Bug#419475: linux-image-2.6.18-4-k7: erroneous behaviour of Realtek 8139, network practically unusable
Package: linux-image-2.6.18-4-k7 Version: 2.6.18.dfsg.1-12 Severity: important After upgrading this machine from sarge to etch, network card started to do strange things. Net card is correctly detected and initialized, but it doesn't works as expected. I can, for example, remotely connect by ssh to machine. But when I try to scp something, connection times out. I can open www.google.com, but not www.yahoo.com (I suppose problem is the size of data to transfer). Even an apt-get upgrade times out after downloading some headers. I have tried to downgrade kernel (vanilla kernel, without debian patches, but with the same options as 2.6.18-4 debian kernel when possible), and the problem seems to appear in 2.6.17. 2.6.16.46 works with no problem. 2.6.17 suffers from the same problem than etch's kernel. I have tried 2.6.18-4-486 too, and the problem persists. I have passed the following options to kernel, with no success at all: irqpoll pci=biosirq pci=routeirq acpi=off I've added the following lines to /etc/sysctl.conf, with no success too (I found them in an old kernel bug report): # No longer needed, fixed by lines below #net.ipv4.tcp_window_scaling=0 # Fix for tcp window scaling issue related to broken Internet routers proc.sys.net.ipv4.tcp_wmem=4096 16384 131072 proc.sys.net.ipv4.tcp_rmem=4096 87380 174760 # Default Debian values for these, still causing problems as of 2.6.18-3 #proc.sys.net.ipv4.tcp_wmem=409616384 4194304 #proc.sys.net.ipv4.tcp_rmem=409687380 4194304 I'm at my very end. This is the output of lspci for both cards (mainboard internal, and PCI): 01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Flags: bus master, medium devsel, latency 32, IRQ 201 I/O ports at 8400 [size=256] Memory at e600 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Giga-byte Technology GA-7VM400M/7VT600 Motherboard Flags: bus master, medium devsel, latency 32, IRQ 193 I/O ports at 8800 [size=256] Memory at e6001000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Mainboard is a Gigabyte 7N400SL, with the latest BIOS installed. Please, feel free to query any other information needed. P.S. I have booted with 2.6.16.46-1-k7, because with debian's kernel I cannot send this report :) -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16.46-1-k7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages linux-image-2.6.18-4-k7 depends on: ii coreutils 5.97-5.3 The GNU core utilities ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy ii initramfs-tools [linux-initra 0.85g tools for generating an initramfs ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.18-4-k7 recommends: ii libc6-i686 2.3.6.ds1-13 GNU C Library: Shared libraries [i -- debconf-show failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#490308: iceweasel: Iceweasel 3 hangs up when socksified by dante.
Package: iceweasel Version: 3.0~rc2-2 Severity: important After upgrading from iceweasel 2 to iceweasel 3, iceweasel hangs up before starting when socksified by dante. dante-client 1.1.18.dfsg-0.2 In my company, we use a socks proxy for accessing two networks where client's machines resides. All the other traffic must go outside the proxy server, so I cannot configure socks proxy inside iceweasel. It worked perfectly with iceweasel 2.x. It's after upgrading to testing's iceweasel 3 when it stopped starting. This is the otput og iceweasel -g: $ iceweasel -g GNU gdb 6.7.1-debian Copyright (C) 2007 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type show copying and show warranty for details. This GDB was configured as i486-linux-gnu... (no debugging symbols found) Using host libthread_db library /lib/i686/cmov/libthread_db.so.1. (gdb) set pagination off (gdb) (gdb) run Starting program: /usr/lib/iceweasel/firefox-bin -a firefox (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) Program received signal SIGINT, Interrupt. 0xe410 in __kernel_vsyscall () (gdb) bt full #0 0xe410 in __kernel_vsyscall () No symbol table info available. #1 0xb7cf5589 in ?? () from /lib/i686/cmov/libc.so.6 No symbol table info available. #2 0x000c in ?? () No symbol table info available. #3 0xb7cfdff4 in fpathconf () from /lib/i686/cmov/libc.so.6 No symbol table info available. #4 0xb7de4dc6 in ?? () from /usr/lib/libstdc++.so.6 No symbol table info available. #5 0xb7f974e4 in ?? () No symbol table info available. #6 0xb7f97458 in ?? () No symbol table info available. #7 0xbff70b5c in ?? () No symbol table info available. #8 0xb7f924ab in ?? () No symbol table info available. #9 0xb7f974e4 in ?? () No symbol table info available. #10 0x in ?? () No symbol table info available. But I have to say that bt output is different every time I run it. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages iceweasel depends on: ii debianutils 2.28.4 Miscellaneous utilities specific t ii fontconfig2.6.0-1generic font configuration library ii libc6 2.7-10 GNU C Library: Shared libraries ii libgcc1 1:4.3.1-2 GCC support library ii libglib2.0-0 2.16.3-2 The GLib library of C routines ii libgtk2.0-0 2.12.10-2 The GTK+ graphical user interface ii libnspr4-0d 4.7.1-3NetScape Portable Runtime Library ii libstdc++64.3.1-2The GNU Standard C++ Library v3 ii procps1:3.2.7-8 /proc file system utilities ii psmisc22.6-1 Utilities that use the proc filesy ii xulrunner-1.9 1.9~rc2-5 XUL + XPCOM application runner iceweasel recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#490808: kmail: Misinterpreted encoding of from field on message list
