from
Trixie. I will report this upstream though so they migrate to a newer
library.
[1]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=3D1050157
Thanks a lot,
--=20
=E2=A2=A0=E2=A3=A4=E2=A3=BC=E2=A3=A7=E2=A3=A4=E2=A1=84 Rock Storm
=E2=A3=B6=E2=A3=BF=E2=A0=8B=E2=A0=99=E2=A3=BF=E2=A3=B6=E2=A0=80https:
libdbd-sqlite3
-- no debconf information
--=20
=E2=A2=A0=E2=A3=A4=E2=A3=BC=E2=A3=A7=E2=A3=A4=E2=A1=84 Rock Storm
=E2=A3=B6=E2=A3=BF=E2=A0=8B=E2=A0=99=E2=A3=BF=E2=A3=B6=E2=A0=80https://gith=
ub.com/rockstorm101
=E2=A2=A8=E2=A0=BF=E2=A0=83=E2=A0=98=E2=A2=BF=E2=A1=85 C304 34B3 632C 464C =
2FAF C741
Package: gnucash
Version: 1:5.1-1+b1
Severity: normal
X-Debbugs-Cc: rockst...@gmx.com
Dear Maintainer,
I get the following error when attempting to import transactions from a
CSV. Downgrading to version 1:4.13-1 works fine with same book and same
CSV file. So I guess this is a regression on the
no packages.
Regards,
--=20
=E2=A2=A0=E2=A3=A4=E2=A3=BC=E2=A3=A7=E2=A3=A4=E2=A1=84 Rock Storm
=E2=A3=B6=E2=A3=BF=E2=A0=8B=E2=A0=99=E2=A3=BF=E2=A3=B6=E2=A0=80https://gith=
ub.com/rockstorm101
=E2=A2=A8=E2=A0=BF=E2=A0=83=E2=A0=98=E2=A2=BF=E2=A1=85 C304 34B3 632C 464C =
2FAF C741 0439 CF52 C968 32FD
=1050157
[2]:
https://alioth-lists.debian.net/pipermail/3dprinter-general/Week-of-Mon-20230807/002330.html
Many thanks,
Rock Storm
Package: printrun
Version: 2.0.1-1
Severity: important
X-Debbugs-Cc: rockst...@gmx.com
Control: forwarded -1 https://github.com/kliment/Printrun/issues/1291
Dear Maintainer,
Initializing pronterface gives the following error which makes 3D views
impossible and only 2D works. Upstream is aware
Package: fq
Version: 0.2.0-1+b1
Severity: normal
X-Debbugs-Cc: rockst...@gmx.com
Dear Maintainer,
Running `man fq` returns a man page that (interestingly) does not relate
to this package. Specifically it returns
`/usr/share/man/man8/tc-fq.8.gz` from the `iproute2` package.
I know that this
On Sat, 2022-12-31 at 15:15 +0100, Santiago Vila wrote:
> El 31/12/22 a las 14:33, Rock Storm escribió:
> > This is interesting because that test didn't fail before and we
> > didn't
> > need the tzdata package installed.
>
> The tests always failed (in bullseye)
nder if there is something else going on. Something out
of the scope of arduino-builder?
Regards,
--
⢀⣤⣀⣼⣧⣀⣤⡀ Rock Storm
⣀⣿⣿⠟⠻⣿⣿⣀ Open Source Advocate
⠛⣿⣿⡄⢠⣿⣿⠛ https://github.com/rockstorm101
⠰⡿⠿⠁⠈⠿⢿⠆ C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
Package: gimp
Version: 2.10.32-1+b2
Followup-For: Bug #1025066
X-Debbugs-Cc: rockst...@gmx.com
Dear Maintainer,
I can reproduce the segmentation fault with simple steps and no
non-latin characters on the text box. Steps:
- Open GIMP
- File > New
- Select the Text Tool
- Place it anywhere and
Package: grip
Version: 4.2.0-3
Severity: important
X-Debbugs-Cc: rockst...@gmx.com
Dear Maintainer,
Program will not even start with the following trace:
```
$ grip -b
Traceback (most recent call last):
File "/usr/bin/grip", line 9, in
load_entry_point('grip==4.2.0', 'console_scripts',
.
