Bug#1027900: parole 4.16.0-2 does not start

2023-01-04 Thread Сергей Фёдоров


Package: parole
Version: 4.16.0-2
Severity: normal
X-Debbugs-Cc: serfyod...@yandex.ru

Dear Maintainer,

parole 4.16.0-2 when running in the terminal emulator outputs :
free(): invalid pointer
Emergency stop

parole 4.16.0-1 is up and running.


-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-6-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages parole depends on:
ii  gstreamer1.0-alsa [gstreamer1.0-audiosink]  1.20.4-1
ii  gstreamer1.0-libav  1.20.3-1+b1
ii  gstreamer1.0-plugins-bad [gstreamer1.0-audiosink]   1.20.4-1+b1
ii  gstreamer1.0-plugins-base   1.20.4-1
ii  gstreamer1.0-plugins-good [gstreamer1.0-audiosink]  1.20.3-1+b1
ii  gstreamer1.0-x  1.20.4-1
ii  libc6   2.36-7
ii  libcairo2   1.16.0-7
ii  libdbus-1-3 1.14.4-1
ii  libdbus-glib-1-20.112-3
ii  libgdk-pixbuf-2.0-0 2.42.10+dfsg-1
ii  libglib2.0-02.74.4-1
ii  libgstreamer-plugins-base1.0-0  1.20.4-1
ii  libgstreamer1.0-0   1.20.4-1
ii  libgtk-3-0  3.24.36-1
ii  libnotify4  0.8.1-1
ii  libtagc01.13-1
ii  libx11-62:1.8.3-3
ii  libxfce4ui-2-0  4.18.0-1
ii  libxfce4util7   4.18.0-1
ii  libxfconf-0-3   4.18.0-1

parole recommends no packages.

Versions of packages parole suggests:
ii  gstreamer1.0-plugins-bad   1.20.4-1+b1
ii  gstreamer1.0-plugins-ugly  1.20.3-1

-- no debconf information



Bug#1016285: mupdf-gl error segmentation

2022-12-31 Thread Сергей Фёдоров
Package: mupdf
Version: 1.21.1+ds1-1
Followup-For: Bug #1016285
X-Debbugs-Cc: serfyod...@yandex.ru

Dear Maintainer,

GeForce Graphics Card ASUS EN7300GT SILENT / HTD / 256M

Debian 11.6.0 64 installs:

Source: mesa  24 packets  v.20.3.5-1
Source: libglvnd  13 packets  v.1.3.2-1
Source: 9.0.2-1.1: libglu  2 packets  v.9.0.1-1

With this version of packages, any version of mupdf is compiled from source 
texts (from git too) and works fine. And the binary package mupdf 1.21.1+dd1-1 
is installed and works fine.

But if you install:

Source: mesa  24 packets  22.3.1-1
Source: libglvnd  14 packets  v.1.5.0-1
Source: libglu  2 packets  v.9.0.2-1.1

then when mupdf-gl is started, the message "Error segmentation" is displayed 
and its execution is terminated. This happens with both the Linux kernel 
5.10.20 and 6.0.0.6.


xserver-xorg-video-nouveau 1:1.0.17-1  X.org X-сервер — VideoDriver Nouveau

Source: mesa  24 packets  v.20.3.5-1:
libxatracker-dev
libxatracker2
libd3dadapter9-mesa
libd3dadapter9-mesa-dev
libegl-mesa0
libegl1-mesa
libegl1-mesa-dev
libgbm-dev
libgbm1
libgl1-mesa-dev
libgl1-mesa-dri
libgl1-mesa-glx
libglapi-mesa
libgles2-mesa
libgles2-mesa-dev
libglx-mesa0
libosmesa6
libosmesa6-dev
libwayland-egl1-mesa
mesa-common-dev
mesa-opencl-icd
mesa-va-drivers
mesa-vdpau-drivers
mesa-vulkan-drivers


Source: libglvnd:  14 packets  v.1.3.2-1:
libegl-dev
libegl1
libgl-dev
libgl1
libgles-dev
libgles1
libgles2
libglvnd-core-dev
libglvnd-dev
libglvnd0
libglx-dev
libglx0
libopengl-dev
libopengl0


Source: libglu  2 packets  v.9.0.1-1
libglu1-mesa
libglu1-mesa-dev


xserver-xorg-video-nouveau 1:1.0.17-1  X.org X-сервер — видеодрайвер Nouveau

Source: mesa:  22.3.1-1:
libxatracker-dev
libxatracker2
libd3dadapter9-mesa
libd3dadapter9-mesa-dev
libegl-mesa0
libegl1-mesa
libegl1-mesa-dev
libgbm-dev
libgbm1
libgl1-mesa-dev
libgl1-mesa-dri
libgl1-mesa-glx
libglapi-mesa
libgles2-mesa
libgles2-mesa-dev
libglx-mesa0
libosmesa6
libosmesa6-dev
libwayland-egl1-mesa
mesa-common-dev
mesa-opencl-icd
mesa-va-drivers
mesa-vdpau-drivers
mesa-vulkan-drivers


Source: libglvnd:  14 packets  v.1.5.0-1:
libegl-dev
libegl1
libgl-dev
libgl1
libgles-dev
libgles1
libgles2
libglvnd-core-dev
libglvnd-dev
libglvnd0
libglx-dev
libglx0
libopengl-dev
libopengl0


Source: libglu  2 packets  v.9.0.2-1.1:
libglu1-mesa
libglu1-mesa-dev





-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-6-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages mupdf depends on:
ii  libc62.36-7
ii  libfreetype6 2.12.1+dfsg-3
ii  libgl1   1.3.2-1
ii  libglut3.12  3.4.0-1
ii  libgumbo10.10.1+dfsg-4
ii  libharfbuzz0b6.0.0-1
ii  libjbig2dec0 0.19-3
ii  libjpeg62-turbo  1:2.1.2-1+b1
ii  libmujs2 1.3.2-1
ii  libopenjp2-7 2.5.0-1
ii  libssl3  3.0.7-1
ii  libx11-6 2:1.8.3-3
ii  libxext6 2:1.3.4-1+b1
ii  zlib1g   1:1.2.13.dfsg-1

mupdf recommends no packages.

Versions of packages mupdf suggests:
pn  mupdf-tools  

-- no debconf information



Bug#1024368: Problems updating libopenexr25 from version 2.5.4-2 to 2.5.7-1

2022-11-18 Thread Сергей Фёдоров
Package: libopenexr25
Version: 2.5.4-2
Severity: normal
X-Debbugs-Cc: serfyod...@yandex.ru  

Dear Maintainer,

When trying to update the package "libopenexr25" from version 2.5.4-2 to 
2.5.7-1, 
the message is displayed: Depends on: libilmbase25 (>=2.5.7), but 2.5.4-1 will 
be installed

Depends: libc6 (>= 2.29), libgcc-s1 (>= 3.0), libilmbase25 (>= 2.5.7), 
libstdc++6 (>= 9), zlib1g (>= 1:1.2.0)
http://www.openexr.com

$ apt-show-versions -p libilmbase25 -a
libilmbase25:amd64 2.5.4-1 install ok installed
No unstable version
libilmbase25:amd64 2.5.4-1 installed: No available version in archive

$ apt-cache -a show libilmbase25
Package: libilmbase25
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 950
Maintainer: Debian PhotoTools Maintainers 

Architecture: amd64
Multi-Arch: same
Source: ilmbase
Version: 2.5.4-1
Replaces: libilmbase23 (>= 2.3)
Depends: libc6 (>= 2.14), libgcc-s1 (>= 3.0), libstdc++6 (>= 6)
Breaks: libilmbase23 (>= 2.3)

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-4-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages libopenexr25 depends on:
ii  libc6 2.36-5
ii  libgcc-s1 12.2.0-9
ii  libilmbase25  2.5.4-1
ii  libstdc++612.2.0-9
ii  zlib1g1:1.2.13.dfsg-1

libopenexr25 recommends no packages.

libopenexr25 suggests no packages.

-- no debconf information



Bug#1023650: vlc: Trying to view video files via Vlc 3.0.18~rc2-1+b1 tightly hangs Debian

2022-11-08 Thread Сергей Фёдоров
Package: vlc
Version: 3.0.18~rc2-1+b1
Severity: critical
Justification: breaks the whole system
X-Debbugs-Cc: serfyod...@yandex.ru

Dear Maintainer,

Trying to view video files via Vlc 3.0.18~rc2-1+b1 tightly hangs Debian

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-2-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages vlc depends on:
ii  vlc-bin  3.0.18~rc2-1+b1
ii  vlc-plugin-base  3.0.18~rc2-1+b1
ii  vlc-plugin-qt3.0.18~rc2-1+b1
ii  vlc-plugin-video-output  3.0.18~rc2-1+b1

Versions of packages vlc recommends:
ii  vlc-l10n   3.0.18~rc2-1
ii  vlc-plugin-access-extra3.0.18~rc2-1+b1
ii  vlc-plugin-notify  3.0.18~rc2-1+b1
ii  vlc-plugin-samba   3.0.18~rc2-1+b1
ii  vlc-plugin-skins2  3.0.18~rc2-1+b1
ii  vlc-plugin-video-splitter  3.0.18~rc2-1+b1
ii  vlc-plugin-visualization   3.0.18~rc2-1+b1

Versions of packages vlc suggests:
pn  vlc-plugin-fluidsynth  
pn  vlc-plugin-jack
pn  vlc-plugin-pipewire
pn  vlc-plugin-svg 

Versions of packages libvlc-bin depends on:
ii  libc62.36-4
ii  libvlc5  3.0.18~rc2-1+b1

Versions of packages libvlc5 depends on:
ii  libc62.36-4
ii  libvlccore9  3.0.18~rc2-1+b1

Versions of packages libvlc5 recommends:
ii  libvlc-bin  3.0.18~rc2-1+b1

Versions of packages vlc-bin depends on:
ii  libc6   2.36-4
ii  libvlc-bin  3.0.18~rc2-1+b1
ii  libvlc5 3.0.18~rc2-1+b1

Versions of packages vlc-plugin-access-extra depends on:
ii  libc62.36-4
ii  libsrt1.5-gnutls 1.5.1-1
ii  libvlccore9 [vlc-plugin-abi-3-0-0f]  3.0.18~rc2-1+b1
ii  libvncclient10.9.13+dfsg-4
ii  libxcb-composite01.15-1
ii  libxcb-shm0  1.15-1
ii  libxcb1  1.15-1

Versions of packages vlc-plugin-base depends on:
ii  liba52-0.7.4 0.7.4-20
ii  libarchive13 3.6.0-1
ii  libaribb24-0 1.0.3-2
ii  libasound2   1.2.7.2-1
ii  libass9  1:0.16.0-1
ii  libavahi-client3 0.8-6+b1
ii  libavahi-common3 0.8-6+b1
ii  libavc1394-0 0.5.4-5
ii  libavcodec59 7:5.1.2-1
ii  libavformat597:5.1.2-1
ii  libavutil57  7:5.1.2-1
ii  libbluray2   1:1.3.3-1
ii  libc62.36-4
ii  libcairo21.16.0-6
ii  libcddb2 1.3.2-7
ii  libchromaprint1  1.5.1-2+b1
ii  libdav1d61.0.0-2
ii  libdbus-1-3  1.14.4-1
ii  libdc1394-25 2.2.6-4
ii  libdca0  0.0.7-2
ii  libdvbpsi10  1.3.3-1
ii  libdvdnav4   6.1.1-1
ii  libdvdread8  6.1.3-1
ii  libebml5 1.4.4-1
ii  libfaad2 2.10.1-1
ii  libflac121.4.2+ds-1
ii  libfontconfig1   2.13.1-4.5
ii  libfreetype6 2.12.1+dfsg-3
ii  libfribidi0  1.0.8-2.1
ii  libgcc-s112.2.0-9
ii  libgcrypt20  1.10.1-2
ii  libglib2.0-0 2.74.1-1
ii  libgnutls30  3.7.8-4
ii  libgpg-error01.46-1
ii  libharfbuzz0b5.2.0-2
ii  libixml101:1.8.4-2
ii  libjpeg62-turbo  1:2.1.2-1+b1
ii  libkate1 0.4.1-11
ii  liblirc-client0  0.10.1-7.1
ii  liblua5.2-0  5.2.4-2
ii  libmad0  0.15.1b-10.1+b1
ii  libmatroska7 1.7.1-1
ii  libmpcdec6   2:0.1~r495-2
ii  libmpeg2-4   0.5.1-9
ii  libmpg123-0  1.31.1-1
ii  libmtp9  1.1.20-1
ii  libncursesw6 6.3+20220423-2
ii  libnfs13 4.0.0-1
ii  libogg0  1.3.5-1
ii  libopenmpt-modplug1  0.8.9.0-openmpt1-2+b1
ii  libopus0 1.3.1-2
ii  libpng16-16  1.6.38-2
ii  libpostproc567:5.1.2-1
ii  libprotobuf-lite23   3.12.4-1+b5
ii  libpulse016.1+dfsg1-2+b1
ii  

Bug#1023645: parole: often the video stops but the sound goes on

2022-11-08 Thread Сергей Фёдоров


Package: parole
Version: 4.16.0-1
Severity: normal
X-Debbugs-Cc: serfyod...@yandex.ru

Dear Maintainer,

Often, the video track stops playing and the audio track plays on. Only 
restarting the Parole fixes the situation.


-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-2-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages parole depends on:
ii  gstreamer1.0-alsa [gstreamer1.0-audiosink]  1.20.3-2
ii  gstreamer1.0-libav  1.20.3-1+b1
ii  gstreamer1.0-plugins-bad [gstreamer1.0-audiosink]   1.20.3-2+b1
ii  gstreamer1.0-plugins-base   1.20.3-2
ii  gstreamer1.0-plugins-good [gstreamer1.0-audiosink]  1.20.3-1+b1
ii  gstreamer1.0-x  1.20.3-2
ii  libc6   2.36-4
ii  libcairo2   1.16.0-6
ii  libdbus-1-3 1.14.4-1
ii  libdbus-glib-1-20.112-2
ii  libgdk-pixbuf-2.0-0 2.42.9+dfsg-1
ii  libglib2.0-02.74.1-1
ii  libgstreamer-plugins-base1.0-0  1.20.3-2
ii  libgstreamer1.0-0   1.20.4-1
ii  libgtk-3-0  3.24.34-3
ii  libnotify4  0.8.1-1
ii  libtagc01.13-1
ii  libx11-62:1.8.1-2
ii  libxfce4ui-2-0  4.16.1-1+b1
ii  libxfce4util7   4.16.0-1
ii  libxfconf-0-3   4.16.0-2

parole recommends no packages.

Versions of packages parole suggests:
ii  gstreamer1.0-plugins-bad   1.20.3-2+b1
ii  gstreamer1.0-plugins-ugly  1.20.3-1

-- no debconf information



Bug#1022847: atril requires libgs9 but ghostscript libgs10

2022-10-26 Thread Сергей Фёдоров


Package: atril
Version: 1.26.0-1
Severity: grave
Justification: renders package unusable
X-Debbugs-Cc: serfyod...@yandex.ru

Dear Maintainer,

Problem: Installing the package "atril" 1.26.0-1 requires installing
the package libgs9, but installing the package "ghostscript" 10.0.0~dfsg-4
requires installing the package libgs10. Installing the libgs9 package
prohibits installing the libgs10 package.

Decision:
1, removed the package "atril" 1.26.0-1, removed the package libgs9.
2. installed the libgs10 package, installed the "ghostscript" package 10.0.0
3. downloaded from "github.com/mate-desktop/atril " the source code of "atril".
4. built and installed "atril"

Everything works: both "ghostscript" 10.0.0~dfsg-4 and "atril" 1.26.

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 6.0.0-2-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages atril depends on:
ii  atril-common 1.26.0-1
ii  dconf-gsettings-backend [gsettings-backend]  0.40.0-3
ii  libatk1.0-0  2.46.0-3
pn  libatrildocument3
pn  libatrilview3
ii  libc62.35-4
ii  libcaja-extension1   1.26.1-1
ii  libgdk-pixbuf-2.0-0  2.42.9+dfsg-1
ii  libglib2.0-0 2.74.1-1
ii  libgtk-3-0   3.24.34-3
ii  libice6  2:1.0.10-1
ii  libsecret-1-00.20.5-3
ii  libsm6   2:1.2.3-1
ii  libxml2  2.9.14+dfsg-1+b1
ii  shared-mime-info 2.2-1

Versions of packages atril recommends:
ii  dbus-user-session [default-dbus-session-bus]  1.14.4-1
ii  gvfs  1.50.2-2

Versions of packages atril suggests:
pn  caja  
ii  poppler-data  0.4.11-1
pn  unrar 



Bug#1011091: Systems with more than 4 memory slots not supported yet, not instantiating SPD

2022-05-17 Thread Сергей Фёдоров
I have sent 4 emails to the addresses that you have informed me.
In what format should I inform BTS about this?



Bug#1011091: Systems with more than 4 memory slots not supported yet, not instantiating SPD

2022-05-16 Thread Сергей Фёдоров
Package: linux-source-5.17
Version: 5.17.6-1
Severity: normal

Dear Maintainer,


Problems:

I already wrote about it 07 Dec 2021 21:15:07 +
(https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D1001286 ),
but so far nothing has changed.

1. Systems with more than 4 memory slots not supported yet, not instantiating 
SPD.
Now I have made it so that the system sees 8 slots, as described below, but I 
do not see SPD.

2. Kingston memory slots do not appear on the I2C bus, although I see them in 
the BIOS and can
change their parameters. Nevertheless, Linux works fine.


# decode-dimms
# decode-dimms version 4.3-2

Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner,
Jean Delvare, Trent Piepho and others

No EEPROM found, the kernel probably does not support your hardware.


Motherboard Asus P9X79pro 2011 year
Chipset: Intel X79 Express Chipset

8 memory slots

8xDIMM. max 64 GB, DDR3 2400(O.C.)/2133(O.C.)/1866/1600/1033/1066 Mhz, non-ECC,
un-buffered memory

Quad channel memory architecture
Supports Intel Extreme Memory Profile (XMP)

Hyper DIMM support is subject to the physical characteristics of infividual 
CPUs.

Processor: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
Overclocked to 4.400 GHz with stepping 44.

For memory strips:
Kingston HyperX Fury HX316C10FRK2/16  2x8Gb
Kingston HyperX Fury HX316C10FWK2/16  2x8Gb
Kingston HyperX  KHX16C10B1R/84x8Gb

I believe there are enough motherboards with 8 memory slots.

Debian-11.3.0 64 Sid

Kernel: Linux Linux 5.17.6-1 SMP PREEMPT (SMP w/8 CPU threads) x86_64 GNU/Linux

Kernel driver i2c-i801
Intel Patsburg (PCH)


/var/log/messages

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

/var/log/syslog

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

/var/log/kern.log

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

Viewing log-in led to the idea that so far
Systems with more than 4 memory slots not supported yet, not instantiating SPD

I rebuilt the kernel by changing to 
"./linux-source-5.17.6-1/drivers/i2c/i2c-smbus.c"

line 358:
if (slot_count > 4) {
dev_warn(>dev,
 "Systems with more than 4 memory slots not supported 
yet, not instantiating SPD\n");
return;
}
на
replace with
if (slot_count > 8) {
dev_warn(>dev,
 "Systems with more than 8 memory slots not supported 
yet, not instantiating SPD\n");
return;
}

and now it is written in the logs:

May 12 23:22:33 A1 kernel: [4.094892] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
May 12 23:22:33 A1 kernel: [4.095301] i2c i2c-0: 8/8 memory slots populated 
(from DMI)

For some reason, at least one file is not created automatically in 
"/sys/bus/i2c/drivers/"
for I2C devices "/^\d+-[\da-f]+$/i" like 0-0050 or 2-0051
with a description of the memory parameters.


/etc/modules-load.d/:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# we use any of the following three to choose from
# eeprom at24 ee1004
eeprom
i2c_i801
i2c_smbus
i2c-dev


# lsmod | sort -u

aesni_intel   380928  0
ahci   49152  10
asus_wmi   61440  1 eeepc_wmi
autofs453248  2
battery28672  1 asus_wmi
button 24576  1 nouveau
cec61440  1 drm_kms_helper
configfs   57344  1
coretemp   20480  0
crc16  16384  1 ext4
crc32c_generic 16384  0
crc32c_intel   24576  18

Bug#1001286: linux: Systems with more than 4 memory slots not supported yet, not instantiating SPD

2022-05-16 Thread Сергей Фёдоров

I rebuilt the kernel with changing to 
"./linux-source-5.17.6-1/drivers/i2c/i2c-smbus.c"

line 358:
if (slot_count > 4) {
dev_warn(>dev,
 "Systems with more than 4 memory slots not supported 
yet, not instantiating SPD\n");
return;
}

replaced with
if (slot_count > 8) {
dev_warn(>dev,
 "Systems with more than 8 memory slots not supported 
yet, not instantiating SPD\n");
return;
}

and now it is written in the logs:

May 12 23:22:33 A1 kernel: [4.094892] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
May 12 23:22:33 A1 kernel: [4.095301] i2c i2c-0: 8/8 memory slots populated 
(from DMI)




Bug#1011069: decode-dimms does not detect SPD for kingston memory strips

2022-05-16 Thread Сергей Фёдоров
Package: i2c-tools
Version: 4.3-2
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,


Problems:

1. I want to see the contents of the SPD for each memory strip, but decode-dimms
(the i2c-tools 4.3-2 package) does not give this for this motherboard. But I see
it in the BIOS on computers boot and can change it.

