Package: src:linux
Version: 3.16.51-3+deb8u1
Severity: normal

Dear Maintainer,

Since upgrading 3.16.43-2+deb8u5 to 3.16.51-3+deb8u1, i915 graphics
acceleration is sometimes unavailable.

It seems to be broken about 50% of the time on a cold boot.  I have
not seen the problem occur after a reboot.

The X driver (xserver-xorg-video-intel) states "cannot enable DRI2
whilst forcing software fallbacks", but doesn't give any indication of
why software fallback mode is forced.  glxinfo reports that llvmpipe
is in use.  xvinfo reports the same capabilities as normal, but they
don't work (e.g., mpv --vo=xv shows a black screen.)

The following messages appear in dmesg:

    [drm] GPU HANG: ecode -1:0x00000000, reason: Command parser error, iir 
0x00008000, action: continue
    [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, 
including userspace.
    [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> 
DRM/Intel
    [drm] drm/i915 developers can then reassign to the right component if it's 
not a kernel issue.
    [drm] The gpu crash dump is required to analyze gpu hangs, so please always 
attach it.
    [drm] GPU crash dump saved to /sys/class/drm/card0/error
    i915: render error detected, EIR: 0x00000010
    i915:   IPEIR: 0x00000000
    i915:   IPEHR: 0x00000000
    i915:   INSTDONE_0: 0xfffffffe
    i915:   INSTDONE_1: 0xffffffff
    i915:   INSTDONE_2: 0x00000000
    i915:   INSTDONE_3: 0x00000000
    i915:   INSTPS: 0x00000000
    i915:   ACTHD: 0x00000000
    i915: page table error
    i915:   PGTBL_ER: 0x00000003
    [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
    ...
    [drm:init_ring_common] *ERROR* render ring initialization failed ctl 
0001f001 (valid? 1) head 18000208 tail 00000000 start 003eb000 [expected 
003eb000]
    [drm:i915_gem_init] *ERROR* Failed to initialize GPU, declaring it wedged
    [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

The system is a Thinkpad X200 with libreboot.


-- Package-specific info:
** Version:
Linux version 3.16.0-5-amd64 (debian-ker...@lists.debian.org) (gcc version 
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08)

** Command line:
BOOT_IMAGE=/vmlinuz root=UUID=d4a95191-90d7-4f4a-9504-b1254cb12617 ro quiet 
panic=5

** Tainted: CIO (7168)
 * Module from drivers/staging has been loaded.
 * Working around severe firmware bug.
 * Out-of-tree module has been loaded.

