Package: bind9
Version: 1:9.18.6-2
Severity: normal
Tags: patch
X-Debbugs-Cc: pkg-apparmor-t...@lists.alioth.debian.org
With apparmor enabled for named, the /var/log/syslog file ends up with
allot of unnecessary DENIED messages,
as the as read access
Package: usbutils
Version: 1:007-2
Severity: normal
File: usb
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* I tried to load a mobile powerbank IAP 4000 fom ISY via USB-Interface.
There were no problems doing this till now
* Now
Package: ricochet-imVersion: 1.1.1-2+b1When launching the program by command
`ricochet`, the font displayed on UI (as shown at http://imgur.com/8kfxw9p)
is meaningless (characters can't be recognized and change the language
setting still display black block characters). I am using Debian GNU/
Hi,
migrating to jessie, i am experiencing the same problem.
Currently live-build is broken on jessie, which distributes version
4.0.3-1 of live-build, not 4.0.4-1. It is currently not possible to build
hdd images, hence it could be very nice to consider this bug as important
and provide a fix
Hi there,
these bugs look like duplicates. There might be more duplicates, because
of the nature of the bug.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678341
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678176
Malte
--
To UNSUBSCRIBE, email to
Package: digikam
Version: 4:2.6.0-1
Hi there,
when I try to adjust the timestamps of a picture and open the
corresponding dialogue, Digikam crashes. Same with the geo localization
dialogue. This behaviour is new and came with some recent updates of
packages other than Digikam. Because when I
Hi there,
I have the same bug in the current Digikam package (I also had this
problem in the one before that). Rotation is not possible. Usually I
rotate not by hand, but by using the Exif information. I get the same
result.
So I installed KDE 4.8.3 with these instructions [1] to see if the
Package: iceweasel
Version: 3.5.16-13
Severity: normal
Connecting to http://javatester.org/ results in Iceweasel locking up.
Attempting to run the radar loop from
http://radar.weather.gov/radar.php?rid=akqproduct=N0Roverlay=1110loop=no
results in a blank frame. Note: the radar download worked
Package: getmail4
Version: 4.20.0-1
Severity: wishlist
Hi there,
I would like to back up mails stored in a GMail account automatically on
a regular basis, while still using said GMail accout. Since I personally
don't need to preserve the folder structure and don't want copies, I
just use the
Package: firmware-b43-installer
Version: 1:015-12
Hi there,
my b43 driver (package linux-image-3.2.0-2-686-pae) couldn't find the
firmware files. So I copied them from /lib/firmware/b43/b43/*fw to
/lib/firmware/b43/*fw
Now the b43 driver can find the firmware files perfectly.
Malte
--
Package: firmware-linux-nonfree
Version: 0.34
Severity: low
Hi there,
I recently tried to install a couple distributions on a Fujitsu Amilo M
1420 laptop. Kubuntu 11.10, Fedora 16 and PCLinuxOS KDE 2011 all crashed
either during install or when booting the installed system. Debian
Squeeze
Package: linux-image-2.6.32-5-xen-amd64
Version: 2.6.32-38
Steps to reproduce:
/usr/sbin/xm save TEST /xen/domains/TEST/checkpoint
/usr/sbin/xm restore /xen/domains/TEST/checkpoint
xm console # hangs, no input possible
Worked with older version about 2 months ago. Not working since update to
Hi,
an upgraded package to 2.4 would, indeed, be nice to have.
Cheers,
Malte
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
The problem seems to be that if the usb-device (hdd,cardreader,etc.) is
plugged in while resp. before booting debian gets 'confused' about the
device(s).
I am able to reproduce the problem:
USB HDD plugged in while booting : UDF-fs: No VRS found, as mentioned
in this bugreport.
USB HDD
Package: amarok
Version: 2.3.1-1
Severity: low
Hi there,
I run IceWM and when I start Amarok it wants to open KWallet. The
KWallet password entry windows appears next to the Amarok splash screen.
But when I type in a wrong password, KWallet will hide behind the Amarok
splash screen and wait
Package: udev
Version: 164-3
Hi there,
I just installed Debian Squeeze on my Thinkpad X41 notebook. Then
installed a couple packages and on reboot the system hangs on this message:
Waiting for /dev to be fully populated... [12.612160] Error: Driver
'pcspkr' is already registered,
Package: rsyslog
Version: 4.6.4-1
Hi there,
I have this in my /var/log/messages
Nov 21 10:51:57 kalypso rsyslogd: [origin software=rsyslogd
swVersion=4.6.4 x-pid=1494 x-info=http://www.rsyslog.com;] rsyslogd
was HUPed, type 'lightweight'.
Nov 21 22:16:07 kalypso kernel: [845766.615554]
On Fri, 05 Nov 2010 you wrote:
Currenty its not possible to connect with ICQ network in soem
situations. This has been fixed with 2.7.5 upstream release.
Same situation here. I can not connect to ICQ since end of October.
Yet this is persistent, not just in some situations.
