Package: libogg-vorbis-perl
Version: 0.05.ds1-1+b1
Severity: important
Hi,
Niko suggested to remove this package as it is dead upstream, buggy and
alternatives exist (libogg-vorbis-decoder-perl) [1]. libogg-vorbis-perl
also has no rdeps in Debian.
If there are no objections, I will request
Package: libogg-vorbis-header-perl
Version: 0.03-3+b1
Severity: important
User: pkg-perl-maintain...@lists.alioth.debian.org
Usertags: post-squeeze
Hi,
Niko suggested to remove this package as it is dead upstream and
alternatives exist (libogg-vorbis-header-pureperl-perl) [1].
As there are
-k.
+ * debian/copyright: Refer to /usr/share/common-licenses/GPL-2.
+ * debian/control: Add ${misc:Depends}.
+ * debian/rules: Remove Megahal/Makefile.old in clean target.
+ * Remove ./dirs: should be debian/dirs which already exists.
+ * Bump Standards-Version to 3.9.1.
+
+ -- Ansgar
Hi,
I prepared a patch for this issue. It passes the test suite and also
the code snippets that failed before. I am not very familiar with XS,
so any comments are welcome.
The patch can be found at [1].
Regards,
Ansgar
[1]
Niko Tyni nt...@debian.org writes:
On Thu, Aug 26, 2010 at 05:47:53PM +0900, Ansgar Burchardt wrote:
I prepared a patch for this issue. It passes the test suite and also
the code snippets that failed before. I am not very familiar with XS,
so any comments are welcome.
[1]
http
.
+
+ -- Ansgar Burchardt ans...@43-1.org Sat, 28 Aug 2010 14:30:56 +0900
+
vbox3 (0.1.9.4) unstable; urgency=low
* config.sub, config.guess: update from autotools-dev package (thx Cyril
diff -Nru vbox3-0.1.9.4/debian/compat vbox3-0.1.9.4+nmu1/debian/compat
--- vbox3-0.1.9.4/debian/compat 1970-01
-perl
dpkg-buildpackage: source version 3.13007-1
dpkg-buildpackage: source changed by Ansgar Burchardt ans...@43-1.org
dpkg-source --before-build libnet-twitter-perl-3.13007
dpkg-buildpackage: host architecture amd64
/usr/bin/fakeroot debian/rules clean
dh clean
dh_testdir
dh_auto_clean
tags 590654 + patch
thanks
Hi,
I prepared a patch for this issue and plan to upload a NMU once the
changes have been approved by the release team.
The proposed patch can be found in #594654 [1] (it should have been
forwarded here as well, but seems that did not happen).
Regards,
Ansgar
[1]
Hi,
the module name does not comply to a should requirement of the Perl
Policy:
4.2 Module Package Names
Perl module packages should be named for the primary module
provided. The naming convention is to lowercase the Perl module name,
prepend, lib, change all occurrences of :: to -, and
Hi,
I am not too happy about libwww-perl5.808-perl. I see several problems
with this:
1. We obviously don't really want old versions of libraries,
2. This package provides and conflicts with libwww-perl, that means
2a. packages with versioned dependencies on libwww-perl will not be
) character.
+commit id of upstream patch: f97f339f552666ef79cdd2cf2a44032cf206bb6e
+
+ -- Ansgar Burchardt ans...@43-1.org Mon, 30 Aug 2010 01:29:12 +0900
+
libwww-perl (5.813-1+lenny1) stable; urgency=low
* Fix incorrect use of redo. (Closes: #591462)
- -- Ansgar Burchardt ans...@43-1
downloads
to
+filenames suggested by the server that start with a . (dot) character.
