Bug#992346: elpa-org: install script from elpa-org package failed

[Damien Couroussé]

On 21/08/2021 04:31, David Bremner wrote:

Damien Couroussé  writes:


Hi David,

On 19/08/2021 20:31, David Bremner wrote:
The error appeared in two situations:

1. emacs 27 (currently in stable/bullseye) is already installed. Install
elpa-org (from stable as well, i.e. version 9.1.14+dfsg-3). Produces the
error as reported.

elpa-org in bullseye is 9.4.0+dfsg-1


You are right, my bad!


2. elpa-org is installed with emacs in old-stable.  Upgrade emacs to the
version in stable / bullseye.  The package elpa-org is upgraded as well,
producing the same error.  Produces the error as reported.

Are you certain elpa-org is upgraded to the version in bullseye?
(i.e. 9.4.0+dfsg-1)? I ask because that's not what your original report
said, and there is also some confusion above about what the version in
stable is.


Yes, my apologies!   I was in a case where I wanted to upgrade only 
emacs to get the fix for another bug.  And elpa-org was not upgraded in 
the process.


Maybe a dependency constraint should prevent elpa-org in 9.1.14+dfsg-3 
with emacs-27.

I agree that this will probaly rarely occur.

I let you decide if a fix is needed.  Feel free to close the bug 
accordingly.


best,
Damien

Bug#992346: elpa-org: install script from elpa-org package failed

[Damien Couroussé]

Hi David,

On 19/08/2021 20:31, David Bremner wrote:

I did another test in a schroot.  Here, the error was triggered by the
upgrade of the package 'emacs' from 1:26.1+1-3.2+deb10u2 to
1:27.1+1-3.1, with the package 'elpa-org' already installed.

I believe the issue is related to this package and not to the package
emacs, since the error only appears if the package 'elpa-org' is
installed, or going to be installed.

Are you doing an upgrade to bullseye / stable? Because that version of
emacs is not in oldstable, which is (roughly) what your bug report said.

Yes, the error appeared the first time when upgrading emacs to version 27.


There was some possibly related discussion about running emacs 27 in
buster on the backports list, you could check there.


The error appeared in two situations:

1. emacs 27 (currently in stable/bullseye) is already installed. Install 
elpa-org (from stable as well, i.e. version 9.1.14+dfsg-3). Produces the 
error as reported.
2. elpa-org is installed with emacs in old-stable.  Upgrade emacs to the 
version in stable / bullseye.  The package elpa-org is upgraded as well, 
producing the same error.  Produces the error as reported.


The issue did not occur with previous versions of elpa-org.



I found one discussion probably related to this bug report -- 
https://lists.debian.org/debian-backports/2021/02/msg00016.html
IIUC, the issue may be due to the fact that emacs-27 is now packaged 
with org-mode, which I didn't know.


I am not sure if this is the culprit, but it looks like emacs-27 and 
elpa-org provide possibly conflicting package files:


┌
│ $ dpkg -l elpa-org
│ iF  elpa-org   9.1.14+dfsg-3 all  Keep notes, maintain 
ToDo lists, and do project planning

│
│ $ dpkg -l emacs-common
│ ii  emacs-common   1:27.1+1-3.1 all  GNU Emacs editor's 
shared, architecture independent infras

│
│ $ dpkg -S /usr/share/emacs/27.1/lisp/org/ox-org.elc
│ emacs-common: /usr/share/emacs/27.1/lisp/org/ox-org.elc
│
│ $ dpkg -S /usr/share/emacs/site-lisp/elpa-src/org-9.1.14/ox-org.el
│ elpa-org: /usr/share/emacs/site-lisp/elpa-src/org-9.1.14/ox-org.el
└




best,
Damien

Bug#992346: elpa-org: install script from elpa-org package failed

[Damien Couroussé]

On 19/08/2021 13:35, Bastien wrote:

Package: elpa-org
Version: 9.1.14+dfsg-3
Severity: important

The package install fails with the following error message:

ERROR: install script from elpa-org package failed
dpkg: error processing package elpa-org (--configure):
  installed elpa-org package post-installation script subprocess
returned error exit status 1
Errors were encountered while processing:
  elpa-org
E: Sub-process /usr/bin/dpkg returned an error code (1)

I'm not sure what elpa-org is - is it the debian package for
installing Org using Org ELPA?


I was referring to the Debian package named 'elpa-org'.
This error was triggered by the install of the package.  More info in 
the output of the apt command, reproduced in the initial bug report.


I'm not familiar enough with the emacs packaging system to understand 
what is the root cause of this error.




I did another test in a schroot.  Here, the error was triggered by the 
upgrade of the package 'emacs' from 1:26.1+1-3.2+deb10u2 to 
1:27.1+1-3.1, with the package 'elpa-org' already installed.


I believe the issue is related to this package and not to the package 
emacs, since the error only appears if the package 'elpa-org' is 
installed, or going to be installed.



thanks,
Damien

Bug#992346: elpa-org: install script from elpa-org package failed

[Damien Couroussé]

Package: elpa-org
Version: 9.1.14+dfsg-3
Severity: important

The package install fails with the following error message:

ERROR: install script from elpa-org package failed
dpkg: error processing package elpa-org (--configure):
 installed elpa-org package post-installation script subprocess 
returned error exit status 1

Errors were encountered while processing:
 elpa-org
E: Sub-process /usr/bin/dpkg returned an error code (1)


Please find below the complete error log.

best,
Damien




-- System Information:
Debian Release: 10.10
  APT prefers oldstable-updates
  APT policy: (500, 'oldstable-updates'), (500, 'oldstable'), (200, 
'testing'), (100, 'unstable'), (10, 'experimental')

Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8), 
LANGUAGE=fr_FR.utf8 (charmap=UTF-8)

Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages elpa-org depends on:
ii  elpa-htmlize    1.54-1
ii  emacsen-common  3.0.4

Versions of packages elpa-org recommends:
ii  emacs  1:27.1+1-3~bpo10+1
ii  emacs-gtk [emacs]  1:27.1+1-3~bpo10+1

Versions of packages elpa-org suggests:
pn  ditaa  
ii  org-mode-doc   9.1.14-1
pn  texinfo    
ii  texlive-fonts-recommended  2018.20190227-2
ii  texlive-latex-extra    2018.20190227-2

-- no debconf information






# env LANG=C apt install elpa-org
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  elpa-htmlize
Suggested packages:
  ditaa texinfo
The following NEW packages will be installed:
  elpa-htmlize elpa-org
0 upgraded, 2 newly installed, 0 to remove and 219 not upgraded.
Need to get 0 B/1 080 kB of archives.
After this operation, 6 117 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Selecting previously unselected package elpa-htmlize.
(Reading database ... 348317 files and directories currently installed.)
Preparing to unpack .../elpa-htmlize_1.54-1_all.deb ...
Unpacking elpa-htmlize (1.54-1) ...
Selecting previously unselected package elpa-org.
Preparing to unpack .../elpa-org_9.1.14+dfsg-3_all.deb ...
Unpacking elpa-org (9.1.14+dfsg-3) ...
Setting up elpa-htmlize (1.54-1) ...
Install emacsen-common for emacs
emacsen-common: Handling install of emacsen flavor emacs
Install elpa-htmlize for emacs
install/htmlize-1.54: Handling install of emacsen flavor emacs
install/htmlize-1.54: byte-compiling for emacs
Setting up elpa-org (9.1.14+dfsg-3) ...
tsort: -: input contains a loop:
tsort: elpa-htmlize
tsort: emacsen-common
Install elpa-htmlize for emacs
install/htmlize-1.54: Handling install of emacsen flavor emacs
install/htmlize-1.54: byte-compiling for emacs
Install emacsen-common for emacs
emacsen-common: Handling install of emacsen flavor emacs
Install elpa-org for emacs
install/org-9.1.14: Handling install of emacsen flavor emacs
install/org-9.1.14: byte-compiling for emacs

In org-babel-open-src-block-result:
ob-core.el:1039:25:Warning: `org-bracket-link-regexp' is an obsolete 
variable

    (as of Org 9.3); use `org-link-bracket-re' instead.

In org-babel-sha1-hash:
ob-core.el:1227:8:Warning: function org-babel-sha1-hash used to take 0-2
    arguments, now takes 0-1

In org-babel-params-from-properties:
ob-core.el:1430:8:Warning: function org-babel-params-from-properties used to
    take 0-2 arguments, now takes 0-1

In org-babel-parse-header-arguments:
ob-core.el:1534:8:Warning: function org-babel-parse-header-arguments used to
    take 1-2 arguments, now takes 1

In org-babel-demarcate-block:
ob-core.el:1879:42:Warning: `org-get-indentation' is an obsolete 
function (as

    of Org 9.2); use `current-indentation' instead.

In org-babel-read-element:
ob-core.el:2086:28:Warning: `org-bracket-link-regexp' is an obsolete 
variable

    (as of Org 9.3); use `org-link-bracket-re' instead.

In org-babel-read-link:
ob-core.el:2128:32:Warning: `org-bracket-link-regexp' is an obsolete 
variable

    (as of Org 9.3); use `org-link-bracket-re' instead.

In org-babel-insert-result:
ob-core.el:2276:33:Warning: `org-get-indentation' is an obsolete 
function (as

    of Org 9.2); use `current-indentation' instead.

In org-babel-result-end:
ob-core.el:2473:51:Warning: `org-bracket-link-regexp' is an obsolete 
variable

    (as of Org 9.3); use `org-link-bracket-re' instead.

In org-babel-update-block-body:
ob-core.el:2539:18:Warning: `org-get-indentation' is an obsolete 
function (as

    of Org 9.2); use `current-indentation' instead.

In org-babel-exp-process-buffer:
ob-exp.el:247:36:Warning: `org-get-indentation' is an obsolete function 
(as of

    Org 9.2); use `current-indentation' instead.

In org-babel-execute:haskell:
ob-haskell.el:86:22:Warning: `org-babel-strip-quotes' is an obsolete 

Bug#954650: AttributeError: module 'certbot.plugins.common' has no attribute 'TLSSNI01'

[Damien Couroussé]

On 24/03/2020 23:52, Harlan Lieberman-Berg wrote:
>> I could fix the issue by upgrading python3-certbot-apache to version
>> 1.1.0-1.
> Hi Damien,
> 
> Yes, these two versions are not fully compatible.  I didn't put in a
> version restriction because mixing packages from testing into a stable
> installation can result in breakage (such as you've ran into).  If you
> really want to do so, make sure that you pull not only the package
> from testing, but all the things that reverse-depend on it.  For
> certbot, the easiest way to do that is to specify that you want to
> install the leaf package from testing (python3-certbot-apache), rather
> than the middle package (certbot, or python3-certbot).  That should
> reliably upgrade certbot itself, if it's necessary to do so.
> 
> That said, I'll talk with upstream and see if I can add some level of
> version protection to keep it from happening in the future.

As a standard user, this is not the behavior that I would expect from
the package manager.  I can usually safely mix packages from stable,
testing and more thanks to a proper apt pinning configuration, and the
package manager tells me if I can upgrade a package e.g. from testing
without wrecking havoc my system.  But I understand your point of view
and the solution chosen.

Thank you for your feedback!

kind regards,

Bug#954650: AttributeError: module 'certbot.plugins.common' has no attribute 'TLSSNI01'

[Damien Couroussé]

Package: certbot
Version: 1.1.0-1
Severity: important

Dear Maintainer,


certbot reports the following error:

┌
│ (certbot)root@yadayada:~# certbot --help
│ An unexpected error occurred:
│ AttributeError: module 'certbot.plugins.common' has no attribute
'TLSSNI01'
│ Please see the logfile '/tmp/tmpbsljfl0i/log' for more details.
│ (certbot)root@yadayada:~# cat /tmp/tmpbsljfl0i/log
│ 2020-03-22 09:20:47,809:DEBUG:certbot._internal.log:Exiting abnormally:
│ Traceback (most recent call last):
│   File "/usr/bin/certbot", line 11, in 
│ load_entry_point('certbot==1.1.0', 'console_scripts', 'certbot')()
│   File "/usr/lib/python3/dist-packages/certbot/main.py", line 15, in main
│ return internal_main.main(cli_args)
│   File "/usr/lib/python3/dist-packages/certbot/_internal/main.py",
line 1317, in main
│ plugins = plugins_disco.PluginsRegistry.find_all()
│   File
"/usr/lib/python3/dist-packages/certbot/_internal/plugins/disco.py",
line 206, in find_all
│ plugin_ep = PluginEntryPoint(entry_point)
│   File
"/usr/lib/python3/dist-packages/certbot/_internal/plugins/disco.py",
line 48, in __init__
│ self.plugin_cls = entry_point.load()
│   File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py",
line 2411, in load
│ return self.resolve()
│   File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py",
line 2417, in resolve
│ module = __import__(self.module_name, fromlist=['__name__'], level=0)
│   File "/usr/lib/python3/dist-packages/certbot_apache/entrypoint.py",
line 4, in 
│ from certbot_apache import configurator
│   File
"/usr/lib/python3/dist-packages/certbot_apache/configurator.py", line
32, in 
│ from certbot_apache import http_01
│   File "/usr/lib/python3/dist-packages/certbot_apache/http_01.py",
line 13, in 
│ class ApacheHttp01(common.TLSSNI01):
│   File "/usr/lib/python3/dist-packages/certbot/plugins/common.py",
line 444, in __getattr__
│ return getattr(self._module, attr)
│ AttributeError: module 'certbot.plugins.common' has no attribute
'TLSSNI01'
│ 2020-03-22 09:20:47,809:ERROR:certbot._internal.log:An unexpected
error occurred:
└

You can notice that module python3-certbot-apache is also installed, but
with a lower version number.

I could fix the issue by upgrading python3-certbot-apache to version
1.1.0-1.


Thank you for your work on packaging this tool!



