Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Mon, 17 Sep 2007, Justin Piszcz wrote: On Mon, 17 Sep 2007, Julien Cristau wrote: On Mon, Sep 17, 2007 at 16:12:46 -0400, Justin Piszcz wrote: (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline 1280x1024x85.0 157.50 1280 1344 1504 1728 1024 1027 1028 1072 +hsync +vsync (91.1 kHz) (II) intel(0): Modeline 1600x1200x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz) (II) intel(0): Modeline 1280x1024x84.8 159.50 1280 1376 1512 1744 1024 1027 1034 1078 -hsync +vsync (91.5 kHz) (II) intel(0): Modeline 1280x1024x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline 1024x768x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline 1024x768x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline 800x600x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline 800x600x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline 640x480x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline 640x480x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline 720x400x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) This looks better. Can you add a 'Virtual 1600 1600' line to the Display subsection of your Screen section, and then after X is up run xrandr --output VGA --mode 1600x1200? Cheers, Julien I can test that tomorrow, not local anymore. Section Screen Identifier Default Screen Device Generic Video Card Monitor Generic Monitor DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 Virtual 1600 1600 EndSubSection EndSection Will let you know tomorrow, thanks! Justin. Yes this works, hmm, what is the recommended way to make this happen at KDM time? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Tue, 18 Sep 2007, Justin Piszcz wrote: On Mon, 17 Sep 2007, Justin Piszcz wrote: On Mon, 17 Sep 2007, Julien Cristau wrote: On Mon, Sep 17, 2007 at 16:12:46 -0400, Justin Piszcz wrote: (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline 1280x1024x85.0 157.50 1280 1344 1504 1728 1024 1027 1028 1072 +hsync +vsync (91.1 kHz) (II) intel(0): Modeline 1600x1200x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz) (II) intel(0): Modeline 1280x1024x84.8 159.50 1280 1376 1512 1744 1024 1027 1034 1078 -hsync +vsync (91.5 kHz) (II) intel(0): Modeline 1280x1024x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline 1024x768x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline 1024x768x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline 800x600x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline 800x600x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline 640x480x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline 640x480x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline 720x400x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) This looks better. Can you add a 'Virtual 1600 1600' line to the Display subsection of your Screen section, and then after X is up run xrandr --output VGA --mode 1600x1200? Cheers, Julien I can test that tomorrow, not local anymore. Section Screen Identifier Default Screen Device Generic Video Card Monitor Generic Monitor DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 Virtual 1600 1600 EndSubSection EndSection Will let you know tomorrow, thanks! Justin. Yes this works, hmm, what is the recommended way to make this happen at KDM time? # A program to run before the greeter is shown. Can be used to start an # xconsole or an alternative background generator. Subject to word splitting. # Default is Setup=/etc/kde3/kdm/Xsetup This works, thanks again, is this problem/solution documented anywhere btw? Also, the Virtual was not needed, I removed that from the config, re-ran the xrandr, it worked fine. Justin. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Tue, Sep 18, 2007 at 05:49:42 -0400, Justin Piszcz wrote: Section Screen Identifier Default Screen Device Generic Video Card Monitor Generic Monitor DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 Virtual 1600 1600 EndSubSection EndSection Will let you know tomorrow, thanks! Justin. Yes this works, hmm, what is the recommended way to make this happen at KDM time? In the Screen section, add: Option Monitor-VGA my vga monitor Then add a new section like this: Section Monitor Identifier my vga monitor Option PreferredMode 1600x1200 EndSection This is from memory, so I might have misremembered something; see xorg.conf(5) for the details. Cheers, Julien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
Package: xorg Version: 7.2-5 Distribution: Debian Lenny (testing) Kernel: 2.6.22.6 Intel Driver: ii xserver-xorg-video-intel 2:2.1.0-2 After running apt-get dist-upgrade and switching my xorg.conf to use intel instead of i810 (which no longer exists) I no longer can run at 1600x1200. I have tried the 915 resolution 'hack' but to no avail. My xorg.conf is shown below and my Xorg.0 log is attached and bzip2d. Any help would be appreciated as the highest resolution I can achieve is now only 1280x1024. It appears the i810 driver is now obsolete and no longer supported so reverting back is also not an option. Thanks, Justin. xorg.conf:: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/X11R6/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/X11R6/lib/X11/fonts/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/X11R6/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/X11R6/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/X11R6/lib/X11/fonts/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Section Module Loadi2c Loadbitmap Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadtype1 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRulesxorg Option XkbModelpc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device /dev/input/mice Option ProtocolExplorerPS/2 Option Emulate3Buttons true EndSection Section Device ### Available Driver options are:- ### Values: i: integer, f: float, bool: True/False, ### string: String, freq: f Hz/kHz/MHz ### [arg]: arg optional #Option NoAccel # [bool] #Option SWcursor # [bool] #Option ColorKey # i #Option CacheLines# i #Option Dac6Bit # [bool] #Option DRI # [bool] #Option NoDDC # [bool] #Option ShowCache # [bool] #Option XvMCSurfaces # i #Option PageFlip # [bool] Identifier