Package: kmail Version: 4:3.5.9-4 Severity: important Since kmail 3.5.9-4, on sender field in message list, international characters are misinterpreted. For example, where before I saw Bermúdez now I see =?iso-8859-1?Q?Berm=FAdez When encoded in any international codepage, sender field is totally unreadeable. It doesn't depend on language you have selected on KDE. It fails in spanish (my own language) as well as in english. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kmail depends on: ii kdebase-kio-plugins 4:3.5.9.dfsg.1-2+b1 core I/O slaves for KDE ii kdelibs4c2a 4:3.5.9.dfsg.1-4core libraries and binaries for al ii kdepim-kio-plugins 4:3.5.9-4 KDE pim I/O Slaves ii libart-2.0-2 2.3.20-2Library of functions for 2D graphi ii libaudio21.9.1-4 Network Audio System - shared libr ii libc62.7-10 GNU C Library: Shared libraries ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.6-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.3.1-2 GCC support library ii libice6 2:1.0.4-1 X11 Inter-Client Exchange library ii libidn11 1.8+20080606-1 GNU libidn library, implementation ii libjpeg626b-14 The Independent JPEG Group's JPEG ii libkcal2b4:3.5.9-4 KDE calendaring library ii libkdepim1a 4:3.5.9-4 KDE PIM library ii libkleopatra14:3.5.9-4 KDE GnuPG interface libraries ii libkmime24:3.5.9-4 KDE MIME interface library ii libkpimidentities1 4:3.5.9-4 KDE PIM user identity information ii libksieve0 4:3.5.9-4 KDE mail/news message filtering li ii libmimelib1c2a 4:3.5.9-4 KDE mime library ii libpng12-0 1.2.27-1PNG library - runtime ii libqt3-mt3:3.3.8b-5 Qt GUI Library (Threaded runtime v ii libsm6 2:1.0.3-2 X11 Session Management library ii libstdc++6 4.3.1-2 The GNU Standard C++ Library v3 ii libx11-6 2:1.1.4-2 X11 client-side library ii libxcursor1 1:1.1.9-1 X cursor management library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxft2 2.1.12-3FreeType-based font drawing librar ii libxi6 2:1.1.3-1 X11 Input extension library ii libxinerama1 2:1.0.3-2 X11 Xinerama extension library ii libxrandr2 2:1.2.2-2 X11 RandR extension library ii libxrender1 1:0.9.4-2 X Rendering Extension client libra ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii perl 5.10.0-11 Larry Wall's Practical Extraction ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages kmail recommends: ii kmailcvt 4:3.5.9-4 KDE KMail mail folder converter ii procmail 3.22-16Versatile e-mail processor -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#607796: Should include lvs=/sbin/lvs option in default /etc/mylvmbackup.conf
Package: mylvmbackup
Version: 0.9-1
Severity: normal
Tags: patch
Option lvs= is not included in default /etc/mylvmbackup.conf
If you launch backupfrom a root shell, it makes no difference, because /sbin
is in root's path. But if you launch it from a cron job, it fails with te
following error:
't exec lvs: No existe el fichero o el directorio at /usr/bin/mylvmbackup
line 734 (#1)
(W exec) A system(), exec(), or piped open call could not execute the
named program for the indicated reason. Typical reasons include: the
permissions were wrong on the file, the file wasn't found in
$ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that
can't be run for similar reasons. (Or maybe your system doesn't support
#! at all.)
Use of uninitialized value $lv in substitution (s///) at
/usr/bin/mylvmbackup
line 736 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl will try to tell you the
name of the variable (if any) that was undefined. In some cases it
cannot
do this, so it also tells you what operation you used the undefined
value
in. Note, however, that perl optimizes your program and the operation
displayed in the warning may not necessarily appear literally in your
program. For example, that $foo is usually optimized into that
. $foo, and the warning will refer to the concatenation (.) operator,
even though there is no . in your program.
Use of uninitialized value $lv in substitution (s///) at
/usr/bin/mylvmbackup
line 737 (#1)
This option will be the same for nearly all Debian users and cases, so it
should be put by default in configuration file.
-- System Information:
Debian Release: 5.0.7
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages mylvmbackup depends on:
ii libconfig-inifiles-perl 2.39-5 Read .ini-style configuration file
ii libdbd-mysql-perl 4.007-1+lenny1 A Perl5 database interface to the
ii libtimedate-perl 1.1600-9 Time and date functions for Perl
ii lvm2 2.02.39-8 The Linux Logical Volume Manager
mylvmbackup recommends no packages.