Christoph, I'm CCing you here both because you created the salsa CI
configuration file back in the day and because you are the latest
sponsor for this package, in case you feel this should be a blocker for
Printrun updates.
Regards,
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968
2020.3-1
ii libwxbase3.0-0v5 3.0.5.1+dfsg-3
ii libwxgtk3.0-gtk3-0v5 3.0.5.1+dfsg-3
prusa-slicer recommends no packages.
prusa-slicer suggests no packages.
-- no debconf information
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
Versions of packages flameshot suggests:
ii ca-certificates 20211016
ii openssl 1.1.1m-1
-- no debconf information
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
a lot,
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
ution
than to request upstream the latest optiboot be shipped in the next
release? It's probably been requested already as in [1] but has seen no
movement in 4 years. Are there any big regression issues between
optiboot's versions 4.4 and 8.0?
[1]: https://github.com/arduino/ArduinoCore-avr/issues/121
Control: forwarded -1
https://github.com/arduino/ArduinoCore-avr/issues/436
Bug acknowledged. Thank you very much for reporting.
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
engrampa 1.24.1-1+b1
pn gstreamer1.0-tools
ii meld 3.20.4-1
-- no debconf information
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
Control: tags -1 + help
On Sat, 2021-07-03 at 13:14 +0200, Sven Wagner wrote:
> Am Sa., 3. Juli 2021 um 12:27 Uhr schrieb Rock Storm <
> rockst...@gmx.com>:
> >
> > 1. Reinstall package 'openjdk-11-jre'. The report says you've got
> > it
> > already insta
jdk-11-jdk' if it is not already there. Maybe
the arduino package is missing a dependency?
[1]: https://stackoverflow.com/a/63037561
--
Rock Storm
Open PGP: C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
Control: retitle 921150 ITP: golang-github-arduino-go-paths-helper -- Library
to simplify handling of paths
On Fri, Apr 09, 2021 at 12:38:11AM +0530, Nilesh Patra wrote:
> Hi Rock,
>
> On Sun, 11 Aug 2019 21:20:45 +0100 Rock Storm wrote:
> > Dear mentors,
> >
> >
currently under active development: anything can
change at any time, API and UI must be considered unstable until we
release version 1.0.0." Which makes it, in my opinion, unsuitable to
released on Debian stable.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
it should.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
From 0c550d9674f00be30a6db559c749d3ec5443c92b Mon Sep 17 00:00:00 2001
From: Rock Storm
Date: Fri, 15 Jan 2021 16:17:42 +
Subject: [PATCH] d/*.links: Add a link for programmers.txt
Closes: #980118
---
debian/arduino-core-avr.links | 1
Package: wnpp
Severity: wishlist
Owner: Debian Electronics Team
X-Debbugs-Cc: debian-de...@lists.debian.org,
pkg-electronics-de...@alioth-lists.debian.net
* Package name: arduino-ctags
Version : 5.8-arduino11
Upstream Author : Arduino (https://www.arduino.cc)
* URL :
On Sun, Dec 13, 2020 at 06:29:58PM +0100, Jonas Smedegaard wrote:
> Quoting Rock Storm (2020-12-13 18:12:52)
> > Current status of 'perl-modules':
> >
> > $ dpkg -l | grep perl-modules
> > ii perl-modules-5.24 5.24.1-3+deb9u5 all Core Perl modules
> >
recommends no packages.
Versions of packages licensecheck suggests:
ii bash-completion 1:2.11-2
-- no debconf information
--
Rock Storm
GPG KeyID: 4096R/C96832FD
1:1.2.11.dfsg-2
blender recommends no packages.
blender suggests no packages.
-- no debconf information
--
Rock Storm
GPG KeyID: 4096R/C96832FD
e suggests no packages.