I was using pidgin
Hi,
I didn't use the installer this is the same system that I installed on the
third of october (see original mail from that day in this report). No reinstall
this time. I guess this update should go against grub-pc rather than the
installer. But maybe it is interesting nonetheless, because
Hi there,
I just removed the spare and that didn't change anything. Otherwise the setup
is exactly the same. I did an aptitude update upgrade first. So it is a
Squeeze system.
grub-install (after apt-get install grub-pc) results in segfault at 10d3b48 ip
00 error 4 in grub-probe[...]
Package: initramfs-tools
Version: 0.98.5
Severity: wishlist
Hi there,
this is most likely not a bug, but rather an error on my part, but I
thought you might be interested in this. I installed a Squeeze system on
an LVM sitting on a Linux softraid 1 array. I have a seperate boot
partition
I should have thought of that one myself (taking out the spare). But
unfortunately I currently don't have access to that machine. I might be back as
early as either this week or this weekend, but I am not sure. Sorry.
Background information: One of the softraid guys said that spinning down
grub-pc segfaults when raid is root. As mentioned before the boot partition is
seperate of that raid in the first 500MB of the first disk (ext3). Lilo runs
fine.
Output of mdadm -D /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sun Oct 3 19:01:49 2010
Raid Level : raid1
Hi there,
I was able to boot into my system using a kernel off the System Rescue CD. But
neither grub-legacy, grub-pc nor lilo was able to install on either the mbr or
any partition.
At that time I only had two partitions on all three drives. One was
softraid1/root and the other
Hi there,
I am currently running linux-image-2.6.32-5-686 and I checked /var/log/kern.log
instead of /var/log/Xorg.0.log for clues after another white screen (I am
pretty tired of testing suspend, because the white screen always happens when I
am right in the middle of work), and here it is.
I have the same issue on an Debian 5.0 vserver installation, Im using tmux only
over an SSH connection.
The screen wont be refreshed, eg if I type something I dont see the
result, till switch the tab and then switch back...
The bug only appears from time to time, also when I dont restart tmux
the
Hi,
I tested the current linux-image-2.6.32-4-686 in Sid and the problem is indeed
still there. Current workaround: Don't use suspend.
I use the laptop while testing and I always lose a little of the stuff I work
on when the screen goes dark (the stuff not saved yet). So I really recommend
I finally got a crash with a log output. The strange thing is that this time it
was an X sever crash instead of just the blank screen.
I had about three to four pm-suspend (without --auto-quirks). This time the
keyboard also did not work any more and the screen went black with hyphen bar
in
I will continue to test new kernels as they come. This has been a long standing
issue. In early 2.6.32 kernels I had an error message right after Grub. This
went away with later versions. At the same time my own compiled kernels (from
recent linux-source-2.6.32) had a blank screen right after
Sry, missed that part.
do you have hotkey-setup installed?
dpkg -l hotkey-setup
and following output please
lspci -vvv
thanks
I don't have hotkey-setup installed
output of lscpi -vvv attached
Thanks for caring so much. I am still not entirely convinced that this is a
Hi there,
with some help from one of the maintainers I found the latest package from sid
and installed it:
http://packages.debian.org/sid/linux-image-2.6.32-4-686
But the problem remains unchanged. And I still don't have any meaningful log
reports. I wanted to add that in former kenel versions
Package: linux-image-2.6.32-3-686
Version: 2.6.32-9
This bug also applies to linux-source and linux-image packages going back to at
least 2.6.30
I have not reported this, because I have no useful log file entries. And I
thought because the chipset is so common that someone else will report it
Hi,
here is some further information. I used this image to make a clean install:
http://cdimage.debian.org/debian-cd/5.0.3/amd64/iso-cd/debian-503-amd64-businesscard.iso
It is an AMD 785G chipset based system with 4 GB of ram and an AMD Phenom II
processor.
To reduce the possible sources of
Package: libc6
Version: 2.10.2-2
Hi,
I don't know where to put this. I wanted to get a Squeeze system. I installed
Lenny on my machine and upgraded it to current Lenny (no packages selected in
tasksel, minimal Debian system installed). Then I tried upgrading and it broke
the system every
Package: libsane
Version: 1.0.20-11
Hi there,
I have a CanoScan Lide 50 USB 2.0 scanner. It is detected fine both in stable
and testing distributions of Debian. But when I press scan in Squeeze Xsane
stalls for about 10 sec and then says there is an I/O error.
I deleted .sane in my home
Hi there,
thx for the upgrade to 3.5, I use Squeeze and have been waiting for it for some
time. I also frequently use different profiles and just went to file a bug
report. I checked if it was already open and here I found it.
If you archive it too soon people might file it again.
Thx,
Malte
Hi there,
The file preferences should be part of icewm-common IMHO, but is not listed
as part of that package. Maybe the bug (if it is a bug) should be listed under
that package.
Since it took me a lot of time to find a preferences file I thought I should
show how I got it for anyone that has
Package: icewm
Version: 1.2.37+1.3.4pre2-8
Hi,
I just installed Debian Squeeze using the current installer. Then I used
dselect to install icewm and X. I also did apt-get install icewm-themes and
dpkg -P icewm-themes after that. Maybe that has something to do with the
following.
