Possibly important information: the docker container is running on a
networked file system.
//fileShares.X.X.X/Bioinformatics on /var/autofs/Bioinformatics type
cifs (rw,relatime,vers=3.0,sec=ntlmssp,cache=strict,
username=XXX,domain=XXX,uid=0,noforceuid,gid=0,
Since I upgraded to kernel 5.16.0-1-amd64, I no longer have those
segfault messages in the logs. I do not known wether the kernel or the
reboot is responsible for this
Hi Andres
> I'm a bit confused by this bug report. Why do you need chromium
> (presumably over https) talking to network hardware drivers? Or do
> you mean you have older network hardware where the firmware exposes
> an https port, and chromium no longer supports the older SSL
> protocols that
On 2/17/22 02:21, Benoît Panizzon wrote:
Hi Andres
I'm a bit confused by this bug report. Why do you need chromium
(presumably over https) talking to network hardware drivers? Or do
you mean you have older network hardware where the firmware exposes
an https port, and chromium no longer
PS to last mail: Here
https://salsa.debian.org/med-team/plink2/-/jobs/2479769
is a full test log in our Gitlab CI for the latest version which I just
injected into the packaging Git repository but did not upload yet.
Kind regards
Andreas.
--
http://fam-tille.de
Control: reopen -1
Control: tags -1 confirmed
Control: tags -1 upstream
Control: forwarded -1 Christopher Chang
Hi Christopher (and Dylan),
I verified the latest version (29 Jan 2022) of plink2 with the same
result for the CI test we are doing in Debian (which was written by
Dylan):
$ plink2
On 11/5/2021 1:59 PM, Bertrand Marc wrote:
After upgrading to bullseye, scanning with my HP Scanjet 5300C (ID
03f0:0701 HP, Inc ScanJet 5300c/5370c) became difficult.
Please note that it was working fine with buster, except that it
required the attached /etc/sane.d/avision.conf and works with
Hi,
Craig Small (2022-02-17):
> On Sat, 12 Feb 2022 at 20:35, intrigeri wrote:
>
>> So it seems to me a good solution may be to allow being ptraced
>> in the "apache2-common" abstraction.
>>
> That makes sense.
:)
>> Would one of you be interested in proposing this upstream?
>>
>> I'm not
Package: libc6
Version: 2.33-6
Severity: important
X-Debbugs-Cc: b...@gringene.org
Dear Maintainer,
I'm not sure which package this bug is linked to; I'm fairly confident it's one
of the following:
fontconfig-config libbrotli-dev libbrotli1 libc-bin libc-dev-bin libc-l10n
libc6 libc6-dev
libwebp 1.2.1-7 has been successfully uploaded to unstable.
Anthony and Iustin, help is very strongly appreciated for the NMUs.
On Thu, Feb 17, 2022 at 6:07 AM David Ward wrote:
>
> On 2/23/2021 8:13 AM, Martin-Éric Racine wrote:
> > $ sudo sane-find-scanner
> > found USB scanner (vendor=0x04a9 [Canon], product=0x2220 [CanoScan],
> > chip=LM9830) at libusb:002:003
> > found USB scanner (vendor=0x0411 [Ralink],
On 2/23/2021 8:13 AM, Martin-Éric Racine wrote:
$ sudo sane-find-scanner
found USB scanner (vendor=0x04a9 [Canon], product=0x2220 [CanoScan],
chip=LM9830) at libusb:002:003
found USB scanner (vendor=0x0411 [Ralink], product=0x00e8 [802.11 n
WLAN]) at libusb:001:004
found USB scanner
Hi Benno,
> I have looked at the apache2 log files and checked the /etc/php and
> /etc/davical directories if there were any references to php7 instead
> of php/php8. The apache2 log file reported
>
> [Mon Jan 24 11:29:29.678647 2022] [php:notice] [pid 684] [client /IPv6
> address/] davical:
On Sun, Feb 13, 2022 at 08:00:15AM +0100, Lucas Nussbaum wrote:
> Source: awl
> Version: 0.62-1
> Severity: serious
> Justification: FTBFS
> Tags: bookworm sid ftbfs
> User: lu...@debian.org
> Usertags: ftbfs-20220212 ftbfs-bookworm
>
> Hi,
>
> During a rebuild of all packages in sid, your
It seems very likely that the original problem is an upstream bug in
SANE. There are a few issues reported there specifically against the
Canon LiDE 220 that sound very similar:
https://gitlab.com/sane-project/backends/-/issues/439
https://gitlab.com/sane-project/backends/-/issues/518
On
https://www.jwz.org/xscreensaver/faq.html#typeahead
• I used to be able to start typing my password before the unlock
dialog had appeared, but now I have to wait for the prompt.
