Package: logwatch
Version: 7.5.0-1
Severity: normal
Dear Maintainer,
the daily logwatch e-mails from my server are quite long due to a list of
entries like this:
"Didn't Summarize: 2019-07-19 04:34:22 SMTP protocol error in "AUTH LOGIN"
H=(xxx.xxx.xxx.xxx) [yyy.yyy.yyy.yyy] AUTH command used
Package: logwatch
Version: 7.4.3+git20161207-2
Severity: normal
Dear Maintainer,
upgrading from Debian jessie to stretch results in excessive unmatched entries
in the SSHD section of logwatch output.
Example:
Failed logins from:
normal number (e.g. 12) of lines in the format: IP-address
Package: fuse
Version: 2.9.0-2+deb7u1
Severity: grave
Dear Maintainer,
running a VM from a disk image on a ntfs-3g partition made this
partition crash with Transport endpoint is not connected yesterday.
This is caused by a well-known bug in fuse 2.9.0 which is fixed in
2.9.2:
Hello!
While searching for futher possibilities to get my system fully usable
again, I discovered
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=699225 -
unfortunately, there seems to be no real help from debian since 1.5
years :-(
Regards,
Richard
--
To UNSUBSCRIBE, email to
In case anyone finds this bug report, here is my workaround. Very, very
sad that there is no official help since 1.5 years :-(
- sudo aptitude install dh-autoreconf libselinux-dev build-essential
- Add testing repo to sources.list
- sudo aptitude update
- apt-get --build source -t testing fuse
Package: gnome-control-center
Version: 1:3.8.3-7
Followup-For: Bug #746252
Dear Maintainer,
since quite a long time, I am not able to use the displays GUI on my Debian
system with Gnome 3.x - the bug was present in Wheezy and now still is in
Jessie/Sid.
Step to reproduce: Open the displays GUI
Package: apt-show-versions
Version: 0.20
Severity: important
Dear Maintainer,
apt-show-versions always has been a great tool to check for old packages that
were still installed but no longer in the repos. However, since the
introduction of mulitarch, it does not recognize installed multiarch
Package: sweethome3d
Version: 3.5+dfsg-1
Severity: grave
Justification: renders package unusable
Dear Maintainer,
trying to run sweethome3d on my Wheezy amd64 system with Intel HD4000 graphics
crashes at startup. Switching Java from openjdk-6-jre 6b24-1.11.3-2 to sun-
java6-jre 6.26-3 (luckily
Package: nbibtex
Version: 0.9.18-10
Severity: important
Dear Maintainer,
trying to use bib2html from nbibtex package fails:
$ bib2html long -o scherping.html scherping.bib
lua5.1: /usr/bin/bib2html:6: module 'bibtex' not found:
no field package.preload['bibtex']
no file
Package: munin
Version: 2.0~rc6-3
Severity: grave
Justification: renders package unusable
Dear Maintainer,
Munin 2.0-rc6 got into testing recently and thus my system got upgraded to it.
Unfortunately, the new version is not useful at the moment, as all graphs are
failing to be created.
Applied the mentioned ugly hack - works! Thanks very much!
Richard
Am 30.05.2012 12:43, schrieb Steve Schnepp:
tag 675153 + pending
severity 675153 normal
thanks
Richard, I think you just didn't edit your munin.conf to add cgitmpdir
as described in a NEWS file.
Anyway, I also feel it should
Package: pitivi
Version: 0.15.0-1
Followup-For: Bug #662856
Dear Maintainer,
I am encountering very similar symptoms (waveform works, but no thumbnails
and stalled rendering) once I add a video from my Canon Ixus 100 camera.
These videos are .MOV with H264 720p30 video and Mono 44.1 kHz PCM
Package: ghostscript
Version: 8.71~dfsg2-6
Severity: normal
As already mentioned by Francesco Parisi fpar...@tiscali.it, the
pdftoraster failed bug is there again. It hit me today, when I tried to
print a pdf from Evince. Luckily, Okular works.
-- System Information:
Debian Release: squeeze/sid
Hello!
On 22.12.2009 12:55, Mike Hommey wrote:
Hi all,
On Sun, Jun 01, 2008 at 06:54:54PM +0200, Richard Scherping wrote:
Package: iceweasel
Version: 3.0~rc1-1
Severity: normal
With many websites, printing with iceweasel 3.0 (tested with b5 and rc1
debian experimental releases) produces
copy program (lik
Versions of packages grsync recommends:
ii ssh-askpass 1:1.2.4.1-7 under X, asks user for a passphras
grsync suggests no packages.
-- no debconf information
Richard Scherping
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
Package: ghostscript
Version: 8.64~dfsg-12
Severity: grave
Justification: renders package unusable
current amd64 package of ghostscript
merom:~# ls -la /var/cache/apt/archives/ghostscript_8.64~dfsg-12_amd64.deb
-rw-r--r-- 1 root root 786102 23. Jun 12:17
-
It seems this is not a ghostscript, but cups problem.
Package cups should depend on ghostscript-cups, as that package now contains
the files in question.
