Package: libreoffice
Version: 4.4.0~rc3-1
Severity: important
Tags: patch
libreoffice fails to build because of this error during configure stage:
configure: WARNING: You are building 64-bit binaries but the JDK
/usr/lib/jvm/java-gcj/bin/java is 32-bit
configure: error: You should pass the --wit
Package: gnome
Version: 1:3.14+3
Severity: normal
Dear Maintainer,
When plugging in, but NOT when removing an external monitor, the laptop's
backlight is reset to 0. I can manually increase the backlight, but after each
hotplug event, the backlight is 0 again.
This may be related to bug #776355
Package: gdm3
Version: 3.14.1-3
Severity: normal
Dear Maintainer,
When booting with 3 monitors, internal laptopscreen, 2 external monitors, GDM
refuses to bring up the login screen, instead it shows 3 black screens with a
cursor. The cursor can happily move between all 3 screens. Booting with onl
On 2015-01-24 18:27, Stéphane Blondon wrote:
> 2015-01-21 17:48 GMT+01:00 Niels Thykier :
>> [...]
>>
>> It was a Nokia Lumia Windows phone. I assume that means it was an
>> internet explorer. Regardless, I reproduced it in Iceweasel's developer
>> mode (see attached screenshot) using the (predef
On Tue, Jan 27, 2015 at 06:04:57AM +, Peter Spiess-Knafl wrote:
> Is this package still active maintained? If not, I would be very
> interested in co-maintaining or adopting the package.
I would say that it is not. I had to upload a version to fix a bug in
a dependency, but I then discovered t
Package: gdm3
Version: 3.14.1-3
Severity: normal
Dear Maintainer,
Whenever I do a cold boot, I see the boot messages on my laptop screen and
monitor in parallel. Whenever GDM starts however, backlight is set to be off.
The secondary monitor still shows the gdm background. The login prompt however
Hi Florian,
Wow - I only vaguely recall ever raising this bug :)
I don't see any value in keeping it open, so please feel free to close
it.
Thanks and best regards,
--
Jakob Kjær Butler
ma...@makob.dk
On 2015-01-26 22:52, Florian Schlichting wrote:
tags 299672 + moreinfo
thanks
Hi Jakob
Niels Thykier (2015-01-27):
> Ok, where would something like this go then? I tried checking out the
> d-i source and I am yet to figure out the place where "random"
> preseedable/expert questions go.
>
> Is this case basically "shove the debconf selections into the target
> system and let the r
Control: tag -1 moreinfo reproducible
Hello Jos,
Jos van Wolput [2015-01-27 14:06 +0800]:
> After upgrading systemd from 218-5 to 218-6 and removing the
> obsolete libsystemd-daemon0, libsystemd-id128-0 and
> libsystemd-journal0 which have been dropped in version 218-6,
> systemctl and journalctl
Package: connect-proxy
Version: 1.101-1
Severity: wishlist
The SOCKS5_PASSWORD and other configuration options should be usable from the
command line. When the parameters for "connect" are set in ~/.ssh/config
there is no option for setting the socks password. While it is possible to
have a glob
Hi Amul,
is this issue fixed with the last upload. I simply forgot to ask before
sponsoring. If yes, usually the bug should be closed in the changelog.
Now we can do it manually.
Kind regards
Andreas.
On Tue, Jan 13, 2015 at 04:05:45PM -0500, Amul Shah wrote:
> Package: fis-gtm
> Vers
Am 27.01.2015 um 08:13 schrieb Michael Biebl:
> control: tags -1 moreinfo
>
> Am 27.01.2015 um 07:06 schrieb Jos van Wolput:
>> Package: systemd
>> Version: 218-6
>> Severity: normal
>>
>> Dear Maintainer,
>>
>> After upgrading systemd from 218-5 to 218-6 and removing the obsolete
>> libsystemd-da
Package: xscreensaver-gl
Version: 5.30-1+b1
Severity: wishlist
File: /usr/lib/xscreensaver/glslideshow
Tags: upstream
I use xscreensaver to view family photos, and often I wish that I'd
see more of the latest photos than all photos with equal
probability. How hard would it be to be to add two cont
control: tags -1 moreinfo
Am 27.01.2015 um 07:06 schrieb Jos van Wolput:
> Package: systemd
> Version: 218-6
> Severity: normal
>
> Dear Maintainer,
>
> After upgrading systemd from 218-5 to 218-6 and removing the obsolete
> libsystemd-daemon0, libsystemd-id128-0 and libsystemd-journal0
> which
On 2015-01-26 00:16, Cyril Brulebois wrote:
> Niels Thykier (2015-01-16):
>> On Thu, 13 Nov 2014 11:08:45 + Simon McVittie wrote:
>>> Another possibility would be to use a low-priority question that is
>>> only shown in the "expert" installer, but can be pre-seeded.