Generic Video Card Driver intel VendorName Intel Corporation BoardName 82865G Integrated Graphics Controller BusID PCI:0:2:0 EndSection Section Monitor #DisplaySize 360 270 # mm Identifier Generic Monitor VendorName HWP ModelNamehp 9500 ### Comment all HorizSync and VertSync values to use DDC: HorizSync30.0 - 96.0 VertRefresh 50.0 - 160.0 Option DPMS EndSection Section Screen Identifier Default Screen Device Generic Video Card Monitor Generic Monitor DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse EndSection Section DRI Mode0666 EndSection -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Mon, Sep 17, 2007 at 15:17:55 -0400, Justin Piszcz wrote: Section Device Identifier Generic Video Card Driver intel VendorName Intel Corporation BoardName 82865G Integrated Graphics Controller BusID PCI:0:2:0 EndSection Section Monitor #DisplaySize 360 270 # mm Identifier Generic Monitor VendorName HWP ModelNamehp 9500 ### Comment all HorizSync and VertSync values to use DDC: HorizSync30.0 - 96.0 VertRefresh 50.0 - 160.0 Option DPMS EndSection Does it work if you drop the HorizSync and VertRefresh lines from the config file? If not, please send the new log. Cheers, Julien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Mon, Sep 17, 2007 at 16:12:46 -0400, Justin Piszcz wrote: (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline 1280x1024x85.0 157.50 1280 1344 1504 1728 1024 1027 1028 1072 +hsync +vsync (91.1 kHz) (II) intel(0): Modeline 1600x1200x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz) (II) intel(0): Modeline 1280x1024x84.8 159.50 1280 1376 1512 1744 1024 1027 1034 1078 -hsync +vsync (91.5 kHz) (II) intel(0): Modeline 1280x1024x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline 1024x768x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline 1024x768x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline 800x600x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline 800x600x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline 640x480x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline 640x480x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline 720x400x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) This looks better. Can you add a 'Virtual 1600 1600' line to the Display subsection of your Screen section, and then after X is up run xrandr --output VGA --mode 1600x1200? Cheers, Julien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Mon, 17 Sep 2007, Julien Cristau wrote: On Mon, Sep 17, 2007 at 16:12:46 -0400, Justin Piszcz wrote: (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline 1280x1024x85.0 157.50 1280 1344 1504 1728 1024 1027 1028 1072 +hsync +vsync (91.1 kHz) (II) intel(0): Modeline 1600x1200x75.0 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync (94.1 kHz) (II) intel(0): Modeline 1280x1024x84.8 159.50 1280 1376 1512 1744 1024 1027 1034 1078 -hsync +vsync (91.5 kHz) (II) intel(0): Modeline 1280x1024x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline 1024x768x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline 1024x768x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline 800x600x84.9 56.75 800 848 928 1056 600 603 607 633 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline 800x600x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline 640x480x84.6 35.00 640 664 728 816 480 483 487 507 -hsync +vsync (42.9 kHz) (II) intel(0): Modeline 640x480x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline 720x400x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) This looks better. Can you add a 'Virtual 1600 1600' line to the Display subsection of your Screen section, and then after X is up run xrandr --output VGA --mode 1600x1200? Cheers, Julien I can test that tomorrow, not local anymore. Section Screen Identifier Default Screen Device Generic Video Card Monitor Generic Monitor DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 Virtual 1600 1600 EndSubSection EndSection Will let you know tomorrow, thanks! Justin. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Mon, 17 Sep 2007, Julien Cristau wrote: On Mon, Sep 17, 2007 at 15:17:55 -0400, Justin Piszcz wrote: Section Device Identifier Generic Video Card Driver intel VendorName Intel Corporation BoardName 82865G Integrated Graphics Controller BusID PCI:0:2:0 EndSection Section Monitor #DisplaySize 360 270 # mm Identifier Generic Monitor VendorName HWP ModelNamehp 9500 ### Comment all HorizSync and VertSync values to use DDC: HorizSync30.0 - 96.0 VertRefresh 50.0 - 160.0 Option DPMS EndSection Does it work if you drop the HorizSync and VertRefresh lines from the config file? If not, please send the new log. Cheers, Julien Yes I have also tried it without the Horiz/Vert options. Section Monitor #DisplaySize 360 270 # mm Identifier Generic Monitor VendorName HWP ModelNamehp 9500 ### Comment all HorizSync and VertSync values to use DDC: #HorizSync30.0 - 96.0 #VertRefresh 50.0 - 160.0 Option DPMS EndSection Log attached. X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian (xorg-server 2:1.3.0.0.dfsg-12) Current Operating System: Linux myfqdn.domain.com 2.6.22.6 #1 Mon Sep 17 13:20:43 EDT 2007 i686 Build Date: 09 August 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon Sep 17 16:11:43 2007 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device Generic Video Card (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi does not exist. Entry deleted from font path. (WW) The directory /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType does not exist. Entry deleted from font path. (WW) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81e5140 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2570 card 103c,12bc rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2572 card 103c,12bc rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24d2 card 103c,12bc rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card
Bug#442909: xorg upgrade i810-intel driver broke 1600x1200 resolution on Intel 865G chipset
On Mon, Sep 17, 2007 at 15:17:55 -0400, Justin Piszcz wrote: my Xorg.0 log is attached and bzip2d. No it's not. Please resend the log (no need to compress it). Cheers, Julien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]