This is an inevitable consequence of the new security model introduced in
XScreenSaver 6.00. The old
On 2022-02-17 00:35:40 +0100, Andreas Beckmann wrote:
> On 16/02/2022 15.10, Vincent Lefevre wrote:
> > On 2022-02-15 13:06:57 +0100, Andreas Beckmann wrote:
> > > If you force the installation of the driver with the new X server, can you
> > > confirm that the driver works without complaining
Package: release.debian.org
User: release.debian@packages.debian.org
Usertags: binnmu
X-Debbugs-Cc: by...@debian.org
Severity: normal
While uploading packages related to RIME input method, some of my uploads were
not done source-only. Please
binNMU the following packages to have them rebuilt
Source: xmms2
Version: 0.8+dfsg-22
Severity: serious
X-Debbugs-Cc: sramac...@debian.org
Tags: sid bookworm
Upstream development of xmms2 has seized. There is no activity at
https://github.com/xmms2 and xmms2.org no longer exists. The last
upstream release was in 2011, so it's time to let it go.
Source: tree-puzzle
Version: 5.3~rc16+dfsg-8
Severity: wishlist
Tags: patch
User: reproducible-bui...@lists.alioth.debian.org
Usertags: randomness
X-Debbugs-Cc: reproducible-b...@lists.alioth.debian.org
Hi,
Whilst working on the Reproducible Builds effort [0] we noticed that
tree-puzzle could
On 16/02/2022 15.10, Vincent Lefevre wrote:
On 2022-02-15 13:06:57 +0100, Andreas Beckmann wrote:
If you force the installation of the driver with the new X server, can you
confirm that the driver works without complaining about an ABI mismatch?
This seems to work on my desktop machine at my
Package: user-mode-linux
Version: 5.16um1
Severity: normal
File: /usr/bin/linux.uml
X-Debbugs-Cc: quake2i...@gmail.com
Dear Maintainer,
* What is the problem:
Issuing the commands stop followed by go, at the input of the uml_mconsole
client, results in the client becoming blocked on read socket.
On Thu, Oct 29, 2020 at 12:14:58PM +0100, Adam Borowski wrote:
> On Thu, Oct 29, 2020 at 10:42:21AM +0100, Julian Andres Klode wrote:
> > On Thu, Oct 29, 2020 at 02:54:46PM +0900, Ryutaroh Matsumoto wrote:
> > > Source: apt
>
> > Well valgrind is not available on armel, so the test suite
> >
Source: mplayer
Version: 2:1.4+ds1-3
Severity: serious
X-Debbugs-Cc: sramac...@debian.org
Tags: sid bookworm
Let's stop pretending that mplayer is maintained. The upstream mailing
list infrastructure is gone and development has been minimal over the
last couple of months and years. So I think we
Package: java
Severity: wishlist
Tags: newcomer
Dear Maintainer,
* What led up to the situation?
I was trying to install the Java runtime environment, so I ran
"apt-get install java", which seems like a sensible course of
action.
