Debug Log:
2013-05-21 01:30:14,976 (engine:925): Shutting down vm 'vpn1'
2013-05-21 01:30:14,982 (asyncjob:184): Creating async job for function
cb=
2013-05-21 01:30:19,154 (console:197): Shutting down tunnel PID=32160
OUTFD=19 ERRFD=21
2013-05-21 01:30:19,154 (console:197): Shutting down tunne
Control: tags 709141 + confirmed
Control: severity 709141 minor
On Tue, May 21, 2013 at 01:44:02PM +0800, Charlie Brown wrote:
Hello Charlie,
> Package: isatapd
> Version: 0.9.6-2
> Severity: normal
>
> Dear Maintainer,
> I use isatapd to get ipv6 working on my computer. It works well, but ever
Control: fixed -1 1.7.0-1
This is fixed (as far as it will be fixed upstream) in Facter 1.7.0 by
recommending virt-what, which seems to detect virtualization quite
reliably.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contac
Package: network-manager-openconnect
Version: 0.9.8.0-1
Severity: minor
My university offers IPv6 over AnyConnect/OpenConnect, but currently does
not signal split tunneling only for their prefix. Since I usually have
direct native IPv6 I often only want to route their prefix over the tunnel,
not
Package: whois
Version: 5.0.1
Severity: minor
If the bits 33-48 (the third block) are in compressed form whois does not
decode the embedded IPv4 address correctly.
be...@obelix:~$ whois 2002:81bb::1
Querying for the IPv4 endpoint 0.0.0.0 of a 6to4 IPv6 address.
No whois server is known for this
Package: ifupdown
Version: 0.7~alpha4
Severity: normal
Tags: experimental
ifdown executes 'ip addr flush dev $DEV', but does not set the link
layer to down using "ip link set eth0 down". This flushes the IPv6 link-local
address from the interface, which essentially disables all IPv6 on it until y
Package: ifupdown
Version: 0.7~alpha4
Severity: minor
Tags: experimental
When it hits an inet6 static stanza, ifup sets two sysctl variables
net.ipv6.conf.$DEV.accept_ra=0
net.ipv6.conf.$DEV.autoconf=0
The latter disables SLAAC using an EUI-64 MAC-based address on the interface,
which is probabl
Package: ifupdown
Version: 0.7~alpha4
Severity: minor
Tags: experimental
According to the documentation and my tests you can at the moment only set the
privext option (use_tempaddr) in an inet6 static stanza. This does not much
sense, as to my knowledge RFC3041 is only defined together with SLAAC
On 08.06.2011 22:31, Andrew O. Shadoura wrote:
Hello Andrew,
Package: ifupdown
Version: 0.7~alpha4
Severity: normal
Tags: experimental
ifdown executes 'ip addr flush dev $DEV', but does not set the link
layer to down using "ip link set eth0 down". This flushes the IPv6
link-local address from
Package: rsyslog
Version: 5.8.5-1
Severity: minor
Hi,
I'm not exactly sure where to put this. Might not even be a real bug,
feel free to close if you think so.
I have some tens of boxes that log to a remote host using relp
/etc/rsyslog.d# cat remote.conf
$ModLoad omrelp
$WorkDirectory /var/s
Am 28.07.2011 20:27, schrieb Alexander Wirt:
Bernhard Schmidt schrieb am Thursday, den 28. July 2011:
Package: amavisd-new
Version: 1:2.6.4-4
Severity: wishlist
There is a new version of amavisd-new available that fixes several problems.
Is anyone already working on an upload? I'd be wi
Package: puppetmaster
Version: 2.7.3-1
Severity: minor
Tags: upstream patch
After upgrading from 2.7.1-1 to 2.7.3-1, puppet(master) sends a tagmail
report even if no changes have been applied to the system (it only contains
Tue Aug 30 15:23:29 +0200 2011 Puppet (notice): Finished catalog run in 1
On 07.09.2011 11:32, Alexander Wirt wrote:
Package: amavisd-new
Version: 1:2.6.4-4
Severity: wishlist
There is a new version of amavisd-new available that fixes several problems.
Is anyone already working on an upload? I'd be willing to put some work into
it.
See the packaging mailinglist. I s
Just out of curiosity, what is delaying the packaging of new systemd
versions? Is there anything we can do to help?