>>
>> Please also keep in
Package: tor
Version: 0.2.5.10-1
Severity: normal
After a default install of tor on a SE Linux system that is in enforcing mode
tor will not start due to the wrong contexts of /var/lib/tor and /var/log/tor.
The solution is to run restorecon whenever chown/chmod is run as any situation
that gives
Hello Alia,
On Fri, Jan 23, 2015 at 09:05:38PM +0100, Alia Toll wrote:
> >Happen this issue only with one specific IMAP Account or mostly with the
> >same servers?
>
> I have now found out, that it mainly happens with one specific
> folder on one server. I also had contact with the administrators
Source: dict-elements
Version: 20001107-a-6
Severity: wishlist
Tags: patch
User: reproducible-bui...@lists.alioth.debian.org
Usertags: timestamps
X-Debbugs-Cc: reproducible-bui...@lists.alioth.debian.org
Hi,
While working on the "reproducible builds" effort [1], we have noticed
that dict-elements
Hi Otto,
On Mon, Jan 26, 2015 at 09:03:28PM +0200, Otto Kekäläinen wrote:
> The page https://mariadb.com/kb/en/security/ has updated and includes
> info about these latest CVEs.
>
> It seems most issues were fixed in 5.5.41/10.0.16.
> One was for 5.5.39/10.0.13.
>
> 10.0.16 hasn't been yet relea
Is this package still active maintained? If not, I would be very
interested in co-maintaining or adopting the package.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: systemd
Version: 218-6
Severity: normal
Dear Maintainer,
After upgrading systemd from 218-5 to 218-6 and removing the obsolete
libsystemd-daemon0, libsystemd-id128-0 and libsystemd-journal0
which have been dropped in version 218-6, systemctl and journalctl complain
about missing libsy
Am 26.01.2015 um 17:00 schrieb Christian Seiler:
> Of course, if you have a better idea of how to do this?
Aside from shipping real native unit files, that's probably the least
invasive change:
- Drop $remote_fs from the open-isci LSB header and replace it with
$local_fs. That looks wrong anyway
On Mon, 26 Jan 2015 10:24:41 + Ian Campbell wrote:
>
> This is actually a kernel issue I think, so reassigning accordingly.
>
> 2c3fc8d26dd0 "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
> was backported to the stable kernel but this commit was reverted in
> mainline via dbdd74763f1f
On Mon, Jan 26, 2015 at 09:54:16PM +, Debian Bug Tracking System wrote:
> Hi! As no more info has been provided
Note that bug submitters don't receive emails sent to the bug.
> and Tobias took the time to test this
> and couldn't reproduce it I'm closing this bug.
>
> Of course, if you can
I encountered the same problem using the newer version
mysql-server=5.5.41-0+wheezy1.
but solved it with uninstalling mysql-server and mysql-server-5.5
and reinstalling both with the specific version mysql-server=5.5.40-0+wheezy1
mysql-server-5.5=5.5.40-0+wheezy1.
I will try to reproduce this prob
Mother Board: GA-970A-UD3 Version 3
Worked fine in 32bit but any non USB3 in AMD64 would not. I enabled IOMMU
in the bios and now everything works correctly (Jessie).
Thanks,
Jared
Package: grass-gui
Version: 6.4.4-1
Severity: important
Dear Maintainer,
It is probably a long time since I used GRASS on Jessie... recently I launched
it for the first time since the last upload.
