Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
It seems to be working here fine !! :-) A big thank for you (both)! I will open a new thread with another question (wishlist feature) ... On Mon, Feb 21, 2011 at 11:55 PM, Henrik Sandklef h...@gnu.org wrote: Thanks a lot :) The dirs on the Xnee build site is almost empty since a major reconstruction (including Xnee live[2])is going on. But some last night things are found on the page . Here's the place for nightly dists: -- http://itupw056.itu.chalmers.se/xnee/nightly-dists/ I just checked this one: -- http://itupw056.itu.chalmers.se/xnee/nightly-dists/xnee-cvs-20110221.tar.gz . and it seems to be working fine[3]. Regards, henrik NOTE: When recording multiple devices on one display and replay to another display while using XI (and not core devices) Xnee has no good way of finding which recorded device id belongs to which replayed device id. Basically Xnee uses the same id as xinput --list spits out when recording and tries to find it when replaying. Perhaps Xnee will use the strings AND id in the future... let's see about that... at least you know now. [1] http://itupw056.itu.chalmers.se/xnee/ [2] http://itupw056.itu.chalmers.se/xnee-live/ [3] Here's how I tested the version above Record local display - ./cnee/src/cnee --record --mouse --keyboard -o testme.xns -sk q # stop recording by pressing q Replay to local display - ./cnee/src/cnee --replay -f testme.xns Replay to local display (and forcing core device event) - ./cnee/src/cnee --replay -f testme.xns -fcr Record Xephyr display (:3) - ./cnee/src/cnee --record --mouse --keyboard -o testme.xns -sk q --display :3 --time 3 Replay to Xephyr display (:3) - ./cnee/src/cnee --replay -f testme.xns --display :3 --time 3 Replay to Xephyr display (:3) (and forcing core device event) - ./cnee/src/cnee --replay -f testme.xns --display :3 --time 3 -fcr On 02/20/2011 11:17 AM, Javier Barroso wrote: Of course! I can, tell me when test version is available Thank you very much! On Sun, Feb 20, 2011 at 12:50 AM, Henrik Sandklef h...@gnu.org wrote: I think the bug is fixed now. Not in CVS yet. Javier, if I make a non official release can you test it? /hesa On 02/18/2011 11:48 PM, Javier Barroso wrote: With --disable-xinput-events, I don't get segmentation fault, but I cannot record and replay inside xephyr. I'm missing some parameter more ? Recording: cnee --store-mouse-position --record -o prueba.xns --keyboard --mouse --time 5 --seconds-to-record 10 --display :1 --disable-xinput-events Replaying: cnee --replay -f prueba.xns --time 5 --display :1 --disable-xinput-events Vicent, as we are talking here about a version which is not packaged, please tell me stop ccing bug report if you think doing that is wrong (I'm not sure this is fine) Thank you! On Fri, Feb 18, 2011 at 8:26 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, Is there any workaround in squeeze where we have 3.06 ... or should I compile (or make a backport) 3.08 and cnee has not got such parameter (--disable-xinput-events), I'm ccing debian bug tracker to let now about that workaround) In squeeze this segmentation fault is says: Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) ./prueba_nodo: línea 49: 26313 Violación de segmento cnee --replay -f prueba.xns --display :1 Thank you! On Fri, Feb 18, 2011 at 12:01 AM, Javier Barroso javibarr...@gmail.com wrote: Thank you very much for the workaround, I will test it! Sorry breaking this thread, I was not subscribed to the list (I'm waiting now email instruction) xnee developer wrote: Hello, Do you need the support for multiple devices? If not, try this option: --disable-xinput-events This does not solve the problem, but may be a nice workaround until the bug is fixed. /h On Tue, Feb 15, 2011 at 12:09 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, I'm running lastest debian sid, and I can't get cnee working togheter with Xephyr I found two post related, one says it won't work, and other which say that i would work Doesn't work (waste time): http://lists.gnu.org/archive/html/xnee-devel/2006-01/msg00010.html Works: http://lists.gnu.org/archive/html/info-xnee/2007-07/msg1.html I reported my issue in debian bug tracker [1] Resuming the bug report: This seems to works: cnee --store-mouse-position --record --mouse --keyboard --seconds-to-record 10 --display :1 -o prueba.xns -time 5 WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty
Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