2. Systems with more than 4 memory slots not supported yet, not instantiating 
SPD.
I solved this problem, which I described below.


# decode-dimms
# decode-dimms version 4.3-2

Memory Serial Presence Detect Decoder
By Philip Edelbrock, Christian Zuckschwerdt, Burkart Lingner,
Jean Delvare, Trent Piepho and others

No EEPROM found, the kernel probably does not support your hardware.


Motherboard Asus P9X79pro 2011 year
Chipset: Intel X79 Express Chipset

8 memory slots

8xDIMM. max 64 GB, DDR3 2400(O.C.)/2133(O.C.)/1866/1600/1033/1066 Mhz, non-ECC,
un-buffered memory

Quad channel memory architecture
Supports Intel Extreme Memory Profile (XMP)

Hyper DIMM support is subject to the physical characteristics of infividual 
CPUs.

Processor: Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
Overclocked to 4.400 GHz with stepping 44.

For memory strips:
Kingston HyperX Fury HX316C10FRK2/16  2x8Gb
Kingston HyperX Fury HX316C10FWK2/16  2x8Gb
Kingston HyperX  KHX16C10B1R/84x8Gb

I believe there are enough motherboards with 8 memory slots.

Debian-11.3.0 64 Sid

Kernel: Linux 5.17.0-2-amd64 (SMP w/8 CPU threads)
Linux 5.17.0-2-amd64 #1 SMP PREEMPT Debian 5.17.6-1 (2022-05-11) x86_64 
GNU/Linux

Kernel driver i2c-i801
Intel Patsburg (PCH)


./i2c-tools-4.3/eeprom/

line 2618
sub get_dimm_list
{
my (@drivers, $driver, $dir, $opened, $file, @files);

if ($use_sysfs) {
@drivers = ('eeprom',
'at24',
'ee1004');  # DDR4
} else {
@drivers = ('eeprom');
$dir = '/proc/sys/dev/sensors';
}

foreach $driver (@drivers) {
if ($use_sysfs) {
$dir = "/sys/bus/i2c/drivers/$driver";
}

next unless opendir(local *DIR, $dir);
$opened++;
while (defined($file = readdir(DIR))) {
if ($use_sysfs) {
# We look for I2C devices like 0-0050 or 2-0051
next unless $file =~ /^\d+-[\da-f]+$/i;
next unless -d "$dir/$file";

# Device name must be eeprom (driver eeprom)
# spd (driver at24) or ee1004 (driver ee1004)
my $attr = sysfs_device_attribute("$dir/$file", 
"name");
next unless defined $attr &&
($attr eq "eeprom" ||
 $attr eq "spd" ||
 $attr eq "ee1004");# DDR4
} else {
next unless $file =~ /^eeprom-/;
}
push @files, { eeprom => "$file",
   file => "$dir/$file",
   driver => "$driver" };
}
close(DIR);
}

if (!$opened) {
print STDERR "No EEPROM found, try loading the eeprom, at24 or 
ee1004 module\n";
exit;
}

return sort { $a->{file} cmp $b->{file} } @files;
}

/var/log/messages

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

/var/log/syslog

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

/var/log/kern.log

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported 

Bug#1010529: Problems with theme HighContrast in Debian 11.2 и 11.3 64-bits Xfce 4.16 DoubleCmd 1.0.5

2022-05-03 Thread Сергей Фёдоров
Package: libgtk-3-0
Version: 3.24.5-1
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

In Debian 11.2 and 11.3 64-bits Xfce 4.16, under the login of a "regular user"
, I encountered a strange thing: in DoubleCommander 1.0.5 or v.10177, with
xfce4-settings selected ("Applications→Settings→Appearance") linux-theme
"HighContrast (hicolor)" in black letters on a black background (i.e. nothing
is visible), the "Disk button panel" areas are displayed (only disk labels,
icons are normal, the hint field is normal), the "Disk List" area (only
disk labels, icons are normal, the hint field is normal), the "Status bar"
at the bottom of the left or right frame, "Directory path of the active panel"
to the left of the command line, the bottom line is the "Function Key bar"
and in some windows (not all). I haven't noticed anything in other applications
yet.

Under login "root" everything is displayed normally.

Under the login of the "ordinary user" I chose the theme "Adwaita" and
everything began to be displayed in DC normally, only in the upper and lower
panels the background became dark in Desktop Xfce.

Installed Debian 10.12.0. Installed DoubleCommander. Launched it. Everything
is displayed normally.
libgtk-3-0 version: 3.24.33

In Debian 11.2 and 11.3, Double Commander already has a problem with
the HighContrast theme.
Debian 11.3 has libgtk-3-0 version installed: 3.24.5-1.

For Debian 11.3 from "https://www.xfce-look.org; downloaded the light gray theme
"Redstar-greybird+gtk32" (https://www.xfce-look.org/p/1208044 )
("jayu-mon"), which is similar to "HighContrast", but unlike it is normally
displayed in DC.

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.17.0-1-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages libgtk-3-0 depends on:
ii  adwaita-icon-theme   42.0-2
ii  hicolor-icon-theme   0.17-2
ii  libatk-bridge2.0-0   2.38.0-4
ii  libatk1.0-0  2.38.0-1
ii  libc62.33-7
ii  libcairo-gobject21.16.0-5
ii  libcairo21.16.0-5
ii  libcolord2   1.4.6-1
ii  libcups2 2.4.1op1-2
ii  libepoxy01.5.10-1
ii  libfontconfig1   2.13.1-4.4
ii  libfribidi0  1.0.8-2.1
ii  libgdk-pixbuf-2.0-0  2.42.8+dfsg-1
ii  libglib2.0-0 2.72.1-1
ii  libgtk-3-common  3.24.33-1
ii  libharfbuzz0b2.7.4-1+b1
ii  libpango-1.0-0   1.50.6+ds-2
ii  libpangocairo-1.0-0  1.50.6+ds-2
ii  libpangoft2-1.0-01.50.6+ds-2
ii  libwayland-client0   1.20.0-1
ii  libwayland-cursor0   1.20.0-1
ii  libwayland-egl1  1.20.0-1
ii  libx11-6 2:1.7.5-1
ii  libxcomposite1   1:0.4.5-1
ii  libxcursor1  1:1.2.1-1
ii  libxdamage1  1:1.1.5-2
ii  libxext6 2:1.3.4-1
ii  libxfixes3   1:6.0.0-1
ii  libxi6   2:1.8-1
ii  libxinerama1 2:1.1.4-3
ii  libxkbcommon01.4.0-1
ii  libxrandr2   2:1.5.2-2+b1
ii  shared-mime-info 2.2-1

Versions of packages libgtk-3-0 recommends:
ii  libgtk-3-bin 3.24.33-1
ii  librsvg2-common  2.52.5+dfsg-3+b1

Versions of packages libgtk-3-0 suggests:
ii  gvfs  1.50.0-1

Versions of packages libgtk-3-0 is related to:
pn  appmenu-gtk3-module   
pn  fcitx-frontend-gtk3   
pn  gcin-gtk3-immodule
pn  gtk-vector-screenshot 
pn  gtk3-engines-xfce 
pn  gtk3-im-libthai   
pn  hime-gtk3-immodule
pn  ibus-gtk3 
pn  imhangul-gtk3 
ii  libcanberra-gtk3-module   0.30-10
pn  libcaribou-gtk3-module
pn  libgtk3-nocsd0
pn  maliit-inputcontext-gtk3  
pn  packagekit-gtk3-module
pn  scim-gtk-immodule 
pn  topmenu-gtk3  
pn  uim-gtk3  
pn  uim-gtk3-immodule 

-- no debconf information



Bug#1010499: Problems with theme HighContrast in Debian 11.2 и 11.3 64-bits Xfce 4.16 DoubleCmd 1.0.5

2022-05-02 Thread Сергей Фёдоров
Package: gnome-accessibility-themes
Version: 3.28-1
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

In Debian 11.2 and 11.3 64-bits Xfce 4.16, under the login of a "regular user"
, I encountered a strange thing: when running DoubleCommander with
xfce4-settings selected ("Applications→Settings→Appearance") linux-theme
"HighContrast (hicolor)" in black letters on a black background (i.e. nothing
is visible), the "Disk button panel" areas are displayed (only disk labels,
icons are normal, the hint field is normal), the "Disk List" area (only
disk labels, icons are normal, the hint field is normal), the "Status bar"
at the bottom of the left or right frame, "Directory path of the active panel"
to the left of the command line, the bottom line is the "Function Key bar"
and in some windows (not all). I haven't noticed anything in other applications
yet.

Under login "root" everything is displayed normally.

Under the login of the "ordinary user" I chose the theme "Adwaita" and
everything began to be displayed in DC normally, only in the upper and lower
panels the background became dark in Desktop Xfce.

Installed Debian 10.12.0. Installed DoubleCommander. Launched it. Everything
is displayed normally.

There is clearly a problem with the HighContrast theme in Debian 11.2 and 11.3.

For Debian 11.3 from "https://www.xfce-look .org" downloaded the light gray 
theme
"Redstar-greybird+gtk32" (https://www.xfce-look.org/p/1208044 ) 
("jayu-mon"),
which is similar to "HighContrast", but unlike it is normally displayed in DC.

Platform: x86_64-Linux-gtk2
Widgetset library: GTK 2.24.33

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.17.0-1-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

-- no debconf information



Bug#1010450: Problems with theme HighContrast in Debian 11.2 и 11.3 64-bits Xfce 4.16 DoubleCmd 1.0.5

2022-05-01 Thread Сергей Фёдоров


Package: hicolor-icon-theme
Version: 0.17-2
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

In Debian 11.2 and 11.3 64-bits Xfce 4.16, under the login of a "regular user"
, I encountered a strange thing: when running DoubleCommander with
xfce4-settings selected ("Applications→Settings→Appearance") linux-theme
"HighContrast (hicolor)" in black letters on a black background (i.e. nothing
is visible), the "Disk button panel" areas are displayed (only disk labels,
icons are normal, the hint field is normal), the "Disk List" area (only
disk labels, icons are normal, the hint field is normal), the "Status bar"
at the bottom of the left or right frame, "Directory path of the active panel"
to the left of the command line, the bottom line is the "Function Key bar"
and in some windows (not all). I haven't noticed anything in other applications
yet.

Under login "root" everything is displayed normally.

Under the login of the "ordinary user" I chose the theme "Adwaita" and
everything began to be displayed in DC normally, only in the upper and lower
panels the background became dark in Desktop Xfce.

Installed Debian 10.12.0. Installed DoubleCommander. Launched it. Everything
is displayed normally.

There is clearly a problem with the HighContrast theme in Debian 11.2 and 11.3.

Platform: x86_64-Linux-gtk2
Widgetset library: GTK 2.24.33

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.17.0-1-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

-- no debconf information



Bug#1010208: xfce4-datetime-plugin: icon xfce-schedule is absent

2022-04-26 Thread Сергей Фёдоров
Package: xfce4-datetime-plugin
Version: 0.8.1-1
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

I have xfce4 v.4.16.

In the source code folder in "panel-plugin/datetime.desktop" there is a line:

Icon=xfce-schedule

but the "xfce-schedule" icon itself has been absenting from the very beginning 
to this day.
Because of this, for example, in the "Panel->Add new elements"
line "Date and time" is displayed without an icon.

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.17.0-1-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xfce4-datetime-plugin depends on:
ii  libc62.33-7
ii  libglib2.0-0 2.72.1-1
ii  libgtk-3-0   3.24.33-1
ii  libpango-1.0-0   1.50.6+ds-2
ii  libxfce4panel-2.0-4  4.16.4-1
ii  libxfce4ui-2-0   4.16.1-1
ii  libxfce4util74.16.0-1

xfce4-datetime-plugin recommends no packages.

xfce4-datetime-plugin suggests no packages.

-- no debconf information



Bug#1010206: xfce4-datetime-plugin: icon xfce-schedule is nonexistent

2022-04-26 Thread Сергей Фёдоров
Package: xfce4
Version: 4.14
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

In the source code folder in "panel-plugin/datetime.desktop" there is a line:

Icon=xfce-schedule

but the "xfce-schedule" icon itself has been absenting from the very beginning 
to this day.
Because of this, for example, in the "Panel->Add new elements"
line "Date and time" is displayed without an icon.

-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.17.0-1-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xfce4-datetime-plugin depends on:
ii  libc62.33-7
ii  libglib2.0-0 2.72.1-1
ii  libgtk-3-0   3.24.33-1
ii  libpango-1.0-0   1.50.6+ds-2
ii  libxfce4panel-2.0-4  4.16.4-1
ii  libxfce4ui-2-0   4.16.1-1
ii  libxfce4util74.16.0-1

xfce4-datetime-plugin recommends no packages.

xfce4-datetime-plugin suggests no packages.

-- no debconf information



Bug#1001286: linux: Systems with more than 4 memory slots not supported yet, not instantiating SPD

2021-12-07 Thread Сергей Фёдоров


Source: linux
Version: 5.10.46-4
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,



/var/log/messages

Dec  2 06:51:04 A1 kernel: [1.349519] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  2 06:51:04 A1 kernel: [1.350413] i2c i2c-0: 8/8 memory slots populated 
(from DMI)
Dec  2 06:51:04 A1 kernel: [1.350416] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

/var/log/syslog

Dec  2 22:12:57 A1 kernel: [1.341085] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  2 22:12:57 A1 kernel: [1.341467] i2c i2c-0: 8/8 memory slots populated 
(from DMI)
Dec  2 22:12:57 A1 kernel: [1.341470] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

/var/log/kern.log

Dec  2 22:12:57 A1 kernel: [1.341085] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  2 22:12:57 A1 kernel: [1.341467] i2c i2c-0: 8/8 memory slots populated 
(from DMI)
Dec  2 22:12:57 A1 kernel: [1.341470] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

Dec  3 05:28:15 A1 kernel: [1.322527] i801_smbus :00:1f.3: SMBus using 
PCI interrupt
Dec  3 05:28:15 A1 kernel: [1.322911] i2c i2c-0: 4/8 memory slots populated 
(from DMI)
Dec  3 05:28:15 A1 kernel: [1.322914] i2c i2c-0: Systems with more than 4 
memory slots not supported yet, not instantiating SPD

Viewing log-in led to the idea that so far
Systems with more than 4 memory slots not supported yet, not instantiating SPD

Is it possible to remove this restriction for "8 memory slots"?



For memory strips:
Kingston HyperX  KHX16C10B1R/8
Kingston HyperX Fury HX316C10FRK2/16
Kingston HyperX Fury HX316C10FWK2/16

For Debian-11.1.0 64 Sid

/etc/modules-load.d/:
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# we use any of the following three to choose from
# eeprom at24 ee1004
at24
i2c_i801
i2c_smbus
i2c-dev


# i2cdetect -l

i2c-0   smbus   SMBus I801 adapter at f000  SMBus adapter
i2c-1   i2c nvkm-:01:00.0-bus-  I2C adapter
i2c-2   i2c nvkm-:01:00.0-bus-0001  I2C adapter
i2c-3   i2c nvkm-:01:00.0-bus-0002  I2C adapter

For some reason, at least one file is not created automatically in 
"/sys/bus/i2c/drivers/"
"0-0050" ... "0-0057"
 ...
"3-0050" ... "3-0057"
with a description of the memory parameters.


i2cdetect -y 0
 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: 08 -- -- -- -- -- -- --
10: 10 11 -- -- 14 15 -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --


# i2cdetect -y 1
 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- 37 -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --


# i2cdetect -y 2
 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --


# i2cdetect -y 3
 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: -- -- 

Bug#998083: e2fsprogs: e4defrag hangs up the computer

2021-10-29 Thread Сергей Фёдоров


Package: e2fsprogs
Version: 1.46.4-1
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

It was necessary to defragment a 2 Tb disk with 15,592,612 files.

With a 32 Gb swap file, the computer froze somewhere at 9,000,000.
With a 64 Gb swap file, the computer froze somewhere at 14,500,000.
With a 94 Gb swap file, it finally ended normally without
the computer freezing.

It would like e4defrag to send a message about this when there is a lack
of memory, give advice on how to overcome this problem, and not hang up
the computer.


-- System Information:
Debian Release: bookworm/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.14.0-3-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages e2fsprogs depends on:
ii  libblkid12.37.2-4
ii  libc62.32-4
ii  libcom-err2  1.46.4-1
ii  libext2fs2   1.46.4-1
ii  libss2   1.46.4-1
ii  libuuid1 2.37.2-4
ii  logsave  1.46.4-1

Versions of packages e2fsprogs recommends:
pn  e2fsprogs-l10n  

Versions of packages e2fsprogs suggests:
pn  e2fsck-static  
pn  fuse2fs
ii  gpart  1:0.3-9
ii  parted 3.4-1

-- no debconf information
   



Bug#981815: sudo: problems with xargs & parallel

2021-02-04 Thread Сергей Фёдоров
Package: sudo
X-Debbugs-Cc: serfyo...@yandex.ru
Version: 1.9.5p2-2
Severity: normal

Dear Maintainer,


install_manifest.txt:

/usr/local/test/test 1.txt
/usr/local/test/test 2.txt
--Bad--
t.sh:
sudo xargs -0t -d '\n' -a 'install_manifest.txt' /usr/bin/rm

u1@A1:2$ ./t.sh
xargs -0t -d '\n' -a 'install_manifest.txt' /usr/bin/rm

/etc/sudoers.d/f1:30:49: syntax error
u1 A1 = (root) NOPASSWD: /usr/bin/xargs -0t -d '\n' /usr/bin/rm < 
install_manifest.txt
  ^
[sudo] password for u1:
sudo: a password is required
---Bad-
/etc/sudoers.d/
u1 A1 = (root) NOPASSWD: /usr/bin/xargs -0t -d '\\n' /usr/bin/rm < 
install_manifest.txt

sudo xargs -t -d '\\n' /usr/bin/rm < install_manifest.txt
[sudo] пароль для u1:
Sorry, user u1 is not allowed to execute '/usr/bin/xargs -t -d \\n /usr/bin/rm' 
as root on A1.
---Bad-
/etc/sudoers.d/
u1 A1 = (root) NOPASSWD: /usr/bin/xargs -0t -d "\\n" /usr/bin/rm < 
install_manifest.txt

u1@A1:2$ sudo xargs -t -d "\\n" /usr/bin/rm < install_manifest.txt
[sudo] password for u1:
Sorry, user u1 is not allowed to execute '/usr/bin/xargs -t -d \n /usr/bin/rm' 
as root on A1.
---Ok
root@A1:/media/u1/s1/2# parallel -t -d '\n' /usr/bin/rm < install_manifest.txt
/usr/bin/rm /usr/local/test/test\ 1.txt
/usr/bin/rm /usr/local/test/test\ 2.txt
root@A1:/media/u1/s1/2#
---Ok-
root@A1:/media/u1/s1/2# parallel -0t -d '\n' /usr/bin/rm < install_manifest.txt
/usr/bin/rm /usr/local/test/test\ 1.txt
/usr/bin/rm /usr/local/test/test\ 2.txt
root@A1:/media/u1/s1/2#
---Ok-
root@A1:/media/u1/s1/2# xargs -t -d '\n' /usr/bin/rm < install_manifest.txt
/usr/bin/rm '/usr/local/test/test 1.txt' '/usr/local/test/test 2.txt'
root@A1:/media/u1/s1/2#
---Ok-
root@A1:/media/u1/s1/2# xargs -0t -d '\n' /usr/bin/rm < install_manifest.txt
/usr/bin/rm /usr/local/test/test\ 1.txt
/usr/bin/rm /usr/local/test/test\ 2.txt
root@A1:/media/u1/s1/2#
---Ok-
/etc/sudoers.d/
u1 A1 = (root) NOPASSWD: ALL

u1@A1:2$ sudo xargs -t -d '\n' /usr/bin/rm < install_manifest.txt
/usr/bin/rm '/usr/local/test/test 1.txt' '/usr/local/test/test 2.txt'
u1@A1:2$
---Ok-
/etc/sudoers.d/
u1 A1 = (root) NOPASSWD: ALL

u1@A1:2$ sudo parallel -t -d '\n' /usr/bin/rm < install_manifest.txt
/usr/bin/rm /usr/local/test/test\ 1.txt
/usr/bin/rm /usr/local/test/test\ 2.txt
u1@A1:2$
---Ok-
/etc/sudoers.d/
u1 A1 = (root) NOPASSWD: ALL

u1@A1:2$ ./t.sh
sudo xargs -t -d '\n' /usr/bin/rm < install_manifest.txt

u1@A1:2$ ./t.sh
/usr/bin/rm '/usr/local/test/test 1.txt' '/usr/local/test/test 2.txt'
u1@A1:2$
---Ok-
/etc/sudoers.d/
u1 A1 = (root) NOPASSWD: ALL

u1@A1:2$ ./t.sh
sudo parallel -t -d '\n' /usr/bin/rm < install_manifest.txt

u1@A1:2$ ./t.sh
/usr/bin/rm /usr/local/test/test\ 1.txt
/usr/bin/rm /usr/local/test/test\ 2.txt
u1@A1:2$


-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-3-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages sudo depends on:
ii  libaudit1   1:3.0-2
ii  libc6   2.31-9
ii  libpam-modules  1.4.0-4
ii  libpam0g1.4.0-4
ii  libselinux1 3.1-2+b2
ii  lsb-base11.1.0
ii  zlib1g  1:1.2.11.dfsg-2

sudo recommends no packages.

sudo suggests no packages.

