Package: korn
Version: 4:3.5.4-1+b1
Severity: important
If the network connection between korn and the imap server is lost, then
korn freezes with a grey popup where normally the new mail would be
announced. Right clicking the number of emails to reach the settings has no
effect.
When I send
Package: myspell-nl
Version: 1:0.1e-43
Severity: minor
Thunderbird apparently only finds the Dutch dictionary if it's named nl-NL,
not nl or nl_NL...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:
Thijs Kinkhorst wrote:
tags 388411 moreinfo
thanks
Hello Bart-Jan,
Thunderbird apparently only finds the Dutch dictionary if it's named nl-NL,
not nl or nl_NL...
Thanks for your report. However, we've added that link in the -43
revision of the package, which you report you are already
Hello,
Earlier 1.4 versions didn't work at all for 7910 models (or perhaps
other Skinny phones), because Asterisk wouldn't recognize the DTMF codes
the phone was sending.
Fortunately the current versions are working fine: I can dial each
phone, and also communication with an upstream SIP
Package: asterisk
Version: 1:1.2.16~dfsg-1
Severity: important
Just installed Asterisk and am trying to get 2 Cisco 7910 phones to call
each other. So far I can call the demo setup with either phone, and if I do
a dial $number on the console, the phone does ring. But the very second I
dial either
Eric Evans wrote:
tags 422299 moreinfo
thanks
[ Bart-Jan Vrielink ]
Package: tac-plus
Version: 1:4.0.4.alpha-14+b1
Severity: important
This is what I get during a run of apt-get upgrade:
The following packages will be upgraded:
tac-plus
1 upgraded, 0 newly installed, 0 to remove
Package: tac-plus
Version: 1:4.0.4.alpha-14+b1
Severity: important
This is what I get during a run of apt-get upgrade:
The following packages will be upgraded:
tac-plus
1 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Need to get 0B/108kB of archives.
After unpacking 0B of
Tzafrir Cohen wrote:
On Thu, Mar 22, 2007 at 10:15:53PM +0100, Bart-Jan Vrielink wrote:
Package: asterisk
Version: 1:1.2.16~dfsg-1
Severity: important
Just installed Asterisk and am trying to get 2 Cisco 7910 phones to call
each other. So far I can call the demo setup with either phone
Package: firefox
Version: 1.5.dfsg+1.5.0.6-3
Severity: important
Sadly on my system X frequently crashes. After a reboot, when trying to
start Firefox again, I get a popup with Firefox is already running, but is
not responding. To open a new window, you must first close the existing
Firefox
I am closing its
bugs.
Ana
Subject:
tac-plus: Upgrade fails, falsly claims user tacacs was not created by
package
From:
Bart-Jan Vrielink [EMAIL PROTECTED]
Date:
Fri, 04 May 2007 22:17:29 +0200
To:
Debian Bug Tracking
Package: icedove
Version: 2.0.0.19-1
Severity: normal
Recently, icedove no longer remembers the Check this folder for new messages
checkbox for my IMAP folders. If I check the box, then click Ok and then
re-open the properties, the checkbox is unchecked again.
This is annoying, as I use
Package: tacacs+
Version: 4.0.4.19-6
Severity: important
Cron sent me the following mail this morning:
/etc/cron.daily/logrotate:
sh: line 1: /etc/init.d/tacacs+: No such file or directory
error: error running postrotate script for /var/log/tac_plus.acct
run-parts: /etc/cron.daily/logrotate
Hello,
I get the same errors that renders my network connection useless when
this happens. I have a Thinkpad T61 and am tracking testing.
What I can add is that this only seems to happen when connecting to my
cisco AIR-AP1121G-E-K9 accesspoint. It does not seems to occur when
using my
Package: evince
Version: 3.2.1-1
Severity: normal
Dear Maintainer,
If I click on a link pointing to a pdf in my browser (Iceweasel, 9.0.1-1
at the moment), then Evince starts embedded in my browser. Navigating
the pdf by mouse works, but Evince doesn't accept any keyboard input,
not even after
Package: iceweasel
Version: 21.0-1~bpo70+1
Severity: normal
Dear Maintainer,
When trying out the new Google Maps, which seems to rely on 3D accelerated
graphics (webgl?) I notice that the font
used is completely unreadable (it's a black bold font where the individual
letters are too close to
Package: general
Severity: normal
Dear Maintainer,
Since a couple of weeks, on my Asus Zenbook (UX32VD), running Testing, the
keyboard shortcuts for the audio volume and keyboard backlight no longer work,
and somewhere in the boot cyclus, the keyboard backlight gets disabled.
The keyboard
Gnome3
-Original message-
From:Jonathan Dowland j...@debian.org mailto:j...@debian.org
Sent: Sunday 3rd November 2013 15:44
To: Bart-Jan Vrielink bart...@vrielink.net mailto:bart...@vrielink.net ;
728...@bugs.debian.org mailto:728...@bugs.debian.org
Subject: Re: Bug#728606
Hello,
I have now switched back to the nouveau drivers, and this way X works.