* What exactly did you do (or not do) that
Control: title -1 mate-tweak: Unpleasant transition from marco-compton to
marco-picom
Control: clone -1 -2
Control: reassign -2 ftp.debian.org
Control: retitle -2 RM: silan -- RoQA; unmaintained upstream
Control: tags -2 =
Control: severity -2 normal
On 2022-01-31 09:47:21 +0200, Kyle Robbertze wrote:
> Silan is no longer maintained upstream, so probably should be removed as I
>
clone 1005169 -1
reassign -1 src:plasma-desktop
retitle -1 plasma-desktop: plasma-desktop should probably depend upon
xdg-desktop-portal-kde
affects chromium -1
thanks
Rather than just reassigning this, I'm going to leave it open for a
while with chromium. Even if it gets fixed in
On Tue, Jan 18, 2022 at 05:15:39PM +0100, Florian Ernst wrote:
> On Fri, Aug 24, 2018 at 03:14:18PM +0200, Sebastien Bacher wrote:
> > There is a new upstream version available, it would be nice to get the
> > update in Debian
> > https://github.com/jpirko/libndp/commits/v1.7
>
> FWIW, by now
Source: expat
Version: 2.4.4-1
Severity: important
Tags: security upstream
Forwarded: https://github.com/libexpat/libexpat/pull/562
X-Debbugs-Cc: car...@debian.org, Debian Security Team
Hi,
The following vulnerability was published for expat.
CVE-2022-25235[0]:
| xmltok_impl.c in Expat (aka
Source: expat
Version: 2.4.4-1
Severity: important
Tags: security upstream
Forwarded: https://github.com/libexpat/libexpat/pull/561
X-Debbugs-Cc: car...@debian.org, Debian Security Team
Hi,
The following vulnerability was published for expat.
CVE-2022-25236[0]:
| xmlparse.c in Expat (aka
On 16/02/2022 21:01, Eric Valette wrote:
On 16/02/2022 20:58, Alex Deucher wrote:
On Wed, Feb 16, 2022 at 2:56 PM Eric Valette
wrote:
Here is the dmesg. For bisecting, I'm not home and the Intrenet
connection is just too slow.
In order to help a bit, I started to build kernel with the
On Sat, 12 Feb 2022 at 20:35, intrigeri wrote:
> So it seems to me a good solution may be to allow being ptraced
> in the "apache2-common" abstraction.
>
That makes sense.
> Would one of you be interested in proposing this upstream?
>
> I'm not using Apache2 myself so I'm not a good person to
On Wed, Feb 16, 2022 at 11:05 PM Simon Kelley wrote:
> On 16/02/2022 20:19, Martin-Éric Racine wrote:
> > The startup message DOES suggest that DHCP is bound to an exclusive
> > interface, not to wildcard. This is misleading.
>
> No it's not. it calls setsockopt(SO_BINDTODEVICE) which binds the
Am Wed, Feb 16, 2022 at 09:00:28PM +0100 schrieb Jose Luis Rivero:
>
> No worries Emmanuel, thanks for your offer to help. I have not pinged the
> ftp-master team yet,
> so you are on time to help the poor Gazebo to go to testing :)
camitk was accepted and I have done a source-only upload.
Kind
Hello,
On Wed 16 Feb 2022 at 02:39PM +01, Andrej Shadura wrote:
> Hi,
>
> On Fri, 11 Feb 2022 14:30:50 +0100 (CET) Guido Günther
> wrote:
>> tag 1005321 pending
>> thanks
>>
>> Date: Fri Feb 11 11:35:01 2022 +0100
>> Author: Guido Günther
>> Commit ID:
Package: dh-haskell
Version: 0.5
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi Felix,
Wonderful initiative!
Please have the binary package "Provides: dh-sequence-haskell"
to make it even easier for consuming packages:
Instead of build-depending on dh-haskell and "--with"
Hello,
On Mon 14 Feb 2022 at 11:02AM -05, Jay Berkenbilt wrote:
> I'm hoping a new pikepdf version will come out with this fix soon so
> just uploading a new pikepdf will unblock the qpdf transition. Since
> debian maintenance of pikepdf has generally been very responsive, I
> won't plan on
On 16/02/2022 20:19, Martin-Éric Racine wrote:
The startup message DOES suggest that DHCP is bound to an exclusive
interface, not to wildcard. This is misleading.