Versions of packages mylvmbackup suggests:
ii mysql-server 5.0.51a-24+lenny4 MySQL database server (metapackage
ii mysql-server-5.0 [mysq 5.0.51a-24+lenny4 MySQL database server binaries
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#566079: linux-image-2.6.32-trunk-sparc64: SBUS sunbmac module doesn't work
Package: linux-2.6 Version: 2.6.32-5 Severity: important Since I upgraded my Ultra 1 Sparc from lenny to testing/squeeze, I cannot make Sbus Big Mac to run. With lenny's 2.6.26, it worked OK, but with both testing's 2.6.30 and sid's 2.6.32, I get the following message: [ 723.175812] sunbmac.c:v2.1 August 26, 2008 David S. Miller (da...@davemloft.net) [ 723.176341] BIGMAC: Cannot map BigMAC transceiver registers. and card is not itialized -- Package-specific info: ** Version: Linux version 2.6.32-trunk-sparc64 (Debian 2.6.32-5) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Sun Jan 10 23:56:57 UTC 2010 ** Command line: root=/dev/sda2 ro ** Not tainted ** Kernel log: [ 40.157359] Initializing cgroup subsys net_cls [ 40.160145] devtmpfs: initialized [ 40.164253] regulator: core version 0.5 [ 40.164997] NET: Registered protocol family 16 [ 40.176025] SYSIO: UPA portID , at 01fe [ 40.197929] bio: create slab bio-0 at 0 [ 40.199174] vgaarb: loaded [ 40.201734] /s...@1f,0/eep...@f,120: Mostek regs at 0x1fff120 [ 40.202491] AUXIO: Found device at /s...@1f,0/au...@f,190 [ 40.202688] Switching to clocksource tick [ 40.222095] NET: Registered protocol family 2 [ 40.223501] IP route cache hash table entries: 4096 (order: 2, 32768 bytes) [ 40.228283] TCP established hash table entries: 16384 (order: 5, 262144 bytes) [ 40.229980] TCP bind hash table entries: 16384 (order: 4, 131072 bytes) [ 40.231014] TCP: Hash tables configured (established 16384 bind 16384) [ 40.231121] TCP reno registered [ 40.232194] NET: Registered protocol family 1 [ 40.232983] Unpacking initramfs... [ 43.336462] Freeing initrd memory: 7437k freed [ 43.340982] audit: initializing netlink socket (disabled) [ 43.341170] type=2000 audit(3.268:1): initialized [ 43.342521] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 43.372797] VFS: Disk quotas dquot_6.5.2 [ 43.373902] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 43.375254] msgmni has been set to 610 [ 43.378037] alg: No test for stdrng (krng) [ 43.379024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 43.379169] io scheduler noop registered [ 43.379256] io scheduler anticipatory registered [ 43.379346] io scheduler deadline registered [ 43.379644] io scheduler cfq registered (default) [ 43.414394] Console: switching to colour frame buffer device 144x56 [ 43.444394] /s...@1f,0/cg...@2,0: CGsix [TGX sparc] at 0:1ff2000 [ 43.467803] [drm] Initialized drm 1.1.0 20060810 [ 43.468731] f005a290: ttyS0 at MMIO 0x1fff110 (irq = 9) is a zs [ 43.469525] f005a290: ttyS1 at MMIO 0x1fff114 (irq = 9) is a zs [ 43.471096] f005b730: Keyboard at MMIO 0x1fff100 (irq = 9) is a zs [ 43.471514] f005b730: Mouse at MMIO 0x1fff104 (irq = 9) is a zs [ 43.473812] Floppy drive(s): fd0 is 1.44M [ 43.488079] FDC 0 is a post-1991 82077 [ 43.490592] Uniform Multi-Platform E-IDE driver [ 43.491286] ide-gd driver 1.18 [ 43.493012] mice: PS/2 mouse device common for all mice [ 43.495474] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 [ 43.503137] TCP cubic registered [ 43.505897] NET: Registered protocol family 10 [ 43.514955] lo: Disabled Privacy Extensions [ 43.521346] Mobile IPv6 [ 43.521567] NET: Registered protocol family 17 [ 43.523033] registered taskstats version 1 [ 43.523792] rtc-m48t59 rtc-m48t59.0: setting system clock to 2010-01-20 20:27:11 UTC (1264019231) [ 44.148899] input: Sun Type 5 keyboard as /devices/root/f0059940/f005b730/serio0/input/input0 [ 44.150175] input: Sun Mouse as /devices/root/f0059940/f005b730/serio1/input/input1 [ 45.243522] SCSI subsystem initialized [ 45.366426] esp: esp0, regs[1ffe880:1ffe840] irq[10] [ 45.366905] esp: esp0 is a FAS100A, 40 MHz (ccf=0), SCSI ID 7 [ 48.370920] scsi0 : esp [ 48.395486] scsi 0:0:0:0: Direct-Access SEAGATE ST32171W SUN2.1G 7462 PQ: 0 ANSI: 2 [ 48.415078] scsi target0:0:0: Beginning Domain Validation [ 48.436556] scsi target0:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) [ 48.456707] scsi target0:0:0: Domain Validation skipping write tests [ 48.467307] scsi target0:0:0: Ending Domain Validation [ 49.684012] scsi 0:0:6:0: CD-ROMNEC CD-ROM DRIVE:466 1.17 PQ: 0 ANSI: 2 [ 49.695874] scsi target0:0:6: Beginning Domain Validation [ 49.713155] scsi target0:0:6: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) [ 49.727605] scsi target0:0:6: Domain Validation skipping write tests [ 49.739994] scsi target0:0:6: Ending Domain Validation [ 50.015670] sd 0:0:0:0: [sda] 4157201 512-byte logical blocks: (2.12 GB/1.98 GiB) [ 50.033169] sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray [ 50.046490] Uniform CD-ROM driver Revision: 3.20 [ 50.060144] sd 0:0:0:0: [sda] Write Protect is off [ 50.074007] sd 0:0:0:0: [sda] Mode Sense: cf
