On Thu, Apr 07, 2016 at 12:12:13AM +0200, Andreas Beckmann wrote:
> On 2016-04-05 19:29, Ralf Treinen wrote:
> > How it got there I cannot tell. AFAIK, arch=all packages are not rebuild
> > by autobuilders, so the -doc package in the archive should be the one
> > that you have uploaded. Maybe that
Source: wordpress
Version: 4.4.2+dfsg-1
Severity: wishlist
Hello,
I'm running the wordpress package from unstable on wheezy/jessie and up to
now it was working just fine (upgrading only some js packages from time to
time).
But now the package is uninstallable due to the switch to php-* and
libap
Package: python-murano-dashboard
Version: 1:2.0.0~rc2-1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned
directories on the system after purge, which is a violation of
policy 6.8:
https://www.debian.org/do
Package: minidlna
Version: 1.1.5+dfsg-2
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned
directories on the system after purge, which is a violation of
policy 6.8:
https://www.debian.org/doc/debian-policy/
Package: asterisk-config
Version: 1:11.13.1~dfsg-2
Severity: minor
Hi
On asterisk.conf some parameters commented differ from default value:
;maxcalls = 10 ;on config default is not set
;maxload = 0.9 ;on config default is not set
;maxfiles = 1000 ;on config default is not set
This issues was obse
Hi,
On Thu, 31 Mar 2016 01:43:51 +0300
=?UTF-8?B?0JXQstCz0LXQvdC40Lkg0JHQsNGF0YLQuNC9?=
wrote:
> Package: php-horde-webmail
> Version: 5.2.12-2
> Severity: grave
> Tags: sid
>
> I use only 'sid' repository. I install on 'clean' system.
> When I try to complete horde webmail installation with scri
Package: fuel-agent
Version: 9.0~0+2016.03.09.git.b1ba4b7747+dfsg1-1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned files on
the system after purge, which is a violation of policy 6.8 (or 10.8):
https://
Package: libslepc3.6.3,libslepc-complex-3.6.3
Version: 3.6.3.dfsg1-1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned files on
the system after purge, which is a violation of policy 6.8:
https://www.debian
On Thu, 7 Apr 2016 08:15:10 +0200 Mathieu Parent wrote:
> On Thu, 07 Apr 2016 07:46:12 +0200 Mathieu Parent wrote:
> [...]
> > Patch:
> > git revert 4c4736beed2d0151d69aadbfc156a9d9b3df05c1
>
>
> And mod_proxy should be enabled (a2enmod proxy or apache2_invoke enmod proxy).
I mean proxy_fcgi
> >Vcs-Browser:
> >https://anonscm.debian.org/cgit/users/kaction-guest/complexity.git
> >Vcs-Git: https://anonscm.debian.org/cgit/users/kaction-guest/complexity.git
> please note: std-version is 3.9.8 now.
Fixed. New version on mentors.
--
Accept: text/plain, text/x-diff
Accept-Language: eo,en
On Thu, 07 Apr 2016 07:46:12 +0200 Mathieu Parent wrote:
[...]
> Patch:
> git revert 4c4736beed2d0151d69aadbfc156a9d9b3df05c1
And mod_proxy should be enabled (a2enmod proxy or apache2_invoke enmod proxy).
Cheers,
Mathieu
On mer., 2016-04-06 at 21:33 -0700, Erik Haller wrote:
> I compiled monitor.c and ran the following command:
>
> cat <(monitor) <(xrandr) <(dpkg-query -l xserver-xorg) >
>
> I have one radeon X1300 card with a Y cable going to two monitors.
>
> Attached to this email are the two output files.
Package: jdresolve
Version: 0.6.1-4
Followup-For: Bug #800252
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu xenial ubuntu-patch
Dear Maintainer,
In Ubuntu, the attached patch was applied to achieve the following:
* debian/compat: Indicate compatibility level of 9.
* debian/cont
Package: jbofihe
Version: 0.38-5.1
Followup-For: Bug #800254
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu xenial ubuntu-patch
Dear Maintainer,
In Ubuntu, the attached patch was applied to achieve the following:
* debian/rules:
- Remove legacy DH_COMPAT export.