-- Configuration Files:
/etc/sudo.conf changed:
Debug sudo /var/log/sudo_debug all@debug

/etc/sudoers [Errno 13] Access denied: '/etc/sudoers'
/etc/sudoers.d/README [Errno 13] Access denied: '/etc/sudoers.d/README'

-- no debconf information



Bug#979862: fp-compiler-3.2.0+dfsg-9 error when installing

2021-01-11 Thread Сергей Фёдоров
Package: fp-compiler-3.2.0
Version: 3.2.0+dfsg-9
Severity: important
Tags: patch
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

Packet:
fp-compiler-3.2.0_3.2.0+dfsg-9_amd64.deb
   control.tar.xz
  postinst
line
--slave ${MAN_DIR}/fpcres.1.gz fpcres.1.gz ${MAN_DIR}/fpcres-3.2.0.1.gz
must be
--slave ${MAN_DIR}/fpcres.1.gz fpcres.1.gz ${MAN_DIR}/fpcres-3.2.0.1.gz 
\
otherwise the next line
--slave ${MAN_DIR}/fpcmkcfg.1.gz fpcmkcfg.1.gz 
${MAN_DIR}/fpcmkcfg-3.2.0.1.gz
is not executed and the installation of the package gives an error.

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.10.0-1-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages fp-compiler-3.2.0 depends on:
ii  binutils   2.35.1-7
ii  debconf [debconf-2.0]  1.5.74
ii  fp-units-rtl-3.2.0 3.2.0+dfsg-9
ii  libc6  2.31-9

Versions of packages fp-compiler-3.2.0 recommends:
ii  fp-utils-3.2.0  3.2.0+dfsg-9

Versions of packages fp-compiler-3.2.0 suggests:
ii  fp-docs-3.2.0  3.2.0+dfsg-9

-- debconf information:
  fp-compiler/rename_cfg: true
  fp-compiler/windres-select: Select manually
  fp-compiler/windres: Select manually
  



Bug#976158: nginx: need to replace nginx.net on nginx.org

2020-11-30 Thread Сергей Фёдоров


Package: nginx
Version: 1.18.0-6
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

Maybe should replace nginx in the package descriptions
   "Homepage: https://nginx.net; on "http://nginx.org/;,
otherwise get an error message when viewing the site.

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.9.0-4-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages nginx depends on:
ii  nginx-core  1.18.0-6+b1

nginx recommends no packages.

nginx suggests no packages.

-- no debconf information



Bug#975351: pascal 3.2.0 - installation errors for Lazarus 2.1.0

2020-11-20 Thread Сергей Фёдоров


Package: fpc-3.2.0
Version: 3.2.0+dfsg-8
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

After installing "pascal 3.2.0" for
  " /usr/bin/x86_64-linux-gnu-fpcmkcfg-3.2.0"
the fpcmkcfg symlink is not created,
and this name is used in
  " /usr/lib/x86_64-linux-gnu/fpc/3.2.0/samplecfg "
when creating"FPCMKCFGBIN".

Adding into the "fp-compiler-3.2.0_3.2.0+dfsg-9_amd64.deb" package lines
to "postinst" file
  --slave /usr/bin/fpcmkcfg fpcmkcfg /usr/bin/x86_64-linux-gnu-fpcmkcfg-3.2.0

into

# add alternatives
update-alternatives \
--install /usr/bin/fpc fpc /usr/bin/x86_64-linux-gnu-fpc-3.2.0 302 \
--slave /usr/bin/ppcx64 ppcx64 ${LIB_DIR}/3.2.0/ppcx64 \
--slave /usr/bin/fpc-depends fpc-depends /usr/bin/fpc-depends-3.2.0 \
--slave /usr/bin/fpcres fpcres /usr/bin/x86_64-linux-gnu-fpcres-3.2.0 \
--slave ${MAN_DIR}/ppcx64.1.gz ppcx64.1.gz ${MAN_DIR}/ppcx64-3.2.0.1.gz \
--slave ${MAN_DIR}/fpc.1.gz fpc.1.gz ${MAN_DIR}/fpc-3.2.0.1.gz \
--slave ${MAN_DIR}/fpc-depends.1.gz fpc-depends.1.gz 
${MAN_DIR}/fpc-depends-3.2.0.1.gz \
--slave ${MAN_DIR}/fpcres.1.gz fpcres.1.gz ${MAN_DIR}/fpcres-3.2.0.1.gz

and
   ${LIB_DIR}/3.2.0/samplecfg ${LIB_DIR}/3.2.0
at the end of the "postinst" file solves this problem.

Also need to replace some links in "samplecfg" :

#FPCBIN=`dirname "$1"`/../../bin/fpc
FPCBIN='/usr/bin/fpc'
#FPBIN=`dirname "$1"`/../../bin/fp
FPBIN='/usr/bin/fp'
#FPPKGBIN=`dirname "$1"`/../../bin/fppkg
FPPKGBIN='/usr/bin/fppkg'
#FPCMKCFGBIN=`dirname "$1"`/../../bin/fpcmkcfg
FPCMKCFGBIN='/usr/bin/fpcmkcfg'
#SHAREPATH=`dirname "$1"`/../../share/fpc/\$fpcversion
SHAREPATH="/usr/share/fpcsrc/\$fpcversion"

# set right path to FPC with $fpcversion
#FPCPATH=`dirname "$1"`/\$fpcversion
FPCPATH=/usr/lib/x86_64-linux-gnu/fpc/\$fpcversion
# set right prefix to FPC
#FPCGLOBALPATH=`dirname "$1"`
FPCGLOBALPATH=/usr/lib/x86_64-linux-gnu/fpc
#FPCGLOBALPREFIX="$FPCGLOBALPATH"/../../
FPCGLOBALPREFIX=/usr/

otherwise, after installing "Lazarus 2.1.0", an error occurs when starting it
with an unintelligible description for "fppkg" (for "Lazarus" 2.0.10+dfsg-4
"fppkg" is not used).

And files should be created in $HOME with this content:

.config
  fppkg.cfg

[Defaults]
ConfigVersion=5
InstallRepository=user
LocalRepository={UserDir}.fppkg/
BuildDir={LocalRepository}build/
ArchivesDir={LocalRepository}archives/
Downloader=FPC
CompilerConfig=default
FPMakeCompilerConfig=default
CompilerConfigDir=/etc/fppkg
RemoteMirrors=https://www.freepascal.org/repository/mirrors.xml
RemoteRepository=auto

[Repository]
Name=fpc
Description=Packages which are installed along with the Free Pascal Compiler
Path=/usr/lib/x86_64-linux-gnu/fpc/{CompilerVersion}/
Prefix=/usr/

#[IncludeFiles]
#FileMask=/etc/fppkgconf.d/*.conf

[Repository]
Name=user
Description=User-installed packages
Path={LocalRepository}lib/fpc/{CompilerVersion}
Prefix={LocalRepository}

.fppkg
  config
default

[Defaults]
ConfigVersion=5
GlobalPrefix=/usr/
LocalPrefix={LocalRepository}
GlobalInstallDir={GlobalPrefix}lib/x86_64-linux-gnu/fpc/{CompilerVersion}/
LocalInstallDir={LocalPrefix}lib/fpc/{CompilerVersion}/
Compiler=/usr/bin/fpc
OS=linux
CPU=x86_64
Version=3.2.0


or not created at all.


-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.9.0-2-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages fpc-3.2.0 depends on:
ii  fp-compiler-3.2.0  3.2.0+dfsg-8
ii  fp-ide-3.2.0   3.2.0+dfsg-8
ii  fp-units-base-3.2.03.2.0+dfsg-8
ii  fp-units-db-3.2.0  3.2.0+dfsg-8
ii  fp-units-fcl-3.2.0 3.2.0+dfsg-8
ii  fp-units-fv-3.2.0  3.2.0+dfsg-8
ii  fp-units-gfx-3.2.0 3.2.0+dfsg-8
ii  fp-units-gtk2-3.2.03.2.0+dfsg-8
ii  fp-units-math-3.2.03.2.0+dfsg-8
ii  fp-units-misc-3.2.03.2.0+dfsg-8
ii  fp-units-multimedia-3.2.0  3.2.0+dfsg-8
ii  fp-units-net-3.2.0 3.2.0+dfsg-8
ii  fp-units-rtl-3.2.0 3.2.0+dfsg-8

Versions of packages fpc-3.2.0 recommends:
ii  fp-utils-3.2.0  3.2.0+dfsg-8

Versions of packages fpc-3.2.0 suggests:
ii  fp-docs-3.2.0  3.2.0+dfsg-8
pn  lazarus

-- no debconf information



Bug#975298: Xfce 4.14 5 seconds for the first click on the "Applications" button

2020-11-20 Thread Сергей Фёдоров


Package: xfce4
Version: 4.14
Severity: normal
Tags: patch


Dear Maintainer,

In Xfce 4.14, the response time to the first click on the "Applications" button
takes 5 seconds. Subsequent clicks are triggered instantly. In Xfce 4.12,
the first click is triggered instantly.

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.9.0-2-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xfce4 depends on:
ii  libxfce4ui-utils 4.14.1-1+b1
ii  thunar   1.8.15-1
ii  xfce4-appfinder  4.14.0-1+b1
ii  xfce4-panel  4.14.4-1
ii  xfce4-pulseaudio-plugin  0.4.3-1
ii  xfce4-session4.14.2-2
ii  xfce4-settings   4.14.2-1
ii  xfconf   4.14.3-2
ii  xfdesktop4   4.14.3-1
ii  xfwm44.14.6-1

Versions of packages xfce4 recommends:
ii  desktop-base  10.0.3
ii  tango-icon-theme  0.8.90-8
ii  thunar-volman 0.9.5-1+b1
ii  xfce4-notifyd 0.6.1-1
ii  xorg  1:7.7+21

Versions of packages xfce4 suggests:
ii  xfce4-goodies4.14.0
ii  xfce4-power-manager  1.6.6-1

-- no debconf information 



Bug#974790: synaptic 0.90.1 unreadable characters in columns component, size, size of uploaded files

2020-11-14 Thread Сергей Фёдоров


Package: synaptic
Version: 0.90.1
Severity: normal
X-Debbugs-Cc: serfyo...@yandex.ru

Dear Maintainer,

For installed packages, see in the columns:
component,   size,   size of uploaded files
�U �007F  �007F

In other columns everything is fine.

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.9.0-2-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages synaptic depends on:
ii  hicolor-icon-theme  0.17-2
ii  libapt-pkg6.0   2.1.11
ii  libc6   2.31-4
ii  libept1.6.0 1.2+b1
ii  libgcc-s1   10.2.0-17
ii  libgdk-pixbuf2.0-0  2.40.0+dfsg-5
ii  libglib2.0-02.66.2-1
ii  libgtk-3-0  3.24.23-2
ii  libpango-1.0-0  1.46.2-3
ii  libstdc++6  10.2.0-17
ii  libvte-2.91-0   0.62.1-1
ii  libxapian30 1.4.17-1
ii  policykit-1 0.105-29

Versions of packages synaptic recommends:
ii  libgtk3-perl  0.037-1
ii  xdg-utils 1.1.3-2

Versions of packages synaptic suggests:
pn  apt-xapian-index 
pn  deborphan
pn  dwww 
pn  menu 
pn  software-properties-gtk  
ii  tasksel  3.60

-- no debconf information



Bug#969224: cdimage.debian.org: Error installing Debian 10.5 from flash stick with Extlinux

2020-08-30 Thread Сергей Фёдоров


Package: cdimage.debian.org
Severity: critical
Justification: breaks the whole system

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.7.0-3-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

In both cases, when installing Debian from a flash drive, I received the 
message:

Load installer components from an ISO installer.

No modules were found. This pfobably is due to a mismatch between the kernel
by this version of the installer and the kernel version available in the
archieve.

and the installation had to be stopped.

I think the problem is that the kernel versions for DVD and
installer-amd64/current/images/hd-media/ or
installer-amd64/current/images/hd-media/gtk/
в initrd.gz
for Debian 10.4 and Debian 10.5
don't match.

for Debian 10.5
4.19.0-10 - the kernel versions for DVD
4.19.0-5  - the kernel versions for
http://ftp.nl.debian.org/debian/dists/Debian10.5/main/installer-amd64/current/images/hd-media/
or (for GTK)
http://ftp.nl.debian.org/debian/dists/Debian10.5/main/installer-amd64/current/images/hd-media/gtk/

Для Debian 10.4
4.19.0-9 - the kernel versions for с DVD
4.19.0-5 - the kernel versions for
http://ftp.nl.debian.org/debian/dists/Debian10.4/main/installer-amd64/current/images/hd-media/
or (for GTK)
http://ftp.nl.debian.org/debian/dists/Debian10.4/main/installer-amd64/current/images/hd-media/gtk/

Для Debian 10.3
4.19.0-8 - the kernel versions for с DVD
4.19.0-8 - the kernel versions for
http://ftp.nl.debian.org/debian/dists/Debian10.3/main/installer-amd64/current/images/hd-media/
or (for GTK)
http://ftp.nl.debian.org/debian/dists/Debian10.3/main/installer-amd64/current/images/hd-media/gtk/

For Debian 10.3 everything was established without problems.



Bug#969224: cdimage.debian.org: Error installing Debian 10.5 from flash stick with Extlinux

2020-08-29 Thread Сергей Фёдоров
Package: cdimage.debian.org
Severity: critical
Justification: breaks the whole system



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.7.0-3-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Created a USB flach stick using the" gparted " MBR-partition table.
GPT-partition table failed to get a working version of the Debian installation.
Created an Ext4-partition and its label. Set the partition "boot" attribute.

Created a bootable flash drive:

# dd conv=notrunc bs=440 count=1 if=/usr/lib/EXTLINUX/mbr. bin of=/dev/xxx
where xxx is the name of the u-VA, for example, sdf.
# extlinux --install "folder path" (for example " /media/u1/UP1/"), where" UP1 
" is partition name

For Debian 10.4 copied from a folder:

http://ftp.nl.debian.org/debian/dists/Debian10.4/main/installer-amd64/current/images/hd-media/
or from (for GTK)
http://ftp.nl.debian.org/debian/dists/Debian10.4/main/installer-amd64/current/images/hd-media/gtk/

vmlinuz
initrd.gz

and copied "debian-10.4.0-amd64-DVD-1.iso"

or

For Debian 10.5 copied from the folder:

http://ftp.nl.debian.org/debian/dists/Debian10.5/main/installer-amd64/current/images/hd-media/
or from (for GTK)
http://ftp.nl.debian.org/debian/dists/Debian10.5/main/installer-amd64/current/images/hd-media/gtk/

vmlinuz
initrd.gz

and copied "debian-10.5.0-amd64-DVD-1.iso»

In both cases, when installing Debian from a flash drive, I received the 
message:

Load installer components from an ISO installer.

No modules were found. This pfobably is due to a mismatch between the kernel
by this version of the installer and the kernel version available in the
archieve.

and the installation had to be stopped.

For Debian 10.3 copied from the folder:

http://ftp.nl.debian.org/debian/dists/Debian10.3/main/installer-amd64/current/images/hd-media/
or from (for GTK)
http://ftp.nl.debian.org/debian/dists/Debian10.3/main/installer-amd64/current/images/hd-media/gtk/

vmlinuz
initrd.gz

and copied "debian-10.3.0-amd64-DVD-1.iso"

and everything was established without problems.

Copy Debian 10.3, 10.4, and 10.5 to a USB stick in the device root, download
with it, the installation of Debian passes without problems.

For example:

dd if="./debian-10.5.0-amd64-DVD-1.iso" of=/dev/xxx bs=1M status=progress
where xxx is the name of the u-VA, for example, sdf.

Installing Debian 10.3, 10.4, and 10.5 from a DVD does not cause these problems.



Bug#968042: upgrading packet python2 from 2.7.17-2 up to 2.7.18-2 asks packets deletion

2020-08-07 Thread Сергей Фёдоров


Package: python2
Version: 2.7.17-2
Severity: normal
Tags: a11y



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.7.0-2-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages python2 depends on:
ii  libpython2-stdlib  2.7.17-2
ii  python2-minimal2.7.17-2
ii  python2.7  2.7.18-1

python2 recommends no packages.

Versions of packages python2 suggests:
pn  python-tk
pn  python2-doc  

-- no debconf information

I use synaptic 0.90+nmu1 to manage the packets database.

Upgrading off package python2 from 2.7.17-2 to 2.7.18-2
for some reason, it needs to delete packages:

libpython-stdlib
python
python-minimal
python-talloc   



Bug#966340: cpp-10 10.2.0-3 requires the removal of llvm-9

2020-07-27 Thread Сергей Фёдоров
Package: cpp-10
Version: 10.2.0-3
Severity: normal
Tags: a11y

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.7.0-2-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages cpp-10 depends on:
ii  gcc-10-base  10.1.0-6
ii  libc62.31-2
ii  libgmp10 2:6.2.0+dfsg-6
ii  libisl22 0.22.1-1
ii  libmpc3  1.1.0-1
ii  libmpfr6 4.1.0-3
ii  libzstd1 1.4.5+dfsg-3
ii  zlib1g   1:1.2.11.dfsg-2

cpp-10 recommends no packages.

Versions of packages cpp-10 suggests:
pn  gcc-10-locales  

-- no debconf information

Upgrading off package cpp-10 from 10.1.0-6 to 10.2.0-3
requires the removal of packages:

clang  1:9.0-49.1
clang-91:9.0.1-13
clang-tidy 1:9.0-49.1
clang-tidy-9   1:9.0.1-13
clang-tools-9  1:9.0.1-13
libobjc-9-dev  9.3.0-16
libobjc4   10.1.0-6

But if you only update the inkscape package from version 1.0-3 to 1.0-4 then
the following above, clang-9 packages are not deleted, but:

These packages are deleted:
libgc1c2

These packages are updated:
asymptote (2.66-1) to 2.66-1+b1
cpp-10 (10.1.0-6) to 10.2.0-3
g++-10 (10.1.0-6) to 10.2.0-3
gcc-10 (10.1.0-6) to 10.2.0-3
gcc-10-base (10.1.0-6) to 10.2.0-3
inkscape (1.0-3) to 1.0-4
lib32gcc-s1 (10.1.0-6) to 10.2.0-3
lib32stdc++6 (10.1.0-6) to 10.2.0-3
libasan6 (10.1.0-6) to 10.2.0-3
libatomic1 (10.1.0-6) to 10.2.0-3
libcc1-0 (10.1.0-6) to 10.2.0-3
libgcc-10-dev (10.1.0-6) to 10.2.0-3
libgcc-s1 (10.1.0-6) to 10.2.0-3
libgfortran5 (10.1.0-6) to 10.2.0-3
libgomp1 (10.1.0-6) to 10.2.0-3
libitm1 (10.1.0-6) to 10.2.0-3
liblsan0 (10.1.0-6) to 10.2.0-3
libobjc4 (10.1.0-6) to 10.2.0-3
libquadmath0 (10.1.0-6) to 10.2.0-3
libstdc++-10-dev (10.1.0-6) to 10.2.0-3
libstdc++6 (10.1.0-6) to 10.2.0-3
libtsan0 (10.1.0-6) to 10.2.0-3
libubsan1 (10.1.0-6) to 10.2.0-3

These packages are installed:
libgc1 (1:8.0.4-1)

What is the connection?