The files in
On Sat, Nov 7, 2009 at 1:06 AM, Frans Pop - elen...@planet.nl
+bugreport+wentzel+24599ab956.elendil#planet...@spamgourmet.com wrote:
Did you have the package installed when you ran debtree?
If it was installed, was that at the new or an older version?
I didn't have the package installed
Package: synce-sync-engine
Version: 0.11.1-2
Severity: important
Hello,
I used opensync and synce to sync the contacts between Kontact and my Windows
Mobile 6.1 phone. On the first sync my phone had no contacts. So all contacts
were, in fact, synced to a clean phone. I noticed that only one
I can confirm this behaviour. Even downgrading does not help.
Regards,
Harald
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hi,
I could produce the crash und grab the debugger output. I produced it
by:
* open the presentation
* go to fullscreen
* leave fullscreen
* click some views in view menu
* pick menu start presentation in view menu
here is the debug output:
***
gdb
Hi, it's me again.
I found a reproducible way to crash ooimpress connected to the
fullscreen mode.
* start presentation
* press F9 for fullscreen
* leave fullscreen (ESC)
* View Handout
* View Start Presentation
The backtrace is:
*
(gdb) run
The program being debugged has
Hi,
this might be the same bug. But it is not yet described. When I try to form a
group with the Synce-Plugin in Kitchensync I get an error message:
Unable to open file /usr/share/opensync/defaults/synce-opensync-plugin for
reading:
I have current versions of those packages installed:
Package: network-manager-kde
Version: 1:0.2.2-1
Severity: normal
When setting up a wpa wireless connection using the Network-manager-kde and
failing to connect the dialogue comes back up with default values. All changes
are overwritten including passwort and user name.
This also happens
Package: dns2tcp
Version: 0.4.dfsg-4
Severity: minor
Hi,
the upstream changelog is much longer than the pseudo upstrem
changelog shipped with the package, all changes from 0.4.1 to 0.4.3 are
missing in the shipped changelog:
| Version 0.4.3
| Fix unsigned int pb and error in dns_decode
package: iceweasel
Replaces: firefox ( 2.0+dfsg-1), iceweasel-gnome-support (=
3.0~b5-2), mozilla-firefox
Version: 3.0.1-1
System: Linux 2.6.25-2-686 #1 SMP Fri Jul 18 17:46:56 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+
Hi,
I found the cause for this bug.
The bug was ideed introduced when going from version 21.4.19-1 to 21.4.19-2 and
as such does not come from any change in upstream.
Looking at the changes between 19-1 and 19-2, nothing major was changed.
I was finally able to narrow things down and find
Debian Bug Tracking System - [EMAIL PROTECTED] wrote:
Subject:
Re: Bug#465174: module-assistant doesn't compile nvidia for kernel 2.6.24
From:
Eduard Bloch [EMAIL PROTECTED]
Date:
Sat, 16 Feb 2008 02:18:06 +0100
To:
[EMAIL PROTECTED], [EMAIL PROTECTED]
To:
[EMAIL PROTECTED], [EMAIL PROTECTED]
Hi!
Unless m-a did something wrong (like unpacking the wrong package) this
is a job for nvidia-kernel-source' maintainer, not me.
can you reassign this to him? Would be a little bit easier for me ;-)
/usr/src/modules/nvidia-kernel/nv/nv.c: At top level:
Package: module-assistant
Version: 0.10.8
Severity: important
I compiled a vanilla 2.6.24 and booted. When trying to build the new
nvidia kernel module with module-assistant the compile breaks, leaving
only the option to view the errorlog (provided below).
I tried re-install of modass,
Hi,
this is a duplicate of bug #403425
Regards
K.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: xemacs
Severity: normal
Using ESC-x flyspell-buffer, then clicking on a highlighted word with the
middle mouse button does not yield a menu with the list of suggestions.
Instead, the error Wrong type argument: listp suggestion is printed.
The term suggestion seems to be the first
Sorry, did not notice it was not the correct name for the package until
too late. Please reassign to package xemacs21-basesupport.
Additional information: there is a newer version of xemacs in unstable.
The newer packet the exact same error as in stable.
Karsten
--
To UNSUBSCRIBE, email
Package: tk8.3
Version: 8.3.5-6
Severity: important
Hi,
While t runtime library /usr/lib/libtk8.3.so.1 is in the package tk8.3, as
it should be, the softlink /usr/lib/libtk8.3.so pointing to this file is
in the packagage tk8.3-dev, together with /usr/lib/libtk8.3.a.
That does not make any
Package: mozilla-thunderbird-enigmail
Version: 2:0.91-4sarge2
Severity: grave
Enigmail has had a serious bug for a long time, see
http://bugzilla.mozdev.org/show_bug.cgi?id=9730 for details.
An attacker can send properly crafted encrypted emails to the enigmail
user that will crash the
I've found the cause of the problem: When using a normal browser
cmd.cgi is called from extinfo.cgi, where extinfo.cgi generates the
start_time input parameter. When calling statuswml.cgi it also
calls cmd.cgi but does not generate a start_time parameter. I made
some changes to the code to make
57 matches
Mail list logo