- Use dh_p
FYI
-- Forwarded message --
From:
Date: Thu, Apr 7, 2016 at 12:05 AM
Subject: [Bug 94757] powerpc64 & 64Kb kernel pagesize not working with nouveau
To: mathieu.malate...@gmail.com
Comment # 6 on bug 94757 from Ben Skeggs
I have a WIP chunk of work which will hopefully address
Control: reassign -1 release.debian.org
Control: retitle -1 nmu python_avro-1.8.0+dfsg-1 . all . -m "Rebuild
with python3.5"
Control: user release.debian@packages.debian.org
Control: usertags -1 + binnmu
Control: severity -1 normal
Hello,
python3-avro as currently built depends on only python3
Package: php7.0-fpm
Version: 7.0.5-2
Severity: normal
Hi Ondrej,
Currently, php7.0 depends on php7.0-fpm | libapache2-mod-php7.0 | php7.0-cgi.
FPM being the default, a smooth experience is expected. Also, this can be a
security risk as PHP source is available.
Patch:
git revert 4c4736beed2d0
Hi Adam,
On Wed, Apr 6, 2016 at 11:20 PM, Adam D. Barratt
wrote:
>
> Please go ahead.
Done. The package is uploaded.
Cheers!
--
Sergei Golovan
Hi Chris,
On Wed, Apr 6, 2016 at 11:47 PM, Chris Lamb wrote:
>> libsqlite3-0: Segmentation fault (core dumped)
>
> Backtrace attached.
In the log the entry points are missing, ie:
#0 0x7f5fda58df46 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
(gdb) bt
#0 0x7f5fda58df46 in ?? () from /
Control: tags -1 pending
Hi Nelson,
On 04/07/2016 06:44 AM, Nelson A. de Oliveira wrote:
> Unless python-shapely is installed, we won't have
> "Vector geometry tools → Polygonize" available in the QGIS geoalgorithms.
>
> While gis-workstation Recommends python-shapely, an user who installed
> qg
Package: python-qgis-common
Version: 2.14.1+dfsg-1
Severity: minor
Hi!
Unless python-shapely is installed, we won't have
"Vector geometry tools → Polygonize" available in the QGIS geoalgorithms.
While gis-workstation Recommends python-shapely, an user who installed
qgis "directly" (ie, without i
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: installation-reports
Severity: normal
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this a
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
I compiled monitor.c and ran the following command:
cat <(monitor) <(xrandr) <(dpkg-query -l xserver-xorg) >
I have one radeon X1300 card with a Y cable going to two monitors.
Attached to this email are the two output files.
On Wed, Apr 6, 2016 at 4:28 AM, Yves-Alexis Perez wrote:
> On mer.,
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
On Thu, Mar 24, 2016 at 11:22:44PM +0100, Christian Hofstaedtler wrote:
> * Olly Betts [160324 22:56]:
> > On Thu, Mar 24, 2016 at 07:52:56PM +0100, Christian Hofstaedtler wrote:
> > > BTW, there's a pkg-config file if you don't want to go via
> > > RbConfig::CONFIG; if you do, it appears the rele
Package: ftp.debian.org
Severity: normal
Hello,
As the RFA [1] has not been taken, and without any effective action [2].
I don't want to keep this package outdated and unmaintained, so please remove
it.
Regards
[1]: https://bugs.debian.org/799539
[2]:
https://lists.alioth.debian.org/piperma
Package: cyclades-serial-client
Version: 0.92
Followup-For: Bug #800212
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu xenial ubuntu-patch
Dear Maintainer,
In Ubuntu, the attached patch was applied to achieve the following:
* debian/rules:
- Remove legacy DH_COMPAT export.
Package: cvs-syncmail
Version: 2.3-1
Followup-For: Bug #800208
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu xenial ubuntu-patch
Dear Maintainer,
In Ubuntu, the attached patch was applied to achieve the following:
* debian/rules:
- Remove legacy DH_COMPAT export.