Bug#966340: cpp-10 10.2.0-3 requires the removal of llvm-9

2020-07-27 Thread Сергей Фёдоров
Package: cpp-10
Version: 10.2.0-3
Severity: normal
Tags: a11y

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.7.0-2-amd64 (SMP w/8 CPU threads)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages cpp-10 depends on:
ii  gcc-10-base  10.1.0-6
ii  libc62.31-2
ii  libgmp10 2:6.2.0+dfsg-6
ii  libisl22 0.22.1-1
ii  libmpc3  1.1.0-1
ii  libmpfr6 4.1.0-3
ii  libzstd1 1.4.5+dfsg-3
ii  zlib1g   1:1.2.11.dfsg-2

cpp-10 recommends no packages.

Versions of packages cpp-10 suggests:
pn  gcc-10-locales  

-- no debconf information

Upgrading off package cpp-10 from 10.1.0-6 to 10.2.0-3
requires the removal of packages:

clang  1:9.0-49.1
clang-91:9.0.1-13
clang-tidy 1:9.0-49.1
clang-tidy-9   1:9.0.1-13
clang-tools-9  1:9.0.1-13
libobjc-9-dev  9.3.0-16
libobjc4   10.1.0-6



Bug#965071: spamassassin 3.4.4-1 invalid home page link

2020-07-15 Thread Сергей Фёдоров
Package: spamassassin
Version: 3.4.4-1
Severity: normal
Tags: a11y

For the "spamassassin" package version 3.4.4-1

instead of " Home page: https://www.spamassassin.org/;

it should be " Home page: https://spamassassin.apache.org/;

otherwise, we see the content of the page "Apache OpenOffice - Official Site - 
The Free and Open Productivity Suite"



Bug#961745: [Pkg-pascal-devel] Bug#961745: [Pkg-utopia-maintainers] Bug#961745: udisks2 2.9.0-1 problems

2020-06-29 Thread Сергей Фёдоров
Based on your suggestion, I wrote to the doublecmd developer and they solved 
this problem. Thanks.



Bug#961745: [Pkg-utopia-maintainers] Bug#961745: udisks2 2.9.0-1 problems

2020-05-29 Thread Сергей Фёдоров
May be. I will write to him. Thanks.

29.05.2020, 02:57, "Michael Biebl" :
> Apparently doublecmd calls udisksctl mount -b
> I'm not really speaking Pascal: Maybe it is parsing the output of that
> command (which is brittle).
> I notice the difference between 2.8.x and 2.9.x
>
> 2.8.x:
> udisksctl mount -b /dev/sdb2
> Mounted /dev/sdb2 at /media/michael/Test.
>
> 2.9.x:
> udisksctl mount -b /dev/sdb2
> Mounted /dev/sdb2 at /media/michael/Test
>
> (note the missing '.')
>
> Maybe doublecmd get's confused by that.



Bug#961745: udisks2 2.9.0-1 problems

2020-05-28 Thread Сергей Фёдоров
Package: udisks2
Version: 2.9.0-1
Severity: normal



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.6.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages udisks2 depends on:
ii  dbus   1.12.16-2
ii  libacl12.2.53-8
ii  libatasmart4   0.19-5
ii  libblockdev-fs22.24-1
ii  libblockdev-loop2  2.24-1
ii  libblockdev-part2  2.24-1
ii  libblockdev-swap2  2.24-1
ii  libblockdev-utils2 2.24-1
ii  libblockdev2   2.24-1
ii  libc6  2.30-8
ii  libglib2.0-0   2.64.2-1
ii  libgudev-1.0-0 233-1
ii  libmount1  2.35.2-2
ii  libpam-systemd 245.5-3
ii  libpolkit-agent-1-00.105-26
ii  libpolkit-gobject-1-0  0.105-26
ii  libsystemd0245.5-3
ii  libudisks2-0   2.9.0-1
ii  libuuid1   2.35.2-2
ii  parted 3.3-4
ii  udev   245.5-3

Versions of packages udisks2 recommends:
ii  dosfstools   4.1-2
ii  e2fsprogs1.45.6-1
ii  eject2.35.2-2
ii  exfat-utils  1.3.0-1
ii  libblockdev-crypto2  2.24-1
ii  ntfs-3g  1:2017.3.23AR.3-3
ii  policykit-1  0.105-26

Versions of packages udisks2 suggests:
pn  btrfs-progs  
pn  f2fs-tools   
pn  libblockdev-mdraid2  
pn  mdadm
pn  nilfs-tools  
pn  reiserfsprogs
pn  udftools 
pn  udisks2-bcache   
pn  udisks2-btrfs
pn  udisks2-lvm2 
pn  udisks2-zram 
pn  xfsprogs 

-- no debconf information

The udisks2 package version 2.8.4-2 worked fine.
Updated to version 2.9.0-1 package
In addition to the boot disk, there are 4 disks labeled "D", "H", "E-D" and a 
disk with two partitions labeled "S1"and " S2".
The boot disk is mounted automatically and normally.
When attempting to mount disk "H", the message" Transition to /media/u1/H 
failed "is displayed and device" H " is being mounted "H1" in the 
"/media/u1/H1" directory. And so for all disks. Accordingly,
D1 with the message "Transition to the /media/u1/D directory failed".
E-D1 with the message "Transition to the /media/u1/E-D directory failed".
S11 with the message "Transition to the /media/u1/S1 directory failed".
And, for some reason, S2, not S21 with the message "Transition to the directory 
/media/u1/S failed".
Returned to udisks2 version 2.8.4-2.



Bug#956586: Problems upgrading LibreOffice from "1:6.1.5-3+deb10u5" to "1:6.4.2-3"

2020-04-13 Thread Сергей Фёдоров
I didn't want to keep anyone busy for nothing. But if when updating LibreOffice
it is suggested to delete "libreoffice-gtk2" and it is not suggested to install
"libreoffice-gtk3" of the new version, then this is not correct. LibreOffice 
Update
without installing "libreoffice-gtk3" of the new version, it leads to 
degradation
features of the document saving window (a completely different and inconvenient 
window).
I realized this after reinstalling Debian for parsing, what happens with the 
Libreoffice update.

13.04.2020, 14:06, "Rene Engelhard" :
> reassign 956586 src:libreoffice
> retitle 956586 buster -> bullseye upgrade deinstalls -gtk2 without installing 
> -gtk3
> severity 956586 minor
> tag 956586 + wonftix
> found 956586 1:6.4.0~alpha1-0reprotest1
> thanks
>
> [ If you send a bug, please use a non-generic subject ]
>
> Hi,
>
> On Mon, Apr 13, 2020 at 01:34:58PM +0300, Сергей Фёдоров wrote:
>>  Package: libreoffice
>>  Version: 1:6.1.5-3+deb10u5
>
> If at all, this would be a bug in the newer version, not the old one :)
>
>>  Tags: a11y
>
> Erm? No. Why?
>
>>  When upgrading LibreOffice from "1:6.1.5-3+deb10u5" (Debian 10.3 64) to
>>  "1:6.4.2-3", you are asked to delete libreoffice-gtk2" 1:6.1.5-3+deb10u5",
>>  but for some reason you do not need to install libreoffice-gtk3.
>
> And?
>
>>  This makes it
>>  very inconvenient to save a file in LibreOffice, even though "1:6.4.2-3"
>>  only works with Gtk3.
>
> No, you just install libreoffice-gtk3.
>
> And I believe it's the admins' job to look what a upgrade will do, see
> that gtk2 will be gone and maybe install -gtk3. I.e. yours..
>
> Even if one wanted to "fix" this - how would you do this?
>
> Gtk2 support is gone. Even upstream.
>
> Add a transitional package -gtk2 with a hard depend on -gtk3? Don't
> think we should do that? It's not as if it was renamed or moved betwen
> packages, it's simply gone.
>
> Hard depends on gtk3? Don't think KDE people or people not using a
> Gtk-using Desktop will like this.
>
> If you installed via a task you'll get the task recommending -gtk3 now
> anyway and get the new dependency - the tasks already got updated ttbomk.
>
> Regards,
>
> Rene



Bug#956586: Problems upgrading LibreOffice from "1:6.1.5-3+deb10u5" to "1:6.4.2-3"

2020-04-13 Thread Сергей Фёдоров
Package: libreoffice
Version: 1:6.1.5-3+deb10u5
Severity: normal
Tags: a11y

Debian 10.3-64
When upgrading LibreOffice from "1:6.1.5-3+deb10u5" (Debian 10.3 64) to
"1:6.4.2-3", you are asked to delete libreoffice-gtk2" 1:6.1.5-3+deb10u5",
but for some reason you do not need to install libreoffice-gtk3. This makes it
very inconvenient to save a file in LibreOffice, even though "1:6.4.2-3"
only works with Gtk3.



Bug#953809: tasksel 3.59: it needs to delete task-print-server and task-print-service

2020-03-13 Thread Сергей Фёдоров
Package: tasksel
Version: 3.59
Severity: normal

When upgrading any of the packages from version 3.58 to 3.59:
   task-cyrillic
   task-desktop
   task-russian
   task-xfce-desktop
   tasksel
   tasksel-data
it needs to delete packages version 3.58
   task-print-server
   task-print-service
but their version 3.59 is not available.



Bug#953039: upgrading packet python3 up to 3.8.2-1 asks packets deletion

2020-03-03 Thread Сергей Фёдоров


Package: python3
Version: 3.7.5-3
Severity: critical
Tags: a11y
Justification: breaks unrelated software



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-8-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages python3 depends on:
ii  libpython3-stdlib  3.7.5-3
ii  python3-minimal3.7.5-3
ii  python3.7  3.7.6-1+b1

python3 recommends no packages.

Versions of packages python3 suggests:
pn  python3-doc   
pn  python3-tk
pn  python3-venv  

-- no debconf information

Upgrading off package python3 from 3.7.5-3 to 3.8.2-1
asks packets deletion:

hplip  3.20.2+dfsg0-1
libreoffice  1:6.4.1-1
libreoffice-librelogo  1:6.4.1-1
libreoffice-script-provider-python  1:6.4.1-1
libsmbclient  2:4.11.5+dfsg-1
python3-smbc  1.0.15.6-2+b1
python3-talloc  2.3.0-3
python3-uno  1:6.4.1-1
samba-libs  2:4.11.5+dfsg-1
vlc-plugin-samba  3.0.8-4

but these are the latest versions of packages.



Bug#949785: Unable extract with --files-from archieve members with space symbols in their names

2020-01-24 Thread Сергей Фёдоров
If the names of archive members contain spaces, then when you try to extract 
them using

  --files-from=file-name
  -T file-name

an error message is displayed and the operation is canceled.

I am sorry, slip-up.

True Example: 

$ mkdir "test 1"
$ echo "asdfghh" > "test 1/test 1.txt"

$ tar -czv  -f "test 1.tar.xz" "test 1"

$ echo "test 1/" > "list.txt"
$ echo "test 1/test 1.txt" >> "list.txt"

$ tar -xv  -f "test 1.tar.xz" -T list.txt"
test 1/
test 1/test 1.txt
tar: test 1/list.txt: Not found in archive
tar: Exiting with failure status due to previous errors

But it's OK running:
$ tar -xv -f "test 1.tar.xz" "test 1/test 1.txt"
test 1/test 1.txt  



Bug#949785: Tar - Unable extract with --files-from archieve members with space symbols in their names

2020-01-24 Thread Сергей Фёдоров
Package: tar
Version: 1.30+dfsg-6+b1
Severity: normal



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-6-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages tar depends on:
ii  libacl1  2.2.53-5
ii  libc62.29-9
ii  libselinux1  3.0-1

tar recommends no packages.

Versions of packages tar suggests:
ii  bzip21.0.8-2
pn  ncompress
pn  tar-doc  
pn  tar-scripts  
ii  xz-utils 5.2.4-1+b1

-- no debconf information

If the names of archive members contain spaces, then when you try to extract 
them using

  --files-from=file-name
  -T file-name

an error message is displayed and the operation is canceled.

Example:

$ mkdir "test 1"
$ echo "asdfghh" > "test 1/test 1.txt"

$ tar -czv  -f "test 1.tar.xz" "test 1"

$ echo "test 1/" > "list.txt"
$ echo "test 1/test 1.txt" >> "list.txt"

$ tar -xv  -f "test 1.tar.xz" "test 1/list.txt"
test 1/
test 1/test 1.txt
tar: test 1/list.txt: Not found in archive
tar: Exiting with failure status due to previous errors

But it's OK running:
$ tar -xv -f "test 1.tar.xz" "test 1/test 1.txt"
test 1/test 1.txt



Bug#949745: firefox-esr 68.4 don't start if installed gcc 9.2.1-24

2020-01-24 Thread Сергей Фёдоров
Package: gcc-9-base
Version: 9.2.1-24  

With GCC version 9.2.1-25

  firefox-esr 68.4.1 esr-1
  firefox-esr 68.4.2 esr-1

normally start and work.  

Thanks.



Bug#949745: firefox-esr 68.4 don't start if installed gcc 9.2.1-24

2020-01-24 Thread Сергей Фёдоров
Package: gcc-9-base
Version: 9.2.1-24
Severity: important
Tags: a11y

Updating packages:

  cp-9 (9.2.1-22) to 9.2.1-24
  gcc-9-base (9.2.1-22) to 9.2.1-24
  libatomic1 (9.2.1-22) to 9.2.1-24
  libgcc1 (1:9.2.1-22) to 1:9.2.1-24
  libgfortran5 (9.2.1-22) to 9.2.1-24
  libgomp1 (9.2.1-22) to 9.2.1-24
  libquadmath0 (9.2.1-22) to 9.2.1-24
  libstdc++6 (9.2.1-22) to 9.2.1-24

After updating packages:

  firefox-esr 68.4.1 esr-1
  firefox-esr 68.4.2 esr-1

does not start, only starts
  firefox-esr 68.2.0 esr-1~deb10u1_all

Rollback to version 9.2.1-22 using:

apt-get --allow-downgrade \
install cpp-9=9.2.1-22 \
gcc-9-base=9.2.1-22   \
libatomic1=9.2.1-22   \
libgcc1=1:9.2.1-22\
libgfortran5=9.2.1-22 \
libgomp1=9.2.1-22 \
libquadmath0=9.2.1-22 \
libstdc++6=9.2.1-22

doesn't solve the problem.

It has reinstall Debian 10.2 and then Sid.



Bug#949212: Apt-mirror. My proposal to maintaining

2020-01-18 Thread Сергей Фёдоров
Package: apt-mirror
Version: 0.5.4-1

The E-Mail:

Good day!

I have a few fixes to the program. You can see:

931729: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931729
932379: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=932379
Debian Bug Tracking System

I have been working on apt-mirror with these fixes for several months and so far
didn't see any problems.

Can help you in maintaining this package.

with best wishes...

I sent this email to m...@brandonholtsclaw.com Sat, 09 Nov 2019 17:47:27 +0300,
but I got a message from my provider::

: host brandonholtsclaw.com[198.7.57.210] said: 550
5.1.1 Bad destination mailbox address (in reply to RCPT TO command)

Reporting-MTA: dns; forward101p.mail.yandex.net
X-Yandex-Queue-ID: EAF7A3280EB6
X-Yandex-Sender: rfc822; serfyod...@yandex.ru
Arrival-Date: Sat,  9 Nov 2019 17:47:27 +0300 (MSK)

Final-Recipient: rfc822; m...@brandonholtsclaw.com
Original-Recipient: rfc822;m...@brandonholtsclaw.com
Action: failed
Status: 5.1.1
Remote-MTA: dns; brandonholtsclaw.com
Diagnostic-Code: smtp; 550 5.1.1 Bad destination mailbox address  



Bug#946305: linux-image-5.3.0-2-amd64, linux-image-5.3.0-3-amd64 problems copying a large group of files

2019-12-24 Thread Сергей Фёдоров
Under linux kernel-image-4.19.0-6-amd64 Linux 4.19 for 64-bit PCs (signed)
(4.19.67-2 + deb10u1) no problems occur when copying folders with files
total volume > 100 Gb.

Problems were found when working under the linux-image kernel-5.3.0-3-amd64
Linux 5.3 for 64-bit PCs (signed) (5.3.15-1)

After copying an array of files in 1.4 Tb from one disk to another, by testing
copied "*.rar-files" some files are found  with partially distorted content.
How this is possible is not yet clear. "rar t" on such files gives messages
"checksum error". There may not be any such bad files or be from 1 to 6-7
on the entire array of files. And from copy to copy such failures occur
in arbitrary files.

A total of 4511 rar files of 1.4 Tb were copied.

This happens when you copy through:

- copy with " Double Commander"
- "cp-Rp"../Download" " / media/u1/u-z/U-Z/"
- time ionice -c Best-effort-n 7 cp-Rp "../Download" "/media/user/disk2/"

In all 3 cases, copying is about 3 or more hours.

After that testing the copied files using

   time ionice -c Best-effort-n 7 rar t-r "*.rar" &> "log.txt"

allows you to detect failures that occur when copying rar archives, the message
"checksum error" on such files. I. when you test such copied archives, then
you find the replacement of entire blocks on the unknown where the dirt has 
taken,
but the size of the files does not change. So at least you can find it. What's
going on with files not protected by CRC codes, one can only guess.
This shouldn't be happening!

I re-copy the failed files manually through "Double Commander" and then test 
them
this archive. And it passes without mistakes.

Testing a copied 1.4 Tb archive array takes between 2.5 hours and 3 hours.

Then defragment copied through "e4defrag -v 'path to files massive'".

Again I check rar-files through

   time ionice -c Best-effort-n 7 rar t-r "*.rar" &> "log.txt"

And then it turns out that again arbitrarily appear archives, which are reported
"checksum error". But at the subsequent individual testing of such archives
no "checksum error" messages appear. It turned out that after
defragment the copied files, you just need to reset the cache:

  sync; echo 3 > /proc/sys/vm/drop_caches (with administrator rights)

And after resetting the cache, start testing the copied archives. Then
"checksum error" messages do not appear.

When copying individual folders from this array with "*.rar files"
there are no such problems.

The problem is related to caching information in Debian. The method
of "scientific poke" picked up parameters for Seagate ST2000 disks
(disks with" Hot-Plug " Barracuda ST2000DMD001, Constellation ES.3 ST2000NM0033
and CS ST2000NC001, not " Hot-Plug» Barracuda ST2000DM008).

About the "vm.dirty_background_ratio " look at the installed package
"linux-source" in the folder " /usr/src/linux-source-5.3.tar.xz". Open the 
archive

   tar-x-f "/usr/src / linux-source-5.3.tar.xz"

And look in the folder " 
linux-source-5.3/Documentation/admin-guide/sysctl/vm.rst".
In General, in the folder "linux-source-5.3/Documentation" a lot of very 
important
documentation on configuring Debian.

It is necessary to install for Linux kernel-image-5.3.0-3-amd64 Linux 5.3
for 64-bit PCs (signed) (5.3.15-1):

In " /etc/sysctl.d/local.conf"

   vm.dirty_background_ratio = 5

vm.dirty_background_ratio = 10 (default), =9, = 8, =7, and even at =6
when copying through all three copy methods (see above), there are
distortion of information when copying from disk to disk.
In "Double Commander" are visible temporary slowdown copying and even
temporarily repeatedly pausing copying. Using "Double Commander" you can clearly
see the change in the speed of copying and the process itself. Interesting,
that in the process copying repeatedly were attempts the most
Debian to increase the speed of copying, but with the simultaneous further
speed drop to 120 Mb/s, although copying started at 170 Mb/s.

When "vm.dirty_background_ratio = 5" stopped occurring after copying
1.4 Tb of rar files of the message "checksum error" at "rar t".

That is, we can assume that the information is now copied without distortion.

On other computers, the acceptable value is " vm.dirty_background_ratio " can
be another.

When set to " vm.dirty_background_ratio=5 " copying an array of 1.4 Gb files
in "Double Commander" takes the same time as in

   time ionice -c Best-effort-n 7 cp-Rp "../Download" " /media/u1/disk2/"

, i.e. about 3 hours and, in the future, when testing the copied information
no errors occur.   



Bug#946311: libpcre2-dev 10.34-5 dependency errors

2019-12-06 Thread Сергей Фёдоров


Package: libpcre2-dev
Version: 10.34-5
Severity: grave
Tags: a11y
Justification: renders package unusable



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-6-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages libpcre2-dev depends on:
ii  libc6-dev2.29-3
ii  libpcre2-16-010.34-5
ii  libpcre2-32-010.34-5
ii  libpcre2-8-0 10.34-5
pn  libpcre2-posix2  

libpcre2-dev recommends no packages.

libpcre2-dev suggests no packages.