I'd like to try systemd in a few environments, but I'm guessing there
won't be much support from upstream for that version.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ..
tags #470496 wontfix
thanks
after the update to version 1.0.6 I do not see certain grahps anymore.
E.g. the Interface statistics for hosts are not shown anymore.
Instead, I see line like the following in the log:
[11-Mar-2008 16:40:11*] Datasource exists in RRD file, but it is not
updated: ifInO
On 20.09.2011 21:07, Joey Hess wrote:
Note that those who experience this situation can get out by
pressing ctrl-c, and then run something like:
apt-get -o Immediate-Configure=false -f install
Doesn't work here.
root@torrustest:~# apt-get -o Immediate-Configure=false -f install
Reading packag
Hi Jörg,
I'm currently working on packaging a new version of Torrus into Debian.
I've tried the BDB Upgrade script Marc Haber wrote with your assistance,
but it does not work (at least not for the upgrade squeeze->wheezy (4.8
-> 5.1).
The script Marc originally wrote included the flags
DB_C
On 25.09.2011 13:57, Joerg Dorchain wrote:
On Sun, Sep 25, 2011 at 01:03:02PM +0200, Bernhard Schmidt wrote:
Debian. I've tried the BDB Upgrade script Marc Haber wrote with your
assistance, but it does not work (at least not for the upgrade
squeeze->wheezy (4.8 -> 5.1).
[...]
Sin
Any Update? I'd love to see 9.8 for DNS64 support.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Control: tag 715365 + patch
Control: fixed 715365 2.07-1
On Mon, Jul 08, 2013 at 01:53:45PM +0200, Andre Beck wrote:
Hello Andre,
thanks for your detailled bugreport...
> please backport Commit 5985de2ace378ff8179ab9229470bd321728d061 (Bugfix
> in walkSnmpTable(): maxrepetitions is only applica
Package: steam
Version: 1.0.0.39-1
Followup-For: Bug #712017
Same problem here, this is the output I get on stdout/stderr when it crashes
[0712/002025:ERROR:reference_audio_renderer.cc(46)] Not implemented reached in
virtual void
media::ReferenceAudioRenderer::OnCreated(media::AudioOutputContro
Am 09.07.2013 00:07, schrieb Bernhard Schmidt:
Hello Andre,
please backport Commit 5985de2ace378ff8179ab9229470bd321728d061 (Bugfix
in walkSnmpTable(): maxrepetitions is only applicable in SNMPv2 or v3) and
Commit 2f468f3e0aef02657b066baa98504dc98e841888 (Bugfix in collector:
maxrepetitions is
Package: remmina
Version: 1.0.0-6
Followup-For: Bug #690756
Hello,
I occasionally see the same problem (solid black or white screen after
connecting), but it always clears up for me when I briefly switch
to full-screen mode (Control_R+F) and back.
Can you confirm that?
Bernhard
--
To UNSUBS
tches/20_walksnmptable_snmpv1.patch:
+ upstream commit 5985de2ace378ff8179ab9229470bd321728d061
+ (Bugfix in walkSnmpTable(): maxrepetitions is only applicable in
+ SNMPv2 or v3)
+Thanks to Andre Beck for identifying and testing the necessary commits.
+
+ -- Bernhard Schmidt Sat, 13 Jul 2013 21:
Package: torrus-common
Followup-For: Bug #715365
Control: block 715365 by 717004
I have submitted a pu request for this, marking the bug accordingly.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.
Package: src:linux
Followup-For: Bug #714929
Some more information.