- Use dh
Package: kicad
Version: 4.0.2+dfsg1-4
Severity: important
Dear Mr Khaznadar,
I have recently installed KiCAD 4.0.2 fresh on this computer. Upon
opening Cvpcb, the following error appears:
Errors were encountered loading footprints
IO_ERROR: BUILD_GITHUB_PLUGIN not enabled in cmake build environm
Hi,
Am Dienstag, den 05.04.2016, 00:24 -0400 schrieb Michael Gilbert:
> control: severity -1 important
> control: tag -1 moreinfo, unreproducible
>
> On Mon, Feb 29, 2016 at 4:11 PM, Joerg Frings-Fuerst wrote:
> >
> > $ systemctl start isc-dhcp-server
> > Failed to start isc-dhcp-server.service
On Thu Apr 07, 2016 at 06:51:52 +0900, Tatsuya Kinoshita wrote:
> > Confirmed, thank you.
>
> Fixed in the development repo.
>
> -
> https://anonscm.debian.org/cgit/collab-maint/w3m.git/commit/?id=7bb2a4671503c41d63989dcef9ef54dea0c73b43
>
> Will be fixed in the next upload for unstable.
Package: nvidia-kernel-source
Version: 352.79-5
Severity: normal
Dear Maintainer,
Starting in version 352.79-2 I am unable to build the nvidia kernel
module for custom kernels using make-kpkg (part of the kernel-package
package). I have confirmed that the issue is present in both 352.79-5
and 35
On Thu, 2016-04-07 at 00:42 +0530, Satyam Zode wrote:
> Thank you for reviewing patch. I have made all the changes you
> mentioned above. Please find an attachment :-)
This will works better but will still give a crash when both symlinks
are broken and point to a filename of the same length; beca
Yeah, right, it may confuse people. I changed that in Copyright. Take a
look again.
cheers,
sergio-br2
On 06/04/2016 11:36, PICCORO McKAY Lenz wrote:
2016-04-06 9:37 GMT-04:30 Sergio benjamim Rocha filho :
MAME changed its license, but Genesis Plus GX uses the old one.
Also, it's based on s
Mattia,
On 6 April 2016 at 19:58, Mattia Rizzolo wrote:
> I see, cool.
>
> Then, uploaded :)
I saw that it is now on the NEW queue. Thank you very much!
P.s.: can you please push the release tag to the collab-maint repo? :-)
Regards,
Tiago.
--
Tiago "Myhro" Ilieve
Blog: https://blog.myhro.in
On Thu, Apr 7, 2016 at 1:57 AM, Diego M. Rodriguez wrote:
> On my earlier attempts (<=0.5.1-1) I did include some patches that were
> aimed towards fixing pep8/flake8 warnings, although I dropped them on
> the 0.5.3 package. The reason was that upstream has expressed his
> willingness to ignore E5
Package: laptop-mode-tools
Version: 1.69.2-1
Followup-For: Bug #814578
I have this problem too, but it's even worse for me.
The throttling to "50%" ends up mapping to "always stuck at the bog minimum
slowest speed possible".
cpufreq-info -c 0:
driver: intel_pstate
CPUs which run at the same
Package: igtf-policy-classic
Version: 1.73-1
Severity: wishlist
Hi.
Currently the package creates symlinks for all files in /etc/grid-security.
It would be nice if one could:
- disable this completely
- configure the location where they're created
The reasons are:
a) Even in grid environments,
Just started learning about BtrFS now that I have a new hdd that I want
to store my large research data files.
Anyway, I wondered if you needed any help with this, I see that
btrfs-progs now has many new versions out since 4.4 with lots of
bugfixes, currently 4.5.1 according to
https://btrfs.
Control: tags -1 +patch
And here's tested patch.
Cheers,
--
Ondřej Surý
Knot DNS (https://www.knot-dns.cz/) – a high-performance DNS server
On Thu, Apr 7, 2016, at 00:23, Ondřej Surý wrote:
> Package: src:mod-gnutls
> Version: 0.7.2-2
> Severity: serious
> Justification: fails to build from so
Thanks for the report. I was actually just looking into this some the
other day. Hopefully you'll be able to provide some more clarity to my
musings.
On Wed, Apr 06, 2016 at 09:53:47PM +0100, Simon McVittie wrote:
> The difference between vim-gtk and vim-gnome is that vim-gnome links
> libgnome,
On April 6, 2016 09:15:27 PM you wrote:
> Package: digikam
> Version: 4:4.14.0-4
> Severity: important
>
> There is nothing more to say.
Can you provide an example picture where it crashes?
Does it happen with all pictures?