-- System Information:
Debian Release: 10.3
  APT prefers stable
  APT policy: (990, 'stable'), (380, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-8-amd64 (SMP w/4 CPU cores)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: unable to detect

Versions of packages certbot depends on:
ii  python3  3.7.3-1
ii  python3-certbot  1.1.0-1

certbot recommends no packages.

Versions of packages certbot suggests:
pn  python-certbot-doc  
ii  python3-certbot-apache  0.31.0-1
pn  python3-certbot-nginx   

-- no debconf information

Bug#896684: fontconfig-config: Fontconfig error: Cannot load config file from /etc/fonts/fonts.conf, due to many errors

[Damien Couroussé]

Package: fontconfig-config
Version: 2.13.0-4
Followup-For: Bug #896684


I experience the same problem, with a similar setup -- albeit minor differences.
The problem appears for a lot of applications run from the terminal, e.g. gitk.

Following https://bbs.archlinux.org/viewtopic.php?id=235643, I suspect that
there is a dependency mismatch in fontconfig packages:

$ LANG=C dpkg -l '*fontconfig*'
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ NameVersion  Architecture Description
+++-===---
ii  fontconfig  2.11.0-6.7+b1amd64generic font 
configuration library - support binarie
ii  fontconfig-config   2.13.0-4 all  generic font 
configuration library - configuration
un  libfontconfig (no description 
available)
un  libfontconfig-dev (no description 
available)
ii  libfontconfig1:amd642.12.6-0.1   amd64generic font 
configuration library - runtime
ii  libfontconfig1:i386 2.12.6-0.1   i386 generic font 
configuration library - runtime
ii  libfontconfig1-dev:amd6 2.12.6-0.1   amd64generic font 
configuration library - development


regards,
Damien

-- System Information:
Debian Release: 9.4
  APT prefers stable
  APT policy: (900, 'stable'), (500, 'stable-updates'), (300, 'testing'), (100, 
'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.9.0-6-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8), 
LANGUAGE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages fontconfig-config depends on:
ii  debconf [debconf-2.0]  1.5.61
ii  fonts-dejavu-core  2.37-1
ii  fonts-liberation   1:1.07.4-2
ii  ttf-bitstream-vera 1.10-8
ii  ucf3.0036

fontconfig-config recommends no packages.

fontconfig-config suggests no packages.

-- debconf information:
  fontconfig/hinting_type: Native
  fontconfig/hinting_style: hintslight
  fontconfig/subpixel_rendering: Automatic
  fontconfig/enable_bitmaps: false

Bug#810749: grive: Crash at first synchronisation: runtime exception

[Damien Couroussé]

Package: grive
Version: 0.2.0-1.1+b2
Severity: normal

hello,

the first synchronisation crashes as follows:

$ grive -a
---
Please go to this URL and get an authentication code:

[hidden]

---
Please input the authentication code here:
[hidden]
Reading local directories
Synchronizing folders
exception: /build/grive-7dwD69/grive-0.2.0/libgrive/src/http/CurlAgent.cc(149):
Throw in function long int gr::http::CurlAgent::ExecCurl(const string&,
gr::http::Receivable*, const gr::http::Header&)
Dynamic exception type: N5boost16exception_detail10clone_implIN2gr4http5ErrorEEE
std::exception::what: std::exception
[PN2gr4expt6MsgTagE] =
[PN2gr4http11CurlCodeTagE] = 0
[PN2gr4http15HttpResponseTagE] = 400
[PN2gr4http6UrlTagE] =
https://docs.google.com/feeds/default/private/full/-/folder?max-results=50=true
[PN2gr4http9HeaderTagE] = Authorization: Bearer
GData-Version: 3.0




-- System Information:
Debian Release: 8.2
  APT prefers stable
  APT policy: (900, 'stable'), (500, 'stable-updates'), (480, 'testing'), (200, 
'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages grive depends on:
ii  libboost-filesystem1.55.0   1.55.0+dfsg-3
ii  libboost-program-options1.55.0  1.55.0+dfsg-3
ii  libboost-system1.55.0   1.55.0+dfsg-3
ii  libc6   2.19-18+deb8u1
ii  libcurl3-gnutls 7.38.0-4+deb8u2
ii  libexpat1   2.1.0-6+deb8u1
ii  libgcc1 1:4.9.2-10
ii  libgcrypt20 1.6.3-2
ii  libjson-c2  0.11-4
ii  libstdc++6  4.9.2-10

grive recommends no packages.

grive suggests no packages.

-- no debconf information

Bug#784693: exim4-config: Exim configuration error in line 852 of /var/lib/exim4/config.autogenerated.tmp

[Damien Couroussé]

Le 09/05/2015 14:43, Marc Haber a écrit :
 Please check the contents of your /etc/mailname file and fix it
 appropriately. I have made a note for the package to give a more
 meaningful error message on this case in the future.

You and Adam well spotted the problem.
I have wrongly assumed that comments starting with '#' could be used in
/etc/mailname.

Thanks,
Damien


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#784693: exim4-config: Exim configuration error in line 852 of /var/lib/exim4/config.autogenerated.tmp

[Damien Couroussé]

Package: exim4-config
Version: 4.84-8
Severity: important


hello,

The installation of exim4 fails as copied below.
Please also find attached the tmp file
/var/lib/exim4/config.autogenerated.tmp created during the installation
process.

regards,


root@puccini:~# LANG=C apt-get install exim4
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  bsd-mailx exim4-base exim4-config exim4-daemon-light
Suggested packages:
  eximon4 exim4-doc-html exim4-doc-info spf-tools-perl swaks
Recommended packages:
  mailx
The following NEW packages will be installed:
  bsd-mailx exim4 exim4-base exim4-config exim4-daemon-light
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/2266 kB of archives.
After this operation, 6148 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Preconfiguring packages ...
Selecting previously unselected package exim4-config.
(Reading database ... 209734 files and directories currently installed.)
Preparing to unpack .../exim4-config_4.84-8_all.deb ...
Unpacking exim4-config (4.84-8) ...
Selecting previously unselected package exim4-base.
Preparing to unpack .../exim4-base_4.84-8_amd64.deb ...
Unpacking exim4-base (4.84-8) ...
Selecting previously unselected package exim4-daemon-light.
Preparing to unpack .../exim4-daemon-light_4.84-8_amd64.deb ...
Unpacking exim4-daemon-light (4.84-8) ...
Selecting previously unselected package bsd-mailx.
Preparing to unpack .../bsd-mailx_8.1.2-0.20141216cvs-2_amd64.deb ...
Unpacking bsd-mailx (8.1.2-0.20141216cvs-2) ...
Selecting previously unselected package exim4.
Preparing to unpack .../archives/exim4_4.84-8_all.deb ...
Unpacking exim4 (4.84-8) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for systemd (215-17) ...
Setting up exim4-config (4.84-8) ...
2015-05-07 22:03:43 Exim configuration error in line 852 of
/var/lib/exim4/config.autogenerated.tmp:
  unknown rewrite flag character '' (could be missing quotes round
replacement item)
2015-05-07 22:03:43 Exim configuration error in line 852 of
/var/lib/exim4/config.autogenerated.tmp:
  unknown rewrite flag character '' (could be missing quotes round
replacement item)
2015-05-07 22:03:43 Exim configuration error in line 852 of
/var/lib/exim4/config.autogenerated.tmp:
  unknown rewrite flag character '' (could be missing quotes round
replacement item)
exim: could not open panic log - aborting: see message(s) above
Invalid new configfile /var/lib/exim4/config.autogenerated.tmp, not
installing
/var/lib/exim4/config.autogenerated.tmp to
/var/lib/exim4/config.autogenerated
dpkg: error processing package exim4-config (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of exim4-base:
 exim4-base depends on exim4-config (= 4.82) | exim4-config-2; however:
  Package exim4-config is not configured yet.
  Package exim4-config-2 is not installed.
  Package exim4-config which provides exim4-config-2 is not configured yet.

dpkg: error processing package exim4-base (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of exim4-daemon-light:
 exim4-daemon-light depends on exim4-base (= 4.84); however:
  Package exim4-base is not configured yet.

dpkg: error processing package exim4-daemon-light (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of bsd-mailx:
 bsd-mailx depends on default-mta | mail-transport-agent; however:
  Package default-mta is not installed.
  Package exim4-daemon-light which provides default-mta is not
configured yet.
  Package mail-transport-agent is not installed.
  Package exim4-daemon-light which provides mail-transport-agent is not
configured yet.

dpkg: error processing package bsd-mailx (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of exim4:
 exim4 depends on exim4-base (= 4.84-8); however:
  Package exim4-base is not configured yet.
 exim4 depends on exim4-base ( 4.84-8.1); however:
  Package exim4-base is not configured yet.
 exim4 depends on exim4-daemon-light | exim4-daemon-heavy |
exim4-daemon-custom; however:
  Package exim4-daemon-light is not configured yet.
  Package exim4-daemon-heavy is not installed.
  Package exim4-daemon-custom is not installed.

dpkg: error processing package exim4 (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 exim4-config
 exim4-base
 exim4-daemon-light
 bsd-mailx
 exim4
E: Sub-process /usr/bin/dpkg returned an error code (1)



-- Package-specific info:
Exim version 4.84 #3 built 17-Feb-2015 17:45:49
Copyright (c) University of Cambridge, 1995 - 2014
(c) The Exim Maintainers and contributors in ACKNOWLEDGMENTS file, 2007
- 2014
Berkeley DB: Berkeley DB 5.3.28: (September  9, 2013)
Support for: 

Bug#763048: obnam: please check the config file specified; meaningless message provided

[Damien Couroussé]

Package: obnam
Version: 1.8-1
Severity: minor

hello,


obnam returns an abstruse message when the configuration file is
incorrectly specified.

Here is an example :
$ /usr/bin/obnam --config $BAD_CONFIG_FILENAME generations
ERROR: RA920EX:  does not seem to be an Obnam repository


best regards,
Damien

-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'stable-updates'), (480, 'stable'), (200, 
'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages obnam depends on:
ii  libc6 2.18-5
ii  python2.7.5-5
ii  python-cliapp 1.20140315-1
ii  python-fuse   2:0.2.1-9
ii  python-larch  1.20131130-1
ii  python-paramiko   1.10.1-1
ii  python-tracing0.8-1
ii  python-ttystatus  0.23-1

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#763057: git-annex: internal server error when creating a new repo with assistant

[Damien Couroussé]

Package: git-annex
Version: 5.20140926
Severity: important

Hello,

This issue seems related to #762466, but I am not sure.

From a fresh install of git-annex,
when creating a new repository I get the following error:


Internal Server Error

user error (git 
[--git-dir=/home/damien/docannex/.git,--work-tree=/home/damien/docannex,commit-tree,4b825dc642cb6eb9a060e54bf8d69288fbee4904,--no-gpg-sign]
 exited 128)



Steps to reproduce:
+ install git-annex
+ start webapp
+ create a new repo

regards,
Damien



-- System Information:
Debian Release: 7.3
  APT prefers testing
  APT policy: (900, 'testing'), (450, 'stable'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.14-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages git-annex depends on:
ii  curl7.26.0-1+wheezy10
ii  git 1:1.8.5.3-1
ii  libc6   2.19-7
ii  libffi6 3.0.13-12
ii  libgmp102:6.0.0+dfsg-4
ii  libgnutls26 2.12.23-10+b1
ii  libgsasl7   1.8.0-4
ii  libicu5252.1-4
ii  libidn111.25-2
ii  libxml2 2.9.1+dfsg1-4
ii  libyaml-0-2 0.1.4-3.2
ii  openssh-client  1:6.0p1-4+deb7u1
ii  rsync   3.0.9-4
ii  wget1.15-1+b1
ii  zlib1g  1:1.2.8.dfsg-1

Versions of packages git-annex recommends:
ii  bind9-host 1:9.8.4.dfsg.P1-6+nmu2+deb7u2
ii  git-remote-gcrypt  0.20130908-7
ii  gnupg  1.4.12-7+deb7u6
ii  lsof   4.86+dfsg-1
ii  nocache0.9-2
ii  quvi   0.4.2-2

Versions of packages git-annex suggests:
pn  bup  none
ii  graphviz 2.26.3-14+deb7u1
ii  libnss-mdns  0.10-3.2
pn  tahoe-lafs   none

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#763057: git-annex: internal server error when creating a new repo with assistant

[Damien Couroussé]

In the tab View logs, I get this:

Internal Server Error
internal liftAnnex



Damien


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#522722: Debian bug #522722

[Damien Couroussé]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Le 13/05/2014 15:37, Jörg Frings-Fürst a écrit :
 Control: tag -1 + moreinfo


 Hello,

 exist this error still in the current version?
hello,
Not on my side.

regards,
Damien
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG with Icedove - http://www.enigmail.net/

iQEcBAEBAgAGBQJTc9DpAAoJEI65qaVdiWDKDRoH/j3UDwUHGTx4b9I3AUf5xzBe
KXohF2HmbxKypn7uZH5KzH5ESFzvc0e7x4br5bUDCSvaGSRzGxr245KAtBK/UC77
cuD9L1ZU6R2tJexX7Ynu/O8tokbGTwsopKfnIBQ2vi0oGX5q5uK3OOMTX8tUtFfb
egQi4Ujjzal+apQDt8Cw/t8X0LXowYPd0fbuDW+jnSnAiXE1+qyDOfn0rfdLMfNm
zU69hrOuLBdNYQ2IOd5z6zIQtiQxFJeXOaCO+fQ8IxHRDZAMy/jdGkOUvEZv4lCa
tqYKyDLkw441Ji1APhXtq2ifeeDvQNdQXMkWU8QskHv0rWxGI+xHlTYT1YEy5+o=
=47EA
-END PGP SIGNATURE-


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#678884: (no subject)

[Damien Couroussé]

hello,

I agree that when the user interrupts the backup with ctrl-c, obnam
should terminate cleanly; I mean, without leaving locks.