No it's not. it calls setsockopt(SO_BINDTODEVICE) which binds the socket
to the physical interface, instead of to a IP
Package: libwlroots10
Version: 0.15.0-2
Severity: important
X-Debbugs-Cc: lukan...@gmail.com
Dear Maintainer,
when running with propertiary Nvidia drivers, an attempt to start sway
compositor results in following error:
sway: render/wlr_renderer.c:240: wlr_renderer_init_wl_shm: Assertion
Hi Thorsten,
Am Wed, Feb 16, 2022 at 07:00:08PM + schrieb Thorsten Alteholz:
> our hardworking trainees added to note to your package:
Kudos to the trainees!
> pangoLEARN\data\decisionTreeHeaders_v1.joblib seems to be binary.
> Same for pangoLEARN\data\decisionTree_v1.joblib.
>
> So,
On Wed, Feb 16, 2022 at 10:31 PM Marc Haber
wrote:
>
> On Wed, Feb 16, 2022 at 07:15:37PM +0200, Martin-Éric Racine wrote:
> > I cannot help but wonder why the build doesn't simply parse
> > $(HARDENING_CFLAGS) and $(HARDENING_LDFLAGS). Hard-coded hardening
> > options tend to be a bad idea. GCC
Source: runc
Version: 1.1.0+ds1-1
Severity: serious
X-Debbugs-CC: debian...@lists.debian.org
Tags: sid bookworm
User: debian...@lists.debian.org
Usertags: flaky
Dear maintainer(s),
I looked at the results of the autopkgtest of you package on amd64
because with a recent upload of glibc the
On Wed, Feb 16, 2022 at 07:15:37PM +0200, Martin-Éric Racine wrote:
> I cannot help but wonder why the build doesn't simply parse
> $(HARDENING_CFLAGS) and $(HARDENING_LDFLAGS). Hard-coded hardening
> options tend to be a bad idea. GCC supports them all, but the target
> host's CPU won't always
Source: gsocket
Version: 1.4.33-1
Severity: serious
X-Debbugs-CC: debian...@lists.debian.org
User: debian...@lists.debian.org
Usertags: flaky
Dear maintainer(s),
I looked at the results of the autopkgtest of you package on armhf
because it was showing up as a regression for the upload of
The startup message DOES suggest that DHCP is bound to an exclusive
interface, not to wildcard. This is misleading.
Meanwhile TFTP is not meant to appear on loopback.
Martin-Éric
On Wed, Feb 16, 2022 at 10:11 PM Simon Kelley wrote:
>
> 67 is DHCP and always binds the wildcard: that's necessary
Upstream hasn't yet made a release that includes the fix.
Since this is currently affecting the software on certain hosts and
making it impossible to connect to hosts using Let's Encrypt
certificates (we're seeing this problem with a production host), I'm
wondering if the patch could be
Source: dbus
Version: 1.12.20-3
Severity: serious
X-Debbugs-CC: debian...@lists.debian.org
User: debian...@lists.debian.org
Usertags: flaky
Dear maintainer(s),
I looked at the results of the autopkgtest of you package on ppc64el
because it was showing up as a regression for the upload of
67 is DHCP and always binds the wildcard: that's necessary to make DHCP
work. It checks the arrival address of packets and discards those which
are not valid.
interface= is documented to listen on the addresses of the given
interface AND LOOPBACK. If you want to exclude loopback, you can do
Package: man-db
Version: 2.9.4-4
Severity: normal
X-Debbugs-Cc: off...@klepp.biz
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
$ man open
* What exactly did you do (or not do) that was effective (or
bind-enterfaces is supposed to restrict the services to exactly those
defined in interfaces. It currently doesn't.
