Package: linux-image-2.6.24-1-amd64 Version: 2.6.24-5 Severity: important
my wifi is losing conectivity and sending the next message to kernel - eth1: switched to short barker preamble maybe this is connected to bug: 462711 (same error there ) here is the message : eth1: Initial auth_alg=0 eth1: authenticate with AP 00:11:6b:22:7f:76 eth1: RX authentication from 00:11:6b:22:7f:76 (alg=0 transaction=2 status=0) eth1: authenticated eth1: associate with AP 00:11:6b:22:7f:76 eth1: RX AssocResp from 00:11:6b:22:7f:76 (capab=0x421 status=0 aid=1) eth1: associated eth1: switched to short barker preamble (BSSID=00:11:6b:22:7f:76) this appers dozens of times in dmesg -- Package-specific info: ** Version: Linux version 2.6.24-1-amd64 (Debian 2.6.24-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 16:52:38 UTC 2008 ** Command line: root=/dev/sda7 ro quiet ** Not tainted ** Kernel log: hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 sd 0:0:0:0: [sda] Attached SCSI disk Attempting manual resume swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Video Bus as /class/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44 input: PC Speaker as /class/input/input8 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Yenta: ISA IRQ mask 0x0cf8, PCI irq 20 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1) ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 mmc0: SDHCI at 0xb0202800 irq 23 PIO sdhci: SDHCI controller found at 0000:06:04.4 [1524:0551] (rev 1) PCI: Enabling device 0000:06:04.4 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:04.4[B] -> GSI 23 (level, low) -> IRQ 23 mmc1: SDHCI at 0xb0202100 irq 23 PIO b43-phy0: Broadcom 4318 WLAN found phy0: Selected rate control algorithm 'simple' udev: renamed network interface wlan0 to eth1 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /class/input/input9 Adding 1951856k swap on /dev/sda6. Priority:-1 extents:1 across:1951856k EXT3 FS on sda7, internal journal loop: module loaded input: Acer hotkey driver as /class/input/input10 Acer Travelmate hotkey driver v0.5.35 acerhk: Your hardware does not need polling enabled for hotkeys to work, you can safely disable polling by using the module parameter poll=0 (unless you want to play around with the driver and see if there are buttons which need polling). kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link down pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 input: b43-phy0 as /class/input/input11 Registered led device: b43-phy0:tx Registered led device: b43-phy0:rx Registered led device: b43-phy0:radio hda-intel: Invalid position buffer, using LPIB read method instead. eth1: Initial auth_alg=0 eth1: authenticate with AP 00:11:6b:22:7f:76 eth1: RX authentication from 00:11:6b:22:7f:76 (alg=0 transaction=2 status=0) eth1: authenticated eth1: associate with AP 00:11:6b:22:7f:76 eth1: RX AssocResp from 00:11:6b:22:7f:76 (capab=0x421 status=0 aid=1) eth1: associated eth1: switched to short barker preamble (BSSID=00:11:6b:22:7f:76) mmc1: new SD card at address 1fe1 mmcblk0: mmc1:1fe1 SD512 500224KiB (ro) mmcblk0: p1 mmc1: card 1fe1 removed ** Loaded modules: Module Size Used by nls_iso8859_1 9728 0 nls_cp437 11392 0 vfat 17920 0 fat 58288 1 vfat mmc_block 18816 0 rfkill_input 9600 0 rfcomm 46240 2 l2cap 29568 9 rfcomm bluetooth 65956 4 rfcomm,l2cap ppdev 13832 0 parport_pc 42408 0 lp 17476 0 parport 44812 3 ppdev,parport_pc,lp acerhk 39968 0 loop 22788 0 joydev 17536 0 arc4 6528 2 ecb 8192 2 blkcipher 11780 1 ecb b43 120616 0 rfkill 12816 3 rfkill_input,b43 snd_hda_intel 362024 1 mac80211 132236 1 b43 snd_pcm_oss 46624 0 snd_mixer_oss 21376 1 snd_pcm_oss cfg80211 19856 1 mac80211 snd_pcm 89352 2 snd_hda_intel,snd_pcm_oss led_class 10120 1 b43 sdhci 23172 0 serio_raw 11908 0 pcspkr 7808 0 input_polldev 9872 1 b43 psmouse 45724 0 snd_timer 28552 1 snd_pcm mmc_core 58760 2 mmc_block,sdhci yenta_socket 31756 1 rsrc_nonstatic 16128 1 yenta_socket k8temp 10496 0 snd 65896 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer i2c_piix4 13708 0 soundcore 13216 1 snd snd_page_alloc 15248 2 snd_hda_intel,snd_pcm i2c_core 29824 1 i2c_piix4 video 25620 0 output 8704 1 video container 9856 0 battery 19976 0 ac 11400 0 shpchp 38428 0 pci_hotplug 35504 1 shpchp button 13984 0 evdev 17024 10 ext3 139024 2 jbd 55976 1 ext3 mbcache 13952 1 ext3 sd_mod 33536 4 ide_cd 44704 0 cdrom 39464 1 ide_cd atiixp 9488 0 [permanent] sata_sil 17288 3 generic 9732 0 [permanent] ide_core 144920 3 ide_cd,atiixp,generic 8139cp 28672 0 ata_generic 13060 0 ssb 39428 1 b43 pcmcia 45720 2 b43,ssb pcmcia_core 46500 4 b43,yenta_socket,rsrc_nonstatic,pcmcia