Just want to pipe in that I’m also affected by this bug, which
seems very severe. I don’t see how this package is usable /at
all/, in any configuration, in its current state.
I’m on a ThinkStation P360, which has both Intel and nVidia GPUs
-- but I only use the nVidia GPU. Spread through a
I agree with this, and think it should get bumped in severity to
ensure a fix goes out with Bookworm.
My NAS’ root fs is inside a LUKS container, and the key for my ZFS
pool is inside that. Because zfs load-key isn’t called at boot,
multiple services fail to start, and I have to manually
Adding, this issue means Xorg can’t detect the nVidia GPU *at
all*, even if you simply fire it up with no special configuration.
Perhaps it works on machines with a single nVidia card? But on my
machine with Intel and nVidia, straight out of the box, it doesn’t
work *at all*.
Verified that
Package: collectd-core
Version: 5.12.0-7
Severity: wishlist
Dear Maintainer,
I want to use collectd to monitor my UPS, but I’m not able to,
since collectd isn’t build with the --enable-nut flag.
Would it be possible to include support for this, either in the
collectd-core package or a
Package: pantalaimon
Version: 0.9.1-1
Severity: normal
X-Debbugs-Cc: none, i...@retrospec.tv, Ian Eure
If you run panctl with:
TERM=dumb panctl
It echos every key pressed a number of times proportional to the
number of times enter has been pressed:
phaktory!ieure:~$ TERM=dumb panctl
Tatsuya Kinoshita writes:
Anyway, this bug will be fixed in the Emacs 26.3 release.
Is there any chance of that getting included in 10.1 or 10.2? I
was hoping one of the upcoming bugfix releases might get a new
Emacs with the fix included.
I’m aware of the workarounds, but I think
Package: emacs
Version: 1:26.1+1-3.2
Severity: grave
Tags: upstream
The version of Emacs shipped in buster has a bug which causes synchronous HTTPS
requests to fail due to a GnuTLS race condition. It’s been reported and fixed
upstream: https://debbugs.gnu.org/cgi/bugreport.cgi?bug=34341
Known
This looks like a dupe of #892611. Both were reported around the
same
time, March 2018.
I don’t think this is a GTK bug. I purged emacs25-gtk and
installed
emacs25-lucid, and Emacs crashes exactly the same.
I’ve been experiencing this crash for a while as well, using mu4e.
Because I use exwm, it’s extra annoying -- my whole X session
crashes.
Multiple stretch machines don’t experience the issue.
My workaround is to launch Emacs in a terminal and archive the
offending message(s).
I’d very much
Brice Goglin wrote:
Hi,
About 6 years ago, you reported a bug to the Debian BTS regarding VT
switch not working on a Powerbook 3400 machine with a Chips graphic
board. Someboyd replied about a year ago that the problem was apparently
fixed. Did you reproduce this problem recently? With
Same problem as Rich reported. Old kernel was using the regular text
console. System now boots with fbcon. It dies sometime after the network
configuration with the endless scrolling rivafb_pan_display messages.
It's been my experience that fbcon is slow and unreliable, and I don't
think it
On Tuesday 09 August 2005 08:30 pm, Craig Small wrote:
On Mon, Aug 08, 2005 at 06:36:38PM -0700, Ian Eure wrote:
When I install jffnms, I have several problems:
Which sort of database are you using?
MySQL.
Additionally, there is no way to change the database (or any other
Package: jffnms
Version: 0.8.1-2
Severity: important
When I install jffnms, I have several problems:
- `dbadmin' debconf option is not set. It remains the default (`root')
even though I changed it in the debconf preinst dialog.
- Database is not created at all.
- Database user is not created
Additionally, even after I set up the database, db user, and seed the
database, I cannot get JFFNMS to work. It redirects to the setup page every
time.
I see that it doesn't like PHP having register_globals off. Is this a
requirement for it to run?
--
To UNSUBSCRIBE, email to [EMAIL
Package: dvd+rw-tools
Version: 5.21.4.10.8-1
Severity: normal
Whenever I burn with growisofs, it writes at 2x the speed I tell it.
-- snip --
# growisofs -dvd-compat -speed=2 -Z /dev/dvd=dvd-image.iso
Executing 'builtin_dd if=dvd-image.iso of=/dev/dvd obs=32k
seek=0'
/dev/dvd: Current Write
I also have this problem. I have a Pioneer DVR-A09XL, which can do up to 16X.
When I burn at 8X or higher, I get errors like this:
LUN appears to be stuck writing LBA=10h, retry in 0ms
Sometimes the writing proceeds and it works fine, but most of the time, I get
a coaster. Burning at 6X or
Package: libwbxml2-utils
Version: 0.9.0-3
Severity: grave
Justification: renders package unusable
xml2wbxml segfaults whenever I try to convert XML - WBXML.
$ xml2wbxml -o test.xml si.xml
Segmentation fault
$
LTrace output:
22452 __libc_start_main(0x80488e0, 4, 0xb894, 0x8049280, 0x80492e0
Package: libwbxml2-utils
Version: 0.9.0-3
Severity: normal
The help info for wbxml2xml has the SL/SI info reversed.
diff -ur wbxml2-0.9.0.orig/tools/wbxml2xml_tool.c
wbxml2-0.9.0/tools/wbxml2xml_tool.c
--- wbxml2-0.9.0.orig/tools/wbxml2xml_tool.c2005-05-24
11:42:09.273127200 -0700
+++
Package: kdevelop3
Version: 4:3.2.0-1
Severity: normal
*** Please type your report below this line ***
Whenever I try to commit a file managed by CVS, KDevelop crashes after I
press the 'OK' button in the 'Commit to Repository' dialog.
Here's the backtrace. I don't know how useful it will be.
There's this patch:
http://marc.theaimsgroup.com/?l=linux-kernelm=110599420505734w=2
and a followup:
http://marc.theaimsgroup.com/?l=linux-kernelm=110608832803819w=2
Any chance of getting this applied?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
On Tuesday 08 March 2005 11:28 am, Brian Kimball wrote:
if you treat it gently :-], it will work, and I've used it to
download two hundreds or so of Gigabytes without any major issue.
I've been using 0.2.1 for around a week, and it's been working very nicely.
Glad to see this get into
Package: kdevelop3
Version: 4:3.1.2-3
Severity: normal
*** Please type your report below this line ***
kdevelop3 suggests htdig 3.2.0, which does not exist in the Debian
archive, nor in NEW.
kdevelop3 does not work with htdig 3.1.6, which is the only Debianized
version available. When I try to
Package: came
Version: 1.9-1
Severity: wishlist
*** Please type your report below this line ***
I've moved the action_post_shot code to after save_image(). This allows
the image to be further processed with external tools, which I find
quite handy.
diff -ur came-1.9.orig/webcam.c
Package: hydrogen
Version: 0.9.1-1
Severity: normal
*** Please type your report below this line ***
When I try to export my track, and have the Jack audio driver selected,
hydrogen crashes. It outputs the following on stdout:
-- snip --
[WARNING] LocalFileMng[readXmlFloat] Error
24 matches
Mail list logo