-- no debconf information
--
Rock Storm
GPG KeyID: 4096R/C96832FD
that
happens unless somebody shows me another way forward.
[1]: https://github.com/kliment/Printrun/pull/1048
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
signature.asc
Description: PGP signature
rity from normal to important.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
signature.asc
Description: PGP signature
Hi Bouyan Yang,
Thanks a lot for taking care of this. I also appreciate the fact that
you prepared a PR. It's merged now I'm happy with all the changes. Thank
you for the upload. I don't know if it's possible but feel free to upload
straight away if you want.
Regards,
--
Rock Storm
GPG KeyID
Package: freecad
Version: 0.18.4+dfsg2-1
Severity: normal
Dear Maintainer,
While investigating another failure I saw the following error in the
console when running FreeCad. So far I believe it does not impact
usability of the package.
During initialization the error cannot import name
NEW queue which will solve
this issue.
Thanks for the report,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
The new version of Printrun, which uses python
3, is already prepared. It will hopefully be uploaded soon.
Cheers,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
(Please CC me when responding to this bug)
Thanks a lot,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
signature.asc
Description: PGP signature
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=922965#12
> I made an attempt from scratch last
> night, actually, after looking at the previous patches. I’ll continue with
> it, but it will be slow going as I am not a Java dev by trade.
I'm also no Java expert either, any help is welcome :)
C
on it as soon as I can.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
-builder which
I'm removing from this bug because it is technically not affected by it.
Getting Arduino into Debian is on my to-do list, and it will become my
next priority, please bear with me. Contributions are of course very
welcome.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprin
practices that I'd say are
against the DFSG.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
signature.asc
Description: PGP signature
on
it there.
Regards,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
signature.asc
Description: PGP signature
Package: wnpp
Severity: wishlist
Owner: Rock Storm
* Package name: golang-github-arduino-go-timeutils
Version : 0.0~git20171220.d1dd9e3-1
Upstream Author : Arduino
* URL : https://github.com/arduino/go-timeutils
* License : GPL-2.0
Programming Lang: Go
Package: wnpp
Severity: wishlist
Owner: Rock Storm
* Package name: golang-github-arduino-go-paths-helper
Version : 0.0~git20180911.751652d-1
Upstream Author : Arduino
* URL : https://github.com/arduino/go-paths-helper
* License : GPL-2.0
Programming Lang: Go
ing.
All I can say for certain is that 'python3-dbus' is the only dependency I
was missing. If another dependency is missing from the list but I happen
to have it installed by any chance, I could not say.
Thanks,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF
s expected I guess).
$ mate-panel
Cannot register the panel shell: there is already one running.
How can I create a new panel from the command line?
Thanks a lot,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
signature.asc
Description: PGP signature
thon3-pil 5.3.0-1
ii python3-xdg 0.25-4
ii python3-xlib 0.23-2
mate-dock-applet recommends no packages.
mate-dock-applet suggests no packages.
-- no debconf information
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
3.1.3-6
ii libstdc++6 8.2.0-13
libmedc11 recommends no packages.
Versions of packages libmedc11 suggests:
pn libmed-doc
pn libmed-tools
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
com/a/vTCjApt
Thanks a lot for your time,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
/run/systemd/system)
LSM: AppArmor: enabled
Thanks,
--
Rock Storm
GPG KeyID: 4096R/C96832FD
GPG Fingerprint:
C304 34B3 632C 464C 2FAF C741 0439 CF52 C968 32FD
ors-dev, which is not yet in
Debian (ITP #889923) Does it make sense to set this bug as blocked by
it?
* Confirmation of whether the package is useful as is as a dependency
for arduino or changes are needed.
Cheers,
--
Rock Storm
Package: wnpp
Severity: wishlist
Owner: Rock Storm <rockst...@gmx.com>
* Package name: arduino-builder
Version : 1.3.25
Upstream Author : Arduino AG (https://www.arduino.cc/)
* URL : https://github.com/arduino/arduino-builder
* License : GPL-2
Progr
the repository with the latest release.