I Tried to start GRASS from the gnome menu and from a terminal. (first
deleting/moving my .grassr
On Mon, Jan 26, 2015 at 5:49 PM, Don Armstrong wrote:
> On Mon, 26 Jan 2015, Michael Gilbert wrote:
>> Why? Option A, i.e. the only option, is already the status quo, so
>> what's the point?
>
> It affirms the decisions which have been made by the other teams in
> Debian, and resolves this particul
Package: wnpp
Owner: Christopher Hoskin
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libdata-messagepack-stream-perl
Version : 0.07
Upstream Author : Daisuke Murase
* URL : https://metacpan.org/release/Dat
Package: quickml
Severity: normal
Version: 0.7-5
When a user configured :message_catalog => '/usr/share/quickml/messages.ja',
all of auto reaction mails (such as "You are not a member of the mailing
list") will fail due to:
2015-01-26T14:33:05: Unknown Session Error: Encoding::CompatibilityError:
control: reopen -1
control: severity -1 wishlist
control: block -1 by 776346
On Mon, Jan 26, 2015 at 8:47 PM, Stefan Lippers-Hollmann wrote:
> I'm closing this bug, as your patch doesn't -and can't- work (anytime
> soon). Please don't inflate the bug severity, this would be a request
> for a new f
package: src:libpcap
version: 1.6.2-2
severity: wishlist
tags: patch
Hi,
It would be useful to provide a libpcap udeb, for example to support
wpasupplicant on kfreebsd (bug #776338).
Please see proposed patch attached.
Best wishes,
Mike
diff -Nru libpcap-1.6.2/debian/changelog libpcap-1.6.2/deb
Package: dleyna-server
Version: 0.4.0-1
Severity: critical
Justification: breaks unrelated software
Dear Maintainer,
* What led up to the situation?
Sporadically, when watching video, typically using Totem. Any video.
This did not happen until about a month ago (on testing, keeping up
Hi.
I just saw that there is a POSIX ERE matching mode, which can be used to
solve the above issue (the glob matching, which I knew of, alone
wouldn't have so).
So I guess you can close this bug, but I leave it open for now, that you
can double check, whether the observed behaviour is actually de
Also please have a look at bug #776341, which is why I think that the
following should perhaps be clarified a bit more:
- that multiple matches of the same field are not supported. e.g.
release a=testing,a=unstable
will neither have the effect of AND nor OR, it is simply "the last one
wins"
-
Package: gksu
Version: 2.0.2-9
Severity: normal
Dear Maintainer,
I've tried to open leafpad as a root via gksu, but leafpad was not responding
(did not have the menu) untill I killed gksu using Task Manager.
On the other hand launching leafpad from root terminal was fine.
-- System Information:
Hi shirish शिरीष,
On Dienstag, 27. Januar 2015, shirish शिरीष wrote:
> Also Micha Lee made a new 0.1.9 release around 4 days back so guessing
> the new one would be the best.
I'm well aware - just not sure whether I think 0.1.9 is the best for jessie or
0.1.7 plus the new signing key and the fix
Package: tecnoballz
Version: 0.93.1-2
Severity: wishlist
Hello again :),
When tecnoballz has been launched with --verbose option, it is recorded
and every subsequent run will be verbose. The only way I found to
disable the verbose option is by editing by hand the config file.
Actually, I'd even
Package: tecnoballz
Version: 0.93.1-2
Severity: normal
Hello again,
It seems that the jauge for the Gigablitz doesn't work anymore.
Regards,
Celelibi
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experi
Source: apt
Version: 1.0.9.6
Severity: normal
Hi.
I recently noted a "bug" in my own apt_preference configuration... what I
do is roughly the following:
I have a Debian installed as e.g. stable, but wish to take certain packages
from other suites, so I enable these suites in sources.list, e.g.
Control: retitle -1 RFP: cool-retro-term -- eye-candy terminal emulator which
mimics old cathode displays
It has been renamed cool-retro-term. There are also actual releases:
0.9
1.0.0-RC1
1.0.0
The upstream provides a debian/ dir that produces a working package, but has
at least completely wro
Package: kernel-package
Version: 13.014+nmu1
Severity: normal
X-Debbugs-CC: Jonathan Wiltshire
User: debian...@lists.debian.org
Usertags: obsolete-conffile adequate
The recent upgrade did not deal with obsolete conffiles properly.
