Package: firmware-b43-lpphy-installer
Version: 4.174.64.19-4
Severity: normal
[6.856309] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[6.889898] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
[6.912802] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
[7.077355] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[7.108439] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input10
[ 12.625470] b43-phy0 ERROR: Fatal DMA error: 0x0400, 0x,
0x, 0x, 0x, 0x
[ 12.635706] b43-phy0 ERROR: This device does not support DMA on your system.
Please use PIO instead.
[ 12.638883] b43-phy0: Controller RESET (DMA error) ...
[ 12.872404] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 18.401289] b43-phy0: Controller restarted
[ 18.402572] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.420893] r8169: eth0: link down
[ 18.421821] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.810769] Bluetooth: L2CAP ver 2.14
[ 18.810776] Bluetooth: L2CAP socket layer initialized
[ 18.861654] Bluetooth: RFCOMM TTY layer initialized
[ 18.861668] Bluetooth: RFCOMM socket layer initialized
[ 18.861675] Bluetooth: RFCOMM ver 1.11
[ 18.893864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.893874] Bluetooth: BNEP filters: protocol multicast
[ 18.900147] lp: driver loaded but no devices found
[ 18.930058] Bridge firewalling registered
[ 18.945037] ppdev: user-space parallel port driver
[ 19.020753] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.020762] Bluetooth: SCO socket layer initialized
[ 24.291486] CPU0 attaching NULL sched-domain.
[ 24.291500] CPU1 attaching NULL sched-domain.
[ 24.317126] CPU0 attaching sched-domain:
[ 24.317135] domain 0: span 0-1 level SIBLING
[ 24.317141] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 24.317153] domain 1: span 0-1 level MC
[ 24.317159]groups: 0-1 (cpu_power = 1178)
[ 24.317170] CPU1 attaching sched-domain:
[ 24.317175] domain 0: span 0-1 level SIBLING
[ 24.317180] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 24.317191] domain 1: span 0-1 level MC
[ 24.317196]groups: 0-1 (cpu_power = 1178)
[ 31.526993] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 31.529508] wlan0: direct probe responded
[ 31.529521] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 31.533272] wlan0: authenticated
[ 31.533329] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 31.538275] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 31.538285] wlan0: associated
[ 31.540546] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.221040] wlan0: no IPv6 routers present
[ 784.488194] No probe response from AP 00:50:7f:39:11:68 after 500ms,
disconnecting.
[ 785.509939] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 785.512521] wlan0: direct probe responded
[ 785.512542] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 785.514545] wlan0: authenticated
[ 785.514634] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 785.517720] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 785.517739] wlan0: associated
[ 915.488144] No probe response from AP 00:50:7f:39:11:68 after 500ms,
disconnecting.
[ 916.510079] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 916.709161] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 2)
[ 916.908175] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 3)
[ 916.910949] wlan0: direct probe responded
[ 916.910965] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 916.914811] wlan0: authenticated
[ 916.914911] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 916.918170] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 916.918190] wlan0: associated
[ 1010.488211] No probe response from AP 00:50:7f:39:11:68 after 500ms,
disconnecting.
[ 1011.502029] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 1011.504583] wlan0: direct probe responded
[ 1011.504605] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 1011.506512] wlan0: authenticated
[ 1011.506614] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 1011.510283] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 1011.510303] wlan0: associated
[ 2319.904191] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 2320.037279] usb 1-8: New USB device found, idVendor=0ace, idProduct=1215
[ 2320.037296] usb 1-8: New USB device strings: Mfr=16, Product=32,
SerialNumber=0
[ 2320.037309] usb 1-8: Product: USB2.0 WLAN
[ 2320.037318] usb 1-8: Manufacturer: ZyDAS
[ 2320.040600] usb 1-8: configuration #1 chosen from 1 choice
[ 2320.191752] usb 1-8: reset high speed USB device using ehci_hcd and address
4
[ 2320.322606] phy1: Selected rate control algorithm 'minstrel'
[ 2320.327112] zd1211rw 1-8:1.0: phy1
[ 2320.327259] usbcore: registered new interface driver