Thanks,
-Steve
signature.asc
Description: This is a digitally signed
Package: src:linux
Version: 3.16.7-ckt25-1
Severity: normal
Dear Maintainer,
* What led up to the situation?
i am running a pretty vanilla jessie (but with an nvidia firmware).
the computer froze.
web browsing both times. today it was an unintentional drag
of a url in iceweasel. (grr, fir
Hi,
> Steven Chamberlain writes:
> > Could someone with access to the hurd-i386 or kfreebsd porter boxes
> > try the attached patch please?
Christoph Egger wrote:
> Start 284: RunCMake.Configure
> 284/371 Test #284: RunCMake.Configure
> ...***Failed3.19 s
Package: linux-image-3.16.0-4-amd64
X-Debbugs-Cc: debian-ker...@lists.debian.org, goflossgo+ker...@gmail.com
Package: src:linux
Version: 3.16.7-ckt25-1
Severity: normal
please don't make me fight this bts.
Dear Maintainer,
* What led up to the situation?
i am running a pretty vanilla jessie
Package: wnpp
Severity: wishlist
Owner: Wookey
* Package name: esp-r
Version : 12.3
Upstream Author : Energy Systems Research Unit, University of Strathcycle
* URL : http://www.esru.strath.ac.uk/Programs/ESP-r_central.htm
* License : GPL2+
Programming Lang: C
After discussing the patches from the debian xchat tree with hexchat
upstream it seemed like a better approach to not include any of them
in the hexchat package. Rather, upstream has some more permanent fixes
on their roadmap, which will be included when they're done. Anyway,
this issue hardly ever
Hi Donald,
I did the changes as you said.
I've removed /debian and left only the /debian-cd.
Also the rsync works now. How do you check if the mirror has been updated?
I can see it has, but you say it hasn't :)
I was using debian.sil.at but it seems old (2 days at least). I've switched
to Lease
Package: diaspora-installer
Tags: l10n patch
Severity: wishlist
Hello,
Please, Could you update the Brazilian Portuguese Translation?
Attached you will find the file pt_BR.po. It is UTF-8 encoded and it is
tested with msgfmt and podebconf-display-po.
Kind regards.
pt_BR.po.gz
Description: app
Package: joe
Version: 4.1-2
Severity: normal
Create a file with some text ... e.g. this bug report ... with lots of
upper and lower case letters.
Start editing with LANG=en_US.UTF-8
Search for "\[a-z]" or "\[A-Z]" or "\[0-9]" -- no matches found.
Search for "\[0123456789]" -- matches found!
Package: bbdb3
Version: 3.1.2-5
Severity: wishlist
hitting h causes
user-error: Info file bbdb does not exist
Package: metche
Tags: l10n patch
Severity: wishlist
Hello,
Please, Could you update the Brazilian Portuguese Translation?
Attached you will find the file pt_BR.po. It is UTF-8 encoded and it is
tested with msgfmt and podebconf-display-po.
Kind regards.
pt_BR.po.gz
Description: application/gzi
Package: manila
Tags: l10n patch
Severity: wishlist
Hello,
Please, Could you update the Brazilian Portuguese Translation?
Attached you will find the file pt_BR.po. It is UTF-8 encoded and it is
tested with msgfmt and podebconf-display-po.
Kind regards.
pt_BR.po.gz
Description: application/gzi
control: owner -1 !
control: tags -1 moreinfo
Hi,
>Vcs-Browser: https://anonscm.debian.org/cgit/users/kaction-guest/complexity.git
>Vcs-Git: https://anonscm.debian.org/cgit/users/kaction-guest/complexity.git
please fix
please note: std-version is 3.9.8 now.
g.
Il Mercoledì 6 Aprile 2016
Hello Bob,
Now we're on the same page, that was an excellent read.
If I could change the script, I would. But it's maintained by the company who
makes the firewall agent and application, so a simple awk or cut will break the
whole operation of the agent if it's not made upstream. Their source co
Followup-For: Bug #817815
Control: found -1 4.7.4+dfsg-1
Hi,
the situation has improved in the last upload, but is not yet completely
resolved:
1m40.5s INFO: dirname part contains a symlink:
/etc/drupal/7/sites/default/files/civicrm (drupal7-mod-civicrm) !=
/var/lib/drupal7/files/civicrm (?)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/06/2016 05:59 PM, Tianon Gravi wrote:
> On 6 April 2016 at 14:23, Tianon Gravi wrote:
>> This isn't really as important in the context of Debian, since
>> we'll supply a separate "debian/", but it's definitely nice to
>> keep them in parity, so
reassign 820212 net-tools
found 820212 1.60+git20150829.73cef8a-2
retitle 820212 ifconfig output format change breaks downstream programs
thanks
Hi Justin,
Justin McZeal wrote:
> Starting from the beginning, ...