Please use the dpkg-maintscript-helper support provided by dh_inst
2015-01-26 16:22 UTC+01:00, Markus Koschany :
> Control: tags 776263 confirmed
>
> On 26.01.2015 02:46, Celelibi wrote:
>> Package: tecnoballz
>> Version: 0.93.1-2
>> Severity: normal
>>
>> Hello,
>>
>> Apparently, right clicking when loosing the last ball cause a game
>> over instead of simply loo
Package: tecnoballz
Version: 0.93.1-2
Severity: wishlist
Hello,
This is a minor graphic bug.
When some balls are being held by the "corner relaunchers" (do they have
an official name?) and a bonus is caught that change the ball size, the
balls drawn into the relaunchers are slightly offset compa
tags 776331 + pending
thanks
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Followup-For: Bug #775350
Control: found -1 2.25.2-4.1
maintscript has a wrong path (and version):
-symlink_to_dir /usr/share/doc/libblkid-dev /usr/share/doc/libblkid 2.25.2-4
+symlink_to_dir /usr/share/doc/libblkid-dev /usr/share/doc/libblkid1 2.25.2-4.2~
Andreas
--
To UNSUBSCRIBE, email to
If 'After=NetworkManager-wait-online' is
added to the service, distccd comes up fine
with --listen= as an option.
systemctl cat distccd
# /etc/systemd/system/distccd.service
[Unit]
Description=Distccd A Distributed Compilation Server
After=NetworkManager-wait-online.service
[Service]
User=nobody
package: src:wpa
version: 2.3-1
severity: important
tags: patch
Hi,
The kfreebsd installation media currently lack wpa support. Here is a
patch that adds support for building the udeb.
Best wishes,
Mike
diff -Nru wpa-2.3/debian/changelog wpa-2.3/debian/changelog
--- wpa-2.3/debian/changelog 201
Source: apt
Version: 1.0.9.6
Severity: wishlist
Hi.
Right now apt_preferences(5) doesn't really clearly explain
how multiple conditions for pins can be combined (i.e. via
logical AND).
The manpage only gives some implicit documentation via
specifiv examples, e.g.
Pin: release a=stable, v=8
I
Package: notification-daemon
Version: 3.14.1-1
Severity: normal
Usertags: conffile
User: debian...@lists.debian.org
Usertags: obsolete-conffile adequate
The recent upgrade did not deal with obsolete conffiles properly.
Please use the dpkg-maintscript-helper support provided by dh_installdeb
to rem
Package: adequate
Severity: wishlist
I have a machine pinned to experimental with lots of different desktops
and other packages installed and regularly upgrade it to find
obsolete-conffile reports. Currently I have to wade through lots of
complaints from adequate at the end of each apt run. It wou
Source: apt
Version: 1.0.9.6
Severity: wishlist
Hi.
It seems that there is no general way of quoting the conditions.
in apt_preferences (i.e. the Pin: lines).
So having repos like deb-multimedia, which contain spaces in some
of their fields, e.g.:
Origin: Unofficial Multimedia Packages
Labe
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock
Please unblock package pmailq
The current version of pmailq in jessie has a very annoying bug which
make it crash while using the "del" command.
Without the "del" command working properly,
package: src:kfreebsd-10
version: 10.1~svn274115-1
severity: important
The kfreebsd-amd64 installer currently fails for low memory systems.
$ kvm -m 128 -cdrom debian-jessie-DI-rc1-kfreebsd-amd64-netinst.iso jessie.img
[...]
pid 32 (devd), uid 0, was killed: out of swap
Killed
Something wicked ha
Package: pulseaudio
Version: 5.99.2-2
Severity: normal
Usertags: conffile
User: debian...@lists.debian.org
Usertags: obsolete-conffile adequate
The recent upgrade did not deal with obsolete conffiles properly.
Please use the dpkg-maintscript-helper support provided by dh_installdeb
to remove these
I was still receiving errors on OS X when using the fakeroot package even
after applying Mikhail's patches. In particular, the next_openat function
never gets defined, which means that if openat is called, it will fail out
when it can't find the symbol.