-- no debconf information

After I installed libpcre2-dev 10.34-5 i get dependency errors for 
libpcre2-posix2.

I get a message: attempt to overwrite 
"/usr/lib/x86_64-linux-gnu/libpcre2-posix.so. 2. 0. 3"
 which is already available in package libpcre2-posix 0: amd64 10.34-3+b1

And I have to go back to the previous version 10.34-3+b1.



Bug#946305: linux-image-5.3.0-2-amd64: checksum errors occur when testing rar archives

2019-12-06 Thread Сергей Фёдоров
Package: src:linux
Version: 5.3.9-3
Severity: normal



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 4701
board_vendor: ASUSTeK COMPUTER INC.
board_name: P9X79 PRO
board_version: Rev 1.xx

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E5/Core i7 DMI2 [8086:3c00] 
(rev 07)
Subsystem: ASUSTeK Computer Inc. Xeon E5/Core i7 DMI2 [1043:84ef]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express 
Root Port 1a [8086:3c02] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:02.0 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express 
Root Port 2a [8086:3c04] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express 
Root Port 3a in PCI Express Mode [8086:3c08] (rev 07) (prog-if 00 [Normal 
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:03.2 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express 
Root Port 3c [8086:3c0a] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:05.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Address 
Map, VTd_Misc, System Management [8086:3c28] (rev 07)
Subsystem: ASUSTeK Computer Inc. Xeon E5/Core i7 Address Map, VTd_Misc, 
System Management [1043:84ef]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:05.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Control 
Status and Global Errors [8086:3c2a] (rev 07)
Subsystem: ASUSTeK Computer Inc. Xeon E5/Core i7 Control Status and 
Global Errors [1043:84ef]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:05.4 PIC [0800]: Intel Corporation Xeon E5/Core i7 I/O APIC [8086:3c2c] (rev 
07) (prog-if 20 [IO(X)-APIC])
Subsystem: ASUSTeK Computer Inc. Xeon E5/Core i7 I/O APIC [1043:84ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 

00:11.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI 
Express Virtual Root Port [8086:1d3e] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:16.0 Communication controller [0780]: Intel Corporation C600/X79 series 
chipset MEI Controller #1 [8086:1d3a] (rev 05)
Subsystem: ASUSTeK Computer Inc. C600/X79 series chipset MEI Controller 
[1043:84ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: mei_me
Kernel modules: mei_me

00:19.0 Ethernet 

Bug#943358: Synaptic 0.84.8 installs packets with "depends on" absent packages

2019-10-24 Thread Сергей Фёдоров
PS.
That's interesting,

  apt-cache.sh \
depends calibre \
depends calibre-bin \
depends qtcreator

outputs:

calibre
  Depends: python2.7
  Depends: python-bs4
  Depends: python-css-parser
  Depends: python-dbus
  Depends: python-pil
  Depends: python-lxml
  Depends: python-mechanize
  Depends: python-pkg-resources
  Depends: python-cssutils
  Depends: python-cssselect
  Depends: python-cherrypy3
  Depends: python-dateutil
  Depends: python-feedparser
  Depends: python-html2text
  Depends: python-html5-parser
  Depends: python-html5lib
  Depends: python-markdown
  Depends: python-msgpack
  Depends: python-pyqt5
  Depends: python-pyqt5.qtwebkit
  Depends: python-pyqt5.qtsvg
  Depends: python-pyparsing
  Depends: python-regex
  Depends: python-routes
  Depends: python-chardet
  Depends: python-netifaces
  Depends: python-apsw
  Depends: xdg-utils
  Depends: imagemagick
graphicsmagick-imagemagick-compat
imagemagick-6.q16
  Depends: libjpeg-turbo-progs
  Depends: optipng
  Depends: poppler-utils
  Depends: fonts-liberation
  Depends: libjs-mathjax
  Depends: libjs-coffeescript
  Depends: calibre-bin
  Recommends: python-dnspython
  Offers: python-unrardll

calibre-bin
  Depends: libc6
  Depends: libchm1
  Depends: libfontconfig1
  Depends: libfreetype6
  Depends: libgcc1
  Depends: libglib2.0-0
  Depends: libicu63
  Depends: libmtp9
  Depends: libpodofo0.9.6
  Depends: libpython2.7
  Depends: libqt5core5a
  Depends: libqt5dbus5
 |Depends: libqt5gui5
  Depends: libqt5gui5-gles
  Depends: libqt5widgets5
  Depends: libssl1.1
  Depends: libstdc++6
  Depends: libusb-1.0-0
  Depends: 
libqt5core5a
  Depends: zlib1g
  Depends: 
python-sip
  Depends: python2.7
  Recommends: calibre

qtcreator
  Depends: libqt5sql5-sqlite
  Depends: qml-module-qtqml-models2
  Depends: qml-module-qtquick-controls
  Depends: qml-module-qtquick2
  Depends: qtchooser
  Depends: qtcreator-data
  Depends: libc6
  Depends: libclang1-8
  Depends: libgcc1
  Depends: libllvm8
  Depends: libqbscore1.13
  Depends: libqt5concurrent5
  Depends: libqt5core5a
  Depends: libqt5designer5
  Depends: libqt5designercomponents5
 |Depends: libqt5gui5
  Depends: libqt5gui5-gles
  Depends: libqt5help5
  Depends: libqt5network5
  Depends: libqt5printsupport5
  Depends: libqt5qml5
  Depends: libqt5quick5
  Depends: libqt5quickwidgets5
  Depends: libqt5script5
  Depends: libqt5serialport5
  Depends: libqt5sql5
  Depends: libqt5widgets5
  Depends: libqt5xml5
  Depends: libstdc++6
  Depends: 
libqt5core5a
  Depends: 
libqt5qml5
  Breaks: qtcreator-data
  Recommends: clang
  Recommends: gdb
gdb-minimal
  Recommends: make
make-guile
  Recommends: qmlscene
  Recommends: qt5-doc
  Recommends: qt5-qmltooling-plugins
  Recommends: qtbase5-dev-tools
  Recommends: qtcreator-doc
  Recommends: qtdeclarative5-dev-tools
  Recommends: qttools5-dev-tools
  Recommends: qttranslations5-l10n
  Recommends: qtxmlpatterns5-dev-tools
 |Recommends: xterm
  Recommends: 
deepin-terminal
eterm
gnome-terminal
kitty
konsole
lilyterm
lxterminal
mate-terminal
mlterm
mlterm-tiny
pterm
qterminal
rxvt-unicode
sakura
stterm
terminator
terminology
termit
tilix
xfce4-terminal
xiterm+thai
xterm
  Offers: clazy
  Offers: cmake
  Offers: g++
  Offers: git
  Offers: 
  Offers: subversion
  Offers: valgrind
  Replaces: qtcreator-data

where missing packets are taken in "< ... > ", and below, apparently, replacing 
it
package.



Bug#943358: synaptic: Synaptic 0.84.8 installs packets with "depends on" absent packages

2019-10-23 Thread Сергей Фёдоров
Package: synaptic
Version: 0.84.8
Severity: normal
Tags: security



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages synaptic depends on:
ii  hicolor-icon-theme  0.17-2
ii  libapt-inst2.0  1.8.4
ii  libapt-pkg5.0   1.8.4
ii  libc6   2.29-2
ii  libept1.5.0 1.1+nmu3+b1
ii  libgcc1 1:9.2.1-12
ii  libgdk-pixbuf2.0-0  2.40.0+dfsg-1
ii  libglib2.0-02.62.1-1
ii  libgtk-3-0  3.24.12-1
ii  libpango-1.0-0  1.42.4-7
ii  libstdc++6  9.2.1-12
ii  libvte-2.91-0   0.58.2-1
ii  libxapian30 1.4.12-1
ii  policykit-1 0.105-26

Versions of packages synaptic recommends:
ii  libgtk3-perl  0.036-1
ii  xdg-utils 1.1.3-1

Versions of packages synaptic suggests:
pn  apt-xapian-index 
pn  deborphan
pn  dwww 
pn  menu 
pn  software-properties-gtk  
ii  tasksel  3.55

-- no debconf information

Package: qtcreator
Version: 4.10.1-1
Severity: important

"Qtcreator 4.10.1-1" installation requires packages:

  qtbase-abi-5-11-3
  qtdeclarative-abi-5-11-2

but they are not.

Package: calibre
Version: 4.0.0+really3.48.dfsg-1
Severity: important

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

"calibre 4.0.0+really3.48.dfsg-1" installation requires package:

  calibre-bin (>= 4.0.0+really3.48.dfsg-1) (it is)

  and packages are required to install it:

  qtbase-abi-5-11-3
  sip-api-12.6

but the last two packages are not.

I have a Synaptic version of "0.84.8".
Synaptic refused to install the "qtcreator" and "calibre" packages due to lack 
of
packages':

  qtbase-abi-5-11-3
  qtdeclarative-abi-5-11-2

  qtbase-abi-5-11-3
  qtdeclarative-abi-5-11-2

2019-10-22 I sent messages to support packages "calibre" and "qtcreator" about
this.

2019-10-23 I found that the "calibre" and "qtcreator" packages are now installed
in the same version of Synaptic without any messages though missing packages
still missing.

How could that be?

The same problem occur with kernel:

linux-image-4.19.0-5-amd64
Linux 4.19 for 64-bit PCs (signed)
ver. 4.19.37-5

linux-image-5.2.0-3-amd64
Linux 5.2 for 64-bit PCs (signed)
ver. 5.2.17-1+b1

linux-image-5.3.0-1-amd64
Linux 5.3 for 64-bit PCs (signed)
ver. 5.3.7-1  



Bug#942824: calibre 4.0.0+really3.48.dfsg-1 requires packages that do not exist

2019-10-21 Thread Сергей Фёдоров
Package: calibre
Version: 4.0.0+really3.48.dfsg-1
Severity: important

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

"calibre 4.0.0+really3.48.dfsg-1" installation requires package:

  calibre-bin (>= 4.0.0+really3.48.dfsg-1) (it is)

  and packages are required to install it:

  qtbase-abi-5-11-3
  sip-api-12.6

but the last two packages are not. 



Bug#942820: Qtcreator 4.10.1-1 requires packages that do not exist

2019-10-21 Thread Сергей Фёдоров
Package: qtcreator
Version: 4.10.1-1
Severity: important

"Qtcreator 4.10.1-1" installation requires packages:

  qtbase-abi-5-11-3
  qtdeclarative-abi-5-11-2

but they are not.   



Bug#942546: gnome-keyring write to "mailcap" and "gcr-viewer.desktop" "${exec_prefix}"

2019-10-17 Thread Сергей Фёдоров
Package: gnome-keyring
Version: 3.34.0-1
Severity: normal



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages gnome-keyring depends on:
ii  dbus-user-session [default-dbus-session-bus]  1.12.16-2
ii  dbus-x11 [dbus-session-bus]   1.12.16-2
ii  dconf-gsettings-backend [gsettings-backend]   0.34.0-1
ii  gcr   3.33.4-3
ii  libc6 2.29-2
ii  libcap-ng00.7.9-2+b1
ii  libcap2-bin   1:2.25-2
ii  libgck-1-03.33.4-3
ii  libgcr-base-3-1   3.33.4-3
ii  libgcrypt20   1.8.5-3
ii  libglib2.0-0  2.62.1-1
ii  p11-kit   0.23.18.1-2
ii  pinentry-gnome3   1.1.0-3

Versions of packages gnome-keyring recommends:
ii  gnome-keyring-pkcs11  3.34.0-1
ii  libpam-gnome-keyring  3.34.0-1

gnome-keyring suggests no packages.

-- no debconf information

When installing gnome-keyring writes into "/etc/mailcap"lines where paths start
with " ${exec_prefix}", but this variable is not defined anywhere.

/etc/mailcap :

application/pkcs12; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/pkcs12+pem; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/pkcs7-mime; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/pkcs7-mime+pem; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/pkcs8; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/pkcs8+pem; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/pkix-cert; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/pkix-cert+pem; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/pkix-crl; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/pkix-crl+pem; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/x-pem-file; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/x-pem-key; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/x-pkcs12; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/x-pkcs7-certificates; ${exec_prefix}/bin/gcr-viewer %s; test=test 
-n "$DISPLAY"
application/x-x509-ca-cert; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/x-x509-user-cert; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/pkcs10; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/pkcs10+pem; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"
application/x-spkac; ${exec_prefix}/bin/gcr-viewer %s; test=test -n "$DISPLAY"
application/x-spkac+base64; ${exec_prefix}/bin/gcr-viewer %s; test=test -n 
"$DISPLAY"

And in "/usr/share/application/gcr-viewer.desktop" is written string
"Exec=${exec_prefix}/bin/gcr-viewer", what do not like, for example, menulibre.



Bug#942223: SATA Hot Plug Seagate disks problem

2019-10-12 Thread Сергей Фёдоров

Package: base
Severity: normal



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

I use Seagate hard drives.
Barracuda st2000dm008 drives do not support Hotplug, so they work fine.
Other Seagate drives that don't support Hot Plug work fine, too.
Discs Barracuda st2000dm001, Constellation ES3 st2000nm0033, st2000nc001
support Hotplug, so there are problems with Them.

Initially in BIOS Hot Plug support was turned off for Intel X79 Express Chipset,
but for Marvell 9128 SATA Controller there is no such option. Disks that support
Hotplug, were recognized at Linux loading and further worked. But, within a 
week,
if their not to switch every 2-2 days to other SATA ports, they started clicking
loudly excitedly, spoiling the information on the write, creating a failure when
reading files. And after a while the disks stopped working. So died 3 disks
for several years. When turned off in BIOS "Hot Plug" drives
Barracuda ST2000DM001, Constellation ES3 ST2000NM0033, ST2000NC001 are 
identified
only when booting Linux. If you connect them on the power line after booting
Linux, they are not available.

After enabling the "Hot Plug Enabled" option in the BIOS, drives that support
Hot Plug, after booting Linux began to be automatically recognized and connected
when feeding on them power supply . Then, these disks work fine until shutdown
computer's. But, if before booting Linux, such disks do not disconnect
from the power supply, then after a while they begin to click, which serves
the first sign of their imminent death, as already described above.

I attach a log file.  

messages_disk_error_my
Description: Binary data


Bug#931729: apt-mirror: SSUse of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror line 829)

2019-10-11 Thread Сергей Фёдоров
I offer version 2 of the correction:

To solve a problem I wrote about earlier,
in the text of the program "apt-mirror 0.5.4-1" commented or added new lines.

I marked my changes with comments:
# *** my comment
# *** my insert

#---
# I agree with Justin Pasher (932...@bugs.debian.org) and with Stephan Seitz 
(932...@bugs.debian.org),
# if you look a little lower in the text of the program "apt-mirror",
# you can see a similar code, but for all 3 archive formats:
#
# sub find_dep11_files_in_release
#...
#   if ( $filename =~ 
m{^$component/dep11/(Components-${arch}\.ml|icons-[^./]+\.tar)\.(gz|bz2|xz)$} )
#
#So maybe better:

sub find_translation_files_in_release
{
...
  # if ( $filename =~ m{^$component/i18n/Translation-[^./]*\.bz2$} ) # my 
comment
  if ( $filename =~ m{^$component/i18n/Translation-[^./]*\.(gz|bz2|xz)$} )  
# my insert

# In order not to think about it anymore, especially since all the rest of the 
text supports all 3 formats.
#---
sub need_update
{
my $filename   = shift;
my $size_on_server = shift;

my ( undef, undef, undef, undef, undef, undef, undef, $size ) = 
_stat($filename);

// $size may have a value "undef", if the file on client side is apsent.
# return 1  unless ($size);# *** my comment 2
return 1  unless (defined $size);  # *** my insert  2
return 1  if ($size <= 0); # *** my insert  2

return 0 if $size_on_server == $size;

unlink( $filename ) || die("apt-mirror: unlink error:  $! for file: 
$filename"); # *** my insert
return 1;
}

#---
sub process_index
{
 ...
 if ( exists $lines{"Filename:"} )
 {   # Packages index
 $skipclean{ remove_double_slashes( $path . "/" . $lines{"Filename:"} ) 
} = 1;
 print FILES_ALL remove_double_slashes( $path . "/" . 
$lines{"Filename:"} ) . "\n";
 print FILES_MD5 $lines{"MD5sum:"} . "  " . remove_double_slashes( 
$path . "/" . $lines{"Filename:"} ) . "\n" if defined lines{"MD5sum:"};
 print FILES_SHA1 $lines{"SHA1:"} . "  " . remove_double_slashes( $path 
. "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"SHA1:"};
 print FILES_SHA256 $lines{"SHA256:"} . "  " . remove_double_slashes( 
$path . "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"SHA256:"};
 if ( need_update( $mirror . "/" . $lines{"Filename:"}, $lines{"Size:"} 
) )
 {
 print FILES_NEW remove_double_slashes( $uri . "/" . 
$lines{"Filename:"} ) . "\n";
 add_url_to_download( $uri . "/" . $lines{"Filename:"}, 
$lines{"Size:"} );
 }
 }
 #else # *** my comment
 elsif ( exists $lines{"Files:"} )  # *** my insert
 {# Sources index
  foreach ( split( /\n/, $lines{"Files:"} ) )
  {
 ...
}
##
## Main download

chdir get_variable("mirror_path") or die("apt-mirror: can't chdir to mirror");

my $need_bytes = 0;
foreach ( values %urls_to_download )
{
$need_bytes += $_;
}
if ($need_bytes > 0) {  # *** my insert

  my $size_output = format_bytes($need_bytes);

  print "$size_output will be downloaded into archive.\n";

  download_urls( "archive", sort keys %urls_to_download );
}  # *** my insert
##

String with "unlink" in "sub need_update" is very important, since "wget" does
not a re-change a package if it is not fully downloaded on previous runs
of "apt-mirror". For example, if in the previous run "apt-mirror" pressed 
"Ctrl+C".

After this change everything works fine and the message:

Processing indexes: [SUse of uninitialized value $lines{"Files:"} in split 
at /usr/bin/apt-mirror line 829,  line 1.
Use of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror 
line 829,  line 2.
P]

больше не возникает. Да и сообщения из-за повторного скачивания неполностью
скаченных пакетов тоже не возникают.

no longer appears. And messages for re-download the not completely
downloaded packages also do not occur.



Bug#942141: xfce4: Xfce 4.14 XDG_DATA_DIRS="/usr/share:/usr/local/share:/usr/share"

2019-10-10 Thread Сергей Фёдоров


Package: xfce4
Version: 4.14
Severity: normal
Tags: patch



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages xfce4 depends on:
ii  libxfce4ui-utils 4.14.1-1+b1
ii  thunar   1.8.9-1+b1
ii  xfce4-appfinder  4.14.0-1+b1
ii  xfce4-panel  4.14.1-1
ii  xfce4-pulseaudio-plugin  0.4.2-1
ii  xfce4-session4.14.0-1+b1
ii  xfce4-settings   4.14.1-1
ii  xfconf   4.14.1-1
ii  xfdesktop4   4.14.1-1
ii  xfwm44.14.0-2

Versions of packages xfce4 recommends:
ii  desktop-base  10.0.3
ii  tango-icon-theme  0.8.90-7
ii  thunar-volman 0.9.5-1+b1
ii  xfce4-notifyd 0.4.4-1+b1
ii  xorg  1:7.7+19

Versions of packages xfce4 suggests:
pn  xfce4-goodies
ii  xfce4-power-manager  1.6.5-2

-- no debconf information

In the terminal window, in the output of the "env" command, I found the line:
   XDG_DATA_DIRS=/usr/share/xfce4:/usr/local/share/:/usr/share/:/usr/share/

It made me think.
In "/usr/bin/startxfce4" in the block

   if test "x$XDG_DATA_DIRS" = "x"
   then
 if test "x/usr/share" = "x/usr/local/share" -o "x/usr/share" = 
"x/usr/share"; then
   XDG_DATA_DIRS="/usr/local/share:/usr/share"
 else
   XDG_DATA_DIRS="/usr/share:/usr/local/share:/usr/share"
 fi
   else
 XDG_DATA_DIRS="$XDG_DATA_DIRS:/usr/share"
   fi

excluded duplication for XDG_DATA_DIRS - line
   XDG_DATA_DIRS="/usr/share:/usr/local/share:/usr/share"
replaced by
   XDG_DATA_DIRS="/usr/share:/usr/local/share"

This did not solve the problem.
Commenting a line:
   XDG_DATA_DIRS="$XDG_DATA_DIRS:/usr/share"
after “else”, the “Login” window reappears to enter Debian and there is no way 
out of this cycle.