:-)
> there is this firewall agent we have
Reading your latest I think I understan
Quoting asu (2016-04-07 00:15:50)
>
>
> On 04/06/2016 11:05 PM, Jonas Smedegaard wrote:
> > Hi Corcodel,
> >
> > Quoting Corcodel Marian (2016-04-06 19:56:35)
> >> On asterisk context is set on public relative to examples from
> >> users.conf which require default context(aka local).
> >> When an
On 04/06/2016 11:05 PM, Jonas Smedegaard wrote:
Hi Corcodel,
Quoting Corcodel Marian (2016-04-06 19:56:35)
On asterisk context is set on public relative to examples from
users.conf which require default context(aka local).
When an new user try to use extensions bellow 6000 is hard to handle
t
Hi
FWIW on the 3.2 build (with the patch) I started untill I noticed it
wasn't quite the right version
Steven Chamberlain writes:
> Andreas Beckmann wrote:
>> 292 - RunCMake.Configure (Failed)
>
> Could someone with access to the hurd-i386 or kfreebsd porter boxes
> try the attached patch p
Source: calibre
Version: 2.54
Severity: normal
Dear Maintainer,
When you have time I would appreciate being able to move a large portion of my
Qt installation to 5.6.0, but Calibre/Calibre-bin are holding everything up
with its build depends. The sooner it gets rebuilt against Qt 5.6.0 the bett
Steven Chamberlain writes:
> Steven Chamberlain wrote:
>> Could someone with access to the hurd-i386 or kfreebsd porter boxes
>> try the attached patch please?
>
> Here's how to run that test on its own, verbosely, in an already-built
> Debian build tree:
>
> $ Build/bin/cmake "-DCMAKE_MODULE_
Steven Chamberlain wrote:
> Could someone with access to the hurd-i386 or kfreebsd porter boxes
> try the attached patch please?
Here's how to run that test on its own, verbosely, in an already-built
Debian build tree:
$ Build/bin/cmake "-DCMAKE_MODULE_PATH=Tests/RunCMake"
"-DRunCMake_GENERA
Hi Robert,
>Actually it was me, who posted the code. I've just seen your e-mail
>after the issue was re-assigned back to ucl.
oops, sorry!
>I can still reproduce the issue on i386, but I guess you use amd64. In
true, indeed
>such a case you need to replace `4' with `8' (the value `4' was e
Hi. Instead of trying to figure out why "sudo wpa_gui" works for you and
not me, I just looked to see what it would take to make wpa_gui for for
the non-root user.
You mentioned something about the netdev group, but none of the wpa
control files have this group; I don't know if this is a bug in th
Package: src:golang-github-miekg-pkcs11
Version: 0.0~git20151009.0.793689b
Severity: serious
Justification: fails to build from source (but built successfully in the past)
Dear maintainer,
could you please switch the golang-github-miekg-pkcs11 to use
(lib)softhsm2 (>= 2.1.0-2)?
I am going to kil
Package: src:mod-gnutls
Version: 0.7.2-2
Severity: serious
Justification: fails to build from source (but built successfully in the past)
Daniel,
could you please switch the mod-gnutls to use (lib)softhsm2 (>= 2.1.0-2)?
I am going to kill softhsm(1) from the archive and yours and some
golang pkc
Package: mount
Version: 2.28~rc2-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package fails to upgrade from
'sid' to 'experimental'.
It installed fine in 'sid', then the upgrade to 'experimental' fails
because it tries to o
On Thu, Apr 07, 2016 at 01:06:10AM +0300, Anton Zinoviev wrote:
>
> Unfortunately, at the moment I have no idea what might have caused this
> strange behaviour.
Ah, it just occured to me that maybe you have observed the following:
1. fsck displays its messages with correct non-break space.