+commit id of upstream patch: f97f339f552666ef79cdd2cf2a44032cf206bb6e
+
+ -- Ansgar Burchardt ans...@43-1.org Mon, 30 Aug 2010 01:29:12 +0900
+
libwww-perl (5.813-1+lenny1) stable; urgency=low
Hi,
Steffen M$(D+S(Bller steffen_moel...@gmx.de writes:
On 08/29/2010 06:13 PM, Ansgar Burchardt wrote:
2. This package provides and conflicts with libwww-perl, that means
2a. packages with versioned dependencies on libwww-perl will not be
co-installable with this package (this includes
Hi,
Steffen Möller steffen_moel...@gmx.de writes:
Hello,
On 08/29/2010 05:59 PM, Ansgar Burchardt wrote:
Some packages that use the distribution name instead, but that is not
the case either here (there is an additional - in the package name).
Please consider changing the package name
Ansgar Burchardt ans...@43-1.org writes:
A report on CPAN [1] suggests that it might be easy to fix this module,
but I haven't tested this. If this turns out to be true and other parts
of bioperl1.2.3 don't require the old version, we could at least save us
from packaging the old version
reassign 594709 libmoose-perl 1.09-2
retitle 594709 libmoose-perl: Needs update due to changes in libclass-mop-perl
affects 594709 libnet-twitter-perl
thanks
Ansgar Burchardt ans...@2008.43-1.org writes:
libnet-twitter-perl_3.13007-1 fails to build:
Moose needs to be updated due
Package: bugs.debian.org
Severity: wishlist
It would be nice if forwarded mails (that is all regular mails to
submit@ or nn@) would include a signature with additional
information.
The signature should include
· a link to the bug report,
· indicate which (source) package the bug report
Hi,
I just saw a link [1] scroll by on #perl. It lists several
alternatives to LWP::Parallel::UserAgent, including one that might be a
drop-in solution (search for WWW::Curl::Simple).
Maybe it's easier to try those than fixing LWP::Parallel.
Regards,
Ansgar
[1]
Package: emacs23
Version: 23.2+1-4
Severity: wishlist
It would be nice if Emacs' `browse-url' function would use the x-www-browser
alternative and/or the browser selected in the desktop environment by default.
Right now it starts Iceweasel even though I selected chromium in both places
mentioned
Package: release.debian.org
Severity: normal
libdbd-oracle-perl (contrib) cannot migrate to testing[1] as the
dependency on oracle-instantclient11.2-basic cannot be satisfied: the
package is not in Debian's archive, cf. libdbd-oracle-perl's description
and README.Debian.
The Policy Manual states
+
+ * Handle changed URLs on vimeo.com. (Closes: #595486)
++ new patch: 595486-vimeo.patch
+ * debian/copyright: Refer to Debian systems instead of Debian GNU/Linux
+systems.
+
+ -- Ansgar Burchardt ans...@43-1.org Sat, 04 Sep 2010 22:08:24 +0900
+
clive (2.2.13-2) unstable; urgency=low
Julien Cristau jcris...@debian.org writes:
On Sat, Sep 4, 2010 at 22:34:39 +0900, Ansgar Burchardt wrote:
clive needs a small patch to handle changed URLs on vimeo.com[1].
I prepared an upload based on the version currently in unstable (which
is already unblocked).
Sounds like one
reassign 595467 libemail-address-perl 1.890-1
reassign 595351 libemail-address-perl 1.890-1
merge 595351 595467
retitle 595351 libemail-address-perl: changes in 1.890 break other packages
affects 595351 libdata-validate-email-perl
affects 595351 libregexp-common-email-address-perl
thanks
This is
Package: apt-listchanges
Version: 2.85.5
Severity: normal
Tags: upstream
When running apt-listchanges in an unknown locale, the following error is
displayed:
Traceback (most recent call last):
File /usr/bin/apt-listchanges, line 33, in module
from ALChacks import *
File
Package: puppet
Version: 2.6.2-1
Severity: important
After upgrading puppet from lenny to version 2.6.2-1~bpo50+1 (on a lenny
host) or 2.6.2-1 (on a squeeze host), the puppet client is no longer
happy with the server's certificate. Running puppet agent -t after
cleaning /var/lib/puppet/ssl gives
Hi,
attached is a patch that I use to prevent puppet from overwriting the
CA certificate if it is already present on the local host.