- It still happens with 3.10-1-amd64 (3.10.1-1) from sid
- Workaround is (next to blacklisting) setting vmwgfx.enable_fbdev=1
on the kernel commandline, which is probably the same as setting the
kernel config option CONFIG_D
On Thu, Jul 25, 2013 at 08:20:54PM +0100, Adam D. Barratt wrote:
> On Tue, 2013-07-16 at 00:34 +0200, Bernhard Schmidt wrote:
> > Andre Beck discovered in Bug#715365 that the torrus version shipped with
> > Wheezy (2.03) has some problems with SNMPv1-only targets. He identified
&
Package: lldpd
Version: 0.7.6-2
Severity: minor
systemd 204 (currently in jessie/unstable) ignores part of the .service
file
[3.667599] systemd[1]: [/lib/systemd/system/lldpd.service:10]
Executable path is not absolute, ignoring: mkdir -p /var/run/lldpd/etc
[3.667668] systemd[1]: [/lib/sy
fixed 635824 0.85-1
thanks
https://github.com/traviscross/mtr/commit/bc39728995df74dd0ab78feea9a8ecfc53579fce
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
fixed 164119 0.85-1
thanks
https://github.com/traviscross/mtr/commit/2cf22b240958b72fb8d84f3ee663f84cbad2c65b
Add TCP (SYN) support
Instead of sending ICMP ECHO or UDP packets, this mode opens a TCP
connection to the port of choice (80 by default) and sets IP_TTL
or IPV6_UNICAST_HOPS to control
fixed 472509 0.75-1
thanks
UDP-Support has been included starting in mtr 0.74
v0.74 Martin Pels' patch to allow UDP probes.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
fixed 24748 0.29-1
thanks
Judging from my experience and looking at the code I'd say this has been
fixed a long time ago. Most likely with version 0.29
- Adjusted "not too much at once" algorithm. Now probing continues as
long as not more than 5 hosts are unknown. Returning packets
usuall
Package: amavisd-new
Version: 1:2.6.4-4
Severity: wishlist
There is a new version of amavisd-new available that fixes several problems.
Is anyone already working on an upload? I'd be willing to put some work into
it.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT p
Package: systemd
Version: 29-1
Severity: minor
Tags: sid
Hi,
I have a weird issue with systemd I cannot quite grasp. I think this is a bug,
but maybe someone more experienced can shed some light on it.
My new Mailserver-to-be is a KVM VM (on a Squeeze host), that has been installed
as a minimal
Hi,
any progress here? Updating spamassassin would most likely fix #626191,
#630327, #615590 and #626751.
Bernhard
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: check-mk
Severity: wishlist
Dear Maintainer,
A new version of check-mk is available at the upstream author.
I would take a stab at updating the package and submitting patches if wanted,
but your last comment in Bug #639225 suggests that you have already started
working on a new version
Package: aptitude
Version: 0.6.4-1.2
Severity: normal
Dear Maintainer,
I already asked for this on the debian-users mailinglist and got replies from
people
having the same issue
http://permalink.gmane.org/gmane.linux.debian.user/421736
I have a weird problem where my google foo is failing me (
Package: systemd
Version: 37-1
Severity: normal
Tags: patch
Bash autocompletion for at least the reload and stop action is broken, because
__get_active_units is getting confused by the legend added by systemctl. The
attached
patch fixes this by supplying the --no-legend argument for all __get_*_u
This is configurable since RANCID 2.3.2 with the ACLSORT knob
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
FYI, this has been fixed slightly differently in upstream commit
8aea83c718af18e6436e6bdce9437238de052dbb.
http://cgit.freedesktop.org/systemd/commit/?id=8aea83c718af18e6436e6bdce9437238de052dbb
Bernhard
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of
forwarded 654853 https://support.process-one.net/browse/EJAB-1529
retitle 654853 ejabberd: libpurple-based implementations cannot
authorize with DIGEST-MD5
tags 654853 + patch upstream
thanks
This issue is described in
https://support.process-one.net/browse/EJAB-1529. A patch by one of the
up
retitle 654853 ejabberd: libpurple-based implementations cannot authorize with
DIGEST-MD5
thanks
Applied the patch to 2.1.10-2 and built the package, it is confirmed to
fix the issue. However, I had to manually set the fqdn in the config
file here to the name listed in the SRV record, which is no
Package: pnp4nagios-web
Version: 0.6.16-1
Severity: important
After upgrading to PHP 5.4 (current wheezy) pnp4nagios displays an
empty page for all URLs I can think of. There is nothing in the error
log or any other logs I could think of, despite of having all
error_reporting categories enabled.
Hi Ross,
there are several bugs open for a while in your openconnect package
without any progress recently. In Bug #626976 you mentioned that you do
not have time for packaging at the moment.
I would be willing to give it a try to convert the openconnect package
to a current upstream version
Package: conserver-server
Version: 8.1.18-1
Severity: normal
Dear Maintainer,
the initscript of conserver-server does not include and use the
lsb-init functions and thus command redirection for systemd fails.
Additionally the init script does not implement the status command
(which is 3 lines
Please find attached the patch. I changed two indentation errors as well
and introduced a new PIDFILE variable.
