_AUTHOR_DATE=$(TZ=UTC date -d@0
-R)'
git rebase -f HEAD~1
git show | grep Date
Date: Thu Jan 1 00:00:00 1970 +
Package: lintian
Version: 2.5.8
Severity: wishlist
Please add check for a case, where all the binaries[1] installed in
/usr/s?bin
are of type shell (sh, bash, perl, python); that is, their first line start
with a shebang:
#!
Then check that debian/control reads[2]
Architecture:
On lun., 2012-06-11 at 09:07 -0400, Andres Cimmarusti wrote:
Didn't yet read the whole ubuntu bug, but xfce4-volumed uses gstreamer,
it doesn't “speak directly to the sound card”. Can't you just switch to
gstreamer-pulseaudio?
I have it installed and I used these two commands to make it
On 11/06/12 13:31, Jonathan Nieder wrote:
Hi,
Eugen Dedu wrote:
Very often (each 2-10 times) kernel freezes with an error message upon
resuming from suspend to ram. Here is the message:
kobject_add_internal failed for BATO with -EEXIST, don't try to
register things with the same name in the
Dear Timo,
Am Montag, den 11.06.2012, 16:11 +0300 schrieb Timo Juhani Lindfors:
after changing
add_problematic package $package left obsolete init.d script behind
in /var/lib/dpkg/info/sysv-rc.postinst to
add_problematic package $package left obsolete init.d script $initscript
tags 675837 + patch
user debian-...@lists.debian.org
usertags 675837 ftbfs-gcc-4.7
thanks
Hi iustin,
My attached patch should fix this. Tested with a successful build on
kfreebsd-i386.
Like in some of the other source files, I'm assuming that all platforms
in the 'other' category will have
Hi David,
On Wed, Jun 06, 2012 at 12:17:15PM +0200, David Weber wrote:
Package: libvirt0
Version: 0.9.12-1.1
Severity: wishlist
File: libvirt
Hi,
please apply the attached patch to enable sanlock in libvirt
Thanks for the patch some quick questions:
+ libsanlock-dev,
+
Sandro Tosi wrote:
Bart Martens wrote:
Package: sponsorship-requests
Owner: Bob Proulx b...@proulx.com
I'm opening this RFS on behalf of Bob Proulx who owns ITA 652670.
Bob Proulx wrote:
Hi Bart,
How is progress on this ITA ?
Can I admit that it is a little frustrating? I
Package: otp
Version: 970425-7
Severity: wishlist
Please package new upstream version of otp available from
http://www.fourmilab.ch/
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: glance-common
Version: 2012.1-3
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package fails to upgrade from
'testing'.
It installed fine in 'testing', then the upgrade to 'sid' fails.
See policy 7.6 at
Hi,
Michal Suchanek wrote (05 Aug 2011 12:08:37 GMT) :
At the very least the libc nss modules are required in intramfs to
get dns lookup for netbooting. Splashscreen solutions like plymouth
might need some of the graphics rendering modules.
I think it would be useful to mark as blocked by
On Mon, 11 Jun 2012 18:10:29 +0900
Michael Meskes mes...@debian.org wrote:
tag 676802 upstream
thanks
Upon upgrading to citadel 8.11-2, however all outbound email fails
with “Connection broken during SMTP conversation”
No changes in configuration were made.
But the smtp code was
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package mpdcon.app.
http://mentors.debian.net/debian/pool/main/m/mpdcon.app/mpdcon.app_1.2-1.dsc
Changes since the last upload:
mpdcon.app (1.2-1) unstable; urgency=low
* New upstream release.
Package: brasero
Version: 3.2.0-4
Severity: normal
Dear Debian folks,
starting GNOME the file `.xsession-errors` contains the following error.
Tracker-WARNING **: Couldn't properly parse desktop file
'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file
doesn't contain
Package: weborf
Version: 0.13-2
Severity: minor
Dear Maintainer,
just noticed the description of weborf needs a s/webeserver/webserver/
regards robert
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel:
If the reported problem is a local modification, it needs to be fixed
manually. These are typically due to obsolete conffiles being left after
a package has been removed, but not purged. It is suggested that these
are removed by running:
dpkg --purge fuse initscripts initscripts
Package: remuco-clementine
Version: 0.9.6-1
Severity: grave
Tags: sid
Justification: renders package unusable
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package is no longer
installable in sid:
Package: remuco-clementine
Source: remuco
Hi,
Actually there seems to be another problem after this, when building the
Java bindings. I wonder if Build-Depends: default-jdk is really
acceptable for platforms without an openjdk:
Setting up gcj-4.7-jdk (4.7.0-4) ...
Setting up gcj-jdk (4:4.7.0-6) ...
Setting up default-jdk (1:1.5-47)
Package: kword
Version: 1:2.4.2+1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package is no longer
installable in sid:
Package: kword
Source: calligra-transitional (1)
Version: 1:2.4.2+1
Depends: calligrawords
Package:
Package: apache2-mpm-prefork
Version: 2.2.16-6+squeeze7
Severity: important
Tags: squeeze
Some of our users are not able to upload a file via POST Request by using their
firefox browser. They get error 400 Bad Request.
apache error.log: request failed: error reading the headers
The problem is
On Mon, Jun 11, 2012 at 03:00:24PM +0200, SamLT wrote:
@@ -109,6 +111,8 @@
ip link set $TUN_DEVICE up
ip route add $DYNAMIC_POOL dev nat64
ip route add $IPV6_PREFIX dev nat64
Oh, and ny the way, those two last lines should use $TUN_DEVICE
tags 676636 + pending
thanks
Hello,
The following change has been committed for this bug by
Giuseppe Iuculano iucul...@debian.org on Mon, 11 Jun 2012 16:16:37 +0200.