Unfortunately, printing does not work after installing ghostscript-cups, though
- but that is another bug...
Richard
--
To UNSUBSCRIBE,
Package: cups
Version: 1.3.10-2
Severity: important
I got
merom:/home/richard# tail -1 /var/log/cups/error_log
E [27/Jun/2009:12:54:21 +0200] [cups-driverd] Unable to write
/var/cache/cups/ppds.dat - Permission denied
after installing ghostscript-cups (printing was broken with missing
I just updated pdfsam to 1.1.2-1, but startup still fails:
rich...@merom:~$ pdfsam
=
pdfsam
JAVA: java
JAVA_OPTS: -Xmx256m
CLASSPATH:
This has been fixed by the upload of sun-java6-jre, sun-java6-bin,
sun-java6-jdk and ia32-sun-java6-bin in version 6-12-1 to lenny and sid.
Bug can be marked as fixed.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: sun-java6-jre
Version: 6-10-2
Severity: normal
aptitude full-upgrade returns:
The following packages are BROKEN:
ia32-sun-java6-bin sun-java6-bin sun-java6-jre [6-10-2 - 6-12-1]
1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 6381kB of archives.
Package: wpasupplicant
Version: 0.6.6-2
Severity: normal
I am trying to set up a WPA-enabled ad-hoc network between two Debian Lenny
boxes, one with rt73usb WiFi on 2.6.27.4, the other with iwl4965 on 2.6.28.
My wpa_supplicant config:
network={
ssid=MySSID
mode=1
proto=WPA
Update: connection is established correctly after having added ap_scan=2 to
my config file. Still no successfull ping, though - but that is probably
outside the scope of a bug report...
Sorry, this bug can be closed I guess.
Richard
--
To UNSUBSCRIBE, email to
Package: freespeak
Version: 0.3.0-1
Severity: grave
Justification: renders package unusable
merom:~# LANG=C aptitude full-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states...
freespeak 0.3.0-2 works for me.
Thanks for the quick update!
Richard
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
rich...@merom:~$ uname -a
Linux merom 2.6.28 #1 SMP Thu Dec 25 10:22:46 CET 2008 x86_64 GNU/Linux
rich...@merom:~$ apt-cache policy kspread
kspread:
Installiert: 1:1.9.98.3-2
Kandidat: 1:1.9.98.3-2
Versions-Tabelle:
*** 1:1.9.98.3-2 0
1 http://ftp.de.debian.org experimental/main
rich...@merom:~$ kspread
findServiceByDesktopPath: kspreadpart.desktop not found
findServiceByDesktopPath: Office/kspread.desktop not found
Run kbuildsycoca4 then try again.
That did the trick for me - thanks a lot!
Richard
--
To UNSUBSCRIBE, email to
Josselin Mouette schrieb:
Le dimanche 26 octobre 2008 à 09:51 +0100, Richard Scherping a écrit :
gnome-appearance-properties output when started from command line:
---
(gnome-appearance-properties:7061): appearance-properties-WARNING **:
Unknown Tag: comment
(gnome-appearance-properties
The problem seems to have something to do with my user-specific settings - a
newly created user can launch gnome-appearance-settings without any problem.
Can someone direct me to a way to debug what setting this might be and how I
can fix that without deleting everything .* in my home
Package: gnome
Severity: important
Having upgraded my amd64 system from etch to lenny, I tried changing some
appearance options and this is the result:
- gnome-appearance-properties takes 100 % cpu load (one core fully loaded)
and does not load theme previews (big question mark stays there)
-
Jonathan McDowell schrieb:
I'm a bit confused by the statement that kernel-package does not work
with the current set of kernels; I built a 2.6.27-rc4 kernel from
vanilla upstream sources using it over the weekend (on i386) and tend to
build the latest vanilla kernels as they come out on my
I am having the same problem with Google Earth crashing my X Server. Tested
different GE versions with no difference.
Hardware is Thinkpad T61p with nVidia Quadro FX 570M, running Debian Lenny with
custom-built 2.6.27-rc5 kernel and nVidia drivers 177.70.
xorg version:
ii xorg
I am having the same problem. Please reopen this bug! (Why was it marked done
anyway?)
Downgrading to 1.6.3 helps, 1.7.2 does NOT work on amd64.
LoadPlugin: failed to initialize shared library
/usr/lib/flashplugin-nonfree/libflashplayer.so
[/usr/lib/flashplugin-nonfree/libflashplayer.so:
Hi Max!
Thanks for pointing me to the Allow pages to set their own fonts option. For
me printing works fine when I unset that option. Later I found out that the
problem can be solved by a simple aptitude install msttcorefonts - at least
for me!
Thanks again. I'll post back in a couple of days
Package: iceweasel
Version: 3.0~rc1-1
Severity: normal
With many websites, printing with iceweasel 3.0 (tested with b5 and rc1
debian experimental releases) produces unreadable, extremely low-res text
output, often including multiple characters on top of each other.
Example sites:
35 matches
Mail list logo