Best Regards,
Bernhard
diff --git a/debian/conserver-server.init b/debian/conserver-server.init
index bb3cb05..1f8d702 100644
--- a/debian/conserver-server.init
+++ b/debian/conserver-se
Package: lvm2
Version: 2.02.95-3
Severity: normal
Tags: patch
LVM supports the dm-thin thin provisioning target starting in vesion 2.02.89,
but it needs
to be enabled at compile time. Please add --with-thin=internal
Before:
root@svr03:~# lvcreate -i 1 -I 64 -c 256 -L100M -T raid1/pool -V 1T --
This happens here too. Interestingly, it happens when I connect to an
IPv6 host I have not spoken to before and it has the effect of adding a
/128 route.
This could be https://bugzilla.gnome.org/show_bug.cgi?id=671767
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with
Hello Benoit,
can you reenable IPv6 and check whether you see a lot of static IPv6
routes in your routing table (ip -6 route)? This might be
related/duplicate to
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670820 if you have a
lot of IPv6 peers (i.e. Bittorrent)
Thanks,
Bernhard
--
On 09.04.2012 22:07, Michael Biebl wrote:
Hello Michael,
After upgrading from 37-1.1, many commands fail with error codes 143 or
129 under sudo, including "sudo bash" or "sudo passwd root", meaning
that the problem cannot easily be rectified or circumvented if root
logins are disabled. Hence,
Package: systemd
Version: 44-1
Severity: normal
This seems to be somewhat new behaviour, I have several boxes with
systemd-37.1 that don't show this behaviour.
root@mail:~# /etc/init.d/ssh restart
Restarting ssh (via systemctl): ssh.serviceConnection to mail.svr03.mucip.net
closed by remote hos
Any news here? I would also love to see a ~bpo60 version of Dovecot 2.0.
Please tell me if I can aid in any testing.
Regards,
Bernhard
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Unfortunately this bug is not completely fixed, you recommend
smartmontools but you are not installing the plugin yet.
root@svr03:~# dpkg -L check-mk-agent | grep smart
Should be installed in /usr/lib/check_mk_agent/plugins/ (see the
check-mk-agent.install patch in this bug)
--
To UNSUBSCR
Package: puppetmaster-passenger
Version: 2.7.13-1
Severity: important
Minimal squeeze installation, upgraded to wheezy then installed
puppetmaster-passenger
fails in the postinst stage
root@puppet:~# dpkg --configure -a
Setting up puppetmaster-passenger (2.7.13-1) ...
Module ssl already enabled
Package: systemd
Version: 44-2
Severity: minor
Dear Maintainer,
I think this is just a cosmetic bug. I'm not sure from reading LSB
whether "+" is allowed in LSB headers or not. If it's not, feel free to
reassign to the package tacacs_plus.
After installing tacacs_plus the following message a
The erroneous detection as "xenu" is fixed in facter 1.6.2-1. See commit
https://github.com/puppetlabs/facter/commit/16a8cabba91b7737dfe33227e7f155738a50d60b
.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@li
Package: facter
Version: 1.6.2-1
Severity: normal
Tags: upstream
Since upgrading facter from 1.6.1-1 to 1.6.2-1 my KVM guest (running
Wheezy, host is Wheezy qemu-kvm with libvirt) does not detect the
state correctly anymore. It shows the VM being a physical system.
The broken detection of KVM
Best Regards,
Bernhard
> reassign 665197 libkohana2-php 2.3.4-1
> thanks
>
> Hi,
>
> On Thu, Mar 22, 2012 at 03:10:25PM +, Bernhard Schmidt wrote:
>> After upgrading to PHP 5.4 (current wheezy) pnp4nagios displays an
>> empty page for all URLs I can think of. T
Package: libpam-systemd
Version: 44-1
Severity: important
After upgrading from 43-1 (experimental) to 44-1 sudo does not work
anymore. It exits immediately with RC=143. There is nothing usable
in the logs.
berni@schleppi:~$ sudo -s
berni@schleppi:~$ sudo su -
berni@schleppi:~$ echo $?
143
Remov
Package: virt-viewer
Version: 0.5.1-1
Severity: wishlist
Please compile virt-viewer with Spice support. Adding
libspice-client-gtk-3.0-dev to the build dependencies
seems to be enough to do so.