Regards,
Ansgar
Subject: Do not overwrite CA certificate
From: Ansgar Burchardt ans...@mathi.uni-heidelberg.de
Bug-Debian: http://bugs.debian.org/525850
Package: chromium-browser
Version: 6.0.472.63~r59945-2
Severity: important
Tags: upstream fixed-upstream
Forwarded: http://code.google.com/p/chromium/issues/detail?id=44606
Chromium fails to start if AFS is used for the home directory:
$ LC_ALL=C chromium-browser
Package: libpoe-component-pluggable-perl
Version: 1.26-1
Severity: important
Tags: sid
POE::Component::Pluggable was renamed to Object::Pluggable upstream.
The old package should be removed once libobject-pluggable-perl has
entered Debian and its reverse dependencies (currently only
Adam D. Barratt a...@adam-barratt.org.uk writes:
On Wed, 2010-10-13 at 23:24 +0200, Ansgar Burchardt wrote:
libapache-authenhook-perl logs passwords in Apache's error.log if the
log level is = info[1]. I prepared an update for Lenny including the
same patch used for testing/unstable (already
Package: subversion
Version: 1.6.12dfsg-2
Severity: wishlist
Tags: upstream
Running
svn update
will crate a .svn/lock file in every subdirectory. This slows down the
update quite noticeable for large repositories such as the pkg-perl
trunk [1]. It gets more annoying on encrypted disks as
Package: subversion
Version: 1.6.12dfsg-2
Severity: normal
The command svn cp . svn+ssh://... tries to copy a directory that has
just been removed and fails:
$ svn -m [svn-buildpackage] Tagging libhtml-tree-perl 4.1-1 \
cp .
brian m. carlson sand...@crustytoothpaste.net writes:
Chromium does not currently support Kerberos authentication via
GSS-Negotiate. This makes it significantly less useful for me than
Iceweasel, and so it would be nice if it did support that.
Chromium supports Negotiate Auth (and Kerberos)
found 603661 4:3.5.10-2
thanks
This bug affects stable as well.
Would it be possible to fix this bug in the upcoming stable point
release as well? I think proposed-updates will be closed in the near
future as the point release is planned for next weekend, so an upload
should be prepared soon.
Package: bzr-gtk
Version: 0.98.0+bzr692-1
Severity: normal
File: /usr/bin/bzr-handle-patch
bzr-handle-patch does not like some patches: when trying to open the
patch 03_use_login.icq.com.diff [1], only the error message
Error
Malformed patch header. No orig name
'diff -Nurwd
Package: www.debian.org
Severity: normal
packages.d.o does not display any information about packages in
lenny-backports-sloppy. For example, only the unstable version of
postgresql-9.0 shows up on http://packages.debian.org/postgresql-9.0.
On the other hand packages from lenny-backports are
severity 598464 wishlist
user pkg-perl-maintain...@lists.alioth.debian.org
usertags 598464 + post-squeeze
thanks
Max Kosmach m...@tcen.ru writes:
New Postgresql 9.0 change bytea_output default from 'escape' to 'hex'
and DBD:Pg doesn't support 'hex' encoding
Please add patch from upstream BTS
Package: gdisk
Version: 0.5.1-1
Severity: grave
Tags: upstream fixed-upstream
Several bugs have been closed in later releases:
- Fixed serious data corruption bug on big-endian (PowerPC and similar)
systems. [0.6.3]
- Fixed off-by-one bug in specification of partition when using the
-T
retitle 595491 unblock: clive/2.2.13-3
thanks
Philipp Kern pk...@debian.org writes:
On Sat, Sep 04, 2010 at 04:20:54PM +0200, Julien Cristau wrote:
Sounds like one of those packages that can't keep working for the
lifetime of a stable release. Should we ship this in stable at all?