On 02/22/2011 07:32 PM, Javier Barroso wrote: It seems to be working here fine !! :-) Cool, excellent. Thanks a lot. Ill start working on 3.09 right away. It'll be out before this weekend, so there's no need to pack 3.08. A big thank for you (both)! Thank you... I will open a new thread with another question (wishlist feature) ... Do you want more Xnee features? If so, we're all ears. But there are some tasks and bugs (for Fedora and for Nixos) that need attention before that. /hesa -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
Thanks a lot :) The dirs on the Xnee build site is almost empty since a major reconstruction (including Xnee live[2])is going on. But some last night things are found on the page . Here's the place for nightly dists: -- http://itupw056.itu.chalmers.se/xnee/nightly-dists/ I just checked this one: -- http://itupw056.itu.chalmers.se/xnee/nightly-dists/xnee-cvs-20110221.tar.gz . and it seems to be working fine[3]. Regards, henrik NOTE: When recording multiple devices on one display and replay to another display while using XI (and not core devices) Xnee has no good way of finding which recorded device id belongs to which replayed device id. Basically Xnee uses the same id as xinput --list spits out when recording and tries to find it when replaying. Perhaps Xnee will use the strings AND id in the future... let's see about that... at least you know now. [1] http://itupw056.itu.chalmers.se/xnee/ [2] http://itupw056.itu.chalmers.se/xnee-live/ [3] Here's how I tested the version above Record local display - ./cnee/src/cnee --record --mouse --keyboard -o testme.xns -sk q # stop recording by pressing q Replay to local display - ./cnee/src/cnee --replay -f testme.xns Replay to local display (and forcing core device event) - ./cnee/src/cnee --replay -f testme.xns -fcr Record Xephyr display (:3) - ./cnee/src/cnee --record --mouse --keyboard -o testme.xns -sk q --display :3 --time 3 Replay to Xephyr display (:3) - ./cnee/src/cnee --replay -f testme.xns --display :3 --time 3 Replay to Xephyr display (:3) (and forcing core device event) - ./cnee/src/cnee --replay -f testme.xns --display :3 --time 3 -fcr On 02/20/2011 11:17 AM, Javier Barroso wrote: Of course! I can, tell me when test version is available Thank you very much! On Sun, Feb 20, 2011 at 12:50 AM, Henrik Sandklef h...@gnu.org wrote: I think the bug is fixed now. Not in CVS yet. Javier, if I make a non official release can you test it? /hesa On 02/18/2011 11:48 PM, Javier Barroso wrote: With --disable-xinput-events, I don't get segmentation fault, but I cannot record and replay inside xephyr. I'm missing some parameter more ? Recording: cnee --store-mouse-position --record -o prueba.xns --keyboard --mouse --time 5 --seconds-to-record 10 --display :1 --disable-xinput-events Replaying: cnee --replay -f prueba.xns --time 5 --display :1 --disable-xinput-events Vicent, as we are talking here about a version which is not packaged, please tell me stop ccing bug report if you think doing that is wrong (I'm not sure this is fine) Thank you! On Fri, Feb 18, 2011 at 8:26 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, Is there any workaround in squeeze where we have 3.06 ... or should I compile (or make a backport) 3.08 and cnee has not got such parameter (--disable-xinput-events), I'm ccing debian bug tracker to let now about that workaround) In squeeze this segmentation fault is says: Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) ./prueba_nodo: línea 49: 26313 Violación de segmento cnee --replay -f prueba.xns --display :1 Thank you! On Fri, Feb 18, 2011 at 12:01 AM, Javier Barroso javibarr...@gmail.com wrote: Thank you very much for the workaround, I will test it! Sorry breaking this thread, I was not subscribed to the list (I'm waiting now email instruction) xnee developer wrote: Hello, Do you need the support for multiple devices? If not, try this option: --disable-xinput-events This does not solve the problem, but may be a nice workaround until the bug is fixed. /h On Tue, Feb 15, 2011 at 12:09 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, I'm running lastest debian sid, and I can't get cnee working togheter with Xephyr I found two post related, one says it won't work, and other which say that i would work Doesn't work (waste time): http://lists.gnu.org/archive/html/xnee-devel/2006-01/msg00010.html Works: http://lists.gnu.org/archive/html/info-xnee/2007-07/msg1.html I reported my issue in debian bug tracker [1] Resuming the bug report: This seems to works: cnee --store-mouse-position --record --mouse --keyboard --seconds-to-record 10 --display :1 -o prueba.xns -time 5 WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty But replay don't work (having Xephyr listenning on :1) : cnee --replay --time 5 --display :1 -f prueba.xns Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation
Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