My reduced config:
bogus-priv
conntrack
dns-loop-detect
dnssec
domain-needed
domain=lan
local=/lan/
expand-hosts
dhcp-hostsfile=/etc/dhcp-hostsfile
dhcp-fqdn
I'm not clear what you think is happening, and what you want to happen.
bind-interfaces works for tftp; there will be a socket for each address
on each valid interface bound to that address and port 69
no-dhcp-interface does indeed suppress tftp on that interface too, and
is documented so to
On Wed, Feb 16, 2022 at 8:32 AM Emmanuel Promayon <
emmanuel.proma...@univ-grenoble-alpes.fr> wrote:
> Dear Jose and Andreas,
>
> On 14/02/2022 17:02, Andreas Tille wrote:
>
> Am Mon, Feb 14, 2022 at 12:18:47AM +0100 schrieb Jose Luis Rivero:
>
> You are welcome. This bug is preventing one of my
I have released qpdf 10.6.2, and a new pikepdf should be coming out imminently
as well. This gets us back in sync -- the new pikepdf tests pass against 10.6.2.
On Wed, Feb 16, 2022 at 2:56 PM Eric Valette wrote:
>
> On Tue, 15 Feb 2022 15:42:27 -0500 Alex Deucher
> wrote:
> > What chip is this? Can you provide the full dmesg output?
>
> Its a a renoir chip with a second gpu : [Radeon RX 5500/5500M / Pro 5500M].
Thanks. Can you attach the dmesg
On Tue, 15 Feb 2022 15:42:27 -0500 Alex Deucher
wrote:
What chip is this? Can you provide the full dmesg output?
Its a a renoir chip with a second gpu : [Radeon RX 5500/5500M / Pro 5500M].
Processor Information
Socket Designation: FP6
Type: Central Processor
Family:
Hi Jaakko!
Thank you *very* much for the script to reproduce this, thanks to the
script I was able to fix this in a few minutes after years of not
touching debconf-kde (in preparation of a bugfix release).
This issue will be resolved with the next upload.
Cheers,
Matthias
Hi Andreas,
our hardworking trainees added to note to your package:
pangoLEARN\data\decisionTreeHeaders_v1.joblib seems to be binary.
Same for pangoLEARN\data\decisionTree_v1.joblib.
So, please explain what is needed to create these files (and the other data
files as well).
Thanks!
Hi Vasudev,
On Thu, Dec 23, 2021 at 6:07 PM Sudip Mukherjee
wrote:
>
> On Wed, Dec 22, 2021 at 10:52 AM Vasudev Kamath
> wrote:
> >
> > Hi Sudip,
> >
> > Sudip Mukherjee writes:
> >
> >
> > >
> > > Reported error:
>
>
>
> > >
> >
> > I tried building bpfcc 0.23.0 with experimental libbpf and
Control: forarded -1 https://github.com/systemd/systemd/issues/22538
On Wed, Feb 16, 2022 at 08:11:15AM +0100, Michael Biebl wrote:
> Am 16.02.22 um 02:14 schrieb Noah Meyerhans:
> > However, starting with the systemd 250 upstream releases, configuration of
> > these interfaces fails
On Tue, 10 Aug 2021 16:31:36 -0700 Nolan wrote:
It may be obvious, but I forgot to mention that this is on Bullseye, up
to date as of today (Aug 10th).
This bug is likely related to #991552.
Hello, I probably fixed this bug in debian/2.4.1-2, please check if now it
works correctly.
Control: reassign -1 wnpp
Control: retitle -1 RFP: mathjax3 -- math rendering engine for browsers,
implemented in TypeScript
Control: merge 997945 -1
Control: affects -1 libjs-mathjax
Hi Julien!
