Package: installation-reports Boot method: CD netinstall Image version: http://cdimage.debian.org/cdimage/etch_di_beta2/i386/iso-cd/debian-testing-i386-netinst.iso (etch beta 2) Date: 20/4/05
Machine: Dell 5150 Processor: Dual Intel P4 2.8GhZ Memory: 512MB Partitions: Allowed installer to configure with a seperate /home/ partition Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02) 0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) 0000:00:02.1 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 0000:03:08.0 Ethernet controller: Intel Corporation 82801G (ICH7 Family) LAN Controller (rev 01) 0000:00:00.0 0600: 8086:2770 (rev 02) 0000:00:01.0 0604: 8086:2771 (rev 02) 0000:00:02.0 0300: 8086:2772 (rev 02) 0000:00:02.1 0380: 8086:2776 (rev 02) 0000:00:1b.0 0403: 8086:27d8 (rev 01) 0000:00:1c.0 0604: 8086:27d0 (rev 01) 0000:00:1d.0 0c03: 8086:27c8 (rev 01) 0000:00:1d.1 0c03: 8086:27c9 (rev 01) 0000:00:1d.2 0c03: 8086:27ca (rev 01) 0000:00:1d.3 0c03: 8086:27cb (rev 01) 0000:00:1d.7 0c03: 8086:27cc (rev 01) 0000:00:1e.0 0604: 8086:244e (rev e1) 0000:00:1f.0 0601: 8086:27b8 (rev 01) 0000:00:1f.1 0101: 8086:27df (rev 01) 0000:00:1f.2 0101: 8086:27c0 (rev 01) 0000:00:1f.3 0c05: 8086:27da (rev 01) 0000:03:08.0 0200: 8086:27dc (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [ O] Configure network HW: [O ] Config network: [ O] Detect CD: [ O] Load installer modules: [O ] Detect hard drives: [ O] Partition hard drives: [ O] Create file systems: [O ] Mount partitions: [ O] Install base system: [O ] Install boot loader: [ O] Reboot: [ O] Comments/Problems: Successful install apart from X stuff. Worked really well until gdm attempted to launch. Then got error X: Xserver not found X packages were not installed so added xserver-common, xserver-xorg, xfonts-base with aptitude Booted gdm fine but could not ctrl-alt to shell logins (corrupted graphics) Reconfigured xserver-xorg to use the i810 driver (motherboard is i945) instead of VESA now works fine Thanks for the good work!