(Same
===
--- debian/changelog (revision 63673)
+++ debian/changelog (working copy)
@@ -1,3 +1,9 @@
+libapache-authenhook-perl (2.00-04+pristine-1+lenny1) stable-security; urgency=high
+
+ * Remove passwords from log messages. (Closes: #599712)
+
+ -- Ansgar Burchardt ans
Moritz Muehlenhoff j...@inutil.org writes:
On Wed, Oct 13, 2010 at 04:30:26PM +0200, Ansgar Burchardt wrote:
libapache-authenhook-perl logs passwords in Apache's error.log if the
log level is = info[1]. I prepared an update for Lenny including the
same patch used for testing/unstable
) stable; urgency=high
+
+ * [CVE-2010-3845] Remove passwords from log messages. (Closes: #599712)
+
+ -- Ansgar Burchardt ans...@debian.org Wed, 13 Oct 2010 23:17:55 +0200
+
libapache-authenhook-perl (2.00-04+pristine-1) unstable; urgency=low
[ gregor herrmann ]
only in patch2:
unchanged
Guillaume Delacour g...@iroqwa.org writes:
First, I haven't managed to find a sponsor to upload versions since
0.5.1, this why the version in testing and unstable is quite far from
upstream.
That is unfortunate :-/
As the critical bug (at least) seems to be not very trivial to
backport,
/common-licenses/GPL-1.
+ * Bump Standards-Version to 3.9.1.
+ * Update my email address.
+
+ -- Ansgar Burchardt ans...@debian.org Sun, 17 Oct 2010 11:57:33 +0200
+
libdatetime-format-strptime-perl (1.3000-1) unstable; urgency=low
* New upstream release.
diff -Nru libdatetime-format-strptime
Package: release.debian.org
Severity: wishlist
User: release.debian@packages.debian.org
Usertags: unblock
Please consider unblocking libnet-twitter-perl. It now uses HTTPS
instead of HTTP for OAuth token negotiation as recommended by
Twitter[1] (that is s,http,https, for several URLs).
/control (.../3.13008-1) (revision 63851)
@@ -16,7 +16,7 @@
gregor herrmann gre...@debian.org, Franck Joncourt fra...@debian.org,
Antony Gelberg antony.gelb...@wayforth.com,
Ansgar Burchardt ans...@43-1.org
-Standards-Version: 3.9.0
+Standards-Version: 3.9.1
Homepage: http://search.cpan.org/dist
Package: lintian
Version: 2.2.10
Severity: minor
Hi,
several packages split the Vcs-* fields on two lines to avoid long
lines. Lintian should not complain in this case.
See [1] for examples: most of the packages with \n in the Vcs-* fields
are false positives.
Regards,
Ansgar
-- System
Package: libcatalyst-modules-perl
Version: 33
Severity: important
Hi,
the Catalyst::Plugin::Unicode module disappeared from the package in
the latest update.
Regards,
Ansgar
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500,
Hi,
Micah Anderson mi...@riseup.net writes:
* Ansgar Burchardt ans...@mathi.uni-heidelberg.de [2009-04-27 10:24-0400]:
When puppet initially requests a certificate from puppetmaster, it will
overwrite the CA certificate even if it is already present.
Do you mean to say that if you have
Hi,
isn't it a bit insecure to start puppet by default? If someone can
manipulate DNS replies, he should be able to take over the computer:
just respond to a DNS query for puppet with the address of a hostile
puppetmaster and let puppetd connect to it (please correct me if I am
wrong here). If
on python-support internals to find files,
+instead remove them earlier using the standard path (Closes: #516306).
+ * postinst: Set -e option.
+
+ -- Ansgar Burchardt ans...@43-1.org Mon, 09 Mar 2009 19:44:37 +0100
+
ldaptor (0.0.43-2) unstable; urgency=low
* QA upload.
diff -u ldaptor-0.0.43
Package: libenet-dev
Version: 1.2-1
Hi,
I'm forwarding a bug report I received by mail.