Installing Debian 10.1 on another blank disk from scratch will repeat the 
situation:
   Duplicate rows in the Select Application window

Transferring “*.desktop” files from “/usr/share/applications/” to 
“/usr/local/share/applications/”
solves the situation, but the question remains why, if there are “* .desktop” 
files in
“/usr/share/applications/" duplication of lines occurs only for these files.
But in the “Thunar 1.8.9” file manager, line duplication does not occur with 
“Open with”.

Replacing the line finally solved the problem:
   else
  XDG_DATA_DIRS="$XDG_DATA_DIRS:/usr/share"
on
   else
  XDG_DATA_DIRS="$ XDG_DATA_DIRS"

Now when executing the “env” command, I find the line:
   XDG_DATA_DIRS=/usr/share/xfce4:/usr/local/share/:/usr/share/

Problem Duplication of lines in the "Application Selection" window was resolved,
lines no longer duplicated under Doublecmd.

Changed normal code block in "/usr/bin/startxfce4" is:

   if test "x$XDG_DATA_DIRS" = "x"
   then
 if test "x/usr/share" = "x/usr/local/share" -o "x/usr/share" = 
"x/usr/share"; then
   XDG_DATA_DIRS="/usr/local/share:/usr/share"
 else
   XDG_DATA_DIRS="/usr/share:/usr/local/share"
 fi
   else
 XDG_DATA_DIRS="$XDG_DATA_DIRS"
   fi



Bug#942135: Сannot install Perl 5.30.0-6 without deleting the libgtk2-perl package

2019-10-10 Thread Сергей Фёдоров


Package: perl
Version: 5.28.1-6
Severity: important
Tags: a11y



-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.2.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages perl depends on:
ii  dpkg   1.19.7
ii  libperl5.285.28.1-6
ii  perl-base  5.28.1-6
ii  perl-modules-5.28  5.28.1-6

Versions of packages perl recommends:
ii  netbase  5.6

Versions of packages perl suggests:
pn  libb-debug-perl 
pn  liblocale-codes-perl
pn  libterm-readline-gnu-perl | libterm-readline-perl-perl  
ii  make4.2.1-1.2
ii  perl-doc5.28.1-6

-- no debconf information

Cannot update 67 Perl update dependent software packages. And Perl, I can’t 
upgrade from 5.28.1-6 to 5.30.0-6 due to the lack of the “libgtk2-perl” package 
that is compatible with the new version of Perl. Will this problem be solved?



Bug#932379: apt-mirror doesn't grab *.xz i18n Translation files

2019-09-08 Thread Сергей Фёдоров
I agree with Justin Pasher, but if you look a little lower in the text of the 
program "apt-mirror",
you can see a similar code, but for all 3 archive formats:

sub find_dep11_files_in_release
 ...
  if ( $filename =~ 
m{^$component/dep11/(Components-${arch}\.ml|icons-[^./]+\.tar)\.(gz|bz2|xz)$} )

So maybe better to add a line:

 if ( $filename =~ m{^$component/i18n/Translation-[^./]*\.(gz|bz2|xz)$} 
)

In order not to think about it anymore, especially since all the rest of the 
text supports all 3 formats.



Bug#931729: apt-mirror: SSUse of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror line 829

2019-09-04 Thread Сергей Фёдоров
To solve a problem I wrote about earlier,
in the text of the program "apt-mirror 0.5.4-1" commented or added new lines.

I marked my changes with comments:
# *** my comment
# *** my insert

#---
sub need_update
{
my $filename   = shift;
my $size_on_server = shift;

my ( undef, undef, undef, undef, undef, undef, undef, $size ) = 
_stat($filename);

return 1 unless ($size);
return 0 if $size_on_server == $size;

unlink( $filename ) || die("apt-mirror: unlink error:  $! for file: 
$filename");  # *** my insert
return 1;
}

#---
sub process_index
{
 ...
 if ( exists $lines{"Filename:"} )
 {   # Packages index
 $skipclean{ remove_double_slashes( $path . "/" . $lines{"Filename:"} ) 
} = 1;
 print FILES_ALL remove_double_slashes( $path . "/" . 
$lines{"Filename:"} ) . "\n";
 print FILES_MD5 $lines{"MD5sum:"} . "  " . remove_double_slashes( 
$path . "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"MD5sum:"};
 print FILES_SHA1 $lines{"SHA1:"} . "  " . remove_double_slashes( $path 
. "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"SHA1:"};
 print FILES_SHA256 $lines{"SHA256:"} . "  " . remove_double_slashes( 
$path . "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"SHA256:"};
 if ( need_update( $mirror . "/" . $lines{"Filename:"}, $lines{"Size:"} 
) )
 {
 print FILES_NEW remove_double_slashes( $uri . "/" . 
$lines{"Filename:"} ) . "\n";
 add_url_to_download( $uri . "/" . $lines{"Filename:"}, 
$lines{"Size:"} );
 }
 }
 #else  # *** my comment
 elsif ( exists $lines{"Files:"} )  # *** my insert
 {# Sources index
  foreach ( split( /\n/, $lines{"Files:"} ) )
  {
 ...
}
##
## Main download

chdir get_variable("mirror_path") or die("apt-mirror: can't chdir to mirror");

my $need_bytes = 0;
foreach ( values %urls_to_download )
{
$need_bytes += $_;
}
if ($need_bytes > 0) {   # *** my insert

  my $size_output = format_bytes($need_bytes);

  print "$size_output will be downloaded into archive.\n";

  download_urls( "archive", sort keys %urls_to_download );
}   # *** my insert
##

String with "unlink" in "sub need_update" is very important, since "wget" does
not a re-change a package if it is not fully downloaded on previous runs
of "apt-mirror". For example, if in the previous run "apt-mirror" pressed 
"Ctrl+C".

After this change everything works fine and the message:

Processing indexes: [SUse of uninitialized value $lines{"Files:"} in split 
at /usr/bin/apt-mirror line 829,  line 1.
Use of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror 
line 829,  line 2.
P]

no longer appears. And messages for re-download the not completely
downloaded packages also do not occur.



Bug#918276: closed by Sebastian Ramacher (Re: Bug#918276: (no subject))

2019-09-03 Thread Сергей Фёдоров
Probably You still did something, so VLC packages version 3.0.8-2
have established and work normally.

18.08.2019, 23:21, "Debian Bug Tracking System" :
> This is an automatic notification regarding your Bug report
> which was filed against the vlc package:
>
> #918276: vlc: When you open VLC 3.0.5-1 any .mp4 file a Debian 9.6 hangs
>
> It has been closed by Sebastian Ramacher .
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Sebastian Ramacher 
>  by
> replying to this email.
>
> --
> 918276: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=918276
> Debian Bug Tracking System
> Contact ow...@bugs.debian.org with problems



Bug#934755: closed by Sean Davis (Bug#934755: fixed in menulibre 2.2.1-1)

2019-09-03 Thread Сергей Фёдоров
You are right, version 2.2.1-1 has solved this problem. I downloaded it
from the website https://launchpad.net/menulibre and installed it instead
of version 2.2.0-2.
After the emergence of Your package version 2.2.1-1, moved on him and, too, all 
works.
Thanks!


01.09.2019, 03:09, "Debian Bug Tracking System" :
> This is an automatic notification regarding your Bug report
> which was filed against the menulibre package:
>
> #934755: menulibre 2.2.0-2 does not start on debian 10
>
> It has been closed by Sean Davis .
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Sean Davis 
>  by
> replying to this email.
>
> --
> 934755: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=934755
> Debian Bug Tracking System
> Contact ow...@bugs.debian.org with problems



Bug#931729: apt-mirror: SSUse of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror line 829

2019-09-03 Thread Сергей Фёдоров
To solve a problem I wrote about earlier,
in the text of the program "apt-mirror 0.5.4-1" commented line

775 sub process_index
776 {
...
814 if ( exists $lines{"Filename:"} )
{# Packages index
$skipclean{ remove_double_slashes( $path . "/" . 
$lines{"Filename:"} ) } = 1;
print FILES_ALL remove_double_slashes( $path . "/" . 
$lines{"Filename:"} ) . "\n";
print FILES_MD5 $lines{"MD5sum:"} . "  " . remove_double_slashes( 
$path . "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"MD5sum:"};
print FILES_SHA1 $lines{"SHA1:"} . "  " . remove_double_slashes( 
$path . "/" . $lines{"Filename:"} ) . "\n" if defined $lines{"SHA1:"};
print FILES_SHA256 $lines{"SHA256:"} . "  " . 
remove_double_slashes( $path . "/" . $lines{"Filename:"} ) . "\n" if defined 
$lines{"SHA256:"};
if ( need_update( $mirror . "/" . $lines{"Filename:"}, 
$lines{"Size:"} ) )
{
print FILES_NEW remove_double_slashes( $uri . "/" . 
$lines{"Filename:"} ) . "\n";
add_url_to_download( $uri . "/" . $lines{"Filename:"}, 
$lines{"Size:"} );
}
}
827 #else  # my comment
elsif ( exists $lines{"Files:"} )  # my insert
{# Sources index
foreach ( split( /\n/, $lines{"Files:"} ) )
{

After this change everything works fine and the message

Processing indexes: [SUse of uninitialized value $lines{"Files:"} in split 
at /usr/bin/apt-mirror line 829,  line 1.
Use of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror 
line 829,  line 2.
P]

no longer appears. 



Bug#934779: libreoffice: Not read the "About LibreOffice" window contents

2019-08-16 Thread Сергей Фёдоров
Thank you very much for the helpful link. It's nice that I'm not the only one 
faced with this problem. It is recognized in version 6.3.0.2 rc, but now 
Version: 6.3.0.4 and that
do something about it?

15.08.2019, 22:42, "Rene Engelhard" :
> forwarded 934779 https://bugs.documentfoundation.org/show_bug.cgi?id=126254
> tag 934779 + upstream
> thanks
>
> Hi,
>
> On Thu, Aug 15, 2019 at 09:28:12PM +0200, Rene Engelhard wrote:
>>  > background color of window is black, so pale gray letters
>>  > are almost invisible on a black background. Light gray background in the 
>> lower
>>  > left corner of the window, where black letters are clearly visible, takes 
>> only
>>  > about 10% of a window. In a 64-bit Debian 10 Sid if that window takes 
>> about
>>  > a quarter of the screen size, you can not see anything at all, if more, 
>> then
>>  > the lower left corner of the window begins to appear black letters on a 
>> light
>>  > gray background, but not completely.
>>
>>  I see black background except the buttons, but indeed when I resize
>>  "Lib..." starts to appear.
>>
>>  This appears only with libreoffice-gtk2 installed and not
>>  libreoffice-gtk3 installed. If libreoffice-gtk3 is installed, it just
>>  works )tested in xfce in said sid VM)
>
> This is already known upstream:
> https://bugs.documentfoundation.org/show_bug.cgi?id=126254
>
> Regards,
>
> Rene



Bug#931729: apt-mirror: SSUse of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror line 829

2019-08-15 Thread Сергей Фёдоров


Package: apt-mirror
Version: 0.5.4-1
Followup-For: Bug #931729

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.2.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages apt-mirror depends on:
ii  adduser  3.118
ii  perl 5.28.1-6
ii  wget 1.20.3-1+b1

apt-mirror recommends no packages.

apt-mirror suggests no packages.

-- Configuration Files:
/etc/apt/mirror.list changed:
set base_path /mnt/repo/debian/DebianMirror
set mirror_path  $base_path/mirror
set skel_path$base_path/skel
set var_path $base_path/var
set cleanscript $var_path/clean.sh
set defaultarch amd64
set run_postmirror  0
set nthreads   20
set tilde   0
debhttp://ftp.debian.org/debian jessie  main contrib non-free
deb-srchttp://ftp.debian.org/debian jessie  main contrib non-free
debhttp://ftp.debian.org/debian buster main contrib non-free
deb-srchttp://ftp.debian.org/debian buster main contrib non-free
debhttp://ftp.debian.org/debian  sid main contrib non-free
deb-srchttp://ftp.debian.org/debian  sid main contrib non-free
debhttp://ftp.debian.org/debian jessie-updates main contrib non-free
deb-srchttp://ftp.debian.org/debian jessie-updates main contrib non-free
debhttp://ftp.debian.org/debian buster-updates main contrib non-free
deb-srchttp://ftp.debian.org/debian buster-updates main contrib non-free
clean http://ftp.debian.org/debian


-- no debconf information

2019-08-15 15:00 What does it mean?

root@A1:/home/u1# apt-mirror; cd /mnt/repo/debian/DebianMirror/var/; ./clean.sh
Downloading 210 index files using 20 threads...
Begin time: Thu Aug 15 14:46:37 2019
[20]... [19]... [18]... [17]... [16]... [15]... [14]... [13]... [12]... [11]... 
[10]... [9]... [8]... [7]... [6]... [5]... [4]... [3]... [2]... [1]... [0]...
End time: Thu Aug 15 14:51:36 2019

Processing translation indexes: [T]

Downloading 120 translation files using 20 threads...
Begin time: Thu Aug 15 14:51:36 2019
[20]... [19]... [18]... [17]... [16]... [15]... [14]... [13]... [12]... [11]... 
[10]... [9]... [8]... [7]... [6]... [5]... [4]... [3]... [2]... [1]... [0]...
End time: Thu Aug 15 14:51:57 2019

Processing DEP-11 indexes: [D]

Downloading 30 dep11 files using 20 threads...
Begin time: Thu Aug 15 14:51:57 2019
[20]... [19]... [18]... [17]... [16]... [15]... [14]... [13]... [12]... [11]... 
[10]... [9]... [8]... [7]... [6]... [5]... [4]... [3]... [2]... [1]... [0]...
End time: Thu Aug 15 14:51:58 2019

Processing indexes: [SUse of uninitialized value $lines{"Files:"} in split 
at /usr/bin/apt-mirror line 829,  line 1.
Use of uninitialized value $lines{"Files:"} in split at /usr/bin/apt-mirror 
line 829,  line 2.
P]

2.1 GiB will be downloaded into archive.
Downloading 1419 archive files using 20 threads...
Begin time: Thu Aug 15 14:52:17 2019
[20]... [19]... [18]... [17]... [16]... [15]... [14]... [13]... [12]... [11]... 
[10]... [9]... [8]... [7]... [6]... [5]... [4]... [3]... [2]... [1]... [0]...
End time: Thu Aug 15 17:10:12 2019

2.1 GiB in 1315 files and 13 directories can be freed.
Run /mnt/repo/debian/DebianMirror/var/clean.sh for this purpose.

Removing 1315 unnecessary files [2.1 GiB]...
[0%]..[38%]..[76%]done.

Removing 13 unnecessary directories...
[0%].done.



Bug#918276: (no subject)

2019-08-15 Thread Сергей Фёдоров
Vlc 3.0.3-1-0+deb9u1 works fine in Debian
Vlc 3.0.6-0+deb9u1 in Debian 9.9 Stretch Stable works fine
All other versions of Vlc, including 3.0.7.1-3 when opening media files
instantly hang Debian, so no log-files do not have time to form.

When I install Debian-64 10 Stable, it is installed by default
"parole 1.0.2-1", not VLC, which is suggestive.

Removed "parole 1.0.2-1" and installed packages:

lua5.2   5.2.4-1.1+b3

qt5-default  5.11.3+dfsg1-3
libqt5core5a 5.11.3+dfsg1-3
libqt5gui5   5.11.3+dfsg1-3
libqt5svg5-dev   5.11.3-2
libqt5widgets5   5.11.3+dfsg1-3
libqt5x11extras5-dev 5.11.3-2

libcairo2-dev1.16.0-4
libegl1  1.1.0-1
libgl1   1.1.0-1
libgles2 1.1.0-1
libva-drm2   2.5.0-1
libva-dev2.5.0-1
libva2   2.5.0-1
libva-x11-2  2.5.0-1
libwayland-dev   1.17.0-1
libwayland-client0   1.17.0-1
libwayland-egl1  1.17.0-1
libx11-dev   2:1.6.7-1
libx11-6 2:1.6.7-1

libjpeg62-turbo-dev  1:1.5.2-2+b1
libpng16-16  1.6.37-1
librsvg2-dev 2.44.14-1
libfontconfig1-dev   2.13.1-2
libfreetype6-dev 2.9.1-4
libfribidi-dev   1.0.5-3.1

liblua5.25.2.4-1.1+b3
liblua5.2-dev5.2.4-1.1+b3

liba52-0.7.4-dev 0.7.4-19
libavutil-dev7:4.1.4-1+b1
libavcodec-dev   7:4.1.4-1+b1
libavformat-dev  7:4.1.4-1+b1
libmatroska-dev  1.5.2-2
libmpeg2-4-dev   0.5.1-8
libmpg123-dev1.25.10-2
libogg-dev   1.3.2-1+b1
libopus-dev  1.3-1
libpostproc-dev  7:4.1.4-1+b1
libswscale-dev   7:4.1.4-1+b1
libtheora-dev1.1.1+dfsg.1-15

libxcb-composite0-dev  1.13.1-2
libxcb-keysyms1-dev0.4.0-1+b2
libxcb-randr0-dev  1.13.1-2
libxcb-xv0-dev 1.13.1-2
libxcb1-dev1.13.1-2

libass-dev   1:0.14.0-2
libaribb24-dev   1.0.3-2

Created a folder, entered it, unzipped the source archive
vlc-3.0.7.1.tar.xz.

And run the following commands:

./configure

If you need to reinstall VLC, and "make clean" gives error 2, it is necessary
remove the source folder and reinstall it from the archive, then make
goes well.

make -j&(nprocs)
sudo make install
ldconfig

And it worked. What is the problem, I have not found.


01.03.2019, 20:33, "Sebastian Ramacher" :
> Hi
>
> On 2019-02-26 12:17:30, Сергей Фёдоров wrote:
>>  Installed Debian 9.8 amd64 from scratch. In it in "stable" vlc 
>> 3.0.6-0+deb9u1
>>  works fine, but if you install vlc 3.0.6-1 from sid, when you open
>>  any video file Debian freezes and only the mouse cursor moves across the 
>> screen.
>>  I.e. everything in Debian to 9.6. In Debian 9.6, amd64 worked fine in
>>  "stable" vlc 3.0.3-1-0+deb9u1, and if you install vlc 3.0.5-1 from "sid", 
>> then when
>>  open any *.mp4 file Debian hangs on the screen and moves the cursor
>>  mice.
>
> We really need those logs. And when you upgraded to vlc from sid, did you 
> upgrade the rest of your
> system as well?
>
>>  If it does not open the video file, vlc --version, then it will report:
>>  VLC media player 3.0.6 Vetinari (revision 3.0.6-0-g5803e85f73)
>>  VLC version 3.0.6 Vetinari (3.0.6-0-g5803e85f73)
>>  Compiled by buildd on x86-ubc-01.debian.org (Jan 10 2019 19:03:32)
>>  Compiler: gcc version 8.2.0 (Debian 8.2.0-14)
>>  This program comes with NO WARRANTY, to the extent permitted by law.
>>  You may redistribute it under the terms of the GNU General Public License;
>>  see the file named COPYING for details.
>>  Written by the VideoLAN team; see the AUTHORS file.
>>
>>  I. e. not 3.0.6-1, but 3.0.6-0, which looks suspicious.
>
> Nothing suspicious here. That's just what git describe produces as version 
> information for the 3.0.6
> tag.
>
> Cheers
> --
> Sebastian Ramacher



Bug#934779: libreoffice: Not read the "About LibreOffice" window contents

2019-08-14 Thread Сергей Фёдоров
Package: libreoffice
Version: 1:6.3.0-2
Severity: normal

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 5.2.0-2-686-pae (SMP w/2 CPU cores)
Kernel taint flags: TAINT_UNSIGNED_MODULE
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages libreoffice depends on:
ii  libreoffice-base1:6.3.0-2
ii  libreoffice-calc1:6.3.0-2
ii  libreoffice-core1:6.3.0-2
ii  libreoffice-draw1:6.3.0-2
ii  libreoffice-impress 1:6.3.0-2
ii  libreoffice-math1:6.3.0-2
ii  libreoffice-report-builder-bin  1:6.3.0-2
ii  libreoffice-writer  1:6.3.0-2
ii  python3-uno 1:6.3.0-2

Versions of packages libreoffice recommends:
ii  fonts-crosextra-caladea 20130214-2
ii  fonts-crosextra-carlito 20130920-1
ii  fonts-dejavu2.37-1
ii  fonts-liberation1:1.07.4-10
pn  fonts-liberation2   
ii  fonts-linuxlibertine5.3.0-4
pn  fonts-noto-core 
ii  fonts-noto-mono 20181227-1
pn  fonts-noto-ui-core  
ii  fonts-sil-gentium-basic 1.102-1
ii  libreoffice-java-common 1:6.3.0-2
ii  libreoffice-nlpsolver   0.9+LibO6.3.0-2
ii  libreoffice-report-builder  1:6.3.0-2
ii  libreoffice-script-provider-bsh 1:6.3.0-2
ii  libreoffice-script-provider-js  1:6.3.0-2
ii  libreoffice-script-provider-python  1:6.3.0-2
ii  libreoffice-sdbc-mysql  1:6.3.0-2
ii  libreoffice-sdbc-postgresql 1:6.3.0-2
ii  libreoffice-wiki-publisher  1.2.0+LibO6.3.0-2