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'
Package: nslcd
Version: 0.9.4-3
Severity: normal
Hi,
we deploy all our servers with a configuration like this:
uri ldap://127.0.0.1
uri ldaps://ldap1.domain.de/
uri ldaps://ldap2.domain.de/
usually there is no local LDAP daemon running, so it will just fail over
to ldap1, but for important syst
Control: notfound 796184 4:5.3.2-1
Control: found 796184 4:5.3.2-2
On Thu, Aug 20, 2015 at 08:06:21AM +, Franz Schrober wrote:
Hi,
> Can confirm that. The workaround is to download
> libkdecorations2-5_5.3.2-1_*deb and
> libkdecorations2private5_5.3.2-1_*.deb from
> http://snapshot.debian.or
Control: affects 796184 + kwin-x11
I don't see the bug listed in the kwin BTS despite the affects. Possibly
because the kwin binary package doesn't exist. Marking kwin-x11 as
affected as well.
On Sun, Nov 06, 2016 at 04:39:03PM +0400, Stepan Golosunov wrote:
Hi,
> 06.11.2016 в 16:18:32 +0400 Stepan Golosunov написал:
> > 03.11.2016 в 09:24:19 +0100 Bernhard Schmidt написал(а):
> > > - Asterisk is doing some weird stuff with macros in
> > >
> >
On Fri, Nov 04, 2016 at 11:02:03AM +0100, Bernhard Schmidt wrote:
Hi,
> > I decided to try this: I made a sid chroot, manually downgraded to
> > libssl-dev 1.0.2j-1 from stretch, and built asterisk from the
> > current packaging git head (ec0143a). I actually enabled
On Fri, Feb 26, 2016 at 10:31:43PM +0100, Moritz Muehlenhoff wrote:
Hi Moritz,
> Source: asterisk
> Severity: serious
>
> asterisk hasn't seen a maintainer upload to unstable in 2015. It's
> already excluded from testing due to an unrelated FTBFS bug. This
> bug is used to ensure that it doesn't
On Wed, Nov 09, 2016 at 08:47:42PM -0500, Gedalya wrote:
Hi,
> OK, confirmed.
> The patch (r5401) works, we're back with the previous behavior:
>
> [Nov 9 20:43:33] ERROR[14871]: res_pjsip.c:2883 ast_sip_create_dialog_uac:
> Could not create dialog to endpoint '' as URI '' is not valid
On Sat, Nov 12, 2016 at 10:51:32PM +0100, Andrey Gursky wrote:
> > For the record, pjproject is currently used by a single other package:
> > asterisk. Upstream of asterisk recommends applying a set of their own
> > patches:
> >
> > http://git.asterisk.org/gitweb/?p=asterisk/asterisk.git;a=tree;f
On 04.05.2017 22:47, Kurt Roeckx wrote:
Hi Kurt,
>>> I was checking 1:4.2.8p10+dfsg-1 that should have fixed this.
>>
>> No, 1:4.2.8p10+dfsg-1+exp1 (in experimental) should have fixed this, it
>> has not landed in sid yet (due to being in deep freeze etc)
>>>
>>> But still:
>>> # apt-get install
t in ntpdate-debian (Closes: #854432, #823120)
+ * Point Vcs-* to pkg-ntp git repository
+ * Add Bernhard Schmidt to Uploaders
+
+ -- Bernhard Schmidt Sun, 07 May 2017 14:49:22 +0200
+
ntp (1:4.2.8p10+dfsg-1) unstable; urgency=high
* New upstream version
diff -Nru ntp-4.2.8p10+dfsg/debian/con
On Sat, Apr 15, 2017 at 11:42:37PM +0200, Marcus Jodorf wrote:
Hi,
is there anything I can do to get this fixed for Stretch? I can
pretty reliably reproduce this issue with all my upgraded Stretch
systems, neither of them can send mails after a reboot until Postfix is
getting restarted
An After=
On Thu, Dec 15, 2016 at 11:18:47AM +, Thomas Hood wrote:
Hi Thomas,
> package resolvconf
> tags 847440 pending
> stop
You set this to Pending almost five months ago, do you still plan to
apply this for Stretch?
Bernhard
signature.asc
Description: Digital signature
Control: tags -1 - moreinfo
Hi,
> Bernhard Schmidt:
>> Package: release.debian.org
>> Severity: normal
>> User: release.debian@packages.debian.org
>> Usertags: unblock
>>
>> Hi,
>>
>> I'd like to ask for a pre-approval to uplo
Am 08.05.2017 um 05:59 schrieb Scott Kitterman:
> On Sunday, May 07, 2017 10:55:58 PM Bernhard Schmidt wrote:
>> On Sat, Apr 15, 2017 at 11:42:37PM +0200, Marcus Jodorf wrote:
>>
>> Hi,
>>
>> is there anything I can do to get this fixed for Stretch? I can
>&g
Am 08.05.2017 um 16:18 schrieb Michael Biebl:
Hi,
> I'm missing context here. Can you go into more detail please? What exactly is
> the question here?