The challenge with fixing this is that opena
Hi all,
I just came across this bug myself. Once, twice, thrice then I
investigated what the issue might be. Went to the cache and compared
the sha256sum of the file downloaded with the one given at the tor
project. Saw that it matched, then concluded then it's the small
python egg which might be t
On Mon, Jan 26, 2015 at 01:56:41PM -0800, Don Armstrong wrote:
> On Mon, 26 Jan 2015, Steve Langasek wrote:
> > I believe this covers everything I was concerned about, no further edits
> > warranted from my side. I'm happy for this to be called to a vote if you
> > are.
> I call for a vote on the
FWIW, I reinstalled another laptop with jessie rc1, and adding a printer
in GNOME fails due to the same problem. If it matters, the printer is a
HP LaserJet P2055DN.
/Simon
pgp8Pd9sOBVaa.pgp
Description: OpenPGP digital signatur
The current version of the libconstantine-java package is in the (old?)
pkg-java subversion repository. Let’s move it to git, and update to 0.8.6.
However the package has been renamed to jnr-constants in 2011-2012. View the
git commit log to see the gradual deprecation of the name constantin
Package: php-kdyby-console
Version: 2.3.0-1
Severity: grave
Tags: sid
Justification: renders package unusable
User: debian...@lists.debian.org
Usertags: piuparts
Control: affects -1 + php-kdyby-console
Hi,
during a test with piuparts I noticed your package is no longer
installable in sid:
The
Thank you very much, the work around that you comment work here too
On Mon, Jan 26, 2015 at 11:48 PM, wrote:
> Hi,
>
> I can reproduce the issue on my amd64 computer.
>
> A work-around I've found is to press "Enter" twice rapidly when being
> asked for the language (so that skips the intro com
In Ubuntu, we've applied the attached patch to achieve the following:
* debian/libgcroots0.symbols, debian/patches/aarch64.diff:
- Add AArch64 support.
We thought you might be interested in doing the same.
diff -Nru sigscheme-0.8.5/debian/libgcroots0.symbols
sigscheme-0.8.5/debian/libgcro
Package: installation-reports
Severity: normal
Dear Maintainer,
Installation went fine, but some nits:
1) I tried a graphical install, but the builtin mouse did not work
well: moving the cursor didn't work, but clicking buttons did.
2) It queries for IWLWIFI firmware and mentions the followi
I initially thought I could reproduce with 'emacs -q' but not.
will need to dig further into why this is the case.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
> DEB_ANT_ARGS := -Dbuild.time='$(shell dpkg-parsechangelog --show-field
> Date)'
>
> With Ant the properties defined on the command line take precedence on
> the properties defined in the build file. I'll upload the fix shortly.
Ah, thanks. That's good to know and will be useful elsewhere I'm su
Control: tags -1 pending
Hi,
I have just built the new netcdf-cxx package (4.2.1-1) and I can confirm
that libnetcdf_c++4.a is installed. So this bug will be closed once the
package is uploaded.
Regards,
Ross
signature.asc
Description: OpenPGP digital signature
On 2015-01-26 22:12:19 +0100, Florian Schlichting wrote:
> > mpd should have a read-only mode for clients. Currently, if a user
> > wants to be able to play files of the playlist, he needs the "control"
> > permission, i.e.
> >
> > password "password@read,control"
> >
> > in the /etc/mpd.conf file.
Hi,
I can reproduce the issue on my amd64 computer.
A work-around I've found is to press "Enter" twice rapidly when being
asked for the language (so that skips the intro completely).
More generally there seem to be an issue in the libvlc code:
#0 0x766729f3 in malloc_consolidate (av=a
On Mon, 26 Jan 2015, Michael Gilbert wrote:
> Why? Option A, i.e. the only option, is already the status quo, so
> what's the point?
It affirms the decisions which have been made by the other teams in
Debian, and resolves this particular issue. Issues which are properly
submitted to the CTTE have
Yes that’s absolutely correct. Tony seems to be in charge of
libconstantine-java so an update would be fine.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On Mon, 26 Jan 2015, Don Armstrong wrote:
> I call for a vote on the following resolution to 762194:
[...]
> ==OPTION A==
I vote
A > FD.
