Typo, need to add
export APACHE_RUN_USER=www-data
export APACHE_RUN_GROUP=www-data
export APACHE_PID_FILE=/var/run/apache2.pid
not
APACHE_RUN_USER=www-data
APACHE_RUN_GROUP=www-data
APACHE_PID_FILE=/var/run/apache2.pid
Richard
--
To UNSUBSCRIBE, email to
Package: heartbeat
Version: 2.1.3-6lenny1
Severity: important
apache ocf script (/usr/lib/ocf/resource.d/heartbeat/apache) does not specify
the correct environment variables Apache2 needs to start.
When the ocf script runs apache2 it fails with the error
ERROR: apache2: bad user name
Package: mon
Version: 0.99.2-13
Severity: normal
I think the init script is not LSB compliant as it does not return success when
you try and start mon but mon is already running.
This can cause for example heartbeat to fail if you start mon via heartbeat and
mon is already running, accept would
See http://bugzilla.gnome.org/show_bug.cgi?id=344839 for the discussion.
Thanks for the pointer; I've removed the configure flag from the vino
package in SVN following upstream's default and recommendation.
Yes, thanks for the pointer, and thanks for removing it.
It's also worth noting
-maintainer (who also isn't
a DD) to get a DD to upload it for us.
Richard.
From: Mateusz SkowroÅski [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: Richard Burton [EMAIL PROTECTED]
Subject: re: kicad: Broken export from 3D Viewer
Date: Mon, 28 May 2007 09:43:39 +0200
Hello,
Best regards,
Mateusz SkowroÅ
From: Richard Burton [EMAIL PROTECTED]
I built and packaged this version yesterday and it still had the problem
for me. Perhaps it is caused by wxWidgets 2.6, the binary release must be
built against it
Obviously that is supposed to say the binary release must be built against
2.8. Makes
If I can prove that using 2.8 will fix it I'll make sure this bug is marked
as blocked by a suitable wx bug, which might motivate them to get 2.8 into
debian.
Rebuilt against 2.8.4 and the problem still occurs.
Richard.
_
Txt a
I've just tested building against wx 2.8 for another bug, and checked if
this bug is still an issue. The situation is improved, but not quite
perfect. If the kicad language selection is set to Default it starts up in
French fine with fr_CH.UTF-8 as the locale (and no other French ones
block 398615 by 403237
thanks
Kicad has moved to wx 2.8 upstream. I've patched up the latest release (now
pending an upload) to work with 2.6. As they have only recently moved it
wasn't too big a job, but it'll become a bigger job in the future. Also, at
least one of our bugs which was
it is very strange. I've compiled the latest version You packaged and
it works! With wxWidgets 2.6. Screenshots attached.
I now I see why...
And this is a diff beetween kicad-2007-01-15 and kicad-2007-05-25. I
think this one line is the fix for the problem...
+ wxYield(); //
.
Kind Regards
Richard Burton
--
Richard Burton at Atomwide Ltd Tel 0870 236 5000 Fax 0871 236 5000
Unit 2, Ravensquay Business Centre,
Cray Avenue, Orpington, Kent, BR5 4BQ
Mailto:[EMAIL PROTECTED] http://www.atomwide.com/
--
Atomwide Ltd is a company registered in England and Wales
Hi all
I have tested Sean's new version and its seems to work fine on my test
box, I will be rolling this out to 1 of our live servers running
multiple copies of Moodle later today, will let you know how I get on.
Kind Regards
Richard Burton
--
Richard Burton at Atomwide Ltd Tel 0870 236
From: Mateusz SkowroÅski [EMAIL PROTECTED]
Please consider packaging new upstream release: kicad-2007-01-15.
I've had this version packaged for a while, but there was a little bug we
wanted to sort first. I'll try and get that sorted this week so we can make
an upload.
Richard.
Is debugfs enabled by default in the current SID kernel?
Looks to be:
[EMAIL PROTECTED]:/usr/src/linux-headers-2.6.18-4-686# grep DEBUG_FS .config
CONFIG_DEBUG_FS=y
The patch for that is basically pretty simple (look in the code a bit
above that line) but should also be included in zaptel
Would it be possible to upgrade (update ?) the version of kicad to
0.0.20060829-2 in Etch ?
A request has already been made to the release manager.
Richard.
_
Upload 500 photos a month blog with your Messenger buddies on
I know that I can use something like google term, where it would
search for term using google. But if I just type google, it shouldn't
do that, and specially not search for %s.
That is totally weird. I can't imagine why it's doing that, and it
only seems to be when google is used, other terms
Package: libphp-adodb
Version: 4.72-0.1
Severity: grave
Package cannot be installed.
The following packages have unmet dependencies.
libphp-adodb: Depends: phpapi-20050606 but it is not installable or
phpapi-20051025 but it is not installable
Richard.