Of course! I can, tell me when test version is available Thank you very much! On Sun, Feb 20, 2011 at 12:50 AM, Henrik Sandklef h...@gnu.org wrote: I think the bug is fixed now. Not in CVS yet. Javier, if I make a non official release can you test it? /hesa On 02/18/2011 11:48 PM, Javier Barroso wrote: With --disable-xinput-events, I don't get segmentation fault, but I cannot record and replay inside xephyr. I'm missing some parameter more ? Recording: cnee --store-mouse-position --record -o prueba.xns --keyboard --mouse --time 5 --seconds-to-record 10 --display :1 --disable-xinput-events Replaying: cnee --replay -f prueba.xns --time 5 --display :1 --disable-xinput-events Vicent, as we are talking here about a version which is not packaged, please tell me stop ccing bug report if you think doing that is wrong (I'm not sure this is fine) Thank you! On Fri, Feb 18, 2011 at 8:26 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, Is there any workaround in squeeze where we have 3.06 ... or should I compile (or make a backport) 3.08 and cnee has not got such parameter (--disable-xinput-events), I'm ccing debian bug tracker to let now about that workaround) In squeeze this segmentation fault is says: Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) ./prueba_nodo: línea 49: 26313 Violación de segmento cnee --replay -f prueba.xns --display :1 Thank you! On Fri, Feb 18, 2011 at 12:01 AM, Javier Barroso javibarr...@gmail.com wrote: Thank you very much for the workaround, I will test it! Sorry breaking this thread, I was not subscribed to the list (I'm waiting now email instruction) xnee developer wrote: Hello, Do you need the support for multiple devices? If not, try this option: --disable-xinput-events This does not solve the problem, but may be a nice workaround until the bug is fixed. /h On Tue, Feb 15, 2011 at 12:09 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, I'm running lastest debian sid, and I can't get cnee working togheter with Xephyr I found two post related, one says it won't work, and other which say that i would work Doesn't work (waste time): http://lists.gnu.org/archive/html/xnee-devel/2006-01/msg00010.html Works: http://lists.gnu.org/archive/html/info-xnee/2007-07/msg1.html I reported my issue in debian bug tracker [1] Resuming the bug report: This seems to works: cnee --store-mouse-position --record --mouse --keyboard --seconds-to-record 10 --display :1 -o prueba.xns -time 5 WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty But replay don't work (having Xephyr listenning on :1) : cnee --replay --time 5 --display :1 -f prueba.xns Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) Violación de segmento I read the manual, but I couldn't find how to fix this issue. Are this upgrade the cause, or I'm doing something different ? :( If I replay in the same display, it works (but I can't get my work done :( ) Do you have any tip solving this issue ? (where can I read in the manual about it) Thank you very much ! [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613237 ___ Xnee-devel mailing list xnee-de...@gnu.org http://lists.gnu.org/mailman/listinfo/xnee-devel -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
Your args look ok, guess it all points at Xnee at the moment. Will check asap. Thanks for your efforts :) /h On 02/18/2011 11:48 PM, Javier Barroso wrote: With --disable-xinput-events, I don't get segmentation fault, but I cannot record and replay inside xephyr. I'm missing some parameter more ? Recording: cnee --store-mouse-position --record -o prueba.xns --keyboard --mouse --time 5 --seconds-to-record 10 --display :1 --disable-xinput-events Replaying: cnee --replay -f prueba.xns --time 5 --display :1 --disable-xinput-events Vicent, as we are talking here about a version which is not packaged, please tell me stop ccing bug report if you think doing that is wrong (I'm not sure this is fine) Thank you! On Fri, Feb 18, 2011 at 8:26 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, Is there any workaround in squeeze where we have 3.06 ... or should I compile (or make a backport) 3.08 and cnee has not got such parameter (--disable-xinput-events), I'm ccing debian bug tracker to let now about that workaround) In squeeze this segmentation fault is says: Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) ./prueba_nodo: línea 49: 26313 Violación de segmento cnee --replay -f prueba.xns --display :1 Thank you! On Fri, Feb 18, 2011 at 12:01 AM, Javier Barroso javibarr...