--
Don Armstrong http://www.donarmstrong.com
There is no mechanical problem so difficult that it cannot be solved
by brute strength a
On Mon, Jan 26, 2015 at 4:22 PM, Steve Langasek wrote:
> On Wed, Dec 10, 2014 at 11:10:10AM -0800, Don Armstrong wrote:
>> I've attached below an initial draft of an option for #762194 for
>> discussion.
>
>> Steve indicated that he wanted to revise/contribute to this option, so I
>> don't believe
I just noticed the forwarded/upstream bug was marked a duplicate of a
bug that's been in Status: closed-fixed since 2007. Milestone is set to
version 3.2 though, so not sure what this means for the continuing
relevance of this bug?
Florian
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@li
package:cytadela
version: 1.1.0-2
Severity: important
At Debian Sid, with a Intel Card, After game intro, when you press enter key:
$ cytadela
Welcome to the Citadel!
Reading the OpenGL vrsion and extensions...
libGL: screen 0 does no
Reporter here.
I am not able to reproduce this bug for 2 weeks now. If this persists
for the next week I'm going to close the bug.
Regards,
Steven
signature.asc
Description: This is a digitally signed message part
On Mon, 26 Jan 2015, Steve Langasek wrote:
> I believe this covers everything I was concerned about, no further edits
> warranted from my side. I'm happy for this to be called to a vote if you
> are.
I call for a vote on the following resolution to 762194:
==BEGIN==
In #762194, the Technical Co
tags 299672 + moreinfo
thanks
Hi Jakob,
> I would like to be able to specify "new playlist file permissions" in the
> config file so generated playlists can be group-writable.
>
> As of now, the umask is set to 0022 in /etc/init.d/mpd, which is ok with
> regards to the database-file, but too res
Sorry about the delay, first message got caught by the debian spam filter.
Here are the screenshots. Attached.
Thanks,
David
Hi Freddie,
Freddie Exall wrote:
> Git bash completion isn't working for me. I assume this is due to the
> lack of the /etc/bash_completion/git script.
Can you say more about what doesn't work? Some context is in
/usr/share/doc/git/NEWS.Debian.gz:
| Git's bash completion script is now loaded
I discussed the issue with libjpeg-turbo upstream and eog upstream.
libjpeg (-turbo or not) doesn't offer a CMYK-RGB conversion. eog uses
gdk-pixbuf for image decoding, and gdk-pixbuf contains a simplified
CMYK-RGB conversion.
https://bugzilla.gnome.org/show_bug.cgi?id=737440#c9
http://sourceforge
tags 623381 + moreinfo
thanks
Hi Richard,
> mpd is capable of indexing m4a files, but the meta info is not all
> there. the artist name and album name work fine, but the track number
> is always 0 and the genre is sometimes not being read properly.
is that still the case? The part responsible f
Package: repsnapper
Version: 2.3.2a5-1
Severity: normal
Tags: upstream
certain STL files generate completely incorrect (corrupted)
gcode. followup files to be attached in separate report
-- System Information:
Debian Release: 7.4
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'te
On Wed, Dec 10, 2014 at 11:10:10AM -0800, Don Armstrong wrote:
> I've attached below an initial draft of an option for #762194 for
> discussion.
> Steve indicated that he wanted to revise/contribute to this option, so I
> don't believe we should call for votes until that happens.
Sorry to take so
Package: subtitlecomposer
Version: 0.5.3-4
Severity: normal
Dear maintainers of subtitlecomposer,
the installation of the package subtitlecomposer breaks the MIME type
detection of certain PNGs.
Before installation of subtitlecomposer:
| mast:~$ gvfs-info headset.png | grep content-type
|
tags 306501 + moreinfo
thanks
Hi Vincent,
> mpd should have a read-only mode for clients. Currently, if a user
> wants to be able to play files of the playlist, he needs the "control"
> permission, i.e.
>
> password "password@read,control"
>
> in the /etc/mpd.conf file. But the "control" permissi
Bug closed due to a user misconfiguration.