I probably won't be able to take a look at it before April.
Regards,
Ansgar
---BeginMessage---
Hello Ansgar (and Lee in CC),
I'm forwarding you blow snippet from a recent thread on ENet-discuss:
Hi,
Ilpo Järvinen\ [EMAIL PROTECTED] writes:
At least two crashy scenarios with powerline bridges found so far:
1) Build powerbridge towards non-aligned destination (ie., the
endpoint is sideways instead of pointing towards to other end
from where the building of the bridge starts)
I am not
package simutrans-pak64
tags 507304 + upstream
thanks
Hi,
Ilpo Järvinen\ [EMAIL PROTECTED] writes:
I couldn't find any road/train vehicle that was able to transport
concrete. IIRC, there were both present in some version which I
get earlier from upstream (before .deb era).
Several objects
Package: ketm
Version: 0.0.6-21
Severity: important
Hi,
I suggest removing ketm from Debian for the following reasons:
* no fun, unfinished. The README even says:
Status/Is it playable?
==
A bit, but not much fun yet. (No real levels, just a testbed for
Hi,
I'm also interested in TLS support for cyradm. I noticed that
upstream has applied a patch to enable STARTLS for Cyrus::IMAP and
cyradm. See [1] for an upstream bug report, relevant commits are (at
least) [2], [3], [4], [5].
Regards,
Ansgar
[1]
Package: liblocale-maketext-lexicon-perl
Version: 0.75-1
Severity: wishlist
Hi,
It would be nice to install xgettext.pl (currently provided in
examples/) in /usr/bin. It's only a simple wrapper script, but it has
several features the `xgettext' (from gettext) does not provide, e.g.
support for
Hi,
Damyan Ivanov d...@debian.org writes:
-=| Ansgar Burchardt, Thu, Dec 11, 2008 at 09:43:29PM +0100 |=-
It would be nice to install xgettext.pl (currently provided in
examples/) in /usr/bin. It's only a simple wrapper script, but it has
several features the `xgettext' (from gettext) does
Hi,
Damyan Ivanov d...@debian.org writes:
-=| Ansgar Burchardt, Fri, Dec 12, 2008 at 07:04:05PM +0100 |=-
Why not just keep the name xgettext.pl in this case? It is less
confusing than a completely different name. Also other documentation
(e.g. Catalyst::Plugin::I18N::Manual) refers
AD19
From 3b256e0e683a0a41dff71f0e00b4458ae40ef7e5 Mon Sep 17 00:00:00 2001
From: Ansgar Burchardt ansgar-gu...@alioth.debian.org
Date: Sat, 13 Dec 2008 14:33:50 +0100
Subject: [PATCH] exit fullscreen mode early to avoid crash
Jump'n'bump would crash when leaving the game from fullscreen mode
package jumpnbump
tags 487333 + patch upstream
thanks
Hi,
The attached patch makes Jump'n'bump handle the SDL quit event.
It is also available from the Git repository[1].
Regards,
Ansgar
[1] http://repo.or.cz/w/jumpnbump.git
--
PGP: 1024D/595FAD19 739E 2D09 0969 BEA9 9797 B055 DDB0 2FF7
Ansgar Burchardt ans...@2008.43-1.org writes:
The attached patch makes Jump'n'bump handle the SDL quit event.