@gmail.com wrote: Thank you very much for the workaround, I will test it! Sorry breaking this thread, I was not subscribed to the list (I'm waiting now email instruction) xnee developer wrote: Hello, Do you need the support for multiple devices? If not, try this option: --disable-xinput-events This does not solve the problem, but may be a nice workaround until the bug is fixed. /h On Tue, Feb 15, 2011 at 12:09 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, I'm running lastest debian sid, and I can't get cnee working togheter with Xephyr I found two post related, one says it won't work, and other which say that i would work Doesn't work (waste time): http://lists.gnu.org/archive/html/xnee-devel/2006-01/msg00010.html Works: http://lists.gnu.org/archive/html/info-xnee/2007-07/msg1.html I reported my issue in debian bug tracker [1] Resuming the bug report: This seems to works: cnee --store-mouse-position --record --mouse --keyboard --seconds-to-record 10 --display :1 -o prueba.xns -time 5 WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty But replay don't work (having Xephyr listenning on :1) : cnee --replay --time 5 --display :1 -f prueba.xns Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) Violación de segmento I read the manual, but I couldn't find how to fix this issue. Are this upgrade the cause, or I'm doing something different ? :( If I replay in the same display, it works (but I can't get my work done :( ) Do you have any tip solving this issue ? (where can I read in the manual about it) Thank you very much ! [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613237 ___ Xnee-devel mailing list xnee-de...@gnu.org http://lists.gnu.org/mailman/listinfo/xnee-devel -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
Hi again Javier If synchronisation fails during replay ... try this option: --no-synchronise (-ns) This turns off sycnhrosation (only valid during replay) during replay. /h On 02/18/2011 11:48 PM, Javier Barroso wrote: With --disable-xinput-events, I don't get segmentation fault, but I cannot record and replay inside xephyr. I'm missing some parameter more ? Recording: cnee --store-mouse-position --record -o prueba.xns --keyboard --mouse --time 5 --seconds-to-record 10 --display :1 --disable-xinput-events Replaying: cnee --replay -f prueba.xns --time 5 --display :1 --disable-xinput-events Vicent, as we are talking here about a version which is not packaged, please tell me stop ccing bug report if you think doing that is wrong (I'm not sure this is fine) Thank you! On Fri, Feb 18, 2011 at 8:26 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, Is there any workaround in squeeze where we have 3.06 ... or should I compile (or make a backport) 3.08 and cnee has not got such parameter (--disable-xinput-events), I'm ccing debian bug tracker to let now about that workaround) In squeeze this segmentation fault is says: Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) ./prueba_nodo: línea 49: 26313 Violación de segmento cnee --replay -f prueba.xns --display :1 Thank you! On Fri, Feb 18, 2011 at 12:01 AM, Javier Barroso javibarr...@gmail.com wrote: Thank you very much for the workaround, I will test it! Sorry breaking this thread, I was not subscribed to the list (I'm waiting now email instruction) xnee developer wrote: Hello, Do you need the support for multiple devices? If not, try this option: --disable-xinput-events This does not solve the problem, but may be a nice workaround until the bug is fixed. /h On Tue, Feb 15, 2011 at 12:09 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, I'm running lastest debian sid, and I can't get cnee working togheter with Xephyr I found two post related, one says it won't work, and other which say that i would work Doesn't work (waste time): http://lists.gnu.org/archive/html/xnee-devel/2006-01/msg00010.html Works: http://lists.gnu.org/archive/html/info-xnee/2007-07/msg1.html I reported my issue in debian bug tracker [1] Resuming the bug report: This seems to works: cnee --store-mouse-position --record --mouse --keyboard --seconds-to-record 10 --display :1 -o prueba.xns -time 5 WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty But replay don't work (having Xephyr listenning on :1) : cnee --replay --time 5 --display :1 -f prueba.xns Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) Violación de segmento I read the manual, but I couldn't find how to fix this issue. Are this upgrade the cause, or I'm doing something different ? :( If I replay in the same display, it works (but I can't get my work done :( ) Do you have any tip solving this issue ? (where can I read in the manual about it) Thank you very much ! [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613237 ___ Xnee-devel mailing list xnee-de...@gnu.org http://lists.gnu.org/mailman/listinfo/xnee-devel -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#613237: [Xnee-devel] Re: cnee loves Xephyr ?