Bug#581629: kdebase-workspace-bin: krunner stops answering to ALT+F2 after some (random) time
Package: kdebase-workspace-bin Version: 4:4.4.3-1 Severity: important Tags: sid After upgrading to kde 4.4.3 (sid), I have noticed that krunner stops answering to ALT+F2 after random time. If you kill and launch krunner again, it starts working again. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (650, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3-amd64-preemp-1000 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kdebase-workspace-bin depends on: ii kaboom 1.1.2The Debian KDE settings migration ii kdebase-runtime 4:4.4.3-1runtime components from the offici ii kdebase-workspace-d 4:4.4.3-1shared data files for the KDE 4 ba ii kdebase-workspace-k 4:4.4.3-1KDE greet libraries for authentica ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libfontconfig1 2.8.0-2.1generic font configuration library ii libfreetype62.3.11-1 FreeType 2 font engine, shared lib ii libgl1-mesa-glx [li 7.7.1-1 A free implementation of the OpenG ii libglib2.0-02.24.0-1 The GLib library of C routines ii libice6 2:1.0.6-1X11 Inter-Client Exchange library ii libkde3support4 4:4.4.3-1the KDE 3 Support Library for the ii libkdecore5 4:4.4.3-1the KDE Platform Core Library ii libkdeui5 4:4.4.3-1the KDE Platform User Interface Li ii libkephal4 4:4.4.3-1API for easier handling of multihe ii libkfile4 4:4.4.3-1the File Selection Dialog Library ii libkio5 4:4.4.3-1the Network-enabled File Managemen ii libknewstuff2-4 4:4.4.3-1the Get Hot New Stuff v2 Library ii libknewstuff3-4 4:4.4.3-1the Get Hot New Stuff v3 Library ii libknotifyconfig4 4:4.4.3-1library for configuring KDE Notifi ii libkparts4 4:4.4.3-1the Framework for the KDE Platform ii libkpty44:4.4.3-1the Pseudo Terminal Library for th ii libkscreensaver54:4.4.3-1library of the KDE Screensaver sys ii libkutils4 4:4.4.3-1various utility classes for the KD ii libkworkspace4 4:4.4.3-1library for the kdebase workspace ii libnepomuk4 4:4.4.3-1the Nepomuk Meta Data Library ii libnepomukquery4a 4:4.4.3-1the Nepomuk Query Library for the ii libpam0g1.1.1-3 Pluggable Authentication Modules l ii libphonon4 4:4.6.0really4.4.0-4 the core library of the Phonon mul ii libplasma3 4:4.4.3-1the Plasma Library for the KDE Pla ii libplasmagenericshe 4:4.4.3-1shared elements for all the plasma ii libpng12-0 1.2.43-1 PNG library - runtime ii libprocesscore4a4:4.4.3-1library for ksysguard based proces ii libprocessui4a 4:4.4.3-1library for ksysguard process user ii libqimageblitz4 1:0.0.4-4QImageBlitz image effects library ii libqt4-dbus 4:4.6.2-4Qt 4 D-Bus module ii libqt4-network 4:4.6.2-4Qt 4 network module ii libqt4-qt3support 4:4.6.2-4Qt 3 compatibility library for Qt ii libqt4-script 4:4.6.2-4Qt 4 script module ii libqt4-sql 4:4.6.2-4Qt 4 SQL module ii libqt4-xml 4:4.6.2-4Qt 4 XML module ii libqtcore4 4:4.6.2-4Qt 4 core module ii libqtgui4 4:4.6.2-4Qt 4 GUI module ii libsm6 2:1.1.1-1X11 Session Management library ii libsolid4 4:4.4.3-1Solid Library for KDE Platform ii libsolidcontrol44:4.4.3-1library for Solid based network ma ii libsolidcontrolifac 4:4.4.3-1library for Solid based network in ii libsoprano4 2.4.2+dfsg.1-1 libraries for the Soprano RDF fram ii libstdc++6 4.4.4-1 The GNU Standard C++ Library v3 ii libstreamanalyzer0 0.7.2-1 streamanalyzer library for Strigi ii libusb-0.1-42:0.1.12-14 userspace USB programming library ii libx11-62:1.3.3-3X11 client-side library ii libxau6 1:1.0.5-2X11 authorisation library ii libxcursor1 1:1.1.10-2 X cursor management library ii libxext62:1.1.1-3X11 miscellaneous extension librar ii libxfixes3 1:4.0.4-2X11 miscellaneous 'fixes' extensio ii libxft2 2.1.14-2 FreeType-based font drawing librar ii libxi6 2:1.3-4 X11 Input
Bug#603464: gramps: closes with error every time you try to export tree