However, checkpointing takes a lot of time on slow systems and/or with
low network bandwidth (several minutes).
I would prefer just interrupting the backup and removing locks before
leaving.
To minimise the amount of data lost in the case of interrupted backup,
it is possible to configure the checkpoints to be done more often.

regards,
Damien


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#713981: sd: missing dependency: libnet-trac-perl

[Damien Couroussé]

Package: sd
Version: 0.75-1
Severity: normal

hello,

The package libnet-trac-perl was not installed when I installed sd.
I suggest either mark this package as recommended, I produce an explicit
error message when the user tries to clone a trac repo, or add this
package as a dependency of the sd package.

regards,
Damien


-- System Information:
Debian Release: 7.0
  APT prefers stable
  APT policy: (990, 'stable'), (300, 'testing'), (100, 'unstable'), (10, 
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages sd depends on:
ii  libdatetime-format-natural-perl  1.00-1
ii  libdatetime-perl 2:0.7500-1
ii  libemail-mime-perl   1.910-1
ii  libhtml-tree-perl5.02-1
ii  libpath-class-perl   0.26-1
ii  libprophet-perl  0.750-1
ii  libtime-progress-perl1.7-1
ii  libtry-tiny-perl 0.11-1
ii  liburi-perl  1.60-1
ii  perl 5.14.2-16

sd recommends no packages.

sd suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#679056: alsa-base: Same here

[Damien Couroussé]

Package: alsa-base
Version: 1.0.25+2+nmu2
Followup-For: Bug #679056


Hello,

I experienced the same problem on a fresh install, with a ALC887-VD
sound system. The modification of alsa-base.conf proposed by Shawn works
for me.

Before solving the problem, /var/log/syslog was showing:

Apr  8 15:56:33 grigny kernel: [   34.936315] hda_codec: num_steps = 0
for NID=0xc (ctl = Front Playback Volume)
Apr  8 15:56:33 grigny pulseaudio[3886]: [pulseaudio] alsa-util.c:
Unable to load mixer: Argument invalide

More info about my hardware:
# lspci -v -s 00:1b.0
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller (rev 01)
Subsystem: Giga-byte Technology Device a002
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel


$ aplay -L
default
Playback/recording through the PulseAudio sound server
sysdefault:CARD=Intel
HDA Intel, ALC887-VD Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC887-VD Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC887-VD Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC887-VD Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC887-VD Analog 
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC887-VD Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC887-VD Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=3
HDA NVidia, HDMI 0
HDMI Audio Output



regards,
Damien


-- Package-specific info:
--- Begin additional package status ---
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ NameVersionArchitecture   Description
+++-===-==-==-===
ii  libasound2:amd641.0.25-4   amd64  shared library for ALSA 
applications
--- End additional package status ---
--- Begin /proc/asound/version ---
Advanced Linux Sound Architecture Driver Version 1.0.24.
--- End /proc/asound/version ---
--- Begin /proc/asound/cards ---
 0 [Intel  ]: HDA-Intel - HDA Intel
  HDA Intel at 0xfdff8000 irq 43
 1 [NVidia ]: HDA-Intel - HDA NVidia
  HDA NVidia at 0xfcffc000 irq 16
--- End /proc/asound/cards ---
--- Begin /dev/snd/ listing ---
total 0
drwxr-xr-x  2 root root   80 Apr  8 16:48 by-path
crw-rw---T+ 1 root audio 116,  6 Apr  8 16:48 controlC0
crw-rw---T+ 1 root audio 116, 15 Apr  8 16:48 controlC1
crw-rw---T+ 1 root audio 116,  5 Apr  8 16:48 hwC0D2
crw-rw---T+ 1 root audio 116, 14 Apr  8 16:48 hwC1D0
crw-rw---T+ 1 root audio 116, 13 Apr  8 16:48 hwC1D1
crw-rw---T+ 1 root audio 116, 12 Apr  8 16:48 hwC1D2
crw-rw---T+ 1 root audio 116, 11 Apr  8 16:48 hwC1D3
crw-rw---T+ 1 root audio 116,  4 Apr  8 16:49 pcmC0D0c
crw-rw---T+ 1 root audio 116,  3 Apr  8 17:02 pcmC0D0p
crw-rw---T+ 1 root audio 116,  2 Apr  8 16:48 pcmC0D2c
crw-rw---T+ 1 root audio 116, 10 Apr  8 16:49 pcmC1D3p
crw-rw---T+ 1 root audio 116,  9 Apr  8 16:49 pcmC1D7p
crw-rw---T+ 1 root audio 116,  8 Apr  8 16:49 pcmC1D8p
crw-rw---T+ 1 root audio 116,  7 Apr  8 16:49 pcmC1D9p
crw-rw---T+ 1 root audio 116,  1 Apr  8 16:48 seq
crw-rw---T+ 1 root audio 116, 33 Apr  8 16:48 timer
--- End /dev/snd/ listing ---

-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (900, 'testing'), (400, 'stable-updates'), (400, 'stable'), (100, 
'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages alsa-base depends on:
ii  kmod9-2
ii  procps  1:3.3.3-2
ii  udev175-7.1

Versions of packages alsa-base recommends:
ii  alsa-utils  1.0.25-4

Versions of packages alsa-base suggests:
pn  alsa-ossnone
pn  oss-compat  none

Versions of packages libasound2 depends on:
ii  libc6  2.13-38
ii  

Bug#697369: ImportError: No module named duplicity

[Damien Couroussé]

Package: deja-dup
Version: 20.2-2.1
Severity: important


Hello,

After an upgrade to the version currently in testing, deja-dup crashes
at startup. duplicity is installed with the required version.

$ deja-dup
Traceback (most recent call last):
  File /usr/bin/duplicity, line 40, in module
from duplicity import log
ImportError: No module named duplicity


regards,
Damien

-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (700, 'testing'), (500, 'stable-updates'), (490, 'stable'), (400, 
'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages deja-dup depends on:
ii  dconf-gsettings-backend [gsettings-backend]  0.12.1-3
ii  duplicity0.6.18-3
ii  libatk1.0-0  2.4.0-2
ii  libc62.13-37
ii  libcairo-gobject21.12.2-2
ii  libcairo21.12.2-2
ii  libgdk-pixbuf2.0-0   2.26.1-1
ii  libglib2.0-0 2.33.12+really2.32.4-3
ii  libgnome-keyring03.4.1-1
ii  libgtk-3-0   3.4.2-4
ii  libnautilus-extension1a  3.4.2-1+build1
ii  libnotify4   0.7.5-1
ii  libpango1.0-01.30.0-1

Versions of packages deja-dup recommends:
ii  openssh-client [ssh-client]  1:6.0p1-3
ii  python-boto  2.3.0-1
pn  python-rackspace-cloudfiles  none

deja-dup suggests no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#697369: Acknowledgement (ImportError: No module named duplicity)

[Damien Couroussé]

Hello,

Actually, deja-dup could not launch because python2.6 was still installed
on my system and set as the default version of python.
Removing python2.6 or setting python2.7 as default (update-alternatives)
now allows to run correctly deja-dup.

Maybe it should be made explicit that deja-dup runs python = 2.7 ?

regards,
Damien

Bug#696318: zim crash at startup (ValueError: No such object: RemoteObject: zim.gui.GtkInterface)

[Damien Couroussé]

Package: zim
Version: 0.58-1
Severity: important


Hello,

zim crashes at startup. I suspect a missing dependency of this release
version to python-gobject-2, or to a more recent version of
python-gobject which comes with python-gobject-2. I have also found this bug in 
the previous
release 0.57.

Here is the trace :


$ zim

** (process:13882): WARNING **: Trying to register gtype 'GMountMountFlags' as 
enum when in fact it is of type 'GFlags'

** (process:13882): WARNING **: Trying to register gtype 'GDriveStartFlags' as 
enum when in fact it is of type 'GFlags'

** (process:13882): WARNING **: Trying to register gtype 'GSocketMsgFlags' as 
enum when in fact it is of type 'GFlags'

** (process:13884): WARNING **: Trying to register gtype 'GMountMountFlags' as 
enum when in fact it is of type 'GFlags'

** (process:13884): WARNING **: Trying to register gtype 'GDriveStartFlags' as 
enum when in fact it is of type 'GFlags'

** (process:13884): WARNING **: Trying to register gtype 'GSocketMsgFlags' as 
enum when in fact it is of type 'GFlags'
Traceback (most recent call last):
  File /usr/bin/zim, line 73, in module
zim.main(argv)
  File /usr/lib/python2.6/dist-packages/zim/__init__.py, line 446, in main
gui.present(page, **optsdict)
  File /usr/lib/python2.6/dist-packages/zim/ipc.py, line 708, in call
raise re
ValueError: No such object: RemoteObject: 
zim.gui.GtkInterface(file:///home/damien/Notebooks/Notes)


I am on a stable-based installation with python2.6. The same problem
appears with python2.7. The problem does not appear in a chroot, where a
new version of python-gobject is installed (v3:2.2-1). With this new version 
comes python-gobect-2, which is not present on my original setup.

$ reportbug --template zim
(...)
Package: zim
Version: 0.58-1

Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages zim depends on:
ii  python  2.7.3~rc2-1
ii  python-gobject  3.2.2-1
ii  python-gtk2 2.24.0-3
ii  python-xdg  0.19-4

Versions of packages zim recommends:
ii  python-gtkspell  2.25.3-12

Versions of packages zim suggests:
pn  bzr   none
pn  ditaa none
ii  dvipng1.14-1+b1
pn  git   none
pn  gnuplot   none
pn  graphviz  none
pn  lilypond  none
pn  mercurial none
pn  python-zeitgeist  none
pn  r-basenone
pn  scrot none

(...)


regards,
Damien





-- System Information:
Debian Release: 6.0.6
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'unstable'), 
(200, 'testing'), (10, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages zim depends on:
ii  python2.6.7-3interactive high-level object-orie
ii  python-gobject2.21.4+is.2.21.3-1 Python bindings for the GObject li
ii  python-gtk2   2.17.0-4   Python bindings for the GTK+ widge
ii  python-xdg0.19-2 Python library to access freedeskt

Versions of packages zim recommends:
ii  python-gtkspell   2.25.3-7   Python bindings for the GtkSpell l

Versions of packages zim suggests:
ii  bzr  2.1.2-1 easy to use distributed version co
pn  ditaanone  (no description available)
pn  dvipng   none  (no description available)
ii  git  1:1.7.2.5-3 fast, scalable, distributed revisi
pn  gnuplot  none  (no description available)
ii  graphviz 2.26.3-5rich set of graph drawing tools
pn  lilypond none  (no description available)
ii  mercurial2.2.2-1 easy-to-use, scalable distributed
pn  python-zeitgeist none  (no description available)
pn  r-base   none  (no description available)
ii  scrot0.8-13  command line screen capture utilit

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#579709:

[Damien Couroussé]

Package: evince
Version: 2.32.0-1
Severity: normal


Hello,

I do also experience this bug.
But pdfcube also has the same displaying problems for me. xpdf handles
correctly this document.

Furthermore, I have noticed that this problem happens in documents that
include no name fonts.
For example for this document :

pdffonts CoplanarPts.pdf
name type  emb sub uni object ID
 - --- --- --- -
[none]   Type 3yes no  no   4  0
Times-BoldItalic Type 1no  no  no 252  0
Times-Bold   Type 1no  no  no 248  0
Times-Roman  Type 1no  no  no 245  0
Times-Italic Type 1no  no  no 241  0
[none]   Type 3yes no  no 279  0
Symbol   Type 1no  no  no 459  0
[none]   Type 3yes no  no 489  0
Courier  Type 1no  no  no 662  0

I can reproduce the bug and the reported behaviour for pdfcube and xpdf with 
other similar documents, e.g. :
http://www.capricorn.org/~akira/home/lockpick/mitlg-a4.pdf
found here : 
http://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1037414.html

$ pdffonts mitlg-a4.pdf
name type  emb sub uni object ID
 - --- --- --- -
[none]   Type 3yes no  no   4  0
[none]   Type 3yes no  no 272  0


Hope it helps


thanks,
Damien

-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages evince depends on:
ii  evince-common  2.32.0-1  Document (PostScript, PDF) viewer
ii  gconf2 3.2.3-4   GNOME configuration database syste
ii  gnome-icon-theme   3.4.0-2   GNOME Desktop icon theme
ii  libatk1.0-02.2.0-2   ATK accessibility toolkit
ii  libc6  2.11.3-3  Embedded GNU C Library: Shared lib
ii  libcairo2  1.12.2-2  The Cairo 2D vector graphics libra
ii  libevince3 2.32.0-1  Document (PostScript, PDF) renderi
ii  libfontconfig1 2.9.0-7   generic font configuration library
ii  libfreetype6   2.4.2-2.1+squeeze4FreeType 2 font engine, shared lib
ii  libgail18  2.24.4-3  GNOME Accessibility Implementation
ii  libgconf2-43.2.3-4   GNOME configuration database syste
ii  libgdk-pixbuf2.0-0 2.24.1-1  GDK Pixbuf library
ii  libglib2.0-0   2.28.6-1  The GLib library of C routines
ii  libgnome-keyring0  2.30.1-1  GNOME keyring services library
ii  libgtk2.0-02.24.4-3  The GTK+ graphical user interface
ii  libice62:1.0.6-2 X11 Inter-Client Exchange library
ii  libnautilus-extens 2.30.1-2squeeze1  libraries for nautilus components
ii  libpango1.0-0  1.29.4-3+b1   Layout and rendering of internatio
ii  libsm6 2:1.1.1-1 X11 Session Management library
ii  libx11-6   2:1.3.3-4 X11 client-side library
ii  libxml22.7.8.dfsg-2+squeeze5 GNOME XML library
ii  shared-mime-info   0.71-4FreeDesktop.org shared MIME databa
ii  zlib1g 1:1.2.3.4.dfsg-3  compression library - runtime

Versions of packages evince recommends:
ii  dbus-x11   1.2.24-4+squeeze1 simple interprocess messaging syst
ii  gvfs   1.6.4-3   userspace virtual filesystem - ser

Versions of packages evince suggests:
ii  nautilus2.30.1-2squeeze1 file manager and graphical shell f
ii  poppler-data0.4.3-1  Encoding data for the poppler PDF
pn  unrar   none   (no description available)

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675373: virtualbox: bug also experienced in this release version

[Damien Couroussé]

Package: virtualbox
Version: 4.1.18-dfsg-1
Severity: normal


Hello,

I do also experience this bug in this version of the package.
I get the same gdb trace as manuk7 reports.