From: Didier Raboud [EMAIL PROTECTED]
Well.. I use fr_CH.UTF-8 normally, so it was the only one defined in
locales.
If I reconfigure locales to generate fr_CH.ISO-8859-1, it does not work,
but
with fr_FR.ISO-8859-1 (letting fr_CH.UTF-8 as default), it does work.
Ok. I had seen this problem
Kicad is unable to use the locales (thus they are in the package). It
always (and with each component)
reports me :
Cannot set locale to 'fr_FR'
Do you have the french locale available on your system? I get the same error
if I try to switch to french when I only have the gb locale. If I
tags 278581 pending
owner 278581 [EMAIL PROTECTED]
thanks
Package has been uploaded and is in the new package queue, so should find
it's way into unstable in the next few days. We are aware that there is a
newer version available now upstreamsand work is already taking place on
that. We
From: Karl Schmidt [EMAIL PROTECTED]
Is anyone working on packaging this excellent software package?
Yes, the work is done, it just needs a bit more testing and a sponsor for
the upload.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Package: vlc
Version: 0.8.5.debian-2
Severity: wishlist
After the transition to the new vlc package (from the old wxvlc package),
and with the old packages now purged, I seem to have lost the gnome menu
entry for vlc.
dpkg -L vlc | grep desktop shows nothing, which would seem to confirm it's
On Tue, Aug 01, 2006 at 02:20:26PM +, Richard Burton wrote:
http://svn.flexserv.de/websvn/
Great, but how can one checkout the repository? ;P
svn co https://svn.flexserv.de/kicad
First time will take a little while as one of the files (the upstream binary
distribution) is quite large
What is the status of this ITP?
It's active. We have it packaged, but there was some discussion about the
upstream source package, since there is no proper upstream source package
that provides the whole lot. We were considering splitting it into two
upstream packages, one that is the real
So you rebuilt a complete upstream tarball, it seems the sane way to
go to my mind.
Yeah, I'm thinking of changing my mind on what we had said before, at least
to simplify getting out an initial version.
A single reconstructed version had been the original plan, and that's
basically what's
tags 379732 patch
thanks
Via: 1.1 Application and Content Networking System Software 5.3.5
This was an interesting header. Could it be that Cisco Application
and Content Networking System is filtering the connection, and failing
at it?
I think it was probably that that caused the problem,
I am unable to reproduce this. When I visit the HTTP submit URL, it
seem to work as it should (this is the expected output when not using
the popcon script to submit reports):
I get the same when I use a web broswer:
http://popcon.debian.org/cgi-bin/popcon.cgi
GET /cgi-bin/popcon.cgi
Bas, thanks for the patch. Works like a charm, but looks liek there may be
more than one problem here (though I only hit the one). I build against the
stock debian 2.6.17-2 kernel.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
I've produced packages for kicad for my own use and entertainment. They
aren't perfected yet, but they do the job and hopefully wont take too much
to improve to the required standard.
I'd like to take over this ITP, but there is already a queue forming.
Daniel, if you are still interested,
From: Sander Smeenk [EMAIL PROTECTED]
I don't really know what might cause this all. Did you change something
in your spamassassin/local.cf? Or maybe made changes to sa-exim.conf?
Nothing in the spamassassin file was changed, and no recent changes to
sa-exim conf.
Or with purging, did you
I'm drowning in spam here, any more ideas on what I can check? I've tried
purging the sa-exim and spam assassin packages and reinstalling, didn't
help. Logs still show SA appears to be working fine, but sa-exim is still
saying there was an unknown failure.
Richard.
--
To UNSUBSCRIBE,
I sent this once already and it never made it onto the bug tracker, so
trying again.
Which means SA-Exim did work, but SpamAssassin itself failed for some
reason. It would be great if you can search through your logs and see if
you can find out why SpamAssassin isn't working.
From syslog:
Package: xserver-xorg
Version: 1:7.0.15
Severity: grave
xserver-xorg cannot be installed on a clean system. clean system was
created
using DFS cd to bootstrap unstable. Previously I would have installed
xwindows-system-core gnome-desktop-environment to get my desktop.
I wasn't totally sure
This is fixed in version 1:7.0.16 of xserver-xorg in incoming.
Confirmed fixed. Sorry for the dupe (I did check, but somehow missed it).
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Thunderbird promps on startup to set itself as default reader. Clicking
yes
causes it to set the default mail reader to
/usr/lib/thunderbird/thunderbird,
which does not exist.
On next restart it will prompt again, as it does not then recognise this
value
as being correct.