Sorry.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=854475 is about
several issues with postfix being started before the network is up,
f
Hi Andreas,
Am 08.05.2017 um 19:15 schrieb Andreas Henriksson:
> Hello Scott, Bernhard,
>
> On Sun, May 07, 2017 at 11:59:10PM -0400, Scott Kitterman wrote:
>> On Sunday, May 07, 2017 10:55:58 PM Bernhard Schmidt wrote:
>>> [...]
>> postfix.service has After=n
Am 08.05.2017 um 20:54 schrieb Scott Kitterman:
Hi Scott,
> In the postinst, if the debconf configuration is something other than none or
> local, we create an override file with After=network-online.target, which is
> what I think is needed in most of these cases. I did not add it to the
>
On Mon, May 08, 2017 at 10:11:45PM +0200, Andreas Henriksson wrote:
Hi,
> I think it's much better to implement this logic natively in the daemon,
> so please see attached patch. Please note that it's gotten basically no
> testing at all, so review carefully.
I really have to admit that patching
Am 10.05.2017 um 17:46 schrieb Scott Kitterman:
Hi Scott,
>> I think network-online.target is unnecessary, as I'm not aware of any
>> common postfix configurations that actually need network access to
>> startup. At least the common case of postfix or SQL the connection is
>
> If you specify an
Control: fixed -1 1:4.2.8p10+dfsg-1
Fixed somewhere in 4.2.8, at least the current Stretch version is not
affected.
signature.asc
Description: Digital signature
On Tue, Nov 29, 2016 at 06:01:50AM -0500, Charles (Chas) Williams wrote:
Hi,
> Package: ntp
> Version: 1:4.2.8p9+dfsg-2
>
> ruby is used by ntp when running unit tests during its build
> process. ruby should be listed as a build dependency in
> debian/control
Hrm, the unit test (make check) fa
Control: tag -1 + confirmed
On Wed, Jan 11, 2017 at 06:23:58PM -0500, Anthony DeRobertis wrote:
> Package: ntp
> Version: 1:4.2.8p9+dfsg-2
> Severity: normal
> File: /usr/bin/update-leap
>
> It seems update-leap is just broken, with the default options, because
> it attempts to use File::Fetch t
Control: tags -1 + moreinfo unreproducible
On Mon, Jun 01, 2015 at 09:16:05AM +0100, Klaus Ethgen wrote:
> This is a successor of bug #571469. All is said there. NTP needs running
> DNS when it starts. Please add $named to Required-Start in init script.
>
> Funny thing, reportbug does include my
On Mon, Apr 03, 2017 at 11:15:35PM +0200, Kurt Roeckx wrote:
HI,
> > I tried to reproduce this with current Jessie and the future Stretch
> > release. As far as I can tell ntp handles this situation just fine.
> >
> > When ntpd starts up and cannot resolve the servers it logs
> >
> > ntpd[...]:
isc6-1.0.1/debian/changelog ndisc6-1.0.1/debian/changelog
--- ndisc6-1.0.1/debian/changelog
+++ ndisc6-1.0.1/debian/changelog
@@ -1,3 +1,10 @@
+ndisc6 (1.0.1-1+deb8u1) jessie; urgency=medium
+
+ * Use upstream default merge hook when resolvconf is not available
+(Closes: #767071)
+
+ -- Bernha
Package: src:asterisk
Version: 1:13.0.0~dfsg-1
Severity: important
Tags: security patch upstream
See http://downloads.asterisk.org/pub/security/AST-2017-001.html
Asterisk Project Security Advisory - AST-2017-001
ProductAsterisk
Package: asterisk
Version: 1:13.14.0~dfsg-1
Severity: important
On systems with several IP addresses (i.e. clusters or multihomed servers)
the RTP media stream often uses another source IP address than the transport
used.
This should be fixable with the following upstream commits in 13.15.0
201
s with the release-team
I'm willing to do this on your behalf.
