Package: src:linux Version: 5.7.10-1 Severity: normal Dear Maintainer,
I installed an SD card image from https://raspi.debian.net/daily/raspi_4.img.xz to Raspberry Pi 4B 8GB (board revision 1.4). USB is unusable and "lsusb" shows nothing. Relevant dmesg is as follows: [ 3.198861] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 8.663493] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801 [ 8.663690] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x890 took 5336734 usecs [ 12.265387] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 12.268816] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 12.278041] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 12.278134] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 12.282227] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 22.320273] xhci_hcd 0000:01:00.0: can't setup: -110 [ 22.336521] xhci_hcd 0000:01:00.0: USB bus 1 deregistered [ 22.353573] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110 Best regards, Ryutaroh Matsumoto -- Package-specific info: ** Version: Linux version 5.7.0-2-arm64 (debian-ker...@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-15), GNU ld (GNU Binutils for Debian) 2.35) #1 SMP Debian 5.7.10-1 (2020-07-26) ** Command line: video=HDMI-A-1:3840x2160M@30,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x71f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty0 console=ttyS1,115200 root=/dev/mmcblk1p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait ** Tainted: C (1024) * staging driver was loaded ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information Device Tree model: Raspberry Pi 4 Model B Rev 1.4 ** Loaded modules: nls_ascii nls_cp437 vfat fat hci_uart btqca btrtl btbcm btsdio btintel bcm2835_v4l2(C) bluetooth brcmfmac brcmutil videobuf2_vmalloc videobuf2_memops snd_bcm2835(C) videobuf2_v4l2 jitterentropy_rng videobuf2_common snd_pcm drbg snd_timer videodev snd ansi_cprng cpufreq_dt cfg80211 mc soundcore ecdh_generic ecc rfkill raspberrypi_cpufreq bcm2835_wdt bcm2711_thermal pwm_bcm2835 iproc_rng200 vchiq(C) rng_core leds_gpio ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic xor xor_neon zstd_decompress zstd_compress raid6_pq libcrc32c crc32c_generic bfq broadcom bcm_phy_lib xhci_pci dwc2 xhci_hcd udc_core mdio_bcm_unimac usbcore genet sdhci_iproc of_mdio sdhci_pltfm i2c_bcm2835 fixed_phy libphy sdhci gpio_regulator usb_common phy_generic ** Network interface configuration: *** /etc/network/interfaces: # interfaces(5) file used by ifup(8) and ifdown(8) # Include files from /etc/network/interfaces.d: source-directory /etc/network/interfaces.d *** /etc/network/interfaces.d/eth0: auto eth0 # TODO: switch back to iptables-persistent once it re-enters testing iface eth0 inet dhcp # We don't currently support setup of firewalls here. # pre-up iptables-restore < /etc/iptables/rules.v4 || true # pre-up ip6tables-restore < /etc/iptables/rules.v6 || ture *** /etc/network/interfaces.d/wlan0: auto wlan0 # TODO: switch back to iptables-persistent once it re-enters testing iface wlan0 inet dhcp # We don't currently support setup of firewalls here. # pre-up iptables-restore < /etc/iptables/rules.v4 || true # pre-up ip6tables-restore < /etc/iptables/rules.v6 || ture ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff inet 192.168.1.84/24 brd 192.168.1.255 scope global dynamic wlan0 valid_lft 42924sec preferred_lft 42924sec inet6 2400:4050:2ba1:ac00:dea6:32ff:febb:99da/64 scope global dynamic mngtmpaddr valid_lft 14071sec preferred_lft 12271sec inet6 fe80::dea6:32ff:febb:99da/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wlan0: 281488 1123 0 0 0 0 0 5 127586 832 0 0 0 0 0 0 ** PCI devices: 00:00.0 PCI bridge [0604]: Broadcom Limited Device [14e4:2711] (rev 10) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: f8000000-f80fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [48] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <2us ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible+ RootCap: CRSVisible+ RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Via WAKE# ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 Len=028 <?> Capabilities: [240 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=8us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=1us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: pcieport 01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) (prog-if 30 [XHCI]) Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 40 Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [c4] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+ Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Kernel modules: xhci_pci ** USB devices: not available -- System Information: Debian Release: 10.5 APT prefers stable APT policy: (990, 'stable'), (500, 'stable-updates'), (500, 'unstable') Architecture: arm64 (aarch64) Kernel: Linux 5.7.0-2-arm64 (SMP w/4 CPU cores) Kernel taint flags: TAINT_CRAP Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-5.7.0-2-arm64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.137 ii kmod 26-1 ii linux-base 4.6 Versions of packages linux-image-5.7.0-2-arm64 recommends: ii apparmor 2.13.2-10 ii firmware-linux-free 3.4 Versions of packages linux-image-5.7.0-2-arm64 suggests: pn debian-kernel-handbook <none> pn linux-doc-5.7 <none> Versions of packages linux-image-5.7.0-2-arm64 is related to: ii firmware-amd-graphics 20200619-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20190114-2 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20200619-1 ii firmware-misc-nonfree 20200619-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