On Tue, Feb 08, 2022 at 07:26:03PM +0100, Julien Puydt wrote:
> Package: libjs-mathjax
> Version:
I've tried all amd64 ISO-CD installers available here:
https://cdimage.debian.org/cdimage/daily-builds/daily/
The computer is:
Lenovo X1 Carbon Gen 6
Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
Intel Dual Band Wireless-AC 8265 (iwlwifi loads fine, during installation)
Intel Ethernet Connection (4)
Control: tags -1 pending
Am Wed, Feb 16, 2022 at 05:30:01PM + schrieb Thorsten Alteholz:
> please also mention at least:
> CamiTK-5.0.2/python_sdk/pyside_global.h
> Insight Consortium
> in your debian/coypright.
Thanks for spotting this and filing this bug report which is
fixed in Git
Package: unixodbc-dev
Version: 2.3.9-4
Severity: important
X-Debbugs-Cc: dogs...@debian.org
Dear Maintainer,
unixodbc-dev does not ship unixodbc_conf.h (at least, on amd64 and
i386). The version in stable does ship it, but the version in testing
and unstable does not.
It breaks builds of some
Package: cdimage.debian.org
Severity: grave
Tags: d-i
Justification: renders package unusable
X-Debbugs-Cc: powe...@gmail.com
Dear Maintainer,
For a few days I've been trying to install Debian bookworm using the
net-install ISO (e.g., all of today's). All of them hang when it reaches the
Package: camitk
Severity: serious
Usertags: ftp
User: alteh...@debian.org
thanks
Hi,
please also mention at least:
CamiTK-5.0.2/python_sdk/pyside_global.h
Insight Consortium
in your debian/coypright.
Thanks!
Thorsten
On Wed, Feb 16, 2022 at 6:45 PM Marc Haber
wrote:
> On Tue, Feb 15, 2022 at 09:58:49PM +0200, Martin-Éric Racine wrote:
> > On Tue, Feb 15, 2022 at 9:10 PM Marc Haber
> > wrote:
> > >
> > > On Tue, Feb 15, 2022 at 09:03:01PM +0200, Martin-Éric Racine wrote:
> > > > 1.9.8p2-1 FTBFS on Geode
Hi,
Sorry for the symlink breakage.
On Mon, Feb 14, 2022 at 6:54 PM Michael Biebl wrote:
> While speaking of getting rid off unnecessary complexity: Is the
> separate udeb build still needed?
This is what I sometimes decide to evaluate, but then time goes on
something else. :(
Now I'm going to
Source: binutils-or1k-elf
Followup-For: Bug #1005669
> > Apparently, a configure.ac has been forgotten alongside the generated
> > configure.
> > Commit dd96117a5e1da80ad1f977ea8abe39acc9f7e7cb works around the
> > issue.
> Hmm - I don't see the commit you mention above - did you perhaps forget
Hi,
On Tue, Feb 15, 2022 at 09:58:49PM +0200, Martin-Éric Racine wrote:
> On Tue, Feb 15, 2022 at 9:10 PM Marc Haber
> wrote:
> >
> > On Tue, Feb 15, 2022 at 09:03:01PM +0200, Martin-Éric Racine wrote:
> > > 1.9.8p2-1 FTBFS on Geode testing host (log attached earlier)
> > > 1.9.9-1 FTBFS on
Source: dxvk
Version: 1.9.4+ds1-1
Hi Maintainer
dxvk has an autopkgtest dependency on wine-development, which is an
arch:all package that Depends: wine64-development |
wine32-development.
When dxvk's autopkgtests are run in a pure i386 environment,
wine64-development is not installable, and
Source: modsecurity-apache
Version: 2.9.5-1
Severity: minor
The homepage URL listed in debian/control is
https://github.com/SpiderLapbs/ModSecurity, which doesn't exist.
debian/watch correctly uses https://github.com/SpiderLabs/ModSecurity,
so I guess it's just a typo. Please fix the homepage
On Mon, 27 Dec 2021 09:44:24 -0600 Kody Barks
wrote:
> Kernel 5.10, and an upgrade to Bullseye. This issue is still not fixed.