Package: gramps Version: 3.2.3-3 Severity: important Every time I try to export tree, it closes with error. You can correctly export it, but it closes at the end of process. If you try to cancel at any step on the export process, it also closes. This is the error you obtain: The program 'gramps.py' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 12029 error_code 3 request_code 20 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (650, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64-preemp-1000-scsiprocpci (SMP w/4 CPU cores; PREEMPT) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gramps depends on: ii librsvg2-common 2.26.3-1SAX-based renderer library for SVG ii python 2.6.6-3+squeeze1interactive high-level object-orie ii python-central 0.6.16+nmu1 register and build utility for Pyt ii python-gtk2 2.17.0-4Python bindings for the GTK+ widge ii xdg-utils1.0.2+cvs20100307-2 desktop integration utilities from Versions of packages gramps recommends: ii graphviz 2.26.3-5 rich set of graph drawing tools ii python-gtkmozembed2.25.3-6 Python bindings for the GtkMozEmbe ii python-webkit 1.1.7-1+b1 WebKit/Gtk Python bindings Versions of packages gramps suggests: ii python-enchant1.5.3-2spellchecking library for Python ii python-gtkspell 2.25.3-6 Python bindings for the GtkSpell l ii ttf-freefont 20090104-7 Freefont Serif, Sans and Mono True -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#733011: linux-image-3.11-2-amd64, USB3 card reader, Asus M5A97 EVO R2.0 (AMD 970 chipset), continuous errors
Package: src:linux Version: 3.11.10-1 Severity: normal Tags: upstream Dear Maintainer, * What led up to the situation? At first, it didn't work at all (POST never ended). After activating IOMMU on BIOS, and disabling USB3 legacy support, I could make it boot. Some of the functions are working (SD/MicroSD readers, I have no more type of card available). * What exactly did you do (or not do) that was effective (or ineffective)? I've tried changing every USB3 related BIOS option, with no success in avoiding errors * What was the outcome of this action? * What outcome did you expect instead? Stop making noise in dmesg/messages... -- Package-specific info: ** Version: Linux version 3.11-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04) ** Command line: BOOT_IMAGE=/vmlinuz-3.11-2-amd64 root=/dev/mapper/system_vg-root_lv ro quiet splash ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 1786.459216] usb 2-2: new low-speed USB device number 70 using xhci_hcd [ 1786.548173] usb 2-2: Device not responding to set address. [ 1786.839969] usb 2-2: Device not responding to set address. [ 1787.042871] usb 2-2: device not accepting address 70, error -71 [ 1787.450650] usb 2-2: new low-speed USB device number 72 using xhci_hcd [ 1787.539602] usb 2-2: Device not responding to set address. [ 1787.831466] usb 2-2: Device not responding to set address. [ 1788.034298] usb 2-2: device not accepting address 72, error -71 [ 1788.442074] usb 2-2: new low-speed USB device number 74 using xhci_hcd [ 1788.531065] usb 2-2: Device not responding to set address. [ 1788.822884] usb 2-2: Device not responding to set address. [ 1789.025726] usb 2-2: device not accepting address 74, error -71 [ 1789.433504] usb 2-2: new low-speed USB device number 76 using xhci_hcd [ 1789.522476] usb 2-2: Device not responding to set address. [ 1789.814330] usb 2-2: Device not responding to set address. [ 1790.017158] usb 2-2: device not accepting address 76, error -71 [ 1790.424932] usb 2-2: new low-speed USB device number 78 using xhci_hcd [ 1790.513986] usb 2-2: Device not responding to set address. [ 1790.805861] usb 2-2: Device not responding to set address. [ 1791.008586] usb 2-2: device not accepting address 78, error -71 [ 1791.416361] usb 2-2: new low-speed USB device number 80 using xhci_hcd [ 1791.505395] usb 2-2: Device not responding to set address. [ 1791.797321] usb 2-2: Device not responding to set address. [ 1792.12] usb 2-2: device not accepting address 80, error -71 [ 1792.407790] usb 2-2: new low-speed USB device number 82 using xhci_hcd [ 1792.496852] usb 2-2: Device not responding to set address. [ 1792.788619] usb 2-2: Device not responding to set address. [ 1792.991446] usb 2-2: device not accepting address 82, error -71 [ 1793.399217] usb 2-2: new low-speed USB device number 84 using xhci_hcd [ 1793.488169] usb 2-2: Device not responding to set address. [ 1793.779988] usb 2-2: Device not responding to set address. [ 1793.982870] usb 2-2: device not accepting address 84, error -71 [ 1794.390646] usb 2-2: new low-speed USB device number 86 using xhci_hcd [ 1794.479597] usb 2-2: Device not responding to set address. [ 1794.771493] usb 2-2: Device not responding