firmware_class 15104 2 b43,pcmcia 8139too 33024 0 mii 10240 2 8139cp,8139too ehci_hcd 39692 0 libata 162736 2 sata_sil,ata_generic scsi_mod 170296 2 sd_mod,libata ohci_hcd 28164 0 thermal 22688 0 processor 45032 1 thermal fan 9864 0 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] (rev 10) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00009000-00009fff Memory behind bridge: b0100000-b01fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 IDE interface [0101]: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ATI Technologies Inc IXP SB400 Serial ATA Controller [1002:4379] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at 8440 [size=8] Region 1: I/O ports at 8434 [size=4] Region 2: I/O ports at 8438 [size=8] Region 3: I/O ports at 8430 [size=4] Region 4: I/O ports at 8400 [size=16] Region 5: Memory at b0004000 (32-bit, non-prefetchable) [size=512] [virtual] Expansion ROM at 50000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: sata_sil Kernel modules: ata_generic, sata_sil, generic 00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4374] (rev 80) (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0005000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host Controller [1002:4375] (rev 80) (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0006000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host Controller [1002:4373] (rev 80) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at b0007000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller [1002:4372] (rev 83) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 8410 [size=16] Region 1: Memory at 50080000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller [1002:4376] (rev 80) (prog-if 82 [Master PriP]) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 8420 [size=16] Capabilities: <access denied> Kernel driver in use: ATIIXP_IDE Kernel modules: ata_generic, generic, atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller [1002:437b] (rev 01) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge [1002:4377] (rev 80) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge [1002:4371] (rev 80) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=06, subordinate=08, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: b0200000-b02fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] [1002:5975] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 9000 [size=256] Region 2: Memory at b0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at b0120000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: radeonfb 06:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at a000 [size=256] Region 1: Memory at b0202000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too Kernel modules: 8139too, 8139cp 06:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) Subsystem: AMBIT Microsystem Corp. TravelMate 2410 [1468:0312] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: Memory at b0200000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge Kernel modules: ssb 06:04.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at b0203000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=07, sec-latency=176 Memory window 0: 54000000-57fff000 (prefetchable) Memory window 1: 58000000-5bfff000 I/O window 0: 0000a400-0000a4ff I/O window 1: 0000a800-0000a8ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 06:04.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at b0202400 (32-bit, non-prefetchable) [size=128] Capabilities: <access denied> 06:04.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 18000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 23 Region 0: Memory at b0202800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci 06:04.3 FLASH memory [0501]: ENE Technology Inc FLASH memory: ENE Technology Inc: [1524:0520] (rev 01) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at b0202c00 (32-bit, non-prefetchable) [size=128] Capabilities: <access denied> 06:04.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01) Subsystem: Acer Incorporated [ALI] Unknown device [1025:009f] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 23 Region 0: Memory at b0202100 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci Kernel modules: sdhci -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.20 Debian configuration management sy ii initramfs-tools [linux-initra 0.92 tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.24-1-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64: false linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64: linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]