This time I won't forget to attach it ;-)
Regards,
Ansgar
--
PGP: 1024D/595FAD19 739E 2D09 0969 BEA9 9797 B055 DDB0 2FF7 595F AD19
From f18a70c85ebce8842da18ac0333b4d6db8f8479f Mon
Package: libsdl1.2-dev
Version: 1.2.13-2
Severity: normal
Hi,
At least /usr/include/SDL/begin_code.h uses C++ style comments in some
places. This causes annoying compiler warnings:
gcc -W -Wall -pedantic `sdl-config --cflags` -c test.c
outputs 100 lines saying that C++ style comments are
package simutrans
severity 507307 important
tags 507307 + pending
thanks
Hi,
Ilpo Järvinen ilpo.jarvi...@helsinki.fi writes:
On Sun, 30 Nov 2008, Ansgar Burchardt wrote:
Ilpo Järvinen\ ilpo.jarvi...@helsinki.fi writes:
2) Building across square which has straight down/up elevation
(eg
Hi,
I cannot reproduce your problem here. Only the filename (without path) is
send here:
% perl -MHTTP::Request::Common -e print POST('http://127.0.0.1',
content_type = 'multipart/form-data', content = [ filecontent =
['/dev/null'] ])-as_string
POST http://127.0.0.1
Hi,
xboard works fine in my Lenny chroot.
Is /usr/games in your path? If not, you have to run
/usr/games/xboard -fcp /usr/games/gnuchess
Regards,
Ansgar
--
PGP: 1024D/595FAD19 739E 2D09 0969 BEA9 9797 B055 DDB0 2FF7 595F AD19
--
To UNSUBSCRIBE, email to
Hi,
Ramiro ramirosimoeslo...@gmail.com writes:
Version: 100.0+ds1-4
ii simutrans-pak64101.0-2
I can reproduce your problem with simutrans 100.0+ds1-4 and
simutrans-pak64 102.0-1, but it works fine with the same version of
simutrans and simutrans-pak64 installed. Can you please check
Package: pidgin
Version: 2.5.5-1
Severity: wishlist
Hi,
Pidgin does not allow to change the Resource name used by Jabber/XMPP
accounts later.
Select Accounts - ... (XMPP) - Edit and the Resource field is
disabled in the dialog window. It would be nice if this could be
changed after the initial
Package: request-tracker3.6
Version: 3.6.7-5
Severity: minor
File: /usr/share/request-tracker3.6/lib/RT/I18N/de.po
Tags: patch l10n
Hi,
I noticed two small problems with the German translation:
The permissions TakeTicket and StealTicket are *both* translated as
AnfrageÜbernehmen. I changed
Hi,
Piotr upite...@lycos.com writes:
The internet chess server is configured under gnome-chess settings.
If I start Applications- Games - Chess then it doesn't connect to
the internet chess server
Works here.
Did you select New - Servers - ... after starting gnome-chess?
Which server did you
severity 517453 important # Still usable to play against gnuchess
thanks
Hi,
cc cc upite...@lycos.com writes:
I tried to connect to: freechess.org or chessanytime.com and in the
connect program field I have telnet.
It seems to connecting, but I cannot write anything at the command
prompt.
Hi,
cc cc upite...@lycos.com writes:
If I start gnome-chess from a shell, connect to a chess server and try
to write something in a black window then it doesn't work.
The shell doesn't show any messages.
There should be an input field *below* the terminal window where you can
enter text. I
retitle 517453 gnome-chess: Cannot sent return to server
tags 517453 + pending
thanks
Hi,
gnome-chess does not allow to send an empty line to the server. As a
workaround, just enter something when the server asks you to press
return.
Regards,
Ansgar
--
PGP: 1024D/595FAD19 739E 2D09 0969
Hi,
Damyan Ivanov d...@debian.org writes:
That won't work with short DH7 debian/rules dh-make-perl uses
nowadays.
I guess putting MODULEBUILDRC=/dev/null in the environment before
firing dpkg-buildpackage is a better idea (provided that
dpkg-buildpackage doesn't sanitize the
Version: 1.6.11dfsg-1
Hi,
I can still reproduce this problem in the latest version.
If you run the attached script, you can see that SVN::Client opens ever
more connections without closing them again.