The fix will be in the next upload.
=
Applied
Source: klibc
Version: 2.0-2
Severity: important
Tags: patch
Building klibc on i386 with an x86_64 kernel produces packages
containing 64-bit binaries. While this can be avoided by running the
build process under setarch i386, it is not nice. The following patch
fixes the problem:
Package: gnome-shell
Version: 3.4.1-5
Severity: important
Dear Debian folks,
starting GNOME 3 the first time for a user formerly having used GNOME 2
(a long time ago) going to the overview(?)/shell(?) with the meta key
and clicking on Anwendungen (Applications) it takes some time, then the
Package: libdvdnav-dev
Version: 4.2.0+20120524-1
Severity: important
Hi Daniel,
the updated snapshot of libdvdnav that you currently uploaded (thanks again for
that) has added API in form of the dvdnav_dup() and dvdnav_free_dup()
functions. However, this addition is not reflected in the
2012/6/10 Tim Gould tgo...@reverb.com.au
I upgraded to trunk (3652) - it worked, but again with the seemingly
spurious RB during DISCHRG.
more than a upsd trace, we need usbhid-ups (-D) to be able to see
what's going on...
Ie, is the device actually reporting RB
Package: system-config-printer-kde
Version: 4:4.7.4-2
Followup-For: Bug #659155
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What
tag 677035 upstream
stop
On Mon, Jun 11, 2012 at 3:04 PM, g.bona...@libero.it wrote:
On Mon, Jun 11, 2012 at 12:05:05PM +0200, Reinhard Tartler wrote:
In order to check if that bug has already been fixed upstream, could
you please install the libavcodec-extra-53 package from backports.org
Nicola Chiapolini wrote:
Dear Maintainer,
When git annex is run from inside a sub-directory of the repository
only the files in this directory get resored to real files.
All other files are still symlinks to a now missing .git/annex directory.
If this was the only repository, these files are
Hi this is my first time, but I would like to help out also! If you
guys don't need me helping with Remmina would you mind pointing me to a
place that does need my help?
I use Remmina on a day to day basis and I want to start giving back to
Debian, I found out about it being up for adoption on
Just got the testing 3.4.1-5 upgrade. No difference in performance, still
just Activities on the right rotated screen and nothing works when
clicked.
--
*Stuart Scharf*
MIT Lincoln Laboratory
s...@ll.mit.edu
781-981-6110
smime.p7s
Description: S/MIME Cryptographic Signature
Gnulib is a source lib.
You do not need to pull 7M
See doc of gnulib-tool
I could send you a bare down gnulib passfd of a few kb if needed
Bastien
Le 11 juin 2012 13:23, Martín Ferrari tin...@debian.org a écrit :
Hi Bastien,
On Mon, Jun 11, 2012 at 6:30 AM, Bastien ROUCARIES
Svante Signell s...@kth.se writes:
emacs 24.1 is soon out and packaging the pre-releases in experimental
simplifies the introduction of emacs24 into sid. The latest pre-release
is 24.0.94, dated today 31/10, see
http://lists.gnu.org/archive/html/emacs-devel/2011-10/msg01298.html
available
Hi Daniel,
could you please give me a testcase for this? What are your sources
files and which command options did you use?
Christoph
Am 28.05.2012 15:43, schrieb Daniel Dickinson:
Package: apt-show-versions
Version: 0.16
Severity: normal
apt-show-versions 0.17 shows Perl use of
forwarded 673324 http://bugzilla.libsdl.org/show_bug.cgi?id=1460
stop
Marking as forwarded since it was reported there, so we're notified
when it's fixed.
I also attached the proposed patch in the report upstream.
Thanks.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
On Mon, Jun 11, 2012 at 10:05:56PM +0900, Jamie Jones wrote:
Ok, I've gone and pulled the logs from before I rolled back to 8.05
release. If you still need a tcp dump, I'll need to do a sandboxed
deployment, as I'm not keen on upgrading from 8.05 to 8.11 - it wasn't
a minor upgrade!
Would
On Mon, Jun 11, 2012 at 4:27 PM, Reinhard Tartler siret...@gmail.com wrote:
tag 677035 upstream
stop
On Mon, Jun 11, 2012 at 3:04 PM, g.bona...@libero.it wrote:
On Mon, Jun 11, 2012 at 12:05:05PM +0200, Reinhard Tartler wrote:
In order to check if that bug has already been fixed upstream,
Package: buildd.debian.org
Severity: normal
Maintainer of stressapptest here.
stressapptest is known to be building and working only on the
following architectures:
amd64 i386 powerpc
I'd appreciate an according entry in Packages-arch-specific
as suggested by Philipp Kern in
101 - 200 of 449 matches
Mail list logo