-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages virtualbox depends on:
ii  adduser3.112+nmu2add and remove users and groups
ii  dpkg   1.15.8.12 Debian package management system
ii  libc6  2.11.3-3  Embedded GNU C Library: Shared lib
ii  libcurl3   7.21.0-2.1+squeeze2   Multi-protocol file transfer libra
ii  libgcc11:4.4.5-8 GCC support library
ii  libgsoap2  2.8.7-1   Runtime libraries for gSOAP
ii  libpng12-0 1.2.44-1+squeeze4 PNG library - runtime
ii  libpython2.7   2.7.2-8   Shared Python runtime library (ver
ii  libsdl1.2debian1.2.14-6.1Simple DirectMedia Layer
ii  libssl1.0.01.0.0h-1  SSL shared libraries
ii  libstdc++6 4.6.2-12  GNU Standard C++ Library v3
ii  libvncserver0  0.9.9+dfsg-1  API to write one's own vnc server
ii  libx11-6   2:1.3.3-4 X11 client-side library
ii  libxcursor11:1.1.13-1X cursor management library
ii  libxext6   2:1.3.1-2 X11 miscellaneous extension librar
ii  libxml22.7.8.dfsg-2+squeeze4 GNOME XML library
ii  libxmu62:1.0.5-2 X11 miscellaneous utility library
ii  libxt6 1:1.0.7-1 X11 toolkit intrinsics library
ii  python 2.6.7-3   interactive high-level object-orie
ii  python2.7  2.7.2-8   An interactive high-level object-o
ii  zlib1g 1:1.2.3.4.dfsg-3  compression library - runtime

Versions of packages virtualbox recommends:
ii  libgl1-mesa-glx [libgl1]   7.7.1-5   A free implementation of the OpenG
ii  libqt4-opengl  4:4.8.1-1 Qt 4 OpenGL module
ii  libqtcore4 4:4.8.1-1 Qt 4 core module
ii  libqtgui4  4:4.8.1-1 Qt 4 GUI module
ii  virtualbox-dkms4.1.18-dfsg-1 x86 virtualization solution - kern
ii  virtualbox-qt  4.1.18-dfsg-1 x86 virtualization solution - Qt b

Versions of packages virtualbox suggests:
ii  vde2  2.3.2-4Virtual Distributed Ethernet
pn  virtualbox-guest-additions-is none (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#636572:

[Damien Couroussé]

severity 636572 important
tag 636572 confirmed
thanks

I request a change of the severity at least to important : the package is
not usable for me.
If more info is required, please ask what kind.
regards,

Bug#675373: Info received (virtualbox: bug also experienced in this release version)

[Damien Couroussé]

severity important
thanks

I request a change of the severity at least to important: the package is
not usable for me.
I can provide more info, but don't know exactly what you are looking
for. Please ask.

regards,



2012/7/11 Debian Bug Tracking System ow...@bugs.debian.org

 Thank you for the additional information you have supplied regarding
 this Bug report.

 This is an automatically generated reply to let you know your message
 has been received.

 Your message is being forwarded to the package maintainers and other
 interested parties for their attention; they will reply in due course.

 Your message has been sent to the package maintainer(s):
  Debian Virtualbox Team pkg-virtualbox-de...@lists.alioth.debian.org

 If you wish to submit further information on this problem, please
 send it to 675...@bugs.debian.org.

 Please do not send mail to ow...@bugs.debian.org unless you wish
 to report a problem with the Bug-tracking system.

 --
 675373: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675373
 Debian Bug Tracking System
 Contact ow...@bugs.debian.org with problems

Bug#680946: okular: fails to start, symbol lookup error

[Damien Couroussé]

Package: okular
Version: 4:4.4.5-2
Severity: important


Hello,

I have just installed okular on a stable/testing mixed system. At least
one symbol is not defined and makes okular crash.
BTW, I am not running KDE. Hence I guess my system has the very minimum
kde libraries installed in order to run okular.

An example:

$ okular
okular: symbol lookup error: /usr/lib/kde4/okularpart.so: undefined symbol: 
_ZN6Okular8Settings20centerFirstPageInRowEv


best regards,
Damien



-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages okular depends on:
ii  kdebase-runtime 4:4.8.4-1Transitional package for the KDE r
ii  libc6   2.11.3-3 Embedded GNU C Library: Shared lib
ii  libfreetype62.4.2-2.1+squeeze4   FreeType 2 font engine, shared lib
ii  libjpeg62   6b1-1The Independent JPEG Group's JPEG
ii  libkdecore5 4:4.8.4-3KDE Platform Core Library
ii  libkdeui5   4:4.8.4-3KDE Platform User Interface Librar
ii  libkio5 4:4.8.4-3Network-enabled File Management Li
ii  libkparts4  4:4.8.4-3Framework for the KDE Platform Gra
ii  libkpty44:4.8.4-3Pseudo Terminal Library for the KD
ii  libkutils4  4:4.8.4-3dummy transitional library
ii  libokularcore1  4:4.6.5-3libraries for the Okular document
ii  libphonon4  4:4.6.0.0-2  multimedia framework from KDE - co
ii  libpoppler-qt4-30.18.4-2 PDF rendering library (Qt 4 based
ii  libqca2 2.0.2-1  libraries for the Qt Cryptographic
ii  libqimageblitz4 1:0.0.4-4QImageBlitz image effects library
ii  libqt4-dbus 4:4.8.1-1Qt 4 D-Bus module
ii  libqt4-svg  4:4.8.1-1Qt 4 SVG module
ii  libqt4-xml  4:4.8.1-1Qt 4 XML module
ii  libqtcore4  4:4.8.1-1Qt 4 core module
ii  libqtgui4   4:4.8.1-1Qt 4 GUI module
ii  libspectre1 0.2.6-1  Library for rendering PostScript d
ii  libstdc++6  4.6.2-12 GNU Standard C++ Library v3
ii  phonon  4:4.6.0really4.4.2-1 metapackage for the Phonon multime
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

okular recommends no packages.

Versions of packages okular suggests:
ii  ghostscript 8.71~dfsg2-9 The GPL Ghostscript PostScript/PDF
pn  kttsd   none   (no description available)
pn  okular-extra-backends   none   (no description available)
ii  poppler-data0.4.3-1  Encoding data for the poppler PDF
ii  texlive-binaries2009-8   Binaries for TeX Live
pn  unrar   none   (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#680946: okular: fails to start, symbol lookup error

[Damien Couroussé]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hello,

On 09/07/2012 15:49, Pino Toscano wrote:
 Alle lunedì 9 luglio 2012, Damien Couroussé ha scritto:
 Package: okular Version: 4:4.4.5-2
 
 Why didn't you upgrade okular too? Also,
The buguous scenario was the following :

I just installed okular, and experienced this bug. I guess (almost) no
kde-related packages were already installed on this machine.


 
 ii  libokularcore1  4:4.6.5-3libraries for the
 Okular
 document
 
 why this old version (not stable, and not testing either)?
I am using a mixed setup. I can provide the preferences settings if
you wish/need.

 
 Ok, the dependencies should be enough (and will be fixed so
 frankenstein like yours won't happen anymore), but why not upgrade
 all the okular packages together, and not keep them up-to-date with
 testing?
 
Please stay polite.
Yes, my setup is not updated every day ; I run an update every one or
two months.
However, even with an out-of-date setup, I guess I should not
experience this bug. Should I ?

D.


-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJP+yAhAAoJEI65qaVdiWDKtykH+wRCqCpsAfr7cZmJU1DG/H+x
UrFIZYh+hnAdZ9bDRuSBxKtpNfaRLikM99iMVTtidNvb563lrxwqFv9ibAzLfPW8
fhTNvLt4edmyyzDjGCeGE1V1lDlK+0v9FXtEfS/EPcaVw/Dm9h2Gf64HhAgaNkGu
x/qryyjq//lQD6BgBKbJXCwT59u4JSxnlnbQIkuhdITRJxlxxPfM2bKR4o2r2lu5
ECgEbyiFSocGbz1YqRWvIO2mS6jReUNKtuzZdygQqVWdDLryHSYfkogNSJE7YPBf
IGZH2mWXHC1Bsm8FiBaWb/6RURr5sh3blTBMk476I9LRjp4bx58SwHjKsDMb5T0=
=OBUY
-END PGP SIGNATURE-



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#678622: obnam: Please add a [FILE] parameter to the 'ls' command

[Damien Couroussé]

patch
thanks


This small patch adds an optional option [FILE] to the ls command.
It does not modify the way the ls command is already working: it should
still be possible to give None, one or several generation arguments.

ls command summary would become:
obnam [options] ls [GENERATION]... [FILE]

regards,
Damien

--- /tmp/bzr-diff-7g90EY/old/obnamlib/plugins/show_plugin.py	2012-05-24 17:27:45.0 +0200
+++ /home/damien/src/read_only/obnam/obnamlib/plugins/show_plugin.py	2012-06-28 22:02:38.0 +0200
@@ -129,15 +129,28 @@
 def ls(self, args):
 '''List contents of a generation.'''
 self.open_repository()
+
+if self.__is_generation(args[-1]):
+show_file = '/'
+else:
+# a trailing slash makes the ls command fail...
+show_file = args.pop().rstrip('/')
+
 for gen in args or [self.app.settings['generation']] or [latest]:
 gen = self.repo.genspec(gen)
 started, ended = self.repo.client.get_generation_times(gen)
 started = self.format_time(started)
 ended = self.format_time(ended)
 print 'Generation %s (%s - %s)' % (gen, started, ended)
-self.show_objects(gen, '/')
+self.show_objects(gen, show_file)
 self.repo.fs.close()

+def __is_generation(self, gen):
+try:
+int(gen)
+return True
+except ValueError:
+return False
+
 def format_time(self, timestamp):
 return time.strftime('%Y-%m-%d %H:%M:%S', time.localtime(timestamp))

Bug#678622: obnam: Please add a [FILE] parameter to the 'ls' command

[Damien Couroussé]

Package: obnam
Version: 1.0-1
Severity: wishlist

Dear Maintainer,

First of all, thanks for this nice tool!

Is it possible to add a [FILE] parameter to the 'ls' command, in
order to list a partial view of a generation ? For example by doing :
$ obnam ls generation backup

By example :
$ obnam ls 6008 /home/damien/Desktop
while the whole /home/damien directory is backuped.

There are workarounds for this, for example by filtering the output of
the ls command using a grep.


regards,
Damien


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (450, 'stable-updates'), (450, 'stable'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages obnam depends on:
ii  libc6 2.13-33
ii  python2.7.2-10
ii  python-cliapp 0.29-1
ii  python-larch  1.20120527-1
ii  python-paramiko   1.7.7.1-2
ii  python-tracing0.6-2
ii  python-ttystatus  0.18-1
ii  python2.6 2.6.7-4
ii  python2.7 2.7.3~rc2-2.1

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#678628: obnam: manpage : example for keeping policies

[Damien Couroussé]

Package: obnam
Version: 1.0-1
Severity: minor
Tags: patch

Dear Lars,

Please find attached a patch for a small try to make the manpage about
the keeping policy more clear.

Hope it helps,
Damien

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (450, 'stable-updates'), (450, 'stable'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages obnam depends on:
ii  libc6 2.13-33
ii  python2.7.2-10
ii  python-cliapp 0.29-1
ii  python-larch  1.20120527-1
ii  python-paramiko   1.7.7.1-2
ii  python-tracing0.6-2
ii  python-ttystatus  0.18-1
ii  python2.6 2.6.7-4
ii  python2.7 2.7.3~rc2-2.1

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information
=== modified file 'obnam.1.in'
--- obnam.1.in	2012-04-29 19:12:21 +
+++ obnam.1.in	2012-06-23 10:15:59 +
@@ -336,7 +336,14 @@
 .PP
 A typical policy might be
 .IR 72h,7d,5w,12m ,
-to keep hourly backups for three days,
+which means: keep
+the last 72 hourly backups,
+the last 7 daily backups,
+the last 5 weekly backups and
+the last 12 monthly backups.
+If the backups are systematically run on an hourly basis,
+this will mean keeping
+hourly backups for three days,
 daily backups for a week,
 weekly backups for a month,
 and monthly backups for a year.

Bug#675373: virtualbox: extra information

[Damien Couroussé]

Package: virtualbox
Version: 4.1.16-dfsg-1
Severity: normal

Dear Maintainer,

I admit my first bug report was lacking of information. Please apologize
for this.

I first installed the -dbg package (in version 4.1.16-dfsg-1) and started 
virtualbox using gdb:

Here is a copy of the gdb session:

$ gdb /usr/lib/virtualbox/VirtualBox
GNU gdb (GDB) 7.0.1-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type show copying
and show warranty for details.
This GDB was configured as x86_64-linux-gnu.
For bug reporting instructions, please see:
http://www.gnu.org/software/gdb/bugs/...
Reading symbols from /usr/lib/virtualbox/VirtualBox...Reading symbols from 
/usr/lib/debug/usr/lib/virtualbox/VirtualBox...done.
(no debugging symbols found)...done.
(gdb) r
Starting program: /usr/lib/virtualbox/VirtualBox
[Thread debugging using libthread_db enabled]
VirtualBox: Error -10 in SUPR3HardenedMain!
VirtualBox: Effective UID is not root (euid=1000 egid=1000 uid=1000 gid=1000)

VirtualBox: Tip! It may help to reinstall VirtualBox.