Versions of packages libreoffice suggests:
ii  cups-bsd2.2.10-6
ii  default-jre [java6-runtime] 2:1.11-72
ii  firefox-esr 60.8.0esr-1
ii  ghostscript 9.27~dfsg-3
ii  gnupg   2.2.17-3
pn  gpa 
ii  gstreamer1.0-libav  1.16.0-2
ii  gstreamer1.0-plugins-bad1.16.0-2
ii  gstreamer1.0-plugins-base   1.16.0-2
ii  gstreamer1.0-plugins-good   1.16.0-2+b1
ii  gstreamer1.0-plugins-ugly   1.16.0-2
ii  hunspell-en-us [hunspell-dictionary]1:2018.04.16-1
ii  hyphen-en-us [hyphen-hyphenation-patterns]  2.8.8-7
ii  imagemagick 8:6.9.10.23+dfsg-2.1
ii  imagemagick-6.q16 [imagemagick] 8:6.9.10.23+dfsg-2.1
ii  libgl1  1.1.0-1
pn  libreoffice-gnome | libreoffice-kde5
pn  libreoffice-grammarcheck
pn  libreoffice-help
pn  libreoffice-l10n
ii  libreoffice-librelogo   1:6.3.0-2
pn  libreoffice-officebean  
ii  libsane 1.0.27-3.2
ii  libxrender1 1:0.9.10-1
pn  myspell-dictionary  
ii  mythes-en-us [mythes-thesaurus] 1:6.3.0-1
pn  openclipart2-libreoffice | openclipart-libreoffice  
ii  openjdk-11-jre [java6-runtime]  11.0.4+11-1
ii  openjdk-8-jre [java6-runtime]   8u222-b10-1
pn  pstoedit
pn  unixodbc

Versions of packages libreoffice-core depends on:
ii  fontconfig  2.13.1-2
ii  fonts-opensymbol2:102.11+LibO6.3.0-2
ii  libboost-date-time1.67.01.67.0-13
ii  libboost-locale1.67.0   1.67.0-13
ii  libc6   2.28-10
ii  libcairo2   1.16.0-4
ii  libclucene-contribs1v5  2.3.3.4+dfsg-1
ii  libclucene-core1v5  2.3.3.4+dfsg-1
ii  libcmis-0.5-5v5 0.5.2-1
ii  libcups22.2.10-6
ii  libcurl3-gnutls 7.65.3-1
ii  libdbus-1-3 1.12.16-1
ii  libdconf1   0.30.1-2
ii  libeot0 0.01-5
ii  libepoxy0   1.5.3-0.1
ii  libexpat1   2.2.7-1
ii  libexttextcat-2.0-0 3.4.5-1
ii  libfontconfig1  2.13.1-2
ii  libfreetype62.9.1-4
ii  libgcc1 1:9.1.0-10
ii  libglib2.0-02.60.6-1
ii  libgpgmepp6  

Bug#934755: menulibre 2.2.0-2 does not start on debian 10

2019-08-14 Thread Сергей Фёдоров
Package: menulibre
Version: 2.2.0-2
Severity: normal

-- System Information:
Debian Release: bullseye/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 5.2.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages menulibre depends on:
ii  gir1.2-gdkpixbuf-2.0  2.38.1+dfsg-1
ii  gir1.2-glib-2.0   1.58.3-2
ii  gir1.2-gmenu-3.0  3.32.0-1
ii  gir1.2-gtk-3.03.24.10-1
ii  gnome-menus   3.32.0-1
ii  python3   3.7.3-1
ii  python3-gi3.32.2-1
ii  python3-psutil5.5.1-1
ii  xdg-utils 1.1.3-1

menulibre recommends no packages.

menulibre suggests no packages.

-- no debconf information

Menulibre writes on start in terminal window:

(menulibre:6937): Gtk-WARNING **: 12:58:15.804: gtk_menu_attach_to_widget(): 
menu already attached to GtkMenuButton
(menulibre:6937): Gtk-WARNING **: 12:58:15.860: gtk_menu_attach_to_widget(): 
menu already attached to GtkMenuButton
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/menulibre/MenulibreApplication.py", line 
2217, in do_activate
self.win = MenulibreWindow(self, headerbar)
  File "/usr/lib/python3/dist-packages/menulibre/MenulibreApplication.py", line 
250, in __init__
self.configure_application_treeview(builder)
  File "/usr/lib/python3/dist-packages/menulibre/MenulibreApplication.py", line 
589, in configure_application_treeview
self.treeview = MenulibreTreeview.Treeview(self, builder)
  File "/usr/lib/python3/dist-packages/menulibre/MenulibreTreeview.py", line 
48, in __init__
self._configure_treeview(builder)
  File "/usr/lib/python3/dist-packages/menulibre/MenulibreTreeview.py", line 
59, in _configure_treeview
treestore = MenuEditor.get_treestore()
  File "/usr/lib/python3/dist-packages/menulibre/MenuEditor.py", line 123, in 
get_treestore
return menu_to_treestore(treestore, None, menu)
  File "/usr/lib/python3/dist-packages/menulibre/MenuEditor.py", line 100, in 
menu_to_treestore
tooltip = escapeText(item[2]['comment'])
  File "/usr/lib/python3/dist-packages/menulibre/util.py", line 99, in 
escapeText
return GLib.markup_escape_text(text, len(text))
  File "/usr/lib/python3/dist-packages/gi/overrides/GLib.py", line 418, in 
markup_escape_text
return GLib.markup_escape_text(text, length)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xd0 in position 27: 
unexpected end of data

... and does not start.

If this packets have a version 2.58.3-2, menulibre executes.
But for packets version 2.60.5-1, 2.60.6-2 menulibre does not start:
  libglib2.0-0
  libglib2.0-bin
  libglib2.0-dev
  libglib2.0-dev-bin

On TabletPC Acer Iconiatab W500 (Debian 10 32-bit) menulibre does not execute
also with same error messages.



Bug#918276: (no subject)

2019-02-26 Thread Сергей Фёдоров
Installed Debian 9.8 amd64 from scratch. In it in "stable" vlc 3.0.6-0+deb9u1
works fine, but if you install vlc 3.0.6-1 from sid, when you open
any video file Debian freezes and only the mouse cursor moves across the screen.
I.e. everything in Debian to 9.6. In Debian 9.6, amd64 worked fine in
"stable" vlc 3.0.3-1-0+deb9u1, and if you install vlc 3.0.5-1 from "sid", then 
when
open any *.mp4 file Debian hangs on the screen and moves the cursor
mice.

If it does not open the video file, vlc --version, then it will report:
VLC media player 3.0.6 Vetinari (revision 3.0.6-0-g5803e85f73)
VLC version 3.0.6 Vetinari (3.0.6-0-g5803e85f73)
Compiled by buildd on x86-ubc-01.debian.org (Jan 10 2019 19:03:32)
Compiler: gcc version 8.2.0 (Debian 8.2.0-14)
This program comes with NO WARRANTY, to the extent permitted by law.
You may redistribute it under the terms of the GNU General Public License;
see the file named COPYING for details.
Written by the VideoLAN team; see the AUTHORS file.

I. e. not 3.0.6-1, but 3.0.6-0, which looks suspicious.



Bug#923131: golang-1.11-src: errors when building the go compiler from golang-1.11-src package sources (1.11.5-1)

2019-02-24 Thread Сергей Фёдоров
Package: golang-1.11-src
Version: 1.11.5-1
Severity: normal

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-8-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

-- no debconf information

In debian-9.8.0-amd64 Sid install the packages:
golang-1.11-go
Go programming language compiler, linker, compiled stdlib
version: 1.11.5-1
golang-1.11-src
Go programming language - source files
version: 1.11.5-1
Make dir «/home/u1/go-1.11-5/»
Copy there the contents of the folder «/usr/share/go-1.11/»
Copy there «/usr/lib/go-1.11/VERSION»
Go to the folder "/ home/u1 / go-1.11-5/src " and create a file "build.sh" with 
such text:
export GOROOT_BOOTSTRAP=/usr/lib/go-1.11/
./all.bash
Start «./build.sh»
It is issued the error:
ok text/template/parse 0.017s
panic: cannot load America/Los_Angeles for testing: open 
/home/u1/go-1.11-5/lib/time/zoneinfo.zip: no such file or directory
goroutine 1 [running]:
time.initTestingZone()
/home/u1/go-1.11-5/src/time/internal_test.go:15 +0x19c
sync.(*Once).Do(0x7b2e90, 0x61ca50)
/home/u1/go-1.11-5/src/sync/once.go:44 +0xb3
time.ForceUSPacificForTesting()
/home/u1/go-1.11-5/src/time/export_test.go:18 +0x87
time.init.0()
/home/u1/go-1.11-5/src/time/internal_test.go:9 +0x20
FAIL time 0.021s
...
ok unicode 0.028s
ok cmd/vendor/golang.org/x/sys/unix 0.361s
ok cmd/vet 1.876s
ok cmd/vet/internal/cfg 0.001s
2019/02/21 23:11:40 Failed: exit status 1
Start terminal.
Make dir «/home/u1/go_bootstrap/» and pass into it.
Download through Firefox from «https://golang.org/dl/» 
«go1.11.5.linux-amd64.tar.gz».
Copy from archive the files from the dir «go» to the dir root 
«/home/u1/go_bootstrap/».
Pass to «/home/u1».
Run «git clone https://go.googlesource.com/go».
In «/home/u1» make dir «go» and copy to that the source files «go 1.11.5».
Pass to the dir «/home/u1/go/src» and create file «build.sh» with such text:
export GOROOT_BOOTSTRAP=/usr/lib/go-1.11/
./all.bash
Start «./build.sh»
Assembly and tests pass normally.
./all.bash (assembly and tests) pass normally when gdb is installed (GNU 
Debugger) version 7.12-6, and at version 8.2.1-1 gives error messages:
ok cmd/vendor/golang.org/x/sys/unix 0.361s
ok cmd/vet 1.876s
ok cmd/vet/internal/cfg 0.001s
2019/02/21 23:11:40 Failed: exit status 1
Delete the packages «golang-1.11-go», «golang-1.11-src»
Pass to dir «/home/u1/go/src» and create file «build.sh» with such text:
export GOROOT_BOOTSTRAP=go_bootstrap
./all.bash
Run «./build.sh»
Assembly and tests pass normally.
./all.bash (assembly and tests) pass normally when gdb is installed gdb (GNU 
Debugger) version 7.12-6, and at version 8.2.1-1 gives error messages:
ok cmd/vendor/golang.org/x/sys/unix 0.361s
ok cmd/vet 1.876s
ok cmd/vet/internal/cfg 0.001s
2019/02/21 23:11:40 Failed: exit status 1
The source files of the package «golang-1.11-src» 1.11.5-1 are older then 
https://golang.org/dl/ for Source go1.11.5.src.tar.gz (20MB).



Bug#923129: golang-1.11-src: errors when building the go compiler from golang-1.11-src package sources (1.11.5-1)(Без темы)

2019-02-24 Thread Сергей Фёдоров
Package: golang-1.11-src
Version: 1.11.5-1
Severity: normal



-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-8-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

-- no debconf information

In debian-9.8.0-amd64 Sid install the packages:
golang-1.11-go
Go programming language compiler, linker, compiled stdlib
version: 1.11.5-1
golang-1.11-src
Go programming language - source files
version: 1.11.5-1
Make dir «/home/u1/go-1.11-5/»
Copy there the contents of the folder «/usr/share/go-1.11/»
Copy there «/usr/lib/go-1.11/VERSION»
Go to the folder "/ home/u1 / go-1.11-5/src " and create a file "build.sh" with 
such text:
export GOROOT_BOOTSTRAP=/usr/lib/go-1.11/
./all.bash
Start «./build.sh»
It is issued the error:
ok text/template/parse  0.017s
panic: cannot load America/Los_Angeles for testing: open 
/home/u1/go-1.11-5/lib/time/zoneinfo.zip: no such file or directory
goroutine 1 [running]:
time.initTestingZone()
/home/u1/go-1.11-5/src/time/internal_test.go:15 +0x19c
sync.(*Once).Do(0x7b2e90, 0x61ca50)
/home/u1/go-1.11-5/src/sync/once.go:44 +0xb3
time.ForceUSPacificForTesting()
/home/u1/go-1.11-5/src/time/export_test.go:18 +0x87
time.init.0()
/home/u1/go-1.11-5/src/time/internal_test.go:9 +0x20
FAILtime0.021s
...
ok unicode  0.028s
ok cmd/vendor/golang.org/x/sys/unix 0.361s
ok cmd/vet  1.876s
ok cmd/vet/internal/cfg 0.001s
2019/02/21 23:11:40 Failed: exit status 1
Start terminal.
Make dir «/home/u1/go_bootstrap/» and pass into it.
Download through Firefox from «https://golang.org/dl/» 
«go1.11.5.linux-amd64.tar.gz».
Copy from archive the files from the dir «go» to the dir root 
«/home/u1/go_bootstrap/».
Pass to «/home/u1».
Run «git clone https://go.googlesource.com/go».
In «/home/u1» make dir «go» and copy to that the source files «go 1.11.5».
Pass to the dir «/home/u1/go/src» and create file «build.sh» with such text:
export GOROOT_BOOTSTRAP=/usr/lib/go-1.11/
./all.bash
Start «./build.sh»
Assembly and tests pass normally.
./all.bash (assembly and tests) pass normally when gdb is installed (GNU 
Debugger) version 7.12-6, and at version 8.2.1-1 gives error messages:
ok cmd/vendor/golang.org/x/sys/unix 0.361s
ok cmd/vet  1.876s
ok cmd/vet/internal/cfg 0.001s
2019/02/21 23:11:40 Failed: exit status 1
Delete the packages «golang-1.11-go», «golang-1.11-src»
Pass to dir «/home/u1/go/src» and create file «build.sh» with such text:
export GOROOT_BOOTSTRAP=go_bootstrap
./all.bash
Run «./build.sh»
Assembly and tests pass normally.
./all.bash (assembly and tests) pass normally when gdb is installed gdb (GNU 
Debugger) version 7.12-6, and at version 8.2.1-1 gives error messages:
ok cmd/vendor/golang.org/x/sys/unix 0.361s
ok cmd/vet  1.876s
ok cmd/vet/internal/cfg 0.001s
2019/02/21 23:11:40 Failed: exit status 1
The source files of the package «golang-1.11-src» 1.11.5-1 are older then 
https://golang.org/dl/ for Source go1.11.5.src.tar.gz (20MB).



Bug#918276: vlc: When you open VLC 3.0.5-1 any .mp4 file a Debian 9.6 hangs

2019-01-06 Thread Сергей Фёдоров
In Debian 9.6 Sid after trying to open any .mp4-file in VLC  3.0.5-2 Debian 
hangs immediately before first frame is displaing (only the mouse cursor can be 
moved around the screen, the keybord and mouse buttons are locked) and only 
reinstalling Debian from CD or USB is resolved the situation. The same thing 
happened for all versions VLC above 3.0.3-1-0+deb9u1. Then I reinstall Debian 
and install from Stretch repository VLC  3.0.3-1-0+deb9u1, normally open the 
same .mp4 file and everything is displayed normally.

It Turn out that in Debian Sid I use Mesa-drivers:

mesa-common-dev v. 18.2.8-2 (Developer documentation for Mesa)
mesa-utils v. 8.4.0-1+b1 (Mesa GL different utilities)
mesa-va-drivers v. 18.2.8-2 (Mesa VA-API video acceleration drivers)
mesa-vdpau-drivers v. 18.2.8-2 (Mesa VDPAU video acceleration drivers)

Through Sebastian Ramacher's questions i decided to install Nvidea driver.

Nvidia-detect v. 390.87-5 from Debain Sid reports:

Detected NVIDIA GPUs:
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G73 [GeForce 7300 
GT] [10de:0393] (rev a1)
Checking card:  NVIDIA Corporation G73 [GeForce 7300 GT] (rev a1)
Your card is only supported by the 304 legacy drivers series, which is only 
available up to stretch.

But I agreed not with nvidia-detect and installed from Sid resitory Nvidia 
packets:

glx-alternative-nvidia (0.9.0)
glx-diversions (0.9.0)
libegl-nvidia0 (390.87-5)
libgl1-nvidia-glvnd-glx (390.87-5)
libgles-nvidia1 (390.87-5)
libgles-nvidia2 (390.87-5)
libglx-nvidia0 (390.87-5)
libnvidia-cfg1 (390.87-5)
libnvidia-ml1 (390.87-5)
nvidia-alternative (390.87-5)
nvidia-driver (390.87-5)
nvidia-driver-bin (390.87-5)
nvidia-driver-libs (390.87-5)
nvidia-egl-common (390.87-5)
nvidia-egl-icd (390.87-5)
nvidia-installer-cleanup (20151021+8)
nvidia-kernel-common (20151021+8)
nvidia-kernel-dkms (390.87-5)
nvidia-kernel-support (390.87-5)
nvidia-legacy-check (390.87-5)
nvidia-modprobe (390.25-1)
nvidia-persistenced (390.25-1)
nvidia-settings (390.67-1)
nvidia-support (20151021+8)
nvidia-vdpau-driver (390.87-5)
nvidia-vulkan-common (390.87-5)
nvidia-vulkan-icd (390.87-5)
xserver-xorg-video-nvidia (390.87-5)

I rebooted Debian and beheld that monitor resolution is set to  1024x768 
insteed 1280x1024, what was with the mesa-drivers (the same is going and with 
nvidia-legacy-304xx-driver metapackage v. 304.137-6 and with 
nvidia-legacy-340xx-driver NVIDIA metapackage 340xx legacy version v. 340.107-3 
install. Both versions from Sid repository). I started Aegisub for subtitles 
correction, but Aegisub issued an error message:

An assertion failed!
../src/unix/glx11.cpp(589): assert "ok" failed in GetGLXVersion(): GLX version 
not found

and stopped working.

I installed  VLC 3.0.5-2 and open in it arbitrary .mp4 file. A file is opened 
and VLC became normally display .mp4 file but in lower resolution 1024x768 (I 
remember in mesa — 1280x1024). I desided to check what Debian is going under 
stress: went to the local Debian repository and start under root its copying 
about 340 Gb «cp Rp . "/some dir/"». VLC worked normally but mouse cursor 
through switch to different tasks freezed fore a some seconds, that was not 
going under mesa-drivers. I stopped VLC, stopped copying, deleted libvlc* and 
vlc* packets of  3.0.5-2 version and installed  VLC  3.0.3-1-0+deb9u1 from  
Stretch repository.

Results: for my video card Asus EN7300GT/Silent/HTD/256M/A in VLC version 
higher 3.0.3-1-0+deb9u1 Debian hangs not  at the .mp4 file opening with 
NVIDIA-drivers only (hangs for mesa drivers only). But herewith video card is 
installed more lowed resolution -  1024x768 for 19"-monitor insteed  1280x1024, 
it stops working subtitles correction programm Aegisub, Debian behaves more 
slowly under stress on nvidia-drivers, then under mesa-drivers. I think, that 
«www.videolan.org» is necessary to pay attention to it and to give the chance 
(as before) to work VLC under mesa-drivers.



Bug#918276: vlc: When you open VLC 3.0.5-1 any .mp4 file a Debian 9.6 hangs

2019-01-05 Thread Сергей Фёдоров
I have VideoCard Asus EN7300GT/Silent/HTD/256M/A without any GPU.
With vlc 3.0.5-1 if i open any .mp4 file Debian hangs instantly. I dont know 
why it can to have a log from 'vlc -vv' in this situation. But all works for 
vlc 3.0.3-1-0+deb9u1.



Bug#918276: vlc: When you open VLC 3.0.5-1 any .mp4 file a Debian 9.6 hangs

2019-01-04 Thread Сергей Фёдоров
Package: vlc
Version: 3.0.5-1
Severity: critical
Tags: a11y
Justification: breaks the whole system
 
When I install vlc 3.0.3-1-0+deb9u1 any .mp4 file is opening and showing
normally. But when i install vlc 3.0.5-1 a any attempt open any .mp4 file
a Debian 9.6 hangs. A Debian 9.6 hangs for all vlc version above
3.0.3-1-0+deb9u1.
 