I used to use the closed source drivers as the nouveau drivers used to be
highly unstable when running a dual screen desktop (1680x1050 plus 1920x1080).
I haven't tried this scenario recently.
Is rsyslog properly enabled?
# sudo systemctl status rsyslog.service
# ls -la /etc/systemd/system/syslog.service
bartjan@fenchurch:~$ sudo systemctl status rsyslog.service
[sudo] password for bartjan:
rsyslog.service - System Logging Service
Loaded: loaded
Hello,
Yesterday I did an apt-get purge and install of rsyslog and since then rsyslog
is working again. This both means that my own problem is solved, but also that
it will be very hard to diagnose this bug any further.
If I can do anything to help, please let me know, but feel free to close
Hello,
Installing (and booting into) linux-image-3.11-1-amd64 has fixed this for me.
Package: gnome
Version: 1:3.8+4
Severity: important
Dear Maintainer,
When I try to start gdm3 or use startx, after a while I get a graphic of a sad
computer and a message stating that something has gone wrong, with the only
option 'logout'.
I really hate filing bugs with this less content,
21:56
To: Bart-Jan Vrielink bart...@vrielink.net mailto:bart...@vrielink.net ;
730...@bugs.debian.org mailto:730...@bugs.debian.org
Subject: Re: Bug#730224: gnome: Gnome fails to start (Oh no! Something has
gone wrong.)
On 22/11/13 21:22, Bart-Jan Vrielink wrote:
Package: gnome
.
-Original message-
From:Laurent Bigonville bi...@debian.org mailto:bi...@debian.org
Sent: Friday 31st January 2014 15:47
To: Michael Biebl bi...@debian.org mailto:bi...@debian.org
Cc: Bart-Jan Vrielink bart...@vrielink.net mailto:bart...@vrielink.net ;
737...@bugs.debian.org mailto:737
Hello,
Today I'm attempting to upgrade my server from squeeze to wheezy and ran into
this problem (why is it not in the release notes!!!)
At the moment I'm not sure if my server will boot when I try to. How can I make
sure that it is bootable again? Repartitioning is not a workaround for an
Package: network-manager
Version: 0.9.10.0-1
Severity: normal
Dear Maintainer,
Each and every time I boot up my laptop at work, and every time the WiFi needs
to re-connect, Network-Manager prompts me for the WPA2-Enterprise password,
although Ask for this password every time is disabled in
Package: facter
Version: 1.6.10-1
Severity: normal
Dear Maintainer,
When I run 'facter selinux' it returns false. This despite the fact that I'm
pretty certain that SELinux is enabled, and in Enforcing mode.
I do not know much about ruby, but I think it is failing in ruby1.9. The
following
Package: selinux-policy-default
Version: 2:2.20110726-12
Severity: normal
Dear Maintainer,
3rd party package puppetdb uses a logrotate configuration that includes the
su puppetdb puppetdb option. This does not work together with the default
SELinux policy, because of the following policy rule:
Package: policycoreutils
Version: 2.3-1
Severity: normal
Dear Maintainer,
resolvconf creates /run/resolvconf/resolv.conf (where /etc/resolv.conf is
symlinked to) using whatever SELinux context it currently is running in. I'm
not sure if this is (or should be) fixable in resolvconf, but a simple
Package: selinux-policy-default
Version: 2:2.20140421-7
Severity: important
Dear Maintainer,
I am trying to get this machine to work properly under SELinux enforcing mode,
but run into all kinds of interesting issues.
One of these issues is that etckeeper, when run from cron, tries to read and
Package: debian-installer
Version: 20161031
Severity: normal
Dear Maintainer,
When trying to install a debian stretch VM using virt-install and a preseed
URL, I found out to my surprise that it downloads /d-i/jessie/./preseed.cfg
instead of /d-i/stretch/./preseed.cfg
Actual command line used:
Package: keepass2
Version: 2.35+dfsg-2
Severity: important
Dear Maintainer,
I just upgraded my laptop from Jessie to Stretch and noticed that Keepass2 is
broken for me.
As Keepass2 does not support TLS1.2 and PFC ciphers (which is a bug in
itself), I am running a small website supporting dumbed
Package: r10k
Version: 2.6.3-1
Severity: important
Dear Maintainer,
When running r10k I get the following error today;
Traceback (most recent call last):
11: from /usr/bin/r10k:3:in `'
10: from /usr/lib/ruby/2.5.0/rubygems/core_ext/kernel_require.rb:59:in
`require'
9:
Package: src:linux
Version: 5.9.1-1
Severity: minor
Dear Maintainer,
The sunrpc.transports sysctl looks emtpy when directly queried with sysctl,
but a closer inspection of /proc/sys/sunrpc/transports reveals a list of null
bytes. Even weirder, sysctl -a does produce a different set of random(?)
Package: libpam-pkcs11
Version: 0.6.11-3
Severity: important
Dear Maintainer,
PAM looks for modules in /lib/x86_64-linux-gnu/security, but this package
installs pam_pkcs11.so in /lib/security.
Creating a symlink to /lib/x86_64-linux-gnu/security/pam_pkcs11.so makes this
module work.
-- System
35 matches
Mail list logo