Hi Kody, can you please share the outputs of the following 3 commands?
lspci -nns :09:00.0
lspci -nns :41:00.0
lspci -nns :42:00.0
Also, do you remember of
Package: runit-init
Severity: grave
Justification: renders package unusable
Dear maintainer,
I just tried to switch to runit-init on bookworm, as I have done many times on
installs of stable (bullseye).
On a new install with only standard system utilities I executed "apt-get
install runit
Hi
I figured out a temporary workaround using ‘ip netns exec’
It works, but things like apticron will still fail.
--
Swimmingly,
Joe
swimgeek.com/blog +27 82 562 6167 instagram.com/joe.swimgeek
"...all progress depends on the unreasonable man.”
> On 16 Feb 2022, at 11:24, Joe
Source: nix
Version: 2.6.0+dfsg-3
Severity: minor
Tags: newcomer
The nix upstream package bundles a convenience copy of toml11. Since toml11
has been packaged now, it should also be used.
Hello!
On 10/3/21 12:43, John Paul Adrian Glaubitz wrote:
> The attached patch fixes the problem for me. It was suggested by Efraim
> Flashner
> in the corresponding upstream bug report [1].
>
> It simply adds "-Oresolve-primitives -Ocps" to GUILE_OPTIMIZATIONS in
> bootstrap/
> Makefile.am. I
Source: nix
Version: 2.6.0+dfsg-3
Severity: minor
Tags: newcomer
The nix upstream package bundles a convenience copy of toml11. Since toml11
has been packaged now, it should also be used.
Package: s3curl
Version: 20171008-1.1
Severity: wishlist
Tags: patch
User: l...@pca.it
Usertags: unige.ch-s3
User: stor...@unige.ch
Usertags: unige.ch-s3
Hi there,
while testing the UNIGE S3 internal instance (not provided by Amazon),
I discovered a patch adding support for the --endpoint (and
Hi,
inasprecali wrote:
> package zsh-common was recently updated from version 5.8-6 to version
> 5.8-6+deb11u1 to address CVE-2021-45444. However, package zsh is still
> stuck at version 5.8-6,
Yeah, something went wrong on the build daemons. We are aware of it
and it should soon be fixed and
Hello,
On 16/02/2022 14:39, Andrej Shadura wrote:
dgit: error: subprocess failed with error exit status 1
! Push failed, before we got started.
! You can retry the push, after fixing the problem, if you like.
Here’s a log of a session in which I reproduced the issue from the
scratch. Sorry
On 8/29/2021 4:12 AM, alain wrote:
$ dpkg -l sane-backends
dpkg-query: aucun paquet ne correspond à sane-backends
sane-backends is the source package name. You cannot install that.
Please run "sudo apt upgrade libsane-common".
$ cat /etc/debian_version
bookworm/sid
$ dpkg-query -l 'hplip*'
Package: wnpp
Severity: wishlist
Owner: Jonas Smedegaard
X-Debbugs-Cc: debian-de...@lists.debian.org, Debian VoIP Team
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
* Package name: jangouts
Version : 0.5.0
Upstream Author : SUSE Linux
* URL :
On Wed, Feb 16, 2022 at 05:01:49PM +0530, Nilesh Patra wrote:
>
> Tony/Tom, Can you do corresponding fixes for unstable too,
> or otherwise move experimental release to unstable?
>
> Otherwise this bug is causing a un-warranted-for autorm, for example in
> parsnp[1]
Hi Nilesh,
Thanks for the
On Sat, Feb 12, 2022 at 08:51:01PM +0100, Enrico Zini wrote:
> That's even better, then: it becomes a matter of documenting the
> procedure to bootstrap an rpm-based distro from Debian: I can test it
> and produce a draft HOWTO.
I tested, and I confirm that this works:
dnf -c "$CONFFILE" -y
On 2022-02-15 13:06:57 +0100, Andreas Beckmann wrote:
> If you force the installation of the driver with the new X server, can you
> confirm that the driver works without complaining about an ABI mismatch?