--- vlc 3.0.5-1 -
 
-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
 
Kernel: Linux 4.19.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
 
Versions of packages vlc depends on:
ii  vlc-bin  3.0.5-1
ii  vlc-plugin-base  3.0.5-1
ii  vlc-plugin-qt3.0.5-1
ii  vlc-plugin-video-output  3.0.5-1
 
Versions of packages vlc recommends:
ii  vlc-l10n  3.0.5-1
ii  vlc-plugin-notify  3.0.5-1
ii  vlc-plugin-samba  3.0.5-1
ii  vlc-plugin-skins2  3.0.5-1
ii  vlc-plugin-video-splitter  3.0.5-1
ii  vlc-plugin-visualization  3.0.5-1
 
vlc suggests no packages.
 
Versions of packages libvlc-bin depends on:
ii  libc62.28-4
ii  libvlc5  3.0.5-1
 
Versions of packages libvlc5 depends on:
ii  libc62.28-4
ii  libvlccore9  3.0.5-1
 
Versions of packages libvlc5 recommends:
ii  libvlc-bin  3.0.5-1
 
Versions of packages vlc-bin depends on:
ii  libc6  2.28-4
ii  libvlc-bin  3.0.5-1
ii  libvlc53.0.5-1
 
Versions of packages vlc-plugin-base depends on:
ii  liba52-0.7.40.7.4-19
ii  libaom0  1.0.0-3
ii  libarchive133.3.3-2
ii  libaribb24-01.0.3-2
ii  libasound2  1.1.7-2
ii  libass9  1:0.14.0-2
ii  libavahi-client30.7-4+b1
ii  libavahi-common30.7-4+b1
ii  libavc1394-00.5.4-5
ii  libavcodec587:4.1-1
ii  libavformat587:4.1-1
ii  libavutil56  7:4.1-1
ii  libbasicusageenvironment12018.11.26-1
ii  libbluray2  1:1.0.2-3
ii  libc62.28-4
ii  libcairo21.16.0-2
ii  libcddb21.3.2-6
ii  libchromaprint1  1.4.3-2+b1
ii  libcrystalhd31:0.0~git20110715.fdd2f19-13
ii  libdbus-1-3  1.12.12-1
ii  libdc1394-222.2.5-1
ii  libdca0  0.0.6-1
ii  libdvbpsi10  1.3.2-1
ii  libdvdnav4  6.0.0-1
ii  libdvdread4  6.0.0-1
ii  libebml4v5  1.3.6-2
ii  libfaad22.8.8-1
ii  libflac81.3.2-3
ii  libfontconfig1  2.13.1-2
ii  libfreetype62.9.1-3
ii  libfribidi0  1.0.5-3
ii  libgcc1  1:8.2.0-13
ii  libgcrypt20  1.8.4-4
ii  libglib2.0-02.58.2-3
ii  libgnutls30  3.6.5-2
ii  libgpg-error01.33-3
ii  libgroupsock82018.11.26-1
ii  libharfbuzz0b2.3.0-1
ii  libixml101:1.8.4-2
ii  libjpeg62-turbo  1:1.5.2-2+b1
ii  libkate10.4.1-8
ii  liblirc-client0  0.10.1-4
ii  liblivemedia64  2018.11.26-1
ii  liblua5.2-0  5.2.4-1.1+b2
ii  libmad0  0.15.1b-9
ii  libmatroska6v5  1.4.9-1
ii  libmicrodns00.0.10-1
ii  libmpcdec6  2:0.1~r495-1+b2
ii  libmpeg2-4  0.5.1-8
ii  libmpg123-0  1.25.10-2
ii  libmtp9  1.1.13-1.1
ii  libncursesw66.1+20181013-1
ii  libnfs112.0.0-1~exp1
ii  libogg0  1.3.2-1+b1
ii  libopenmpt-modplug1  0.4.0-1
ii  libopus01.3-1
ii  libpng16-16  1.6.36-2
ii  libpostproc557:4.1-1
ii  libprotobuf-lite17  3.6.1.3-1
ii  libpulse012.2-2
ii  libraw1394-112.1.2-1+b1
ii  libresid-builder0c2a2.1.1-15
ii  librsvg2-2  2.44.10-1
ii  libsamplerate0  0.1.9-2
ii  libsdl-image1.2  1.2.12-10
ii  libsdl1.2debian  1.2.15+dfsg2-4
ii  libsecret-1-0  

Bug#918271: Why does Debian start every process with low max priority in Linux

2019-01-04 Thread Сергей Фёдоров
Package: src:linux
Version: 4.19.13-1
Severity: normal
Tags: a11y

I update by apt-mirror Debian repository on local disk. Next I update by apt my 
local Debian. From time to time I copy a repository to another local disk by 
command «#cp -Rp . 'to_some_directory'" by size 340Gb.

I have : Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz multi-core (c=4), 
hyper-threaded (t=2). 32 Gb memory.

Before appearance a kernel «linux-image-4.19.0-1-amd64 Linux 4.19 for 64-bit 
PCs (signed) ver. 4.19.13-1»  in flowing copy period the start of new processes 
start, the switch between current processes and the work in they is very slow 
down and it is impossible to work in Debian. After apperance a kernel  4.19 the 
problen is smoothed out to an acceptable, but still the start of new processes 
holds some seconds.

Why does Debian start every process with low max priority in Linux 20 , but not 
19 or 18 at least because it needs to begin the process with more low priority 
or reduce there priority if it will be need.



Bug#917604: libavcodec57 v. 7:3.4.3-1 has depended from libx264-152

2018-12-28 Thread Сергей Фёдоров
Package: libavcodec57
Version: 7:3.4.3-1
Severity: important
Tags: a11y

Dear Maintainer,

When it is installed a packet libavcodec57 v. 7:3.4.3-1
(FFmpeg library with de/encoders for audio/video codecs - runtime files)
it is issued a message «It has depended from libx264-152  but it is not
 installable», but  there is «libx264-148» or «libx264-155» only.

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages libavcodec57 depends on:
ii  libavutil55 7:3.4.3-1
ii  libc6   2.28-3
ii  libcairo2   1.16.0-2
ii  libcrystalhd3   1:0.0~git20110715.fdd2f19-13
ii  libglib2.0-0    2.58.1-2
ii  libgsm1 1.0.13-4+b2
ii  liblzma5    5.2.2-1.3
ii  libmp3lame0 3.100-2+b1
ii  libopenjp2-7    2.3.0-1.1
ii  libopus0    1.3-1
ii  librsvg2-2  2.44.10-1
ii  libshine3   3.1.1-2
ii  libsnappy1v5    1.1.7-1
ii  libspeex1   1.2~rc1.2-1+b2
ii  libswresample2  7:3.4.3-1
ii  libtheora0  1.1.1+dfsg.1-14+b1
ii  libtwolame0 0.3.13-4
ii  libva2  2.3.0-2
ii  libvorbis0a 1.3.6-1
ii  libvorbisenc2   1.3.6-1
ii  libvpx5 1.7.0-3
ii  libwavpack1 5.1.0-5
ii  libwebp6    0.6.1-2
ii  libwebpmux3 0.6.1-2
pn  libx264-152 
ii  libx265-160 2.8-4
ii  libxvidcore4    2:1.3.5-1
ii  libzvbi0    0.2.35-15
ii  zlib1g  1:1.2.11.dfsg-1

libavcodec57 recommends no packages.

libavcodec57 suggests no packages.



Bug#907885: vlc: Debian 9.5 hangs when opening the mkv file in vlc 3.0.4-1

2018-09-03 Thread Сергей Фёдоров
To: sub...@bugs.debian.org
Subject: vlc: Debian 9.5 hangs when opening the mkv file in vlc 3.0.4-1
Package: vlc
Version: 3.0.4-1
Severity: critical
Justification: breaks the whole system
Tags: a11y

Debian 9.5 hangs when opening the mkv file in vlc 3.0.4-1

In Debian 9.5 Sid opening a media file {avi,mkv and others} in vlc 3.0.4-1 (and 
libvlc* 3.0.4-1)
opens a window with black content, the mouse cursor moves freely across the 
screen, but the keyboard
and mouse buttons are locked, i.e. Debian hangs.

When after rebooting we install vlc 3.0.2-0+deb9u1 (and libvlc* 3.0.2-0+deb9u1) 
(from the Debian 9.5 Stable repository)
everything works fine.

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.17.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages vlc depends on:
ii  vlc-bin  3.0.4-1
ii  vlc-plugin-base  3.0.4-1
ii  vlc-plugin-qt3.0.4-1
ii  vlc-plugin-video-output  3.0.4-1

Versions of packages vlc recommends:
ii  vlc-l10n   3.0.4-1
ii  vlc-plugin-notify  3.0.4-1
ii  vlc-plugin-samba   3.0.4-1
ii  vlc-plugin-skins2  3.0.4-1
ii  vlc-plugin-video-splitter  3.0.4-1
ii  vlc-plugin-visualization   3.0.4-1

vlc suggests no packages.

Versions of packages libvlc-bin depends on:
ii  libc62.27-5
ii  libvlc5  3.0.4-1

Versions of packages libvlc5 depends on:
ii  libc62.27-5
ii  libvlccore9  3.0.4-1

Versions of packages libvlc5 recommends:
ii  libvlc-bin  3.0.4-1

Versions of packages vlc-bin depends on:
ii  libc6   2.27-5
ii  libvlc-bin  3.0.4-1
ii  libvlc5 3.0.4-1

Versions of packages vlc-plugin-base depends on:
ii  liba52-0.7.4 0.7.4-19
ii  libarchive13 3.2.2-5
ii  libaribb24-0 1.0.3-2
ii  libasound2   1.1.6-1
ii  libass9  1:0.14.0-2
ii  libavahi-client3 0.7-4
ii  libavahi-common3 0.7-4
ii  libavc1394-0 0.5.4-5
ii  libavcodec58 7:4.0.2-1+b1
ii  libavformat587:4.0.2-1+b1
ii  libavutil56  7:4.0.2-1+b1
ii  libbasicusageenvironment12018.08.28a-1
ii  libbluray2   1:1.0.2-3
ii  libc62.27-5
ii  libcairo21.15.12-1
ii  libcddb2 1.3.2-6
ii  libchromaprint1  1.4.3-2+b1
ii  libcrystalhd31:0.0~git20110715.fdd2f19-13
ii  libdbus-1-3  1.12.10-1
ii  libdc1394-22 2.2.5-1
ii  libdca0  0.0.6-1
ii  libdvbpsi10  1.3.2-1
ii  libdvdnav4   6.0.0-1
ii  libdvdread4  6.0.0-1
ii  libebml4v5   1.3.6-2
ii  libfaad2 2.8.8-1
ii  libflac8 1.3.2-3
ii  libfontconfig1   2.13.0-5
ii  libfreetype6 2.8.1-2
ii  libfribidi0  1.0.5-3
ii  libgcc1  1:8.2.0-4
ii  libgcrypt20  1.8.3-1
ii  libglib2.0-0 2.58.0-1
ii  libgnutls30  3.5.19-1
ii  libgpg-error01.32-1
ii  libgroupsock82018.08.28a-1
ii  libharfbuzz0b1.8.8-2
ii  libjpeg62-turbo  1:1.5.2-2+b1
ii  libkate1 0.4.1-8
ii  liblirc-client0  0.10.0-2+b1
ii  liblivemedia62   2018.08.28a-1
ii  liblua5.2-0  5.2.4-1.1+b2
ii  libmad0  0.15.1b-9
ii  libmatroska6v5   1.4.9-1
ii  libmicrodns0 0.0.10-1
ii  libmpcdec6   2:0.1~r495-1+b2
ii  libmpeg2-4   0.5.1-8
ii  libmpg123-0  1.25.10-2
ii  libmtp9  1.1.13-1
ii  libncursesw6 6.1+20180714-1
ii  libnfs11 2.0.0-1~exp1
ii  libogg0  1.3.2-1+b1
ii  libopenmpt-modplug1  0.3.11-1
ii  libopus0 1.3~beta+20180518-1
ii  libpng16-16  1.6.34-2
ii  libpostproc557:4.0.2-1+b1
ii  libprotobuf-lite10   3.0.0-9.1
ii  libpulse012.0-1
ii  libraw1394-112.1.2-1+b1
ii  libresid-builder0c2a 2.1.1-15

Bug#907884: vlc: Debian 9.5 hangs when opening the mkv file in vlc 3.0.4-1

2018-09-03 Thread Сергей Фёдоров
To: sub...@bugs.debian.org
Subject: vlc: Debian 9.5 hangs when opening the mkv file in vlc 3.0.4-1
Package: vlc
Version: 3.0.4-1
Severity: critical
Justification: breaks the whole system
Tags: a11y

Debian 9.5 hangs when opening the mkv file in vlc 3.0.4-1

In Debian 9.5 Sid opening a media file {avi,mkv and others} in vlc 3.0.4-1 (and 
libvlc* 3.0.4-1)
opens a window with black content, the mouse cursor moves freely across the 
screen, but the keyboard
and mouse buttons are locked, i.e. Debian hangs.

When after rebooting we install vlc 3.0.2-0+deb9u1 (and libvlc* 3.0.2-0+deb9u1) 
(from the Debian 9.5 Stable repository)
everything works fine.

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.17.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages vlc depends on:
ii  vlc-bin  3.0.4-1
ii  vlc-plugin-base  3.0.4-1
ii  vlc-plugin-qt3.0.4-1
ii  vlc-plugin-video-output  3.0.4-1

Versions of packages vlc recommends:
ii  vlc-l10n   3.0.4-1
ii  vlc-plugin-notify  3.0.4-1
ii  vlc-plugin-samba   3.0.4-1
ii  vlc-plugin-skins2  3.0.4-1
ii  vlc-plugin-video-splitter  3.0.4-1
ii  vlc-plugin-visualization   3.0.4-1

vlc suggests no packages.

Versions of packages libvlc-bin depends on:
ii  libc62.27-5
ii  libvlc5  3.0.4-1

Versions of packages libvlc5 depends on:
ii  libc62.27-5
ii  libvlccore9  3.0.4-1

Versions of packages libvlc5 recommends:
ii  libvlc-bin  3.0.4-1

Versions of packages vlc-bin depends on:
ii  libc6   2.27-5
ii  libvlc-bin  3.0.4-1
ii  libvlc5 3.0.4-1

Versions of packages vlc-plugin-base depends on:
ii  liba52-0.7.4 0.7.4-19
ii  libarchive13 3.2.2-5
ii  libaribb24-0 1.0.3-2
ii  libasound2   1.1.6-1
ii  libass9  1:0.14.0-2
ii  libavahi-client3 0.7-4
ii  libavahi-common3 0.7-4
ii  libavc1394-0 0.5.4-5
ii  libavcodec58 7:4.0.2-1+b1
ii  libavformat587:4.0.2-1+b1
ii  libavutil56  7:4.0.2-1+b1
ii  libbasicusageenvironment12018.08.28a-1
ii  libbluray2   1:1.0.2-3
ii  libc62.27-5
ii  libcairo21.15.12-1
ii  libcddb2 1.3.2-6
ii  libchromaprint1  1.4.3-2+b1
ii  libcrystalhd31:0.0~git20110715.fdd2f19-13
ii  libdbus-1-3  1.12.10-1
ii  libdc1394-22 2.2.5-1
ii  libdca0  0.0.6-1
ii  libdvbpsi10  1.3.2-1
ii  libdvdnav4   6.0.0-1
ii  libdvdread4  6.0.0-1
ii  libebml4v5   1.3.6-2
ii  libfaad2 2.8.8-1
ii  libflac8 1.3.2-3
ii  libfontconfig1   2.13.0-5
ii  libfreetype6 2.8.1-2
ii  libfribidi0  1.0.5-3
ii  libgcc1  1:8.2.0-4
ii  libgcrypt20  1.8.3-1
ii  libglib2.0-0 2.58.0-1
ii  libgnutls30  3.5.19-1
ii  libgpg-error01.32-1
ii  libgroupsock82018.08.28a-1
ii  libharfbuzz0b1.8.8-2
ii  libjpeg62-turbo  1:1.5.2-2+b1
ii  libkate1 0.4.1-8
ii  liblirc-client0  0.10.0-2+b1
ii  liblivemedia62   2018.08.28a-1
ii  liblua5.2-0  5.2.4-1.1+b2
ii  libmad0  0.15.1b-9
ii  libmatroska6v5   1.4.9-1
ii  libmicrodns0 0.0.10-1
ii  libmpcdec6   2:0.1~r495-1+b2
ii  libmpeg2-4   0.5.1-8
ii  libmpg123-0  1.25.10-2
ii  libmtp9  1.1.13-1
ii  libncursesw6 6.1+20180714-1
ii  libnfs11 2.0.0-1~exp1
ii  libogg0  1.3.2-1+b1
ii  libopenmpt-modplug1  0.3.11-1
ii  libopus0 1.3~beta+20180518-1
ii  libpng16-16  1.6.34-2
ii  libpostproc557:4.0.2-1+b1
ii  libprotobuf-lite10   3.0.0-9.1
ii  libpulse012.0-1
ii  libraw1394-112.1.2-1+b1
ii  libresid-builder0c2a 2.1.1-15

Bug#907877: aegisub: installation libboost-regex1.62.0+dfsg-8 require to delete aegisub packet

2018-09-03 Thread Сергей Фёдоров
To: sub...@bugs.debian.org
Subject: aegisub: installation libboost-regex1.62.0+dfsg-8 require to delete 
aegisub packet
Package: aegisub
Version: 3.2.2+dfsg-3+b6
Severity: important
Tags: a11y

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.17.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages aegisub depends on:
ii  libasound2 1.1.6-1
ii  libass9    1:0.14.0-2
ii  libboost-filesystem1.62.0  1.62.0+dfsg-4
ii  libboost-locale1.62.0  1.62.0+dfsg-4
ii  libboost-regex1.62.0   1.62.0+dfsg-4
ii  libboost-system1.62.0  1.62.0+dfsg-4
ii  libboost-thread1.62.0  1.62.0+dfsg-4
ii  libc6  2.27-5
ii  libffms2-4 2.23-3+b1
ii  libfftw3-double3   3.3.8-1
ii  libfontconfig1 2.13.0-5
ii  libgcc1    1:8.2.0-4
ii  libgl1 1.1.0-1
ii  libgl1-mesa-glx    18.1.7-1
ii  libhunspell-1.6-0  1.6.2-1+b1
ii  libicu57   57.1-9
ii  libluajit-5.1-2    2.1.0~beta3+dfsg-5.1
ii  libpulse0  12.0-1
ii  libstdc++6 8.2.0-4
ii  libwxbase3.0-0v5   3.0.4+dfsg-4
ii  libwxgtk3.0-0v5    3.0.4+dfsg-4
ii  zlib1g 1:1.2.11.dfsg-1

aegisub recommends no packages.

Versions of packages aegisub suggests:
pn  aegisub-l10n  

-- no debconf information



Bug#907876: aegisub: installation libboost-regex1.62.0+dfsg-8 require to delete aegisub packet

2018-09-03 Thread Сергей Фёдоров
To: sub...@bugs.debian.org
Subject: aegisub: installation libboost-regex1.62.0+dfsg-8 require to delete 
aegisub packet
Package: aegisub
Version: 3.2.2+dfsg-3+b6
Severity: important
Tags: a11y

-- System Information:
Debian Release: buster/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.17.0-3-amd64 (SMP w/8 CPU cores)
Locale: LANG=ru_RU.utf8, LC_CTYPE=ru_RU.utf8 (charmap=UTF-8), 
LANGUAGE=ru_RU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages aegisub depends on:
ii  libasound2 1.1.6-1
ii  libass91:0.14.0-2
ii  libboost-filesystem1.62.0  1.62.0+dfsg-4
ii  libboost-locale1.62.0  1.62.0+dfsg-4
ii  libboost-regex1.62.0   1.62.0+dfsg-4
ii  libboost-system1.62.0  1.62.0+dfsg-4
ii  libboost-thread1.62.0  1.62.0+dfsg-4
ii  libc6  2.27-5
ii  libffms2-4 2.23-3+b1
ii  libfftw3-double3   3.3.8-1
ii  libfontconfig1 2.13.0-5
ii  libgcc11:8.2.0-4
ii  libgl1 1.1.0-1
ii  libgl1-mesa-glx18.1.7-1
ii  libhunspell-1.6-0  1.6.2-1+b1
ii  libicu57   57.1-9
ii  libluajit-5.1-22.1.0~beta3+dfsg-5.1
ii  libpulse0  12.0-1
ii  libstdc++6 8.2.0-4
ii  libwxbase3.0-0v5   3.0.4+dfsg-4
ii  libwxgtk3.0-0v53.0.4+dfsg-4
ii  zlib1g 1:1.2.11.dfsg-1

aegisub recommends no packages.

Versions of packages aegisub suggests:
pn  aegisub-l10n  

-- no debconf information