Hello,
On Mon, 02 Feb 2015 17:04:20 -0800 Nick Seth-Smith n...@seth-smith.com wrote:
Hello
I read the chain with interest since I have been fighting the same
issue on my machine. What is interesting (at least to me) is that I
am running a much older release of Ubuntu Lucid with a
Hello
I read the chain with interest since I have been fighting the same issue on
my machine. What is interesting (at least to me) is that I am running a
much older release of Ubuntu Lucid with a 2.6.32-71 kernel. I¹m not in
the habit of rebooting very often so this issue may have existed
My root-on-lvm system has worked reliably for some time, but fails to
boot every time with kernel 3.8.
I suspect the change may be due to the removal of the scsi_wait_scan
module in 3.6. (init-top/udev waits using the module if available.)
Bug 678688 suggests a solution involving repeated calls
Hi all,
I just encountered the same bug while attempting a fresh install of jessie.
For me, the solution was to install the lvm2 package from a livecd:
- Make LVM volumes available:
$ vgchange -ay
- Mount the necessary filesystems
$ mount /dev/[...]-vg/root /mnt
$ mount -t proc none /mnt/proc
$
Al 21/10/11 04:48, En/na Jim Barber ha escrit:
I too have issues with this problem.
I was finally going to report this when I came across this bug report.
I'll try the scsi_mod.scan=sync option as maybe this won't cause unnecessary
delays?
Francesc, maybe try 'dpkg-reconfigure grub-pc'
I too have issues with this problem.
For all of our Dell PowerEdge servers I've needed to use the rootdelay
parameter.
Ages ago I used to have it set to rootdelay=10
Then a number of months ago after some upgrades the failure was happening again.
I had to bump it up to rootdelay=20
Today I
Hi. I too stumbled with this bug. In my experience I have to
manually type vgchange -a y every time it boots. Then CTRl-D.
I tried adding the suggestions to grub, but it didn't work.
Maybe I just missed something ?
I modified:
/etc/default/grub
and added this:
severity 616689 important
thanks
I'm confirming this bug, and raising the severity to important.
Jcristau and I have just finished upgrading a very old server from
oldstable to stable. We were hoping to be able to perform the upgrade
over ssh. We ended up having to go on-site, and spent the
Package: initramfs-tools
Version: 0.98.8
Severity: normal
Hello,
On my box (Sunblade 1000) the LVM initialization does not happen fast
enough, so mounting root filesystem fails in roughly 95% of the cases:
[ 90.520448] qla2xxx 0001:00:04.0: Allocated (252 KB) for firmware
dump...
[
9 matches
Mail list logo