This seems to work on my desktop machine at my lab.
cventin:~> dpkg -l | grep -E
Hi,
yesterday, I have received new FW from Seagate (SU6SM003) which solves my
problem. Power consumption during s2idle sleep is about 230mW/h.
Sorry for disturbing,
Milos.
Quoting Vignesh Raman (2022-02-16 14:34:17)
> prettify.js is unmaintanined https://github.com/googlearchive/code-prettify.
> node-istanbul has vendored copy of prettify.js and it can that instead of
> prettify.js,
>
> Attached is a patch to remove dependency on libjs-prettify and to use
> the
Package: wnpp
Severity: wishlist
Owner: Stephan Lachnit
X-Debbugs-Cc: debian-de...@lists.debian.org, stephanlach...@debian.org
* Package name: python-headerparser
Version : 0.4.0
Upstream Author : John T. Wodder II
* URL : https://github.com/jwodder/headerparser
*
Package: dnsmasq
Version: 2.85-1
Severity: important
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
If 'enable-tftp' is set, the TFTP server appears on all interfaces. It
completely disregards bind-interfaces and friends. One would think that TFTP
would only be offered on interfaces where
Hi,
On Fri, 11 Feb 2022 14:30:50 +0100 (CET) Guido Günther
wrote:
tag 1005321 pending
thanks
Date: Fri Feb 11 11:35:01 2022 +0100
Author: Guido Günther
Commit ID: 8db5af7326c581014ca07dcd98beac30f2c90d4f
Commit URL:
Package: node-istanbul
Version: 0.4.5+ds+~cs56.14.45-1
Severity: normal
Tags: patch
X-Debbugs-Cc: vignesh.ra...@collabora.com
Dear Maintainer,
prettify.js is unmaintanined https://github.com/googlearchive/code-prettify.
node-istanbul has vendored copy of prettify.js and it can that instead of
Hi all,
I'm not sure if I have the same issue but from impossible for my users
to connect the shared folders with samba>4.13.5 from windows desktop.
Password popup is coming back. Everything works fine with samba 4.13.5
I though the last update would fix the issue but nop.
This server is a
Package: singularity-container
Version: 3.5.2+ds2-1
Severity: important
On Debian 11 note this comes from debian-unstable.
I am attempting to activate a singularity squashfs image from a script that runs
at boot time. Singularity segfaults with the attached debug/traceback in
the attached file
Package: xdg-desktop-portal-wlr
Version: 0.5.0-2
Severity: normal
Hi!
At least chromium has started now to depend on xdg-desktop-portal-backend
which this package does not provide, so it requires installing one of
the other desktop-portal implementations. It would be nice if this
could provide
On 16/02/2022 10:18, Jon Daley wrote:
On Wed, 16 Feb 2022, Matthew Vernon wrote:
[Debian policy is usually that bugs need to be "Important" priority or
higher for fixes to be considered for a stable point release. I'm
assuming you don't think that applies here]
Ok, thanks. Just wanted to
Hi guys,
I am running Debian Stable (Bullseye) in my desktop and in my local server.
Yesterday I made a backport version of the apt-cacher-ng for me and I put it
in the server. The problem seems is solved.
Regards,
Eriberto
Hi,
On 2022-02-16 11:57, John Paul Adrian Glaubitz wrote:
> Hello!
>
> On 2/16/22 11:36, Graham Inggs wrote:
>> Is anyone able to help with the bus error on armhf please?
>
> Bus errors are normally easy to spot. Just run the code in question through
> GDB and see where it crashes. Then look at
Hey Cedric,
I can confirm this issue when rebuilding Perl on powerful systems. Multiple
builds of ‚generate_uudmap.o‘ are
created during the compile time and at some point it fails with:
make -j88 […]
./generate_uudmap uudmap.h bitcount.h mg_data.h
6584make[3]: ./generate_uudmap:
1 - 100 of 135 matches
Mail list logo