Regards,
Ansgar
#! /usr/bin/perl
use strict;
use warnings;
use SVN::Client;
my $url =
unarchive 495966
reopen 495966
notfixed 495966 0.8.1-1
thanks
Hi,
the patch was not applied in 0.8.1-1 [1] or any later revision. I tried
building openarena with the patch applied, but it does not work
correctly: there are missing textures (for example the ground in some
levels or the rocket
Package: wnpp
Severity: wishlist
Owner: Ansgar Burchardt ans...@43-1.org
* Package name: libmath-base36-perl
Version : 0.07
Upstream Author : Brian Cassidy bri...@cpan.org
* URL : http://search.cpan.org/dist/Math-Base36/
* License : Artistic or GPL-1
tags 585817 + moreinfo
thanks
Hi,
Vincent Lefevre vinc...@vinc17.net writes:
I've noticed that the atd daemon wasn't running (the at jobs
remained in the queue). I had to execute:
/etc/init.d/atd start
When does atd not start? At installation time or on boot?
Are the symlinks in
Package: libconfig-ini-mvp-perl
Version: 0.024-1
Severity: serious
Hi,
libconfig-ini-mvp-perl has been packaged as a dependency of
libdist-zilla-perl [1][2], but that part has moved to a separate package
(libconfig-mvp-reader-ini-perl). The reason to package it in the first
place is thus gone.
Package: sbuild
Version: 0.60.0-1
Severity: normal
Hi,
sbuild does not handle alternative dependencies that are also Provided
by another package correctly:
libcpan-meta-perl_2.101670-1 has a build-dependency on
libversion-perl (= 1:0.8200) | perl (= 5.12). libversion-perl is also
provided by
Roger Leigh rle...@codelibre.net writes:
On Fri, Jun 18, 2010 at 11:50:04AM +0900, Ansgar Burchardt wrote:
sbuild does not handle alternative dependencies that are also Provided
by another package correctly:
libcpan-meta-perl_2.101670-1 has a build-dependency on
libversion-perl (= 1:0.8200
Hi,
this bug was tagged as pending in April 2010, but no upload has happened
since. Is the problem really solved?
I plan to request removal from testing for maypole and its r-deps as it
currently keeps libclass-dbi-loader-relationship-perl in testing which
Debian has no license to distribute.
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: rm
Hi,
please remove maypole/1.2-5 and memories/2.11+2.111-2 from testing.
maypole depends on libclass-dbi-loader-relationship-perl [1] which can
therefore not be removed from testing. Note that
Hi,
Junichi Uekawa dan...@netfort.gr.jp writes:
severity 579028 wishlist
I don't agree with this as this bug allows arbitrary code execution as
root (see below).
Mehdi Dogguy wrote:
Can you please explain how this will break all existing configurations?
Does it mean that all people are
Package: debian-policy
Version: 3.9.0.0
Severity: minor
Hi,
perl/5.8.0-7 added /etc/perl to @INC:
* Prepend /etc/perl to @INC to provide a standard location for
configuration modules:
But this addition has never been documented in the Debian Perl Policy.
I suggest to add /etc/perl to the
Package: perl
Version: 5.10.1-13
Severity: grave
Tags: security
Hi,
perl includes the current directory as the last element in @INC when not
running in taint mode (-T). As many modules try to load other modules
that may or may not be installed, this can result in code execution.
Example:
Package: sbuild
Version: 0.60.0-1
Severity: important
Hi,
Sbuild::AptitudeBuildDepSatisfier always passes the option
Aptitude::CmdLine::Ignore-Trust-Violations=true to aptitude, allowing
the installation of unauthenticated packages. I think this should
depend on the $apt_allow_unauthenticated
Hi,
Ben Hutchings b...@decadent.org.uk writes:
Ben, you mentioned recently in the bug log that you were trying to
contact the original author of libclass-dbi-loader-relationship-perl;
have you had any luck with that?