If you are not interested or you don't mind me taking over the
packaging, it seems the attempt to package Arduino is back on track. So
we would need this dependency packaged soon.
Let me know what you think,
Regards,
--
Rock Storm
Hi guys, so good to see some activity around here!
I tried to package Arduino a while ago but failed miserably and got
distracted with some other projects. I’ll return to it when I find the
time.
I’m sorry but I don’t remember exactly in what state did I leave the
packaging. IIRC, I made
Dear maintainer,
What's the status of this issue? Will it ever be a python3 binary
package?
I fail to use the package 'python-pyglet' for a python3 application, I
keep getting the following error even though the package is installed.
ModuleNotFoundError: No module named 'pyglet'
Thanks
--
On Wed, 2018-01-03 at 11:50 -0300, Ignacio Losiggio wrote:
> Hi! I work on a debian-based distro for education in Argentina and
> recently started working on packaging arduino 1.8.5 (https://github.c
> om/huayralinux/pkg-arduino)
>
> I packaged an old version of MrBean for jackson2
Hi all,
How is this going? Any progress?
After a bit of investigating, it seems to me that a lot of little
packages need to be done to get the complete Arduino suite. Apart from
the arduino package:
* liblistserialsj
* arduino-builder
* And a package for every library such as:
-
Package: slic3r-prusa
Version: 1.37.1+dfsg2-3
Severity: minor
Dear Maintainer,
The about page says "Version 1.33.8.devel" and generated gcode files'
first line says "generated by Slic3r 1.33.8.devel on ..."
I believe the stated version should be 1.37.1.
-- System Information:
Debian Release:
Package: yagv
Version: 0.4~20130422.r5bd15ed+dfsg-3
Severity: grave
Dear Maintainer,
Tried to start yagv but I got the following:
$ yagv
Failed to get python-future
Traceback (most recent call last):
File "/usr/bin/yagv", line 5, in
import pyglet
File
with different upstream
# sources. The bug will be fixed independently for each package, so I'm
# also removing the block.
severity 872273 grave
severity 872258 grave
# This bug renders both packages unusable
thanks
--
Rock Storm
Debian 3D-Printer Packaging Team
signature.asc
Description
ic3r"
>
> as suggested by "Macros in pronsole and pronterface" at
> https://github.com/kliment/Printrun/blob/master/README.md
>
>
> Otherwise, perhaps suggest the sfact package and fix the Slice
> Command and
> Option paths so they point to the correct sfac
On Tue, 2017-04-25 at 22:05 +0900, Osamu Aoki wrote:
> I copied from quilt let's see
>
> /etc/bash_completion.d/quilt has:
>
> [ ${BASH_VERSINFO[0]} '>' 2 -o \
> ${BASH_VERSINFO[0]} = 2 -a ${BASH_VERSINFO[1]} '>' 04 ] \
> && _quilt_complete_opt="-o filenames"
> complete -F
Source: maint-guide
Severity: minor
Dear Maintainer,
On chapter 3 a couple of lines are given to customize quilt. The second
one is supposed to give dquilt the same shell completion feature that
quilt has. However it does not work as expected when auto-completing
for folders. For instance:
thanks for the report.
Miro, I believe you introduced the MimeType line on pronterface.desktop
upstream [1]. Does this happen on Fedora too? Will it make any sense to
forward such change upstream?
Regards,
Rock Storm
3D-Printer Packaging Team
--
[1] https://github.com/kliment/Printrun/commit/a508196694adc98b522ec08a
a47f30c27bdfee07
ry to rename it to "curaengine" for the sake of tab
completion and such, but I'm not sure about this right now.
Cura
====
* This one I haven't been able to build. I'm attaching the build log.
It might be an error on my building tool-chain but please check it
out, just i
On Fri, 2016-11-04 at 17:23 -0700, Walter Landry wrote:
> Here is a tarball.
>
> https://caltech.box.com/s/f64t26xgauc9re6k3sryv5spagipslnu
Thanks for sharing. I'm examining it to see what can be drawn upon.