... you
Hi,
Just wondered if you still planned to package this, it's been nearly a year
since the ITP was opened.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: libgtk2.0-0
Version: 2.8.17-1
Severity: important
Installed latest gtk packages in unstable, resulted in immediate loss of
desktop. Lost all icons from desktop, but background image remained. After
logging out and back in again plain grey desktop, no icons or background
image. Right
Package: xserver-xorg
Version: 1:7.0.11
Followup-For: Bug #362672
FYI:
I figured that the X symlink was probably just a left over and not all that
important, so I tried deleting it and doing a reconfigure of the x packages.
This caused the /usr/X11R6/bin folder to be deleted and a new symlink to
close 359781
thanks
As suspected this was caused by 358580, no one actually looked at that bug
(but a duplicate bug was raised later and fixed) or this one, so I'm marking
it as closed myself.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Richard, you said you were able to build fglrx. Did you make something
special ?
I also tried without module-assistant, but cannot figure out why it is
looking
for Makefile.lib.c file.
That module builds fine for me, in fact so far it's the only one that does
against 2.6.16.
bcm5700
For applications that explicitly load libusb.so at runtime with a dlopen
call.
In that case the application is broken. Using libusb.so instead of
libusb-0.1.so.4 does not guarantee that the ABI is the right one.
libusb will (probably) soon be released with a totally new ABI. Both old
and
You should not need the .so file at runtime, but only during development.
That's why the .so file is in the -dev package, as for other libraries, and
as required by the policy.
Why do you need the .so file in the library package?
For applications that explicitly load libusb.so at runtime
libusb package provides no libusb.so, other distros do (checked on redhat)
and
some software expects it. Please provide a libusb.so symlink to real lib
file.
Just install libusb-dev.
That's a workaround, but libusb is provided by the libusb package, not the
libusb-dev package. It
Am I becoming a pain yet?
No, but patches would be cool if you are skilled enough for that. (You
could get svn commit access on svn.debian.org for that)
Sure, no problem. Sorry I've been lazy with patches previously. My alioth
userid is raburton-guest.
I vote for ignore.
Questionable,
From: Eduard Bloch [EMAIL PROTECTED]
Package: apt-cacher
Which version?
Sorry, filed the report on another machine so it didn't pick it up.
Version is 1.5.3 (latest unstable).
Bad. There are checks to prevent exactly this. The only scenario where I
can imagine this happening:
- the
7.2.1-1test1 released.
try
logwatch --print --range all --service secure
That seems to do the job, thanks.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
From: Willi Mann [EMAIL PROTECTED]
Are you sure that the deletion of the group is covered? I only see Deleted
Users, not Deleted Groups in your report. I think this is another spelling
issue, the secure script contains the string remove group instead of
removed group.
Ah yes, I wasn't
From: Willi Mann [EMAIL PROTECTED]
I've released 7.2.1-1test0 as usual.
I'm hope that this fixes the issue, I don't use courier-imap, only the
other courier services.
Fix tested and confirmed.
Thanks, Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
- IMAP Begin
**Unmatched Entries**
couriertls: read: Connection reset by peer: 3 Time(s)
-- IMAP End -
The only question: report or ignore?
I'd say ignore. I can't really see much value in
This appears to be a duplicate of #330081, but since this one is marked
'confirmed' and has a different urgency, I'll leave it to the
maintainers to combine as they see fit.
Yes, it does seem to be the same problem. As it looks to have been fixed now
they should ideally be merged and closed -
Please test the version 7.2.1-0test1
I'm afraid this version seems to be fundamentally broken, this was all I got
in my mail this morning from cron (and no log watch email at all):
/etc/cron.daily/00logwatch:
No mail for root
run-parts: /etc/cron.daily/00logwatch exited with return code
I use exim and courier, and installing sendmail seems to want to remove
them. Does this mean I can no longer use logwatch?
No, you need an mta that provides /usr/sbin/sendmail, in debian terms a
package that provides mail-transport-agent. My sentence was probably the
worst form to express
It appears that this has now been fixed in 2.6.15-3, the localversion file
is now installed with the headers. I have tested it with the zaptel module
and it now installs to the correct location.
Can this bug be closed, or has it been left open for a reason?
Richard.
--
To UNSUBSCRIBE,
thanks. Is this with the latest version 7.1-2 in debian, or on sarge?
7.1-2 in unstable. I've applied the new version for the syslogd restart fix (and waiting till tomorrows report before giving feedback on that), so I'll try and force a couple of these log messages too and see if the new version
I'm not getting the thousands of unmatched entries reported in this bug
(though I handle 2/3 mails a day so I wouldn't expect that many), but I get
a few, here are the ones that I got today (hosts and ips blatted):
**Unmatched Entries**
2006-01-19 22:20:27 Connection from [xxx.119.252.7]
retitle 347847 vlc: Not installable on unstable
thanks
It's not just powerpc, also x86.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: linux-2.6
Version: 2.6.15
When using make module_install with the makefile that comes with the kernel
(/lib/modules/2.6.15-1-686/build/Makefile) modules are not installed into
the correct location in /lib/modules. They build fine but are then installed
to /lib/modules/2.6.15 instead
Congratulations, you are the first to file a bug report against linux
2.6.15 :)
Yay ;-)
Could you tell us exactly what you do to build the module, and check if
this
is not a bug in m-a or your module ?