** Kernel log:
[   11.276033] [drm:init_ring_common] *ERROR* render ring initialization failed 
ctl 0001f001 (valid? 1) head 18000208 tail 00000000 start 003eb000 [expected 
003eb000]
[   11.276045] [drm:i915_gem_init] *ERROR* Failed to initialize GPU, declaring 
it wedged
[   11.361171] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 
00 64
[   11.454553] fbcon: inteldrmfb (fb0) is primary device
[   11.632038] usb 1-6: new high-speed USB device number 4 using ehci-pci
[   11.668130] Console: switching to colour frame buffer device 160x50
[   11.670763] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.670766] i915 0000:00:02.0: registered panic notifier
[   11.684059] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   11.716149] EXT4-fs (sda1): mounting ext3 file system using the ext4 
subsystem
[   11.734179] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, 
buttons: 3/3
[   11.738188] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
(null)
[   11.752698] input: TPPS/2 IBM TrackPoint as 
/devices/platform/i8042/serio1/input/input7
[   11.769497] usb 1-6: New USB device found, idVendor=17ef, idProduct=480c
[   11.769501] usb 1-6: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[   11.769504] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[   12.012035] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[   12.184247] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
[   12.184252] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   12.184254] usb 4-1: Product: Fingerprint Sensor
[   12.342396] cfg80211: World regulatory domain updated:
[   12.342401] cfg80211:  DFS Master region: unset
[   12.342403] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.342406] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 
mBm), (N/A)
[   12.342408] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz 
AUTO), (N/A, 2000 mBm), (N/A)
[   12.342410] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 
mBm), (N/A)
[   12.342412] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2000 mBm), (N/A)
[   12.342415] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2000 mBm), (0 s)
[   12.342417] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 
mBm), (0 s)
[   12.342419] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 
mBm), (N/A)
[   12.342421] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 
mBm), (N/A)
[   12.420187] systemd-udevd[272]: renamed network interface eth0 to eth1
[   12.424030] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[   12.455950] iTCO_vendor_support: vendor-support=0
[   12.456769] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.456815] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0660)
[   12.457670] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.480276] cfg80211: Calling CRDA for country: US
[   12.595245] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[   12.595249] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.595252] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[   12.595254] usb 4-2: Manufacturer: Lenovo Computer Corp
[   12.975125] cfg80211: Regulatory domain changed to country: US
[   12.975130] cfg80211:  DFS Master region: FCC
[   12.975131] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.975134] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 
mBm), (N/A)
[   12.975137] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2300 mBm), (N/A)
[   12.975139] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2300 mBm), (0 s)
[   12.975142] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 
mBm), (0 s)
[   12.975144] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 
mBm), (N/A)
[   12.975146] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 
4000 mBm), (N/A)
[   13.543403] media: Linux media interface: v0.10
[   13.549176] Linux video capture interface: v2.00
[   13.557528] uvcvideo: Found UVC 1.00 device <unnamed> (17ef:480c)
[   13.561634] input: UVC Camera (17ef:480c) as 
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14
[   13.564333] usbcore: registered new interface driver uvcvideo
[   13.564336] USB Video Class driver (1.1.1)
[   13.616537] Bluetooth: Core ver 2.19
[   13.616567] NET: Registered protocol family 31
[   13.616568] Bluetooth: HCI device and connection manager initialized
[   13.616626] Bluetooth: HCI socket layer initialized
[   13.616629] Bluetooth: L2CAP socket layer initialized
[   13.616641] Bluetooth: SCO socket layer initialized
[   13.716365] usbcore: registered new interface driver btusb
[   13.846221] IPMI System Interface driver.
[   13.846294] ipmi_si: Unable to find any System Interface(s)
[   17.575651] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: 
(null)
[   17.598394] systemd-journald[222]: Received request to flush runtime journal 
from PID 1
[   18.106626] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.106627] Bluetooth: BNEP filters: protocol multicast
[   18.106635] Bluetooth: BNEP socket layer initialized
[   18.556367] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[   18.660385] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[   18.660507] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   18.677259] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.435006] wlan0: authenticate with c0:56:27:09:d3:bd
[   19.441473] wlan0: send auth to c0:56:27:09:d3:bd (try 1/3)
[   19.443101] wlan0: authenticated
[   19.443282] ath9k 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   19.444326] wlan0: associate with c0:56:27:09:d3:bd (try 1/3)
[   19.448146] wlan0: RX AssocResp from c0:56:27:09:d3:bd (capab=0x431 status=0 
aid=2)
[   19.448197] wlan0: associated
[   19.448685] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.448736] cfg80211: Calling CRDA for country: US
[   19.452883] ath: EEPROM regdomain: 0x8348
[   19.452886] ath: EEPROM indicates we should expect a country code
[   19.452888] ath: doing EEPROM country->regdmn map search
[   19.452889] ath: country maps to regdmn code: 0x3a
[   19.452891] ath: Country alpha2 being used: US
[   19.452892] ath: Regpair used: 0x3a
[   19.452893] ath: regdomain 0x8348 dynamically updated by country IE
[   19.452920] cfg80211: Regulatory domain changed to country: US
[   19.452922] cfg80211:  DFS Master region: FCC
[   19.452923] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp), (dfs_cac_time)
[   19.452926] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 
mBm), (N/A)
[   19.452928] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2300 mBm), (N/A)
[   19.452930] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz 
AUTO), (N/A, 2300 mBm), (0 s)
[   19.452933] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 
mBm), (0 s)
[   19.452935] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 
mBm), (N/A)
[   19.452937] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 
4000 mBm), (N/A)