to set address. [ 1794.974301] usb 2-2: device not accepting address 86, error -71 [ 1795.382074] usb 2-2: new low-speed USB device number 88 using xhci_hcd [ 1795.471029] usb 2-2: Device not responding to set address. [ 1795.762907] usb 2-2: Device not responding to set address. [ 1795.965728] usb 2-2: device not accepting address 88, error -71 [ 1796.373507] usb 2-2: new low-speed USB device number 90 using xhci_hcd [ 1796.462524] usb 2-2: Device not responding to set address. [ 1796.754373] usb 2-2: Device not responding to set address. [ 1796.957169] usb 2-2: device not accepting address 90, error -71 [ 1797.364933] usb 2-2: new low-speed USB device number 92 using xhci_hcd [ 1797.453925] usb 2-2: Device not responding to set address. [ 1797.745852] usb 2-2: Device not responding to set address. [ 1797.948586] usb 2-2: device not accepting address 92, error -71 [ 1798.356377] usb 2-2: new low-speed USB device number 94 using xhci_hcd [ 1798.445384] usb 2-2: Device not responding to set address. [ 1798.737197] usb 2-2: Device not responding to set address. [ 1798.940016] usb 2-2: device not accepting address 94, error -71 [ 1799.347791] usb 2-2: new low-speed USB device number 96 using xhci_hcd [ 1799.436841] usb 2-2: Device not responding to set address. [ 1799.728621] usb 2-2: Device not responding to set address. [ 1799.931445] usb 2-2: device not accepting address 96, error -71 [ 1800.339222] usb 2-2: new low-speed USB device number 98 using xhci_hcd [ 1800.428210] usb 2-2: Device not responding to set address. [ 1800.720084] usb 2-2: Device not responding to set address. [ 1800.922831] usb 2-2: device not accepting address 98, error -71 [
Bug#840496: More data
Same here More info: root@nas:/srv/Descargas# service amule-daemon start Job for amule-daemon.service failed because the control process exited with error code. See "systemctl status amule-daemon.service" and "journalctl -xe" for details. root@nas:/srv/Descargas# systemctl status amule-daemon.service ● amule-daemon.service - LSB: Daemonized version of aMule. Loaded: loaded (/etc/init.d/amule-daemon; generated; vendor preset: enabled) Active: failed (Result: exit-code) since jue 2016-10-13 22:31:15 CEST; 1min 12s ago Docs: man:systemd-sysv-generator(8) Process: 18125 ExecStart=/etc/init.d/amule-daemon start (code=exited, status=1/FAILURE) oct 13 22:31:15 nas amule-daemon[18125]: [8] ?? in /usr/bin/amuled[0x427e49] oct 13 22:31:15 nas amule-daemon[18125]: [9] wxEntry(int&, wchar_t**) in /usr/ lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0[0x7f368e3bb332] oct 13 22:31:15 nas amule-daemon[18125]: [10] ?? in /usr/bin/amuled[0x420c42] oct 13 22:31:15 nas amule-daemon[18125]: [11] __libc_start_main in /lib/ x86_64-linux-gnu/libc.so.6[0x7f368d6a22b1] oct 13 22:31:15 nas amule-daemon[18125]: [12] ?? in /usr/bin/amuled[0x42675a] oct 13 22:31:15 nas amule-daemon[18125]: Aborted oct 13 22:31:15 nas systemd[1]: amule-daemon.service: Control process exited, code=exited status=1 oct 13 22:31:15 nas systemd[1]: Failed to start LSB: Daemonized version of aMule.. oct 13 22:31:15 nas systemd[1]: amule-daemon.service: Unit entered failed state. oct 13 22:31:15 nas systemd[1]: amule-daemon.service: Failed with result 'exit-code'. journalctl -xe relevant output: -- Subject: Unit amule-daemon.service has begun start-up -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit amule-daemon.service has begun starting up. oct 13 22:33:33 nas amule-daemon[18211]: 22:33:33: Warning: Mismatch between the program and library build versions detected. oct 13 22:33:33 nas amule-daemon[18211]: The library used 3.0 (wchar_t,compiler with C++ ABI 1009,wx containers,compatible with 2.8), oct 13 22:33:33 nas amule-daemon[18211]: and your program used 3.0 (wchar_t,compiler with C++ ABI 1010,wx containers,compatible with 2.8). oct 13 22:33:33 nas amule-daemon[18211]: Assertion failed: ../../../../src/ libs/common/Path.cpp:CPath:258: Assertion 'm_printable.Length()' failed. oct 13 22:33:33 nas amule-daemon[18211]: Backtrace follows: oct 13 22:33:33 nas amule-daemon[18211]: [3] wxOnAssert(char const*, int, char const*, char const*, char const*) in /usr/lib/x86_64-linux-gnu/ libwx_baseu-3.0.so.0[0x7fc79298cc oct 13 22:33:33 nas amule-daemon[18211]: [4] ?? in /usr/bin/amuled[0x57f3cc] oct 13 22:33:33 nas amule-daemon[18211]: [5] ?? in /usr/bin/amuled[0x52a618] oct 13 22:33:33 nas amule-daemon[18211]: [6] ?? in /usr/bin/amuled[0x53524e] oct 13 22:33:33 nas amule-daemon[18211]: [7] ?? in /usr/bin/amuled[0x433935] oct 