Package: mount Version: 2.17.2-9 Severity: important I have an external USB hard disk. This is the dmesg output when the drive is attached to my notebook:
[ 1178.268720] reportbug[2649]: segfault at d74 ip b7853a80 sp bfcdbcc0 error 4 in ld-2.11.2.so[b7842000+1b000] [ 1243.112109] usb 1-6: USB disconnect, address 4 [ 1560.933139] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 1561.065525] usb 1-6: New USB device found, idVendor=1058, idProduct=0740 [ 1561.065533] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 1561.065539] usb 1-6: Product: My Passport 0740 [ 1561.065543] usb 1-6: Manufacturer: Western Digital [ 1561.065548] usb 1-6: SerialNumber: 575839314137315534393038 [ 1561.065749] usb 1-6: configuration #1 chosen from 1 choice [ 1561.066449] scsi3 : SCSI emulation for USB Mass Storage devices [ 1561.066742] usb-storage: device found at 5 [ 1561.066746] usb-storage: waiting for device to settle before scanning [ 1566.064442] usb-storage: device scan complete [ 1566.064960] scsi 3:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 1566.065704] scsi 3:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 1566.066792] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1566.066940] ses 3:0:0:1: Attached Enclosure device [ 1566.067040] ses 3:0:0:1: Attached scsi generic sg3 type 13 [ 1566.256922] sd 3:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 1566.258660] sd 3:0:0:0: [sdb] Write Protect is off [ 1566.258667] sd 3:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 1566.258673] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1566.261914] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1566.261922] sdb: sdb1 sdb2 [ 1566.282548] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1566.282557] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1567.075556] kjournald starting. Commit interval 5 seconds [ 1567.075581] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 1567.076300] EXT3 FS on sdb2, internal journal [ 1567.076309] EXT3-fs: mounted filesystem with ordered data mode. On this drive I have two partitions. The first is EXT3-formatted and it's labeled "backup" while the second one is FAT32-formatted for Windows compatibility and it's labeled "My Passport": root@produzione:/home/daniele# fdisk -l /dev/sdb Disk /dev/sdb: 500.1 GB, 500074283008 bytes 255 heads, 63 sectors/track, 60797 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00038a56 Device Boot Start End Blocks Id System /dev/sdb1 1 30521 245152768 7 HPFS/NTFS /dev/sdb2 30521 60798 243200000 83 Linux I can use them without problems but sometimes when I umount them hitting the "Safely Remove Drive" option in the right-click menu on the drive icons, the system completly crashes. The screen turns black and all is freezed. The only option I have is to reboot my notebook. This is my /etc/fstab: root@produzione:/home/daniele# cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/mapper/volumegrp01-rootfs / ext3 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=7279adbc-99e1-432b-870a-df13f13957b0 /boot ext3 defaults 0 2 /dev/mapper/volumegrp01-home /home ext3 defaults,user_xattr 0 2 /dev/mapper/volumegrp01-swap none swap sw 0 0 UUID=9812-0845 /media/usb0 vfat,iso9660 user,noauto 0 0 #UUID=9C64D17064D14DA0 /media/ntfs ntfs /dev/scd0 /media/cdrom1 udf,iso9660 user,noauto 0 0 I was forced to manually modify it in order to fix some mounting problems I had. In particular, the system was not able to auto mount my usb pen drive so I put its UUID in fstab to fix this issue. Now the output of blkid: root@produzione:/home/daniele# blkid /dev/sda5: UUID="cf301262-9b5a-40ca-89c4-bc92f2b8a393" TYPE="crypto_LUKS" /dev/sda1: UUID="7279adbc-99e1-432b-870a-df13f13957b0" TYPE="ext3" SEC_TYPE="ext2" /dev/mapper/sda5_crypt: UUID="S06RiO-pShS-YJok-TS7I-ViRA-YTGT-K66fV2" TYPE="LVM2_member" /dev/mapper/volumegrp01-swap: UUID="73f27b9c-341e-4834-aa74-4c591b9b332a" TYPE="swap" /dev/mapper/volumegrp01-rootfs: UUID="906dc4bf-08c4-4fb8-ba04-6a612c850281" TYPE="ext3" /dev/mapper/volumegrp01-home: UUID="165100d7-91ba-4f06-9f14-b5174254f8e3" TYPE="ext3" SEC_TYPE="ext2" /dev/sdb1: LABEL="My Passport" UUID="9C64D17064D14DA0" TYPE="ntfs" /dev/sdb2: LABEL="Backup" UUID="caaf4f6e-d2a8-4765-8fe1-885cd90892a2" TYPE="ext3" root@produzione:/home/daniele# I don't know if this is useful but my disk is almost completly ciphered, except the boot partition. On top of that I have an LVM setup for swap, home and root file system. In summary: root@produzione:/home/daniele# fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000367c5 Device Boot Start End Blocks Id System /dev/sda1 1 61 487424 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 61 14594 116730881 5 Extended /dev/sda5 61 14594 116730880 83 Linux Disk /dev/dm-0: 119.5 GB, 119531368448 bytes 255 heads, 63 sectors/track, 14532 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 4093 MB, 4093640704 bytes 255 heads, 63 sectors/track, 497 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table Disk /dev/dm-2: 30.0 GB, 29997662208 bytes 255 heads, 63 sectors/track, 3647 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-2 doesn't contain a valid partition table Disk /dev/dm-3: 85.4 GB, 85437972480 bytes 255 heads, 63 sectors/track, 10387 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-3 doesn't contain a valid partition table And root@produzione:/home/daniele# pvdisplay --- Physical volume --- PV Name /dev/dm-0 VG Name volumegrp01 PV Size 111.32 GiB / not usable 2.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 28498 Free PE 0 Allocated PE 28498 PV UUID S06RiO-pShS-YJok-TS7I-ViRA-YTGT-K66fV2 root@produzione:/home/daniele# root@produzione:/home/daniele# root@produzione:/home/daniele# root@produzione:/home/daniele# vgdisplay --- Volume group --- VG Name volumegrp01 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 3 Max PV 0 Cur PV 1 Act PV 1 VG Size 111.32 GiB PE Size 4.00 MiB Total PE 28498 Alloc PE / Size 28498 / 111.32 GiB Free PE / Size 0 / 0 VG UUID 0D4IQR-269Y-2y0k-uGKR-wHRg-WiSJ-K1UWpS root@produzione:/home/daniele# root@produzione:/home/daniele# lvdisplay --- Logical volume --- LV Name /dev/volumegrp01/swap VG Name volumegrp01 LV UUID Upx9gn-pjSc-vxKz-twaq-jzOG-GBT8-3XoVnS LV Write Access read/write LV Status available # open 1 LV Size 3.81 GiB Current LE 976 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:1 --- Logical volume --- LV Name /dev/volumegrp01/rootfs VG Name volumegrp01 LV UUID HBW0lc-JDcw-QhA3-fCFW-d0P4-ZOgy-ZZJ3M2 LV Write Access read/write LV Status available # open 1 LV Size 27.94 GiB Current LE 7152 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:2 --- Logical volume --- LV Name /dev/volumegrp01/home VG Name volumegrp01 LV UUID wbCzrf-cSrE-xy3I-KtfI-m06J-QkuR-E4WYHo LV Write Access read/write LV Status available # open 1 LV Size 79.57 GiB Current LE 20370 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:3 root@produzione:/home/daniele# Thank you in advance, Daniele Visaggio -- System Information: Debian Release: 6.0.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages mount depends on: ii libblkid1 2.17.2-9 block device id library ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libselinux1 2.0.96-1 SELinux runtime shared libraries ii libsepol1 2.0.41-1 SELinux library for manipulating b ii libuuid1 2.17.2-9 Universally Unique ID library mount recommends no packages. Versions of packages mount suggests: ii nfs-common 1:1.2.2-4 NFS support files common to client -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