Yes, we now have a proper licence for version 1.2 and I prepared a new
Package: libmoose-perl
Version: 1.06-1
Severity: serious
Justification: fails to build from source
The tests for libmoose-perl fail on ia64 since version 1.06. At first
glance none of the changes looks likely to have introduced this
regression:
The only change in 1.06 was a new feature:
[NEW
tags 588035 + patch
thanks
Roger Leigh rle...@codelibre.net writes:
On Sun, Jul 04, 2010 at 07:56:49PM +0900, Ansgar Burchardt wrote:
Sbuild::AptitudeBuildDepSatisfier always passes the option
Aptitude::CmdLine::Ignore-Trust-Violations=true to aptitude, allowing
the installation
b9241c2d724d68399eb0d4923e109b1be503068f Mon Sep 17 00:00:00 2001
From: Ansgar Burchardt ans...@43-1.org
Date: Mon, 5 Jul 2010 17:35:27 +0900
Subject: [PATCH] Do not try other alternatives if installing default version is enough
When we encounter
Build-Depends: pkg-a (= 2) | pkg-b (= 3)
and a lower version of pkg
tags 578259 - moreinfo
thanks
Hi,
Neil Williams codeh...@debian.org writes:
To be able to work on this bug, we need to know which package (and
version) generated this message.
Looking at the SVN commit logs, the problematic package should have been
libsvg-tt-graph-perl [1]. The 0.16
forcemerge 589052 589051
severity 589052 normal
retitle 589052 libfile-find-rule-perl-perl: avoid indirect build-dep on itself
thanks
Mounaam moun...@gmail.com writes:
Severity: serious
Justification: no longer builds from source
The package from unstable builds fine in unstable. It is not a
Package: xdg-utils
Version: 1.0.2+cvs20100307-1
Severity: normal
File: /usr/bin/xdg-email
Hi,
trying to send a mail via
xdg-email address
fails with an error from awk:
awk: line 15: regular expression compile failed (bad class -- [], [^] or [)
[...@a-za-z0-9.-\\
awk: line 15: syntax
Hi,
Mounaam moun...@gmail.com writes:
On 14/07/2010 18:03, Ansgar Burchardt wrote:
The package from unstable builds fine in unstable.
How is it possible if none of an older version of these packages is
already installed?
The older version is in unstable. Just how you need a C compiler
) UNRELEASED; urgency=low
+
+ * Get path for perl.h from perl's Config module. (Closes: #578631)
+
+ -- Ansgar Burchardt ans...@43-1.org Sat, 17 Jul 2010 14:42:52 +0900
+
nfqueue-bindings (0.3-1) unstable; urgency=low
* New upstream release
only in patch2:
unchanged:
--- nfqueue-bindings-0.3
tags 578633 + upstream fixed-upstream
thanks
Hi,
this issue was fixed upstream in the 0.44 release:
Release 0.44 - 9 May, 2010
--
* RPath information on link - Thanks to Jens Rehsack
* removed dependency on 'UNIVERSAL' as it is now built-in
(change for perl
Hi,
Steve Langasek vor...@debian.org writes:
I've been postponing dealing with this bug, hoping that someone in the
Debian Perl Group would spontaneously provide a better interface for this
than the current one. The perl-dbdabi-* virtual package seems sensible
enough, but I'm not happy
Hi,
pbuilder started to pass the --keyring option to debootstrap when
creating a chroot environment [1]. This means it is not possible to
create a Ubuntu chroot environment (on Debian) without either grabbing
the ubuntu-archive-keyring from somewhere by hand or telling pbuilder to
not pass the
Hi,
I just asked Florian about this bug and Moose-Policy is no longer
recommended and EOLed. The package should be removed from Debian once
liblatex-table-perl stops using it [1].
Regards,
Ansgar
[1] https://rt.cpan.org/Public/Bug/Display.html?id=59519
--
To UNSUBSCRIBE, email to
Package: libdbd-anydata-perl
Version: 0.09-2
Severity: serious
Tags: sid
Hi,
please update DBD::AnyData to version 0.110. Older versions will not
work with DBI-1.612 that is now in Debian.
Regards,
Ansgar
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject
401 - 500 of 2294 matches
Mail list logo