13 22:33:33 nas amule-daemon[18211]: [8] ?? in /usr/bin/amuled[0x427e49] oct 13 22:33:33 nas amule-daemon[18211]: [9] wxEntry(int&, wchar_t**) in /usr/ lib/x86_64-linux-gnu/libwx_baseu-3.0.so.0[0x7fc792a1f332] oct 13 22:33:33 nas amule-daemon[18211]: [10] ?? in /usr/bin/amuled[0x420c42] oct 13 22:33:33 nas amule-daemon[18211]: [11] __libc_start_main in /lib/ x86_64-linux-gnu/libc.so.6[0x7fc791d062b1] oct 13 22:33:33 nas amule-daemon[18211]: [12] ?? in /usr/bin/amuled[0x42675a] oct 13 22:33:33 nas amule-daemon[18211]: Aborted oct 13 22:33:33 nas systemd[1]: amule-daemon.service: Control process exited, code=exited status=1 oct 13 22:33:33 nas systemd[1]: Failed to start LSB: Daemonized version of aMule.. -- Subject: Unit amule-daemon.service has failed -- Defined-By: systemd -- Support: https://www.debian.org/support -- -- Unit amule-daemon.service has failed. -- -- The result is failed. oct 13 22:33:33 nas systemd[1]: amule-daemon.service: Unit entered failed state. oct 13 22:33:33 nas systemd[1]: amule-daemon.service: Failed with result 'exit-code'. -- David Garabana Barro jabber & google talk ID:da...@garabana.com Clave pública PGP/GPG: http://davide.garabana.com/pgp.html
Bug#850768: amule-daemon fails on startup (same as #840496)
Package: amule-daemon Version: 1:2.3.2-1+b2 Severity: important Tags: l10n Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? After upgrading amule-daemon, it stopped starting * What exactly did you do (or not do) that was effective (or ineffective)? Deleting ~/.aMule/shareddir.dat made amule-daemon start again. Further investigation showed that problem arises when you share a directory using non english characters. For example, accented vowels (á, é, Ó...) * What was the outcome of this action? Unsharing directories with non english characters made it start again. Once you share a single non english name, it crash again on start. * What outcome did you expect instead? Update shouldn't break amule-daemon internationalization I'm pretty sure that this bug is the very same as #840496. *** End of the template - remove these template lines *** -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (900, 'testing'), (700, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.8.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages amule-daemon depends on: ii amule-common 1:2.3.2-1 ii libboost-system1.62.0 1.62.0+dfsg-4 ii libc6 2.24-8 ii libcrypto++6 5.6.4-6 ii libgcc11:6.2.1-5 ii libpng16-161.6.26-6 ii libreadline7 7.0-1 ii libstdc++6 6.2.1-5 ii libupnp6 1:1.6.19+git20160116-1.2 ii libwxbase3.0-0v5 3.0.2+dfsg-2 ii zlib1g 1:1.2.8.dfsg-4 Versions of packages amule-daemon recommends: ii amule-utils 1:2.3.2-1+b2 ii unzip6.0-21 amule-daemon suggests no packages. -- Configuration Files: /etc/default/amule-daemon changed: AMULED_USER="amuled" AMULED_HOME="/srv/Descargas" AMULED_UMASK=0002 -- no debconf information
Bug#821271: postgrey: aborts on startup with no error message when it can't bind to port
Package: postgrey Version: 1.36-5.1 Followup-For: Bug #821271 It still happens on buster. Found when I disabled IPv6: net.ipv6.conf.all.disable_ipv6 = 1 Postgrey started to silently fail: root@myhost:/var/log# systemctl status postgrey ● postgrey.service - LSB: Start/stop the postgrey daemon Loaded: loaded (/etc/init.d/postgrey; generated) Active: active (exited) since Fri 2020-07-17 11:36:14 CEST; 2min 54s ago Docs: man:systemd-sysv-generator(8) Process: 6570 ExecStart=/etc/init.d/postgrey start (code=exited, status=0/SUCCESS) jul 17 11:36:14 myhost postgrey[6570]: whitelisted: 213.143.66.210/32 jul 17 11:36:14 myhost postgrey[6570]: Pid_file "/var/run/postgrey.pid" already exists. Overwriting! jul 17 11:36:14 myhost postgrey[6577]: Process Backgrounded jul 17 11:36:14 myhost postgrey[6577]: 2020/07/17-11:36:14 postgrey (type Net::Server::Multiplex) starting! pid(6577) jul 17 11:36:14 myhost postgrey[6570]: . jul 17 11:36:14 myhost systemd[1]: Started LSB: Start/stop the postgrey daemon. jul 17 11:36:14 myhost postgrey[6577]: Resolved [localhost]:10023 to [127.0.0.1]:10023, IPv4 jul 17 11:36:14 myhost postgrey[6577]: Resolved [localhost]:10023 to [::1]:10023, IPv6 jul 17 11:36:14 myhost postgrey[6577]: Binding to TCP port 10023 on host 127.0.0.1 with IPv4 jul 17 11:36:14 myhost postgrey[6577]: Binding to TCP port 10023 on host ::1 with IPv6 root@myhost:/var/log# root@myhost:/var/log# ps auxw|grep postg|grep -v grep root@myhost:/var/log# systemd should be aware about process dying! -- System Information: Debian