close 583166
thanks
On 02/24/2013 08:18 PM, Michel Messerschmidt wrote:
On Sat, Feb 23, 2013 at 10:48:04PM +0100, John Paul Adrian Glaubitz wrote:
I just uploaded sane-backends 1.0.23 into experimental. Could you
install it and see whether your scanner works again?
I'm afraid this is not
On Sat, Feb 23, 2013 at 10:48:04PM +0100, John Paul Adrian Glaubitz wrote:
I just uploaded sane-backends 1.0.23 into experimental. Could you
install it and see whether your scanner works again?
I'm afraid this is not possible anymore.
Due to a hardware failure I had to replace the 640U with
Hi,
I just uploaded sane-backends 1.0.23 into experimental. Could you
install it and see whether your scanner works again?
Cheers,
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer - glaub...@debian.org
`. `' Freie Universitaet Berlin - glaub...@physik.fu-berlin.de
`-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 2010-12-21 20:22, Julien BLACHE wrote:
Olaf Meeuwissen olaf.meeuwis...@avasys.jp wrote:
Hi,
Also note that the 640u still doesn't work with epson2 after the fixes
that have been done so far; it's still NAKing some command (there's a
log in
Michel Messerschmidt li...@michel-messerschmidt.de wrote:
Hi,
[epson2] using built in CCT profile
[epson2] esci_set_color_correction_coefficients
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC m
[epson2] buf[0] 1b .
[epson2] buf[1] 6d m
merge 582066 583166
thanks
Hi,
The scanner works with the old 'epson' backend, but not with 'epson2'
although it should have complete support by both backend.
This is a known issue, there is some breakage in epson2 in 1.0.21.
Could you provide a debug log for epson2, by setting
On Wed, May 26, 2010 at 12:57:06PM +0200, Julien BLACHE wrote:
Could you provide a debug log for epson2, by setting
SANE_DEBUG_EPSON2=255 ?
Here is the debug output:
#
$ export SANE_DEBUG_EPSON2=255; scanimage -d epson2:libusb:007:002 -T
[sanei_debug] Setting debug level of epson2 to 255.
Package: libsane
Version: 1.0.21-1
Severity: normal
The scanner works with the old 'epson' backend, but not with 'epson2'
although it should have complete support by both backend.
Steps to reproduce (I had to re-enable epson in dll.conf):
$ scanimage - -L
device `epson2:libusb:007:004' is a
8 matches
Mail list logo