Program exited with code 01.
(gdb) Warning: program compiled against libxml 208 using older 207

$ ll /usr/lib/virtualbox/VirtualBox
-rwsr-sr-x 1 root root 27632 29 mai   10:30 /usr/lib/virtualbox/VirtualBox

$ dpkg -l virtual*
Souhait=inconnU/Installé/suppRimé/Purgé/H=à garder
| 
État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
||/ Nom   Version   Description
+++-=-=-==
ii  virtualbox4.1.16-dfsg-1 x86 
virtualization solution - base binaries
un  virtualbox-2.0néant  (aucune 
description n'est disponible)
un  virtualbox-2.1néant  (aucune 
description n'est disponible)
un  virtualbox-2.2néant  (aucune 
description n'est disponible)
un  virtualbox-3.0néant  (aucune 
description n'est disponible)
un  virtualbox-4.1néant  (aucune 
description n'est disponible)
ii  virtualbox-dbg4.1.16-dfsg-1 x86 
virtualization solution - debugging symbols
ii  virtualbox-dkms   4.1.16-dfsg-1 x86 
virtualization solution - kernel module sources for dkms
un  virtualbox-guest-additions-is néant  (aucune 
description n'est disponible)
un  virtualbox-guest-dkms néant  (aucune 
description n'est disponible)
un  virtualbox-guest-source   néant  (aucune 
description n'est disponible)
rc  virtualbox-guest-utils4.1.14-dfsg-1 x86 
virtualization solution - non-X11 guest utilities
un  virtualbox-guest-x11  néant  (aucune 
description n'est disponible)
un  virtualbox-osenéant  (aucune 
description n'est disponible)
un  virtualbox-ose-dbgnéant  (aucune 
description n'est disponible)
un  virtualbox-ose-dkms   néant  (aucune 
description n'est disponible)
un  virtualbox-ose-guest-dkms néant  (aucune 
description n'est disponible)
un  virtualbox-ose-guest-source   néant  (aucune 
description n'est disponible)
un  virtualbox-ose-guest-utilsnéant  (aucune 
description n'est disponible)
un  virtualbox-ose-qt néant  (aucune 
description n'est disponible)
un  virtualbox-ose-source néant  (aucune 
description n'est disponible)
ii  virtualbox-qt 4.1.16-dfsg-1 x86 
virtualization solution - Qt based user interface
un  virtualbox-source néant  (aucune 
description n'est disponible)


I first did this with version 4.1.14-dfsg-1 and got exactly the same
behavior.


I can bring more information I you wish; just kindly ask!


regards,
Damien





-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages virtualbox depends on:
ii  adduser3.112+nmu2add and remove users and groups
ii  libc6  2.11.3-3  

Bug#675818: UnboundLocalError: local variable 'new_node' referenced before assignment

[Damien Couroussé]

Package: python-larch
Version: 0.31-1
Severity: normal

Dear Maintainer,

I suspect a problem of indentation in fsck.py at line 107:

  
  File /usr/lib/python2.7/dist-packages/larch/fsck.py, line 107, in do
tracing.trace('fixed it: %s' % new_node.keys())
UnboundLocalError: local variable 'new_node' referenced before assignment
  

Adding one more indentation level would avoid this error, as the
variable new_node does not seem to be used elsewhere in this package.

regards,
Damien

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (450, 'stable-updates'), (450, 'stable'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages python-larch depends on:
ii  python  2.7.2-10
ii  python-cliapp   0.29-1
ii  python-tracing  0.6-2
ii  python2.6   2.6.7-4
ii  python2.7   2.7.3~rc2-2.1

Versions of packages python-larch recommends:
ii  python-ttystatus  0.18-1

Versions of packages python-larch suggests:
ii  libjs-jquery  1.7.1-1
ii  libjs-underscore  1.1.6-1

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675820: ERROR: Larch B-tree is in read-only mode, no changes allowed

[Damien Couroussé]

Package: obnam
Version: 1.0-1
Severity: normal

Hello,

obnam is not able to fsck-fix my backup repo. The error reported is:
ERROR: Larch B-tree is in read-only mode, no changes allowed
The fsck-errors were artificially created by aborting several times a backup.

This may be the normal behaviour, but it does not seem clear to me why this 
occurs.

The fsck command reports unused chunks, I rerun fsck in fix mode
immediately after and get this error:

$ obnam --lock-timeout=3 -r  /home/damien/tmp/disk fsck
chunk 17152530288956314516 not used by anyone
chunk 17152530288956314520 not used by anyone
(etc...)
$ obnam --lock-timeout=3 -r  /home/damien/tmp/disk fsck --fsck-fix
ERROR: Larch B-tree is in read-only mode, no changes allowed

 regards,
 Damien

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (450, 'stable-updates'), (450, 'stable'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages obnam depends on:
ii  libc6 2.13-32
ii  python2.7.2-10
ii  python-cliapp 0.29-1
ii  python-larch  0.31-1
ii  python-paramiko   1.7.7.1-2
ii  python-tracing0.6-2
ii  python-ttystatus  0.18-1
ii  python2.6 2.6.7-4
ii  python2.7 2.7.3~rc2-2.1

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675822: obnam: fsck does not release the lock when going into error

[Damien Couroussé]

Package: obnam
Version: 1.0-1
Severity: normal

Hello,

obnam does not release the repository lock when an error is raised.
From the error message I assume the error is correctly treated in obnam
(i.e. the error is correctly catched, and obnam does not crash
abruptly).

$ obnam --lock-timeout=3 -r  /home/damien/tmp/disk fsck --fsck-fix
ERROR: Larch B-tree is in read-only mode, no changes allowed
damien@marchand:~/tmp/disk$ obnam --lock-timeout=3 -r  /home/damien/tmp/disk 
fsck
ERROR: Lock timeout

== here there is no reason why the repo is still locked; I am the only
user accessing to this repo. After fsck has met the first error, I
assume it should release the repository lock.

best regards,
Damien




-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (450, 'stable-updates'), (450, 'stable'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages obnam depends on:
ii  libc6 2.13-32
ii  python2.7.2-10
ii  python-cliapp 0.29-1
ii  python-larch  0.31-1
ii  python-paramiko   1.7.7.1-2
ii  python-tracing0.6-2
ii  python-ttystatus  0.18-1
ii  python2.6 2.6.7-4
ii  python2.7 2.7.3~rc2-2.1

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675825: obnam: client not found, but cannot remove lock

[Damien Couroussé]

Package: obnam
Version: 1.0-1
Severity: normal

Hello,

During the initialization of the first backup, the creation of the
metadata on the repository side might take a few time; I assume that
this happens especially when gpg encryption is used.

If the backup is interrupted at this time, it is then no longer possible
to remove the lock on the repository.

Steps to reproduce the problem:
1. create a new backup
$ obnam --lock-timeout=3 -r sftp://damien@server/home/damien/ttt backup /data

2. abort the backup before it has started sending some backup data

3. restart the backup - you get a lock timeout

4. cannot force the lock:

$ obnam --lock-timeout=3 -r sftp://damien@server/home/damien/ttt backup /data
ERROR: Lock timeout


This problem is easy to solve by erasing the contents of the directory
that will receive the repository files on the server side.
I don't know if a fix is really necessary, maybe a simple warning in obnam 
documentation would be enough.

regards,
Damien

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (450, 'stable-updates'), (450, 'stable'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages obnam depends on:
ii  libc6 2.13-32
ii  python2.7.2-10
ii  python-cliapp 0.29-1
ii  python-larch  0.31-1
ii  python-paramiko   1.7.7.1-2
ii  python-tracing0.6-2
ii  python-ttystatus  0.18-1
ii  python2.6 2.6.7-4
ii  python2.7 2.7.3~rc2-2.1

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675373: virtualbox: segfault in libQtCore.so.4.8.1

[Damien Couroussé]

Package: virtualbox
Version: 4.1.14-dfsg-1
Severity: grave
Justification: renders package unusable



hello,

virtualbox segfaults. dmesg displays the following:
[33391.906793] VirtualBox[25243]: segfault at 0 ip 7fa49a5cf43a sp 
7fffc3ee1140 error 4 in libQtCore.so.4.8.1[7fa49a54e000+2cc000]

Indeed, libQTCore.so is found here in the version of libqtcore4
installed on my system :

$ dpkg -L libqtcore4
(...)
/usr/lib/x86_64-linux-gnu/libQtCore.so.4.8.1
(...)

regards,
Damien




-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages virtualbox depends on:
ii  adduser3.112+nmu2add and remove users and groups
ii  libc6  2.11.3-3  Embedded GNU C Library: Shared lib
ii  libcurl3   7.21.0-2.1+squeeze2   Multi-protocol file transfer libra
ii  libgcc11:4.4.5-8 GCC support library
ii  libgsoap2  2.8.7-1   Runtime libraries for gSOAP
ii  libpng12-0 1.2.44-1+squeeze4 PNG library - runtime
ii  libpython2.7   2.7.2-8   Shared Python runtime library (ver
ii  libsdl1.2debian1.2.14-6.1Simple DirectMedia Layer
ii  libssl1.0.01.0.0h-1  SSL shared libraries
ii  libstdc++6 4.6.2-12  GNU Standard C++ Library v3
ii  libvncserver0  0.9.7-2+b1API to write one's own vnc server
ii  libx11-6   2:1.3.3-4 X11 client-side library
ii  libxcursor11:1.1.13-1X cursor management library
ii  libxext6   2:1.3.1-2 X11 miscellaneous extension librar
ii  libxml22.7.8.dfsg-2+squeeze4 GNOME XML library
ii  libxmu62:1.0.5-2 X11 miscellaneous utility library
ii  libxt6 1:1.0.7-1 X11 toolkit intrinsics library
ii  python 2.6.7-3   interactive high-level object-orie
ii  python-central 0.6.16+nmu1   register and build utility for Pyt
ii  zlib1g 1:1.2.3.4.dfsg-3  compression library - runtime

Versions of packages virtualbox recommends:
ii  libgl1-mesa-glx [libgl1]   7.7.1-5   A free implementation of the OpenG
ii  libqt4-opengl  4:4.8.1-1 Qt 4 OpenGL module
ii  libqtcore4 4:4.8.1-1 Qt 4 core module
ii  libqtgui4  4:4.8.1-1 Qt 4 GUI module
ii  virtualbox-dkms4.1.14-dfsg-1 x86 virtualization solution - kern
ii  virtualbox-qt  4.1.14-dfsg-1 x86 virtualization solution - Qt b

Versions of packages virtualbox suggests:
ii  vde2  2.3.2-4Virtual Distributed Ethernet
pn  virtualbox-guest-additions-is none (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675140: obnam: cannot merge several exclude options in a config file

[Damien Couroussé]

Package: obnam
Version: 0.29-1
Severity: normal


Hello!

In a config file, I cannot use several occurrences of the 'exclude'
parameter.

For example, I would like to be able to do this in my config file :

--- obnam.cfg ---
# exclude some temp files
exclude = temp

# exclude other files
exclude = another_temp
-

But doing this, --dump-config only shows the last exclude parameter
specified. A workaround is to give all the exclude patterns on the same
exlude line, but it makes the config file more difficult to document.

Furthermore, if an 'exclude' parameter is used in the command line, it
erases the exclude parameters given in a config file.

e.g.

$ obnam --config=obnam.cfg --exclude=perso --exclude=fichier backup 
~/Desktop/temp


regards,
Damien


-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages obnam depends on:
ii  libc6 2.11.3-3   Embedded GNU C Library: Shared lib
ii  python2.6.7-3interactive high-level object-orie
ii  python-cliapp 0.29-1 Python framework for Unix command
ii  python-larch  0.31-1 B-tree library for Python
ii  python-paramiko   1.7.6-5Make ssh v2 connections with Pytho
ii  python-tracing0.6-2  Python debug tracing helper
ii  python-ttystatus  0.18-1 terminal progress bar and status o
ii  python2.6 2.6.7-4An interactive high-level object-o
ii  python2.7 2.7.2-8An interactive high-level object-o

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675141: obnam: please add an 'include' config parameter

[Damien Couroussé]

Package: obnam
Version: 0.29-1
Severity: wishlist


Hello!

It would be nice to have an 'include' parameter in the same way rsync
works.

Thus it would be possible to do things like :
exclude = .*
include = .git

regards,
Damien

-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'stable-updates'), (400, 'testing'), (200, 
'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages obnam depends on:
ii  libc6 2.11.3-3   Embedded GNU C Library: Shared lib
ii  python2.6.7-3interactive high-level object-orie
ii  python-cliapp 0.29-1 Python framework for Unix command
ii  python-larch  0.31-1 B-tree library for Python
ii  python-paramiko   1.7.6-5Make ssh v2 connections with Pytho
ii  python-tracing0.6-2  Python debug tracing helper
ii  python-ttystatus  0.18-1 terminal progress bar and status o
ii  python2.6 2.6.7-4An interactive high-level object-o
ii  python2.7 2.7.2-8An interactive high-level object-o

obnam recommends no packages.

obnam suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#675141: closed by Lars Wirzenius l...@liw.fi (Re: Bug#675141: obnam: please add an 'include' config parameter)

[Damien Couroussé]

Hello Lars,




 -- Message transféré --
 From: Lars Wirzenius l...@liw.fi
 To: Damien Couroussé damien.courou...@gmail.com,
 675141-d...@bugs.debian.org
 Cc:
 Date: Wed, 30 May 2012 13:05:10 +0200
 Subject: Re: Bug#675141: obnam: please add an 'include' config parameter
 On Wed, May 30, 2012 at 08:39:22AM +0200, Damien Couroussé wrote:
  It would be nice to have an 'include' parameter in the same way rsync
  works.
 