** Model information
sys_vendor: LENOVO
product_name: 7459M78
product_version: ThinkPad X200
chassis_vendor: LENOVO
chassis_version: 
bios_vendor: coreboot
bios_version: CBET4000 4.0
board_vendor: LENOVO
board_name: 7459M78
board_version: ThinkPad X200

** Loaded modules:
acpi_call(O)
bnep
ecb
btusb
bluetooth
6lowpan_iphc
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
iTCO_wdt
iTCO_vendor_support
snd_hda_codec_conexant
snd_hda_codec_generic
arc4
ath9k
ath9k_common
ath9k_hw
ath
coretemp
mac80211
kvm_intel
kvm
i915
cfg80211
thinkpad_acpi
psmouse
lpc_ich
sg
nvram
pcspkr
i2c_i801
mfd_core
snd_hda_intel
rfkill
e1000e
drm_kms_helper
drm
snd_hda_controller
battery
uhci_hcd
snd_hda_codec
ehci_pci
snd_hwdep
ehci_hcd
snd_pcm
i2c_algo_bit
snd_timer
i2c_core
snd
usbcore
ac
soundcore
ptp
pps_core
video
shpchp
usb_common
button
acpi_cpufreq
processor
ipmi_watchdog
ipmi_poweroff
ipmi_devintf
ipmi_msghandler
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
xts
gf128mul
dm_crypt
aufs(C)
sha256_ssse3
sha256_generic
dm_verity
dm_bufio
dm_mod
loop
algif_skcipher
af_alg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
evdev
ahci
libahci
serio_raw
libata
scsi_mod
thermal
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory 
Controller Hub [8086:2a40] (rev 07)
        Subsystem: Lenovo Device [17aa:20e0]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series 
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA 
controller])
        Subsystem: Lenovo Device [17aa:20e4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 3400 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset 
Integrated Graphics Controller [8086:2a43] (rev 07)
        Subsystem: Lenovo Device [17aa:20e4]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Region 0: Memory at e1400000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network 
Connection [8086:10f5] (rev 03)
        Subsystem: Lenovo Device [17aa:20ee]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at e1600000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at e1624000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 3000 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo Device [17aa:20f0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 3020 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo Device [17aa:20f0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 3040 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo Device [17aa:20f0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 3060 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Lenovo Device [17aa:20f1]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at e1625800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller [8086:293e] (rev 03)
        Subsystem: Lenovo Device [17aa:20f2]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at e1620000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: e1500000-e15fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: e0800000-e0ffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000e07fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo Device [17aa:20f0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 3080 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo Device [17aa:20f0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 30a0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Lenovo Device [17aa:20f0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 30c0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Lenovo Device [17aa:20f1]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at e1625c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller 
[8086:2917] (rev 03)
        Subsystem: Lenovo Device [17aa:20f5]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 
4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Lenovo Device [17aa:20f8]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 44
        Region 0: I/O ports at 3408 [size=8]
        Region 1: I/O ports at 3418 [size=4]
        Region 2: I/O ports at 3410 [size=8]
        Region 3: I/O ports at 341c [size=4]
        Region 4: I/O ports at 30e0 [size=32]
        Region 5: Memory at e1625000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller 
[8086:2930] (rev 03)
        Subsystem: Lenovo Device [17aa:20f9]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at e1626000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 0400 [size=32]

02:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network 
Adapter (PCI-Express) [168c:002b] (rev 01)
        Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or 
Half-size Mini PCIe Card [1a3b:1089]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at e1500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k


** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 17ef:480c Lenovo Integrated Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. BCM2045B (BDC-2.1) [Bluetooth 
Controller]
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 8.10
  APT prefers oldstable
  APT policy: (900, 'oldstable'), (1, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-3.16.0-5-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.56+deb8u1
ii  initramfs-tools [linux-initramfs-tool]  0.120+deb8u3
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-3.16.0-5-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3+deb8u1

Versions of packages linux-image-3.16.0-5-amd64 suggests:
pn  debian-kernel-handbook         <none>
pn  grub-pc | grub-efi | extlinux  <none>
pn  linux-doc-3.16                 <none>

Versions of packages linux-image-3.16.0-5-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information excluded

Reply via email to