I think the bug is fixed now. Not in CVS yet. Javier, if I make a non official release can you test it? /hesa On 02/18/2011 11:48 PM, Javier Barroso wrote: With --disable-xinput-events, I don't get segmentation fault, but I cannot record and replay inside xephyr. I'm missing some parameter more ? Recording: cnee --store-mouse-position --record -o prueba.xns --keyboard --mouse --time 5 --seconds-to-record 10 --display :1 --disable-xinput-events Replaying: cnee --replay -f prueba.xns --time 5 --display :1 --disable-xinput-events Vicent, as we are talking here about a version which is not packaged, please tell me stop ccing bug report if you think doing that is wrong (I'm not sure this is fine) Thank you! On Fri, Feb 18, 2011 at 8:26 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, Is there any workaround in squeeze where we have 3.06 ... or should I compile (or make a backport) 3.08 and cnee has not got such parameter (--disable-xinput-events), I'm ccing debian bug tracker to let now about that workaround) In squeeze this segmentation fault is says: Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) ./prueba_nodo: línea 49: 26313 Violación de segmento cnee --replay -f prueba.xns --display :1 Thank you! On Fri, Feb 18, 2011 at 12:01 AM, Javier Barroso javibarr...@gmail.com wrote: Thank you very much for the workaround, I will test it! Sorry breaking this thread, I was not subscribed to the list (I'm waiting now email instruction) xnee developer wrote: Hello, Do you need the support for multiple devices? If not, try this option: --disable-xinput-events This does not solve the problem, but may be a nice workaround until the bug is fixed. /h On Tue, Feb 15, 2011 at 12:09 AM, Javier Barroso javibarr...@gmail.com wrote: Hi, I'm running lastest debian sid, and I can't get cnee working togheter with Xephyr I found two post related, one says it won't work, and other which say that i would work Doesn't work (waste time): http://lists.gnu.org/archive/html/xnee-devel/2006-01/msg00010.html Works: http://lists.gnu.org/archive/html/info-xnee/2007-07/msg1.html I reported my issue in debian bug tracker [1] Resuming the bug report: This seems to works: cnee --store-mouse-position --record --mouse --keyboard --seconds-to-record 10 --display :1 -o prueba.xns -time 5 WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty WARNING: Number of valuators was faulty But replay don't work (having Xephyr listenning on :1) : cnee --replay --time 5 --display :1 -f prueba.xns Can't synchronize anymore have to leave! 11 10 Error number: 5 Error: Synchronisation failure Solution: For more information on this error, please read the manual(s) Violación de segmento I read the manual, but I couldn't find how to fix this issue. Are this upgrade the cause, or I'm doing something different ? :( If I replay in the same display, it works (but I can't get my work done :( ) Do you have any tip solving this issue ? (where can I read in the manual about it) Thank you very much ! [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=613237 ___ Xnee-devel mailing list xnee-de...@gnu.org http://lists.gnu.org/mailman/listinfo/xnee-devel -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org