> I replaced the build system with waf. I have a waf package already.
> Waf is a bit
On Mon, 2016-10-31 at 14:02 -0700, Walter Landry wrote:
> FYI, I created a package for this for my own use.
That's awesome! Is it uploaded somewhere? Could you share it with me? I
would love to take a look at it.
> It is pretty terrible, but if I find the time, I may be able to make
> a proper
Package: wnpp
Severity: wishlist
Owner: Rock Storm <rockst...@gmx.com>
* Package name: gmat
Version : 2015a
Upstream Author : National Aeronautics and Space Administration
* URL : http://gmatcentral.org
* License : Apache-2.0
Programming L
Package: wnpp
Severity: wishlist
Owner: Rock Storm <rockst...@gmx.com>
* Package name: cspice
Version : 0065
Upstream Author : NASA's Navigation and Ancillary Information Facility (NAIF)
* URL : http://naif.jpl.nasa.gov/naif/index.html
* License : public-
Dear Dominic,
I believe this issue has already been fixed in the lastest slic3r
revision, being slic3r/1.2.9+dfsg-3 (the particular changes made that
are related to this issue can be examined here [1]). Could you please
confirm it is fixed so we can close the bug? (or close the bug yourself
if
please)
Thanks a lot,
Rock Storm
3D-Printer Packaging Team
--
[1] https://anonscm.debian.org/git/3dprinter/packages/slic3r.git/commit
/?h=debian=4a55dd0f6e2d1ee8e7bf3a7277dc309643690e9c
signature.asc
Description: This is a digitally signed message part
Dear Maintainers,
I'm having this very same problem but I believe it is not related to
totem exactly but to some of its dependencies.
The problem started after an "apt-get upgrade" where totem was not
updated but the following totem-related packages were:
Packages totem depends on that were
Package: printrun
Version: 0~20150310-1
Severity: normal
X-Debbugs-CC: 3dprinter-gene...@lists.alioth.debian.org
Owner: 3dprinter-gene...@lists.alioth.debian.org
Forwarded: https://github.com/kliment/Printrun/issues/615
Tags: help, confirmed
Dear Maintainer,
Resizing the main window from the
Hi everyone,
A new version has been uploaded [1] that aggregates all comments and
suggestions received thus far. Basically:
* The changelog file has been cleaned up and the epoch change has been
dropped.
* The copyright file has been thoroughly rewritten.
I am looking forward to hearing
On Tue, 9 Feb 2016 11:28:07 +0100 Elimar Riesebieter wrote:
>
> Did you managed to get sound working with a complete install of
> 1.1.0 packages?
I'm sorry I forgot to subscribe to this bug. Yes, upgraded today from
1.0.29 to 1.1.0 and sound works. Current configuration:
$
Package: sponsorship-requests
Severity: normal
Dear mentors,
I am looking for a sponsor for my package "printrun"
* Package name: printrun
Version : 1:0~20150310-1
Upstream Author : Kliment Yanev
* URL : https://github.com/kliment/Printrun
* License :
ure: amd64 (x86_64)
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
--
Rock Storm <rockst...@gmx.com>
signature.asc
Description: This is a digitally signed message part
ure: amd64 (x86_64)
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
--
Rock Storm <rockst...@gmx.com>
Please forget about my previous message, it was supposed to be
delivered to bug #813446 and not #813466.
My apologies,
--
Rock Storm <rockst...@gmx.com>
signature.asc
Description: This is a digitally signed message part
suggested by Felix.
Regards,
Alvaro
--
Rock Storm <rockst...@gmx.com>
signature.asc
Description: This is a digitally signed message part
Package: soundconverter
Version: 3.0.0~alpha1+git20151119-1
Severity: normal
Dear Maintainer,
In the "Add Files" window, whenever trying to filter results by file type, say
".m4a" or ".ogg", no matter what filetype I choose it does not apply the filter
plus I get the following lines in the
79 matches
Mail list logo