2.
On 2016-04-05 19:29, Ralf Treinen wrote:
> How it got there I cannot tell. AFAIK, arch=all packages are not rebuild
> by autobuilders, so the -doc package in the archive should be the one
> that you have uploaded. Maybe that has changed, as the mail by anbe seems
arch:all packages can be build by
Hi Joel,
On Mon, Apr 04, 2016 at 03:50:04PM +0200, Joel Brunenberg wrote:
> I just now submitted a debian bug for this because I hope that it gets
> fixed in Debian stable,
[...]
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=819976
Bugs of severity "normal" usually don't get fixed/backporte
Package: tiptop
Version: 2.3-2+b1
Severity: normal
Dear Maintainer (myself),
if you run tiptop as the root user and then hit 'e' to list errors,
then it will trigger a floating point exception and tiptop will exit.
Presumably, this happends because there no errors to show if you run
by root, and
On Wed, Apr 06, 2016 at 07:02:03PM +0200, rpnpif wrote:
>
> In fr_FR.UTF-8 charset, Lat15 for console-setup or also guest charset,
> console-setup change the non-breaking space in the boot message of
> systemd to garbage character.
Unfortunately, at the moment I have no idea what might have cau
Control: tags -1 + patch pending
pgpBq9KCZoqJl.pgp
Description: PGP signature
Package: wnpp
Severity: wishlist
Owner: Jonas Smedegaard
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
* Package name: groestlcoin
Version : 2.11.0
Upstream Author : The Groestlcoin developers
* URL : http://www.groestlcoin.org/
* License : Expat
Programming
Package: openldap
Version: 2.4.42+dfsg-2
Code located in file libraries/libldap/tls_g.c, containing an
interface to GnuTLS, suffers from a bug causing the configuration
variable tls_reqcert to be read from previously freed memory, thus
assuming random values or causing a segfault. This has been ob
Hi again Lucas,
so I did some digging and it seems that it actually works the same way
in Grid5000 and my machine.
If you add a user (eg., adduser test) and then start some processes as
by user, they will be shown in "tiptop -i -U", if you run it by root.
If you look into the code, when run by r
It has been sent upstream, but the clisp project has no maintainers at the
moment.
Thanks
Flavio
On 3 April 2016 at 23:20, Christoph Egger wrote:
> Control: severity -1 important
> Control: tag -1 +patch
>
> Hi!
>
> I'll include that in the next upload for sure .. hopefully this
> week. Ideally
On 6 April 2016 at 14:23, Tianon Gravi wrote:
> This isn't really as important in the context of Debian, since we'll
> supply a separate "debian/", but it's definitely nice to keep them in
> parity, so I'll go do a re-sync and see where we're at!
dh_install: Cannot find (any matches for) "refind-
Hi,
Andreas Beckmann wrote:
> 292 - RunCMake.Configure (Failed)
Could someone with access to the hurd-i386 or kfreebsd porter boxes
try the attached patch please?
Thanks,
Regards,
--
Steven Chamberlain
ste...@pyro.eu.org
--- a/Tests/RunCMake/Configure/RunCMakeTest.cmake
+++ b/Tests/RunCMa
Control: -1 + patch pending
>>cat $file | w3m -dump
>> (gdb) bt
>> #0 wc_any_to_ucs (cc=...) at ucs.c:274
>
> Confirmed, thank you.
Fixed in the development repo.
-
https://anonscm.debian.org/cgit/collab-maint/w3m.git/commit/?id=7bb2a4671503c41d63989dcef9ef54dea0c73b43
Will be fixed in
Hi,
> libsqlite3-0: Segmentation fault (core dumped)
Backtrace attached.
Regards,
--
,''`.
: :' : Chris Lamb
`. `'` la...@debian.org / chris-lamb.co.uk
`-
lamby@d0a58556b1e8(lamby-debian-sid):/tmp/buildd/python-django-1.9.5/tests% gdb
/usr/bin/python ./core
On Sun, 03 Apr 2016 14:32:59 +0100
Ben Hutchings wrote:
(...)
> Sorry about this. There was one earlier similar report which I meant
> to investigate but didn't find time before the point release.
>
> All three call traces are very similar and, based on the functions
> listed, I believe the att
1 - 100 of 335 matches
Mail list logo