Bug#344518: eciadsl: Does not load on boot
Marco d'Itri ha scritto: On Dec 23, Giacomo Orlandi [EMAIL PROTECTED] wrote: Eciadsl driver does not load on boot. If I unplug and replug the modem it works: Is /usr a standalone file system? Or maybe pppd is started before / is mounted read-write. Anyway I do not own any hardware supported by this driver, so you will have to debug this by yourself. I suggest you start by adding to the /lib/hotplug/eciadsl script a logging statement like: exec /dev/eciadsl.log 21 Thanks for the quick reply. /usr is not a standalone partition in my system. The error message in /dev/eciadsl.log is: can't find your EZUSB USB ADSL Loader ERROR eciadsl-firmware: failed Adding some more debug output I realized that when /lib/hotplug/eciadsl is started /proc/bus/usb/devices does not exist, even if usbfs is my /etc/fstab; then I tried to mount usbfs in the script but it's already mounted according to /etc/mtab. What I argued is that at the beginning / is read only and usbfs seems temporary mounted but soon umounted, and so the script fails; later / is mounted rw and then usbfs is definitely mounted and readable. I found a workaround adding until [ -f /proc/bus/usb/devices ] ; do sleep 1 done Is there a better solution? Merry Christmas eve to everybody! Giacomo Orlandi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#344518: eciadsl: Does not load on boot
Package: eciadsl Version: 0.11-2 Severity: important Eciadsl driver does not load on boot. If I unplug and replug the modem it works: usb 1-1: USB disconnect, address 3 ohci_hcd :00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 4 usb 1-1: usbfs: process 4421 (eciadsl-firmwar) did not claim interface 0 before use usb 1-1: USB disconnect, address 4 ohci_hcd :00:02.0: wakeup usb 1-1: new full speed USB device using ohci_hcd and address 5 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. It works the same if I do rmmod ohci_hcd modprobe ohci_hcd I remember that it loaded on boot with old hotplug package, so it could be a udev bug as well. I can give further informations if needed. Regards, Giacomo Orlandi -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-2-k7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages eciadsl depends on: ii libc6 2.3.5-8GNU C Library: Shared libraries an Versions of packages eciadsl recommends: ii ppp 2.4.3-20050321+2 Point-to-Point Protocol (PPP) daem ii udev0.076-6 /dev/ and hotplug management daemo -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#344518: eciadsl: Does not load on boot
On Dec 23, Giacomo Orlandi [EMAIL PROTECTED] wrote: Eciadsl driver does not load on boot. If I unplug and replug the modem it works: Is /usr a standalone file system? Or maybe pppd is started before / is mounted read-write. Anyway I do not own any hardware supported by this driver, so you will have to debug this by yourself. I suggest you start by adding to the /lib/hotplug/eciadsl script a logging statement like: exec /dev/eciadsl.log 21 -- ciao, Marco signature.asc Description: Digital signature