Release: 10.4 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.19.0-9-amd64 (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8), LANGUAGE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/bash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages postgrey depends on: ii adduser3.118 ii debconf [debconf-2.0] 1.5.71 ii libberkeleydb-perl 0.55-2 ii libnet-dns-perl1.19-1 ii libnet-server-perl 2.009-1 ii libnetaddr-ip-perl 4.079+dfsg-1+b3 ii perl 5.28.1-6 ii ucf3.0038+nmu1 Versions of packages postgrey recommends: ii libnet-rblclient-perl 0.5-3 ii libparse-syslog-perl 1.10-3 ii postfix3.4.10-0+deb10u1 postgrey suggests no packages. -- debconf information: postgrey/1.32-3_changeport:
Bug#976644: linux-image-4.19.0-13-amd64: apcupsd usb connection with UPS fails since upgrade to 4.19.0-13-amd64
Package: src:linux Version: 4.19.160-2 Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? Upgrade to linux-image-4.19.0-13-amd64 makes apcupsd unable to contact UPS through USB * What exactly did you do (or not do) that was effective (or ineffective)? Downgrading to 4.19.0-12 makes apcupsd contact UPS again * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 4.19.0-13-amd64 (debian-ker...@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.160-2 (2020-11-28) ** Command line: BOOT_IMAGE=/vmlinuz-4.19.0-13-amd64 root=/dev/mapper/system_vg-root_lv ro quiet ** Not tainted ** Kernel log: [0.00] Linux version 4.19.0-13-amd64 (debian-ker...@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.160-2 (2020-11-28) [0.00] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-13-amd64 root=/dev/mapper/system_vg-root_lv ro quiet [0.00] x86/fpu: x87 FPU will use FXSAVE [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009fbff] usable [0.00] BIOS-e820: [mem 0x0009fc00-0x0009] reserved [0.00] BIOS-e820: [mem 0x000e4000-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0xbff9] usable [0.00] BIOS-e820: [mem 0xbffa-0xbffadfff] ACPI data [0.00] BIOS-e820: [mem 0xbffae000-0xbffd] ACPI NVS [0.00] BIOS-e820: [mem 0xbffe-0xbfff] reserved [0.00] BIOS-e820: [mem 0xff70-0x] reserved [0.00] BIOS-e820: [mem 0x0001-0x00013fff] usable [0.00] NX (Execute Disable) protection: active [0.00] SMBIOS 2.3 present. [0.00] DMI: System manufacturer System Product Name/A8R32-MVP Deluxe, BIOS 0701 03/03/2007 [0.00] tsc: Fast TSC calibration using PIT [0.00] tsc: Detected 2205.048 MHz processor [0.007363] e820: update [mem 0x-0x0fff] usable ==> reserved [0.007366] e820: remove [mem 0x000a-0x000f] usable [0.018480] AGP: No AGP bridge found [0.018583] last_pfn = 0x14 max_arch_pfn = 0x4 [0.018588] MTRR default type: uncachable [0.018589] MTRR fixed ranges enabled: [0.018591] 0-9 write-back [0.018592] A-E uncachable [0.018594] F-F write-protect [0.018594] MTRR variable ranges enabled: [0.018596] 0 base 00 mask FF write-back [0.018598] 1 base 01 mask FFC000 write-back [0.018600] 2 base 00C000 mask FFC000 uncachable [0.018600] 3 disabled [0.018601] 4 disabled [0.018602] 5 disabled [0.018602] 6 disabled [0.018603] 7 disabled [0.019120] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [0.019185] e820: update [mem 0xc000-0x] usable ==> reserved [0.019194] last_pfn = 0xbffa0 max_arch_pfn = 0x4 [0.024428] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [0.056784] RAMDISK: [mem 0x34a0d000-0x364fdfff] [0.056794] ACPI: Early table checksum verification disabled [0.057190] ACPI: RSDP 0x000FAD00 24 (v02 ACPIAM) [0.057194] ACPI: XSDT 0xBFFA0100 44 (v01 A_M_I_ OEMXSDT 03000703 MSFT 0097) [0.057201] ACPI: FACP 0xBFFA0290 F4 (v03 A_M_I_ OEMFACP 03000703 MSFT 0097) [0.057208] ACPI: DSDT 0xBFFA0430 006E70 (v01 A0466 A0466001 0001 INTL 02002026) [0.057212] ACPI: FACS 0xBFFAE000 40 [0.057215] ACPI: FACS 0xBFFAE000 40 [0.057218] ACPI: APIC 0xBFFA0390 5C (v01 A_M_I_ OEMAPIC 03000703 MSFT 0097) [0.057221] ACPI: MCFG 0xBFFA03F0 3C (v01 A_M_I_ OEMMCFG 03000703 MSFT 0097) [0.057225] ACPI: OEMB 0xBFFAE040 7B (v01 A_M_I_ AMI_OEM 03000703 MSFT 0097) [0.057238] ACPI: Local APIC address 0xfee0 [0.057370] Scanning NUMA topology in Northbridge 24 [0.057417] No NUMA configuration found [0.057418] Faking a node at [mem 0x-0x00013fff] [0.057424] NODE_DATA(0) allocated [mem 0x13fff8000-0x13fffcfff] [0.057492] Zone ranges: [0.057493] DMA [mem 0x1000-0x00ff] [0.057495] DMA32[mem 0x0100-0x] [0.057496] Normal [mem 0x0001-0x00013fff] [0.057498] Device empty [0.057499] Movable zone start for each node [0.057500] Early memory node ranges [0.057502] node 0: [mem 0x1000-0x0009efff] [0.057503] node 0: [mem