Bernhard
From bc6025525e37ffa82aad19840df3b915324506a6 Mon Sep 17 00:00:00 2001
From: Bernhard Schmidt
Date: Wed, 15 Mar 2017 21:29:53 +0100
Subject: [PATCH] Fix SIGSEGV selecting a GPG key
Import patch from http://dev.mutt.org/hg/mutt/rev/5a86319adad0 asa
On Wed, Mar 15, 2017 at 10:48:17PM +, Antonio Radici wrote:
Hi Antonio,
> the patch looks fine to me. if the bug is bumped to grave (and there are
> reasons
> to do so); I have done point updates in the past and it is straightforward, if
> you have already opened the bug / done the upload th
Control: tag -1 - moreinfo
On Sun, Feb 26, 2017 at 05:14:45PM +, Jonathan Wiltshire wrote:
Hi,
> Control: tag -1 confirmed moreinfo
>
> On Wed, Feb 15, 2017 at 04:22:43PM +0100, Bernhard Schmidt wrote:
> > I would like to request permission to update Asterisk in S
Package: release.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertags: unblock
Hi,
I would like to request permission to update Asterisk in Stretch to a new
upstream release (13.13.2 to 13.14.0). This version has mostly bugfixes
but only very minor new features.
Unf
On 14.02.2017 00:43, Pierre Ynard wrote:
Hi,
>> in finish-install /e/n/i will never be properly populated for a wireless
>> installation without network-manager, although I think ifupdown would be
>> capable to do this (not tested, but have a look at
>> https://anonscm.debian.org/cgit/d-i/netcfg.
On Thu, Feb 16, 2017 at 11:48:49PM +0100, Kurt Roeckx wrote:
Hi Kurt,
> I could really use some help with the ntp (network time protocol)
> package. There have been various bugs filed, and I didn't have the
> time to properly look at them and deal with them.
>
> It's currently team maintained, b
Package: src:ifupdown2
Version: 1.0~git20170114-1
Severity: important
Dear Maintainer,
it seems that ifupdown2 allow-hotplug keyword works significantly
different from ifupdown allow-hotplug.
In ifupdown, when a new network device appears, a udev trigger fires
where ifquery checks whether there
Control: block 853792 by 855214
On Sun, Feb 19, 2017 at 07:42:54PM +1300, Grzegorz Ojrzanowski wrote:
Hi,
> On Tue, 14 Feb 2017 23:13:17 +0100 Bernhard Schmidt
> wrote:
> > Could you please try 13.14.0 from experimental? You might need to enable
> > sid to install it (th
On 21.02.2017 21:03, Kurt Roeckx wrote:
Hi,
> On Tue, Feb 21, 2017 at 02:10:09PM -0500, Peter Eisentraut wrote:
>> On 2/19/17 07:01, Kurt Roeckx wrote:
> I could really use some help with the ntp (network time protocol)
> package. There have been various bugs filed, and I didn't have the
On 23.02.2017 19:06, Kurt Roeckx wrote:
> On Thu, Feb 23, 2017 at 01:33:09PM +0100, Bernhard Schmidt wrote:
>>
>> Will check what could be causing this.
>
> That has been fixed in an NMU, see #851803
Ah right, silly me.
I've imported the NMU and added the missing t
On 26.04.2017 13:37, Andrew Shadura wrote:
Hi Andrew,
> Source: portaudio19
> Version: 19+svn20140130-1
> Severity: important
> Control: found -1 19.6.0-1
>
> Dear Maintainer,
>
> Since portaudio19 package uses autoreconf, it should build-depend on
> pkg-config package. Without that dependency,
On Fri, Apr 28, 2017 at 05:45:17PM +0100, Adam D. Barratt wrote:
Hi Adam,
> On Tue, 2017-04-04 at 00:40 +0200, Bernhard Schmidt wrote:
> > the package rdnssd (from src:ndisc6) provides a daemon that listens to IPv6
> > RA
> > messages containing RDNSS (recursive DNS serv
On Wed, May 03, 2017 at 09:51:27AM +0200, Christian Ehrhardt wrote:
Hi,
> I was checking 1:4.2.8p10+dfsg-1 that should have fixed this.
No, 1:4.2.8p10+dfsg-1+exp1 (in experimental) should have fixed this, it
has not landed in sid yet (due to being in deep freeze etc)
>
> But still:
> # apt-get
101 - 200 of 965 matches
Mail list logo