  Thus it would be possible to do things like :
  exclude = .*
  include = .git

 Note that exclude in Obnam is a Perl-compatible regular expression
 (full power of the re module's pattern matching language). Your examples
 don't do what you expect them to do. It's possible to use the look-ahead
 operators in the regular expression syntax to do what you want, though.
 Note that rsync's full mechanism for filtering what gets transferred is
 quite powerful, and also quite complicated.


Just for the sake of documenting this issue:
My previous example was maybe not clear before.
In rsync I can an include file and an exlude file similar to this:
= config.exlude 
# repositories to exclude from backup
.local
no_backup
damien/temp

# do not backup local configuration files
/home/damien/.*

# etc etc. ...

 config.include 
# ... do not backup local config files except these ones
/home/damien/.bash*
/home/damien/.profile*
/home/damien/.git*
/home/damien/.tikz*
/home/damien/.reportbug*

# etc etc. ...




 All this demonstrates that adding a really powerful and versatile
 mechanism for picking out what is to be backed up is inherently dangerous,
 and as such will cause people grief when they are setting up their
 backups. It's better to have people back up a bit too much than to
 make it easy for them accidentally back up even a little bit too little.

 Thus I'm not going to implement this. If someone can come up with a
 clean way of doing it, and provides a good patch, I am willing to include
 that in Obnam, however. (In that case, please discuss it in the upstream
 bug tracker or the upstream mailing list, thanks.)


I understand your point.
At the same time using one-liners of Perl regexes can be quite obfuscating.
This is why I would vote for a multi-liner configuration of the
include/exclude patterns.

I do also assume that there is a limitation for doing this from Python
cliapp.



 Sorry. I don't mean to be negative about all your suggestions.

 It's OK.

And thanks for this tool ! It looks nice and I am strongly considering it
as a very good alternative for crypted backups on an external server.

regards,
Damien

Bug#674676: enigmail: tries to use gpg-agent regardless of preference settings

[Damien Couroussé]

Package: enigmail
Version: 2:1.4.1-2
Severity: normal


hello,

I have installed gpg-agent on my system, with pinentry for password
popups.

In enigmail logs, I can see that enigmail correctly finds the running
instance of gpg-agent :

2012-05-26 17:40:59.892 [DEBUG] enigmail.js: detected GnuPG version '1.4.10'
2012-05-26 17:40:59.892 [DEBUG] enigmail.js: detectGpgAgent
2012-05-26 17:40:59.893 [DEBUG] enigmail.js: detectGpgAgent: GPG_AGENT_INFO 
variable available
2012-05-26 17:40:59.893 [DEBUG] enigmail.js: detectGpgAgent: 
GPG_AGENT_INFO='/tmp/gpg-wjPfhv/S.gpg-agent:2663:1'

However, if I disable the use of gpg-agent in enigmail preferences, it
still tries to reach gpg-agent for querying the gpg password.


regards,
Damien



-- System Information:
Debian Release: 6.0.5
  APT prefers stable-updates
  APT policy: (990, 'stable-updates'), (990, 'stable'), (450, 'testing'), (300, 
'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages enigmail depends on:
ii  gnupg 1.4.10-4   GNU privacy guard - a free PGP rep
ii  icedove   11.0-1 mail/news client with RSS and inte
ii  libc6 2.13-32Embedded GNU C Library: Shared lib
ii  libgcc1   1:4.7.0-7  GCC support library
ii  libnspr4-0d   4.8.6-1NetScape Portable Runtime Library
ii  libstdc++64.7.0-7GNU Standard C++ Library v3

enigmail recommends no packages.

enigmail suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#664432: enigmail: does not find GnuPG after installation

[Damien Couroussé]

On 18/03/2012 10:43, Willi Mann wrote:
 Hi!

 I have just installed this package.
 Opening the prefs window, it reports that it cannot find GnuPG, but this
 one is installed.
 Works perfectly after I have explicitely given the path to /usr/bin/gpg.

 I cannot reproduce this problem. Could you please create a new profile
 in icedove and check whether enigmail detects the path to gpg there
 itself?

 WM

fixed

Solved by installing v1.4 though the add-ons manager in icedove.
Please upgrade the Debian package!

thanks,
Damien



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#664432: enigmail: fixed with version 1.4-1

[Damien Couroussé]

Package: enigmail
Severity: normal

Sorry for my previous mail; I had not seen that version 1.4 was packaged
in unstable.
I do not report this problem with this version.

Thanks!
Damien


-- System Information:
Debian Release: 6.0.4
  APT prefers stable-updates
  APT policy: (990, 'stable-updates'), (990, 'stable'), (450, 'testing'), (300, 
'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages enigmail depends on:
ii  gnupg 1.4.10-4   GNU privacy guard - a free PGP rep
ii  icedove   10.0.3-1   mail/news client with RSS and inte
ii  libc6 2.13-27Embedded GNU C Library: Shared lib
ii  libgcc1   1:4.6.1-4  GCC support library
ii  libnspr4-0d   4.8.6-1NetScape Portable Runtime Library
ii  libstdc++64.6.1-4GNU Standard C++ Library v3

enigmail recommends no packages.

enigmail suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#664494: gpxviewer: rounding error interrupts GPXViewer

[Damien Couroussé]

Package: gpxviewer
Version: 0.4.1-1
Severity: normal
Tags: upstream

A description of the bug is provided here:
https://bugs.launchpad.net/ubuntu/+source/gpxviewer/+bug/832059

A patch has been provided; please integrate to the Debian package.

regards,
Damien


-- System Information:
Debian Release: 6.0.4
  APT prefers stable
  APT policy: (990, 'stable'), (450, 'testing'), (300, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages gpxviewer depends on:
ii  librsvg2-common  2.34.2-2SAX-based renderer library for SVG
ii  python   2.6.6-3+squeeze6interactive high-level object-orie
ii  python-gnome22.28.1-1Python bindings for the GNOME desk
ii  python-gtk2  2.17.0-4Python bindings for the GTK+ widge
ii  python-osmgpsmap 0.7.2-1 GTK+ library to embed OpenStreetMa
ii  xdg-utils1.0.2+cvs20100307-2 desktop integration utilities from

gpxviewer recommends no packages.

gpxviewer suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#664427: enigmail: version 1.0.1-5 does not work with icedove 8.0

[Damien Couroussé]

Package: enigmail
Version: 2:1.0.1-5
Severity: important

Hello,

I have just installed this package from stable, but I does not work in icedove.
Indeed, in the 'extensions' panel in icedove, it appears the version of
icedove/thunderbird currently installed on my system is not compatible
with enignmail.
I use icedove 8.0.

regards,
Damien


-- System Information:
Debian Release: 6.0.4
  APT prefers stable
  APT policy: (990, 'stable'), (400, 'testing'), (200, 'unstable'), (1, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages enigmail depends on:
ii  gnupg 1.4.10-4   GNU privacy guard - a free PGP rep
ii  libasound21.0.25-2   shared library for ALSA applicatio
ii  libc6 2.11.3-2   Embedded GNU C Library: Shared lib
ii  libgcc1   1:4.4.5-8  GCC support library
ii  libnspr4-0d   4.8.6-1NetScape Portable Runtime Library
ii  libstdc++64.6.2-12   GNU Standard C++ Library v3

Versions of packages enigmail recommends:
ii  icedove   8.0-2+b1   mail/news client with RSS and inte

enigmail suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#664432: enigmail: does not find GnuPG after installation

[Damien Couroussé]

Package: enigmail
Version: 2:1.3.4-2
Severity: normal

Hello,

I have just installed this package.
Opening the prefs window, it reports that it cannot find GnuPG, but this
one is installed.
Works perfectly after I have explicitely given the path to /usr/bin/gpg.

regards,
Damien


-- System Information:
Debian Release: 6.0.4
  APT prefers stable
  APT policy: (990, 'stable'), (400, 'testing'), (200, 'unstable'), (1, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages enigmail depends on:
ii  gnupg 1.4.10-4   GNU privacy guard - a free PGP rep
ii  libc6 2.11.3-2   Embedded GNU C Library: Shared lib
ii  libgcc1   1:4.4.5-8  GCC support library
ii  libnspr4-0d   4.8.6-1NetScape Portable Runtime Library
ii  libstdc++64.6.2-12   GNU Standard C++ Library v3

Versions of packages enigmail recommends:
ii  icedove   8.0-2+b1   mail/news client with RSS and inte

enigmail suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#641477: partially working

[Damien Couroussé]

Package: timer-applet
Severity: normal

Hello,

I do get blinking, and it is working with a custom sound.
I got no sound with the default settings.

regards,

-- System Information:
Debian Release: 6.0.4
  APT prefers stable
  APT policy: (990, 'stable'), (600, 'testing'), (300, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages timer-applet depends on:
ii  gconf2  2.32.4-1 GNOME configuration database syste
ii  gnome-audio 2.22.2-1 Audio files for GNOME
ii  python  2.6.6-3+squeeze6 interactive high-level object-orie
ii  python-central  0.6.16+nmu1  register and build utility for Pyt
ii  python-dbus 0.83.1-1 simple interprocess messaging syst
ii  python-glade2   2.17.0-4 GTK+ bindings: Glade support
ii  python-gnomeapplet  2.30.0-4 Python bindings for the GNOME pane
ii  python-gst0.10  0.10.19-1generic media-playing framework (P
ii  python-gtk2 2.17.0-4 Python bindings for the GTK+ widge
ii  python-notify   0.1.1-2+b2   Python bindings for libnotify

timer-applet recommends no packages.

timer-applet suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#660027: zim: horizontal scrolling has issues with non-wrapped verbatim text lines

[Damien Couroussé]

Package: zim
Version: 0.48-1
Severity: normal
Tags: upstream

Additional info for upstream bug #704728

best regards,




-- System Information:
Debian Release: 6.0.4
  APT prefers stable
  APT policy: (990, 'stable'), (600, 'testing'), (300, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages zim depends on:
ii  python  2.6.6-3+squeeze6 interactive high-level object-orie
ii  python-gtk2 2.17.0-4 Python bindings for the GTK+ widge
ii  python-simplejson   2.1.1-1  simple, fast, extensible JSON enco
ii  python-support  1.0.10   automated rebuilding support for P
ii  python-xdg  0.19-2   Python library to access freedeskt

Versions of packages zim recommends:
ii  python-gtkspell   2.25.3-7   Python bindings for the GtkSpell l

Versions of packages zim suggests:
pn  bzr   none (no description available)
ii  dvipng1.13-1 convert DVI files to PNG graphics
ii  graphviz  2.26.3-5   rich set of graph drawing tools
ii  scrot 0.8-13 command line screen capture utilit

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#606685: evince segfaults in ppdFindChoice () from /usr/lib/libcups.so.2

[Damien Couroussé]

On 13/12/2010 09:46, Josselin Mouette wrote:

severity 606685 important
thanks

Le vendredi 10 décembre 2010 à 23:25 +0100, Damien Couroussé a écrit :
   

Package: evince
Version: 2.22.2-4~lenny1
Severity: grave
Justification: renders package unusable


Hello, evince segfaults when trying to print PDF files on a network
printer.
It looks to be related to this bug report on Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/660731

Printing a PDF file with a KDE application works fine.
Printing (not a PDF file) with another gnome application works fine
also.
 

Thanks for your report.

Are you sure only cups and its libraries were upgraded when you
attempted to install cups from squeeze?

The other possible culprit would be GTK+, which has seen a number of
network-printing-related bug fixes in the meantime.

Cheers,
   

Hi,

Yes, while debugging a bit this problem, I have seen that the segfault 
in libcups comes from a call in libgtk.


However, only cups and the associated libs were upgraded for my concern: 
I asked for an upgrade of libcups2 from lenny to squeeze (I am mostly 
based on lenny but use a few packages from squeeze and/or lenny-backports).


Here is the log from /var/log/aptitude:
##
Will install 11 packages, and remove 14 packages.
91.1MB of disk space will be freed
===
[REMOVE, NOT USED] foomatic-db-gutenprint
[REMOVE, NOT USED] foomatic-db-hpijs
[REMOVE, NOT USED] ijsgutenprint
[REMOVE, NOT USED] libgutenprint2
[REMOVE, NOT USED] libijs-0.35
[REMOVE, NOT USED] openprinting-ppds
[REMOVE, NOT USED] python-foomatic
[REMOVE, NOT USED] python-ipy
[HOLD, DEPENDENCIES] dpkg-dev
[HOLD, DEPENDENCIES] gcc-4.4-base
[HOLD, DEPENDENCIES] libicu44
[HOLD, DEPENDENCIES] libmagick++10
[HOLD, DEPENDENCIES] libmagick10
[HOLD, DEPENDENCIES] libpurple0
[HOLD, DEPENDENCIES] libx11-6
[HOLD, DEPENDENCIES] libx11-dev
[HOLD, DEPENDENCIES] libxml2-utils
[HOLD, DEPENDENCIES] linux-image-2.6.26-2-686
[HOLD, DEPENDENCIES] linux-libc-dev
[HOLD, DEPENDENCIES] linux-patch-debian-2.6.26
[HOLD, DEPENDENCIES] linux-source-2.6.26
[HOLD, DEPENDENCIES] linux-source-2.6.32
[HOLD, DEPENDENCIES] linux-support-2.6.26-2
[HOLD, DEPENDENCIES] mysql-common
[HOLD, DEPENDENCIES] openssl
[HOLD, DEPENDENCIES] pidgin-data
[HOLD, DEPENDENCIES] python-libxml2
[HOLD, DEPENDENCIES] xserver-xorg-core
[INSTALL, DEPENDENCIES] libgssapi-krb5-2
[INSTALL, DEPENDENCIES] libk5crypto3
[INSTALL, DEPENDENCIES] libkrb5-3
[INSTALL, DEPENDENCIES] libkrb5support0
[REMOVE, DEPENDENCIES] cups
[REMOVE, DEPENDENCIES] cups-driver-gutenprint
[REMOVE, DEPENDENCIES] hal-cups-utils
[REMOVE, DEPENDENCIES] hplip-cups
[REMOVE, DEPENDENCIES] printconf
[HOLD] base-files
[HOLD] dpkg
[HOLD] exim4
[HOLD] exim4-base
[HOLD] exim4-config
[HOLD] exim4-daemon-light
[HOLD] imagemagick
[HOLD] libssl0.9.8
[HOLD] libstdc++6
[HOLD] libxml2
[HOLD] linux-tree-2.6.26
[HOLD] pidgin
[REMOVE] libcupsys2
[UPGRADE] libcups2 1.3.8-1+lenny8 - 1.4.5-1
[UPGRADE] libgcrypt11 1.4.1-1 - 1.4.5-2
[UPGRADE] libgnutls26 2.4.2-6+lenny2 - 2.8.6-1
[UPGRADE] libgpg-error0 1.4-2 - 1.6-1
[UPGRADE] libkrb53 1.6.dfsg.4~beta1-5lenny4 - 1.8.3+dfsg-3
[UPGRADE] libtasn1-3 1.4-1 - 2.7-1
[UPGRADE] python-cups 1.9.31-1 - 1.9.48-1
===
Log complete.
Aptitude 0.4.11.11: log report
Fri, Dec 10 2010 21:11:15 +0100

IMPORTANT: this log only lists intended actions; actions which fail due to
dpkg problems may not be completed.