* Elimar Riesebieter [2015-01-23 18:43 +0100]:
> * Detlef Lechner [2015-01-23 15:57 +0100]:
>
> > On 23.01.2015 14:44, Elimar Riesebieter wrote:
> > >* bullgard [2015-01-23 14:16 +0100]:
> > >
> > >>Package: moc
> > >>Version: 1:2.5.0-1$
> > >>
> >
The original debdiff was inverted. Follows the correct one
--
Antonio Terceiro
diff -Nru pound-2.6/debian/changelog pound-2.6/debian/changelog
--- pound-2.6/debian/changelog 2012-02-03 07:50:41.0 -0200
+++ pound-2.6/debian/changelog 2015-01-26 18:29:53.0 -0200
@@ -1,3 +1,12 @@
+p
Package: release.debian.org
Severity: normal
Tags: wheezy
User: release.debian@packages.debian.org
Usertags: pu
Hello release team, and pound maintainers (copied via X-Debbugs-Cc).
The wheezy version of pound has a nasty bug that breaks HTTP → HTTPS
redirects for URL's that contain the '=' ch
Package: wnpp
Owner: Christopher Hoskin
Severity: wishlist
X-Debbugs-CC: debian-de...@lists.debian.org,debian-p...@lists.debian.org
* Package name: libcgi-session-driver-chi-perl
Version : 1.0.3
Upstream Author : James Rouzier.
* URL : https://metacpan.org/release/CGI
Package: mediawiki
Version: 1:1.19.20+dfsg-0+deb7u3
Severity: normal
Dear Maintainer,
Today I started getting delivery failures from a server about mails sent by
the www-data user. I've added a small script to find out what is sending
them. It returned this:
/var/lib/mediawiki/images/shwso.php(7
On 2015-01-26 10:25, Chris Kuehl wrote:
> I wonder whether such a change should at least be documented in the
> release notes, even if we can't address it because of the freeze?
Yes, good idea. This would allow users to remove such libraries
first and then upgrade Debian.
Would you file a bug aga
Package: ftp.debian.org
Severity: normal
Hi,
Moodle has several DFSG issues (e.g. #763800, #746594, #752615, #754565) and
unfixed security issues (#775842).
I have spoken to the maintainers - both upstream [1] and within Debian[2], and
they support the removal of moodle as they are no longer hav
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock
Please unblock package wv
The wv binary package links its documentation to libwv-1.2-4 without
using dh_installdocs --linkdoc and lacks the "(= ${binary:Version})"
dependency required by th
Package: flashplugin-nonfree
Version: 1:3.6.1
Severity: normal
Dear Maintainer,
When going fullscreen on various sites (youtube to name one, but I have
verified with others), the escape key will not exit fullscreen mode. Luckily, I
can Ctrl+Shift+Arrow to another workspace to exit fullscreen, a
Hi,
https://launchpad.net/~tuxpoldo/+archive/ubuntu/roundcube has 1.0.5, for those
interested.
I haven't tested them yet, but will do so shortly.
cheers,
Holger
signature.asc
Description: This is a digitally signed message part.
Source: xen
Severity: important
Tags: security
Hi,
please see http://xenbits.xen.org/xsa/advisory-116.html
for details and a patch.
Cheers,
Moritz
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.de
On Sat, Dec 27, 2014 at 02:27:29PM +0100, Laurent Bigonville wrote:
> On Sat, 20 Dec 2014 08:18:29 +0100 Salvatore Bonaccorso
> wrote:
>
> > Hi,
>
> Hello,
>
> > the following vulnerability was published for libssh.
> >
> > CVE-2014-8132[0]:
> > Possible double free on a dangling pointer with
On Mon, Jan 05, 2015 at 01:47:40AM +1100, Russell Sim wrote:
> Moritz Muehlenhoff writes:
>
> > Source: libgit2
> > Severity: important
> > Tags: security
> >
> > libgit2 is also affected by the recent git vulnerability:
> > http://openwall.com/lists/oss-security/2014/12/18/21
>
> Thanks for the
On Mon, Jan 26, 2015 at 12:25:07AM +0100, Helmut Grohne wrote:
> Package: wv
> Version: 1.2.9-4+b1
> Severity: serious
> Justification: policy 12.3 footnote 2
> Tags: patch
>
> wv contains a symlink /usr/share/doc/wv which points to libwv-1.2-4. Its
> dependency on libwv-1.2-4 is unversioned thoug
1 - 100 of 240 matches
Mail list logo