The official recomended way of building modules is to build inside the
module
tree
KDIR := /lib/modules/$(KVER)/build
modules: $(patsubst %.o,%.c,$(TP_MODULES))
$(MAKE) -C $(KDIR) M=$(PWD) modules
...
install: modules
rm -f /lib/modules/$(KVER)/kernel/$(MDIR)/{tp_base,tp_smapi}.ko
$(MAKE) -C $(KDIR) M=$(PWD) modules_install
We use $(MAKE)
Calling 'make -C /lib/modules/2.6.15-1-686/build kernelrelease' shows
the
kernel release as 2.6.15, but shouldn't this show 2.6.15-1-686, (which
is
defined for UTS_RELEASE in version.h)?
can you give the output of :
dpkg -l | grep linux-header
[EMAIL PROTECTED]:~$ dpkg -l | grep
Package: fglrx-driver
Version: 8.20.8-1
Severity: important
Package depends on xserver-xorg ( 6.8.99), but xserver-xorg in unstable is
now at 6.9.0. If package is forced x-server does not start (fails a version
check on the module at startup).
Richard.
--
To UNSUBSCRIBE, email to [EMAIL
From: Erik van Konijnenburg [EMAIL PROTECTED]
On Wed, Dec 14, 2005 at 10:42:58AM +, Richard Antony Burton wrote:
FYI the above workaround does not work for machines with SATA drives. I
couldn't
find a combination of modules that would get it to boot.
To help debugging, could you post
retitle 338569 java-package: can't run java programs via two symlinks - JVM
not found: libjvm.so
tags 338569 patch
thank
I also hit this problem on i386. It appears that make-jpkg in stable creates
scripts in /usr/bin that are linked via alternatives, instead of double
symlinking to the real
On Tue, 8 Nov 2005 15:34:48 +0100, Sven Luther wrote [typo corrected]:
You can now, just need to add
Recommends: blah to the arch/arch/defines entry.
Now the capability has been added, any chance you could pop this extra line
in? I'd be happy to do it myself, but of course I can't.
Richard.
Andrew,
bcm5700 compiled fine for me on 2.6.14.
In my source the line you mention isn't on line 2478. I had a look to see if
it was in there somewhere else and found this starting at line 2735:
#if (LINUX_VERSION_CODE = 0x020422)
strcpy(info.bus_info, pUmDevice-pdev-slot_name);
#else
2.6.8 is frozen solid for sarge. IF there is interest in having this
added for the etch kernels, can you please reasign it to linux-2.6
I think it should become a permanent addition to all 686 class kernels going
forward, but I don't mind what point that starts at - unstable would be fine
for
Confirmed fix working. Thanks guys.
Richard.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Kernel-images 2.6.x-686 and 2.6.x-k7 shoud recommend libc6-i686,
because libc6-686 improves system performance when running with
2.6.x-686 and 2.6.x-k7 kernel-images.
Thanks for the clarification.
I now agree with your suggestion.
I will get it into the tree, but
my TODO list is rather long
As Sven said vesafb isn't a module at 2.6.14. So for =2.6.14 you need
both,
for 2.6.14 you only need to add fbcon to the conf file.
I'm sure you all spotted it - there is a slight error in the above
statement, so for the record it should read:
As Sven said vesafb isn't a module at 2.6.14. So
This could be changes to video drivers in the kernel. Please describe
your graphics card used.
Oops, I did intened to mention that. It's an Nvidia GeForce 6600GT 128MB
(generic unbranded reference board).
Please try the following:
1) add ramdisk = /usr/sbin/mkinitrd.yaird to
Nvidia. Ok (or ok is perhaps an exageration: problems with this
specific hardware vendor is not really a surprise to me...)
Yeah, but it plays native Linux Quake 4 very nicely!
You did remember to uninstall yaird before regenerating the ramdisk?
Yep, and to confirm it I checked the size of
Try editing /etc/yaird/Default.cfg and add the following:
MODULE vesafb
Ok, that got the vesafb loaded, but that didn't give me video. Added MODULE
fbcon as well and that did the job. This testing was all on the 2.6.12.
As Sven said vesafb isn't a module at 2.6.14. So for =2.6.14 you need
I uploaded a new *untested* package at http://www.bofh.it/~md/debian/ ,
please let me know ASAP if it fixes the bugs you reported (mainly
mousedev and evdev not being automatically loaded).
Sorry, new package doesn't cause mousedev or psmouse to be loaded on my
system, so without adding them
73 matches
Mail list logo