##

I do use the following libs in GTK:
$ dpkg -l '*libgtk*' | grep ^i
ii  libgtk-vnc-1.0-0   
0.3.8-2A VNC viewer widget for GTK+ (runtime 
libraries)
ii  libgtk2-perl   
1:1.190-1  Perl interface to the 2.x series of the 
Gimp Too
ii  libgtk2.0-0
2.18.6-1~bpo50+1   The GTK+ graphical user interface library
ii  libgtk2.0-0-dbg
2.18.6-1~bpo50+1   The GTK+ libraries and debugging symbols
ii  libgtk2.0-bin  
2.12.12-1~lenny2   The programs for the GTK+ graphical user 
interfa
ii  libgtk2.0-common   
2.12.12-1~lenny2   Common files for the GTK+ graphical user 
interfa
ii  libgtkhtml2-0  
2.11.1-2   HTML rendering/editing library - runtime 
files
ii  libgtkhtml3.14-19  
3.18.3-1   HTML rendering/editing library - runtime 
files
ii  libgtkmm-2.4-1c2a  
1:2.12.7-1 C++ wrappers for GTK+ 2.4 (shared libraries)
ii  libgtksourceview-common
1.8.5-1common files for the GTK+ syntax 
highlighting wi
ii  libgtksourceview1.0-0  
1.8.5-1

Bug#606685: upgrading cups fixed the bug

[Damien Couroussé]

Hello,

I have upgraded my cups packages to testing, it seems that the problem 
is fixed.
If you have interested I have kept a core file for the problem I have 
reported yesterday.


Currently (with issue fixed) the list of cups packages on my computer is:
$ dpkg -l '*cups*' | grep ^i
ii  cups   
1.4.4-7Common UNIX Printing System(tm) - server
ii  cups-client
1.4.4-7Common UNIX Printing System(tm) - client pro
ii  cups-common
1.4.4-7Common UNIX Printing System(tm) - common fil
ii  cups-driver-gutenprint 
5.2.6-1printer drivers for CUPS
ii  cups-ppdc  
1.4.4-7Common UNIX Printing System(tm) - PPD manipu
ii  cupsddk
1.4.4-7Common UNIX Printing System (transitional pa
ii  ghostscript-cups   
8.71~dfsg2-6   The GPL Ghostscript PostScript/PDF interpret
ii  libcups2   
1.4.4-7Common UNIX Printing System(tm) - Core libra
ii  libcups2-dev   
1.4.4-7Common UNIX Printing System(tm) - Developmen
ii  libcupscgi1
1.4.4-7Common UNIX Printing System(tm) - CGI librar
ii  libcupsdriver1 
1.4.4-7Common UNIX Printing System(tm) - Driver lib
ii  libcupsimage2  
1.4.4-7Common UNIX Printing System(tm) - Raster ima
ii  libcupsmime1   
1.4.4-7Common UNIX Printing System(tm) - MIME libra
ii  libcupsppdc1   
1.4.4-7Common UNIX Printing System(tm) - PPD manipu
ii  libcupsys2 
1.3.8-1+lenny8 Common UNIX Printing System (transitional pa
ii  libgnomecups1.0-1  
0.2.3-3GNOME library for CUPS interaction
ii  python-cups
1.9.31-1   Python bindings for CUPS
ii  python-cupsutils   
1.0.0-4lenny1  Python utility modules around the CUPS print



Cheers,
Damien



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#606685: evince segfaults in ppdFindChoice () from /usr/lib/libcups.so.2

[Damien Couroussé]

Package: evince
Version: 2.22.2-4~lenny1
Severity: grave
Justification: renders package unusable


Hello, evince segfaults when trying to print PDF files on a network
printer.
It looks to be related to this bug report on Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/660731

Printing a PDF file with a KDE application works fine.
Printing (not a PDF file) with another gnome application works fine
also.

I did a few tracing with gdb (after having installed evince-dbg). Here
it is below.

Cheers
Damien


===

Starting program: /usr/bin/evince
[Thread debugging using libthread_db enabled]
[New Thread 0xb6219940 (LWP 10930)]
[New Thread 0xb6056b70 (LWP 10933)]
[New Thread 0xb529cb70 (LWP 10934)]
[New Thread 0xb48ffb70 (LWP 10935)]
[New Thread 0xb40feb70 (LWP 10936)]
[Thread 0xb48ffb70 (LWP 10935) exited]
[Thread 0xb40feb70 (LWP 10936) exited]
[New Thread 0xb40feb70 (LWP 10937)]
[Thread 0xb529cb70 (LWP 10934) exited]
[New Thread 0xb529cb70 (LWP 10938)]
[New Thread 0xb48ffb70 (LWP 10939)]
[New Thread 0xb35e0b70 (LWP 10940)]
[Thread 0xb40feb70 (LWP 10937) exited]
[Thread 0xb35e0b70 (LWP 10940) exited]
[Thread 0xb529cb70 (LWP 10938) exited]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb6219940 (LWP 10930)]
0xb2db5c4b in ppdFindChoice () from /usr/lib/libcups.so.2
(gdb) bt
#0  0xb2db5c4b in ppdFindChoice () from /usr/lib/libcups.so.2
#1  0xb4a0d9c8 in ?? () from 
/usr/lib/gtk-2.0/2.10.0/printbackends/libprintbackend-cups.so
#2  0x094a2b08 in ?? ()
#3  0x0004 in ?? ()
#4  0xb2db94eb in ppdPageSize () from /usr/lib/libcups.so.2
#5  0xb71dae46 in gtk_printer_get_default_page_size () from 
/usr/lib/libgtk-x11-2.0.so.0
#6  0xb71e4f28 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
#7  0x0942cc08 in ?? ()
#8  0xfffb in ?? ()
#9  0x0001 in ?? ()
#10 0xbfa07358 in ?? ()
#11 0x in ?? ()
#12 0x0011 in ?? ()
#13 0x0010 in ?? ()
#14 0xb714310e in gtk_tree_view_get_type () from /usr/lib/libgtk-x11-2.0.so.0
#15 0xb6ca5c08 in g_cclosure_marshal_VOID__BOOLEAN () from 
/usr/lib/libgobject-2.0.so.0
#16 0xb6c9813a in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
#17 0xb6cae61d in ?? () from /usr/lib/libgobject-2.0.so.0
#18 0x094c0e18 in ?? ()
#19 0x in ?? ()
(gdb) info threads
  8 Thread 0xb48ffb70 (LWP 10939)  0xb77cb424 in __kernel_vsyscall ()
  2 Thread 0xb6056b70 (LWP 10933)  0xb77cb424 in __kernel_vsyscall ()
* 1 Thread 0xb6219940 (LWP 10930)  0xb2db5c4b in ppdFindChoice () from 
/usr/lib/libcups.so.2




-- System Information:
Debian Release: 5.0.6
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages evince depends on:
ii  gconf2  2.22.0-1 GNOME configuration database syste
ii  gnome-icon-theme2.22.0-1 GNOME Desktop icon theme
ii  libart-2.0-22.3.20-2 Library of functions for 2D graphi
ii  libatk1.0-0 1.30.0-1 The ATK accessibility toolkit
ii  libbonobo2-02.22.0-1 Bonobo CORBA interfaces library
ii  libbonoboui2-0  2.22.0-1 The Bonobo UI library
ii  libc6   2.11.2-7 Embedded GNU C Library: Shared lib
ii  libcairo2   1.8.8-2~bpo50+1  The Cairo 2D vector graphics libra
ii  libdbus-1-3 1.2.1-5+lenny1   simple interprocess messaging syst
ii  libdbus-glib-1-20.76-1   simple interprocess messaging syst
ii  libdjvulibre21  3.5.20-8+lenny1  Runtime support for the DjVu image
ii  libgcc1 1:4.3.2-1.1  GCC support library
ii  libgconf2-4 2.22.0-1 GNOME configuration database syste
ii  libglade2-0 1:2.6.2-1library to load .glade files at ru
ii  libglib2.0-02.24.2-1 The GLib library of C routines
ii  libgnome-keyring0   2.22.3-2 GNOME keyring services library
ii  libgnome2-0 2.20.1.1-1   The GNOME 2 library - runtime file
ii  libgnomecanvas2-0   2.20.1.1-1   A powerful object-oriented display
ii  libgnomeui-02.20.1.1-2   The GNOME 2 libraries (User Interf
ii  libgnomevfs2-0  1:2.22.0-5   GNOME Virtual File System (runtime
ii  libgtk2.0-0 2.18.6-1~bpo50+1 The GTK+ graphical user interface
ii  libice6 2:1.0.4-1X11 Inter-Client Exchange library
ii  libjpeg62   6b1-1The Independent JPEG Group's JPEG
ii  libkpathsea42007.dfsg.2-4+lenny3 TeX Live: path search library for
ii  libnautilus-extensi 2.20.0-7 libraries for nautilus components
ii  liborbit2   1:2.14.13-0.1libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0   1.20.5-6 Layout and rendering of internatio
ii  libpoppler-glib30.8.7-4  PDF rendering library (GLib-based
ii  libpopt0

Bug#603618: aptitude does displays or not an error message depending on LANG settings

[Damien Couroussé]

Package: aptitude
Version: 0.4.11.11-1~lenny1
Severity: important


Hi!


I have met an error with aptitude; I have tried to reproduce the bug
using LANG=C to get more information about the bug on Internet, but
changing the locales made the bug disappear.


$ locale
LANG=fr_FR.UTF-8
LC_CTYPE=fr_FR.UTF-8
LC_NUMERIC=fr_FR.UTF-8
LC_TIME=fr_FR.UTF-8
LC_COLLATE=fr_FR.UTF-8
LC_MONETARY=fr_FR.UTF-8
LC_MESSAGES=fr_FR.UTF-8
LC_PAPER=fr_FR.UTF-8
LC_NAME=fr_FR.UTF-8
LC_ADDRESS=fr_FR.UTF-8
LC_TELEPHONE=fr_FR.UTF-8
LC_MEASUREMENT=fr_FR.UTF-8
LC_IDENTIFICATION=fr_FR.UTF-8
LC_ALL=

$ sudo aptitude update
E: Vous avez dépassé le nombre de descriptions que cette version d'APT est 
capable de traiter.
E: Problem with MergeList 
/var/lib/apt/lists/www.debian-multimedia.org_dists_lenny_main_binary-i386_Packages
E: Les listes de paquets ou le fichier d'état ne peuvent pas être ouverts, ou 
sont incompréhensibles.
E: Vous avez dépassé le nombre de descriptions que cette version d'APT est 
capable de traiter.
E: Problem with MergeList 
/var/lib/apt/lists/www.debian-multimedia.org_dists_lenny_main_binary-i386_Packages
E: Les listes de paquets ou le fichier d'état ne peuvent pas être ouverts, ou 
sont incompréhensibles.
Atteint http://www.debian-multimedia.org lenny Release.gpg
Ign http://www.debian-multimedia.org lenny/main Translation-fr
(... skipping ...)
Atteint http://ftp.fr.debian.org lenny/non-free Sources
Lecture des listes de paquets... Erreur !
E: Vous avez dépassé le nombre de descriptions que cette version d'APT est 
capable de traiter.
E: Problem with MergeList 
/var/lib/apt/lists/www.debian-multimedia.org_dists_lenny_main_binary-i386_Packages
E: Les listes de paquets ou le fichier « status » ne peuvent être analysés ou 
lus.
E: Impossible de reconstruire le cache des paquets
E: Vous avez dépassé le nombre de descriptions que cette version d'APT est 
capable de traiter.
E: Problem with MergeList 
/var/lib/apt/lists/www.debian-multimedia.org_dists_lenny_main_binary-i386_Packages
E: Les listes de paquets ou le fichier d'état ne peuvent pas être ouverts, ou 
sont incompréhensibles.

E: Vous avez dépassé le nombre de descriptions que cette version d'APT est 
capable de traiter.
E: Problem with MergeList 
/var/lib/apt/lists/www.debian-multimedia.org_dists_lenny_main_binary-i386_Packages
E: Les listes de paquets ou le fichier d'état ne peuvent pas être ouverts, ou 
sont incompréhensibles.


$ sudo LANG=C aptitude update
Hit http://www.debian-multimedia.org lenny Release.gpg
(... skipping ...)
Hit http://ftp.fr.debian.org lenny/non-free Sources
Err http://volatile.debian.org squeeze/volatile/non-free Sources
  404 Not Found [IP: 128.31.0.51 80]
Reading package lists... Done


I have seen that bug #550312 reports another issue when setting locales
to UTF-8. This problem might be related (or not).

Cheers,
Damien

-- Package-specific info:
aptitude 0.4.11.11 compilé le Dec  5 2008 02:43:34
Compilateur : g++ 4.3.2
Compilé avec :
  version d'APT : 4 6 0
  version de NCurses : 5.6
  version de libsigc++ : 2.0.18
  gestion d'Ept activée.

versions des bibliothèques :
  version de NCurses : ncurses 5.7.20081213
  version de cwidget : 0.5.12
  version d'APT : 4.6.0
linux-gate.so.1 =  (0xb7712000)
libapt-pkg-libc6.7-6.so.4.6 = /usr/lib/libapt-pkg-libc6.7-6.so.4.6 
(0xb763f000)
libncursesw.so.5 = /lib/libncursesw.so.5 (0xb7601000)
libsigc-2.0.so.0 = /usr/lib/libsigc-2.0.so.0 (0xb75fa000)
libcwidget.so.3 = /usr/lib/libcwidget.so.3 (0xb7536000)
libept.so.0 = /usr/lib/libept.so.0 (0xb7475000)
libxapian.so.15 = /usr/lib/libxapian.so.15 (0xb731f000)
libz.so.1 = /usr/lib/libz.so.1 (0xb730a000)
libpthread.so.0 = /lib/i686/cmov/libpthread.so.0 (0xb72f)
libstdc++.so.6 = /usr/lib/libstdc++.so.6 (0xb71fb000)
libm.so.6 = /lib/i686/cmov/libm.so.6 (0xb71d5000)
libgcc_s.so.1 = /lib/libgcc_s.so.1 (0xb71c8000)
libc.so.6 = /lib/i686/cmov/libc.so.6 (0xb7082000)
libutil.so.1 = /lib/i686/cmov/libutil.so.1 (0xb707e000)
libdl.so.2 = /lib/i686/cmov/libdl.so.2 (0xb7079000)
/lib/ld-linux.so.2 (0xb7713000)
Terminal: xterm
$DISPLAY is set.
`which aptitude`: /usr/bin/aptitude
aptitude version information:

aptitude linkage:

-- System Information:
Debian Release: 5.0.6
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages aptitude depends on:
ii  apt [libapt-pkg-libc6. 0.7.20.2+lenny2   Advanced front-end for dpkg
ii  libc6  2.11.2-7  Embedded GNU C Library: Shared lib
ii  libcwidget30.5.12-4  high-level terminal interface libr
ii  libept00.5.22High-level library for managing De
ii  libgcc11:4.3.2-1.1   GCC support library
ii  libncursesw5

Bug#522722: foomatic: bug is present with ghostscript-cups

[Damien Couroussé]

Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal
File: foomatic


Hello,

I have the same problem.
I do also want to report that the package ghostscript-cups is installed on my 
machine : 
dam...@alain:~$ LANG=C dpkg -l ghos*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ NameVersion Description
+++-===-===-==
ii  ghostscript 8.71~dfsg2-3The GPL Ghostscript 
PostScript/PDF interpreter
ii  ghostscript-cups8.71~dfsg2-3The GPL Ghostscript 
PostScript/PDF interpreter - CUPS filters
un  ghostscript-x   none  (no description 
available)
un  ghostview   none  (no description 
available)

Here is an excerpt of /var/log/cups/error_log:
E [05/Jun/2010:20:05:43 +0200] [Job 435] May not be a PDF file (continuing 
anyway)
D [05/Jun/2010:20:05:43 +0200] [Job 435] Set job-printer-state-message to May 
not be a PDF file (continuing anyway), current level=ERROR
E [05/Jun/2010:20:05:43 +0200] [Job 435] PDF file is damaged - attempting to 
reconstruct xref table...
E [05/Jun/2010:20:05:43 +0200] [Job 435] Couldn't find trailer dictionary
E [05/Jun/2010:20:05:43 +0200] [Job 435] Couldn't read xref table
D [05/Jun/2010:20:05:43 +0200] [Job 435] Cannot process STDIN: Unknown 
filetype.
D [05/Jun/2010:20:05:43 +0200] [Job 435] 
D [05/Jun/2010:20:05:43 +0200] [Job 435] Closing foomatic-rip.
D [05/Jun/2010:20:05:43 +0200] [Job 435] prnt/backend/hp.c 839: ERROR: null 
print job total=0
D [05/Jun/2010:20:05:43 +0200] Discarding unused printer-state-changed event...
D [05/Jun/2010:20:05:43 +0200] Discarding unused job-progress event...
D [05/Jun/2010:20:05:43 +0200] PID 29960 (/usr/lib/cups/filter/pstopdf) stopped 
with status 127!
D [05/Jun/2010:20:05:43 +0200] PID 29961 (/usr/lib/cups/filter/pdftopdf) 
stopped with status 1!
D [05/Jun/2010:20:05:43 +0200] PID 29962 (/usr/lib/cups/filter/foomatic-rip) 
exited with no errors.
D [05/Jun/2010:20:05:43 +0200] PID 29963 (/usr/lib/cups/backend/hp) exited with 
no errors.
D [05/Jun/2010:20:05:43 +0200] Discarding unused job-state-changed event...
E [05/Jun/2010:20:05:43 +0200] [Job 435] Job stopped due to filter errors; 
please consult the error_log file for details.

Kind regards,
Damien


-- System Information:
Debian Release: squeeze/sid
  APT prefers stable
  APT policy: (990, 'stable'), (390, 'testing'), (100, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.31-1-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages foomatic-filters depends on:
ii  bash4.1-3The GNU Bourne Again SHell
ii  debconf [debconf-2.0]   1.5.32   Debian configuration management sy
ii  libc6   2.10.2-9 Embedded GNU C Library: Shared lib
ii  libgs8  8.71~dfsg2-3 The Ghostscript PostScript/PDF int
ii  perl5.10.1-12Larry Wall's Practical Extraction 
ii  ucf 3.0025   Update Configuration File: preserv

Versions of packages foomatic-filters recommends:
ii  cups1.4.3-1  Common UNIX Printing System(tm) - 
ii  cups-bsd [lpr]  1.4.3-1  Common UNIX Printing System(tm) - 
ii  cups-client 1.4.3-1  Common UNIX Printing System(tm) - 
ii  foomatic-db-engine  4.0-20090509-2.1 OpenPrinting printer support - pro
ii  ghostscript 8.71~dfsg2-3 The GPL Ghostscript PostScript/PDF

foomatic-filters suggests no packages.

-- debconf information:
  foomatic-filters/config_parsed: true
  foomatic-filters/spooler: direct
  foomatic-filters/textfilter: Automagic
  foomatic-filters/filter_debug: false
  foomatic-filters/ps_accounting: false
  foomatic-filters/custom_textfilter:



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#571660: /usr/bin/apt-get: could not lock /var.../lib/apt/lists/volatile... (Impossible de verrouiller /var...)

[Damien Couroussé]

Package: apt
Version: 0.7.25.3
Severity: important
File: /usr/bin/apt-get


Hello,

apt-get source reports an error while trying to acquire locks under
/var/lib/apt/lists

 - apt-get is run without root superuser power,
 - non other apt/aptitude processes are running at the same time,
 - except for downloading source packages from time to time, I do not
   use apt (I assume this is the reason why the lock files where not
   available); I use aptitude for system maintenance and installation of
   new packages.
 - the problem was solved by manually creating the required files as a root 
user.

Here is below a more detailed report of the activity where the error
occurred and how it was fixed.

Cheers
Damien




dam...@litaize:~/src$ apt-get source doxygen
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de verrouiller 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_contrib_source_Sources
 - open (2: Aucun fichier ou dossier de ce type)
dam...@litaize:~/src$ lsof | grep apt
dam...@litaize:~/src$ ls -l 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_contrib_source_Sources
ls: ne peut accéder 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_contrib_source_Sources:
 Aucun fichier ou dossier de ce type
dam...@litaize:~/src$ ls -l /var/lib/apt/lists
total 313768
-rw-r--r-- 1 root root   314913 août  15  2009 
ftp2.fr.debian.org_debian_dists_lenny_contrib_binary-i386_Packages
(... skipped)
-rw-r--r-- 1 root root  835 févr. 26 16:08 
ftp.fr.debian.org_debian_dists_unstable_Release.gpg
-rw-r- 1 root root0 avril  5  2009 lock
-rw-r--r-- 1 root root   343193 avril  5  2009 
mirror.home-dn.net_debian-multimedia_dists_stable_main_binary-i386_Packages
(... skipped)
-rw-r--r-- 1 root root 3142 avril 19  2009 
starnux.net_debian_dists_unstable_Release
-rw-r--r-- 1 root root0 févr. 13  2008 
volatile.debian.org_debian-volatile_dists_lenny_volatile_contrib_binary-i386_Packages
-rw-r--r-- 1 root root0 févr. 13  2008 
volatile.debian.org_debian-volatile_dists_lenny_volatile_contrib_source_Sources
-rw-r--r-- 1 root root19794 févr. 26 18:35 
volatile.debian.org_debian-volatile_dists_lenny_volatile_main_binary-i386_Packages
-rw-r--r-- 1 root root 5188 févr. 26 18:35 
volatile.debian.org_debian-volatile_dists_lenny_volatile_main_source_Sources
-rw-r--r-- 1 root root0 févr. 13  2008 
volatile.debian.org_debian-volatile_dists_lenny_volatile_non-free_binary-i386_Packages
-rw-r--r-- 1 root root0 févr. 13  2008 
volatile.debian.org_debian-volatile_dists_lenny_volatile_non-free_source_Sources
-rw-r--r-- 1 root root40723 févr. 26 18:35 
volatile.debian.org_debian-volatile_dists_lenny_volatile_Release
-rw-r--r-- 1 root root  189 févr. 26 18:35 
volatile.debian.org_debian-volatile_dists_lenny_volatile_Release.gpg
-rw-r--r-- 1 root root0 févr. 26 21:14 
volatile.debian.org_debian-volatile_dists_squeeze_volatile_main_source_Sources

dam...@litaize:~/src$ apt-get source doxygen
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de verrouiller 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_main_source_Sources
 - open (2: Aucun fichier ou dossier de ce type)
litaize:/home/damien/src# touch 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_main_source_Sources
dam...@litaize:~/src$ apt-get source doxygen
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de verrouiller 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_contrib_source_Sources
 - open (2: Aucun fichier ou dossier de ce type)
litaize:/home/damien/src# touch 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_contrib_source_Sources
dam...@litaize:~/src$ apt-get source doxygen
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
E: Impossible de verrouiller 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_non-free_source_Sources
 - open (2: Aucun fichier ou dossier de ce type)
litaize:/home/damien/src# touch 
/var/lib/apt/lists/volatile.debian.org_debian-volatile_dists_squeeze_volatile_non-free_source_Sources

dam...@litaize:~/src$ apt-get source doxygen
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Nécessité de prendre 3 192ko dans les sources.
Réception de : 1 http://ftp.fr.debian.org squeeze/main doxygen 
1.6.2+20100208-0.1 (dsc) [1 284B]
Réception de : 2 http://ftp.fr.debian.org squeeze/main doxygen 
1.6.2+20100208-0.1 (tar) [3 170kB]
Réception de : 3 http://ftp.fr.debian.org 

Bug#566685: openbox: Here is a patch

[Damien Couroussé]

Package: openbox
Version: 3.4.10-1
Severity: normal


Hello,

Please find attached a patch
The fix was found here:
http://bugs.archlinux.org/task/17802

Cheers,
Damien

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (600, 'unstable'), (200, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages openbox depends on:
ii  libc62.10.2-2GNU C Library: Shared libraries
ii  libglib2.0-0 2.22.4-1The GLib library of C routines
ii  libice6  2:1.0.6-1   X11 Inter-Client Exchange library
ii  libobparser213.4.10-1parsing library for openbox
ii  libobrender213.4.10-1rendering library for openbox them
ii  libsm6   2:1.1.1-1   X11 Session Management library
ii  libstartup-notification0 0.10-1  library for program launch feedbac
ii  libx11-6 2:1.3.3-1   X11 client-side library
ii  libxau6  1:1.0.5-1   X11 authorisation library
ii  libxext6 2:1.1.1-2   X11 miscellaneous extension librar
ii  libxinerama1 2:1.1-2 X11 Xinerama extension library
ii  libxml2  2.7.6.dfsg-2+b1 GNOME XML library
ii  libxrandr2   2:1.3.0-3   X11 RandR extension library
ii  libxrender1  1:0.9.5-1   X Rendering Extension client libra

Versions of packages openbox recommends:
ii  openbox-themes1.0.2  Themes for the Openbox window mana

Versions of packages openbox suggests:
pn  libxml2-dev   none (no description available)
ii  menu  2.1.43 generates programs menu for all me
ii  obconf2.0.3-3Preferences manager for Openbox wi
ii  python2.5.4-9An interactive high-level object-o
ii  ttf-dejavu2.30-2 Metapackage to pull in ttf-dejavu-

-- no debconf information
--- openbox-gnome-session   2010-02-25 20:46:47.0 +0100
+++ /usr/bin/openbox-gnome-session  2010-02-25 20:44:54.0 +0100
@@ -37,7 +37,7 @@
   if test -z $SESSION; then
   # if its empty then just run openbox
   SESSION=[openbox]
-  elif test -z $(echo $SESSION | grep -q openbox); then
+  elif ! test -z $(echo $SESSION | grep -q openbox); then
   # if openbox isn't in the session then append it
   SESSION=${SESSION%]},openbox]
   fi