Package: src:linux Version: 3.16.36-1+deb8u1 Severity: normal Dear Maintainer,
When I try to create a lot of files on an f2fs device (e.g. unpack a rootfs), the process hangs in 'D' state shortly after the start, but running `sync` in a separate terminal lets it lift off again and, eventually, finish successfully (I just leave running `while sleep 5s; do sync; done` until everything is done). Also, the system is generally less responsive while an f2fs device is mounted and files are open on it (e.g. browser stops redrawing itself for long periods of time while not consuming CPU), and, again, responsiveness is back if `while sleep 5s; do sync; done` is running in background. -- Package-specific info: ** Version: Linux version 3.16.0-4-686-pae (debian-ker...@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=6452ebcc-a034-40e6-81a4-148e2ef17a59 ro quiet panic=10 ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [120847.269890] usb 3-6.2: Product: Mass Storage Device [120847.269894] usb 3-6.2: Manufacturer: Generic [120847.269899] usb 3-6.2: SerialNumber: 058F0O1111B [120847.270692] usb-storage 3-6.2:1.0: USB Mass Storage device detected [120847.275062] scsi12 : usb-storage 3-6.2:1.0 [120848.272815] scsi 12:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [120848.273416] sd 12:0:0:0: Attached scsi generic sg4 type 0 [120848.450180] sd 12:0:0:0: [sde] Attached SCSI removable disk [120939.919814] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [120939.926453] sde: sde1 sde2 [120940.337194] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [120940.723348] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [120940.786054] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [121360.375964] SysRq : Emergency Sync [121360.385339] Emergency Sync complete [121360.807974] SysRq : Emergency Sync [121360.817575] Emergency Sync complete [121496.564621] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [121496.571013] sde: sde1 sde2 [121496.704488] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [121496.708752] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [121496.708756] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock [121496.712902] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [121496.712906] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock [121496.996379] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [121497.038357] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [121943.355141] SysRq : Emergency Sync [121943.364349] Emergency Sync complete [121943.547142] SysRq : Emergency Sync [121943.559604] Emergency Sync complete [121943.707142] SysRq : Emergency Sync [121943.717696] Emergency Sync complete [122116.079612] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [122116.086890] sde: sde1 sde2 [122116.222742] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [122116.227796] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [122116.227801] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock [122116.229377] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [122116.229382] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock [122116.340900] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [122116.382596] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [127953.295985] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [127953.302502] sde: sde1 sde2 [127953.436741] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [127953.442612] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [127953.442619] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock [127953.446362] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [127953.446370] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock [127954.037768] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [127954.101708] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [128535.533762] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [128535.540156] sde: sde1 sde2 [128535.676143] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [128535.682831] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [128535.682835] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock [128535.785890] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [128535.785897] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock [128535.865644] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [128535.907718] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [128768.368029] usb 3-6.4: new high-speed USB device number 7 using ehci-pci [128768.477284] usb 3-6.4: New USB device found, idVendor=058f, idProduct=6366 [128768.477291] usb 3-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [128768.477296] usb 3-6.4: Product: Flash Card Reader/Writer [128768.477301] usb 3-6.4: Manufacturer: Generic [128768.477305] usb 3-6.4: SerialNumber: 058F63666438 [128768.477736] usb-storage 3-6.4:1.0: USB Mass Storage device detected [128768.478163] scsi13 : usb-storage 3-6.4:1.0 [128769.476722] scsi 13:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [128769.477248] sd 13:0:0:0: Attached scsi generic sg5 type 0 [128769.814093] sd 13:0:0:0: [sdf] 30535680 512-byte logical blocks: (15.6 GB/14.5 GiB) [128769.815082] sd 13:0:0:0: [sdf] Write Protect is off [128769.815088] sd 13:0:0:0: [sdf] Mode Sense: 03 00 00 00 [128769.817776] sd 13:0:0:0: [sdf] No Caching mode page found [128769.817784] sd 13:0:0:0: [sdf] Assuming drive cache: write through [128769.822355] sdf: sdf1 [128769.827093] sd 13:0:0:0: [sdf] Attached SCSI removable disk [128770.021838] FAT-fs (sdf): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [128770.023843] F2FS-fs (sdf): Magic Mismatch, valid(0xf2f52010) - read(0x0) [128770.023847] F2FS-fs (sdf): Can't find valid F2FS filesystem in 1th superblock [128770.025249] F2FS-fs (sdf): Magic Mismatch, valid(0xf2f52010) - read(0x0) [128770.025253] F2FS-fs (sdf): Can't find valid F2FS filesystem in 2th superblock [128770.173259] FAT-fs (sdf1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [129710.585533] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [129710.592550] sde: sde1 sde2 [129710.856669] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [129710.858781] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [129710.858787] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock [129710.859279] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [129710.859283] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock [129711.139046] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [129711.181375] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) [133325.810816] sd 12:0:0:0: [sde] 30392320 512-byte logical blocks: (15.5 GB/14.4 GiB) [133325.816581] sde: sde1 sde2 [133326.099950] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [133326.102731] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [133326.102735] F2FS-fs (sde): Can't find valid F2FS filesystem in 1th superblock [133326.103313] F2FS-fs (sde): Magic Mismatch, valid(0xf2f52010) - read(0x0) [133326.103317] F2FS-fs (sde): Can't find valid F2FS filesystem in 2th superblock [133326.376331] EXT4-fs (sde1): mounting ext2 file system using the ext4 subsystem [133326.418308] EXT4-fs (sde1): mounted filesystem without journal. Opts: (null) ** Model information not available ** Loaded modules: f2fs xt_multiport iptable_filter ip_tables snd_hrtimer snd_seq_midi snd_seq_midi_event x_tables snd_rawmidi snd_seq snd_seq_device binfmt_misc pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) zram nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nls_utf8 nls_cp437 vfat fat iTCO_wdt iTCO_vendor_support radeon ttm snd_hda_codec_analog snd_hda_codec_generic drm_kms_helper drm evdev i2c_algo_bit serio_raw snd_hda_intel lpc_ich i2c_i801 i2c_core snd_hda_controller mfd_core snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore shpchp asus_atk0110 button acpi_cpufreq processor thermal_sys coretemp loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sha256_generic ecb cbc algif_skcipher af_alg dm_crypt dm_mod hid_generic usbhid hid sg ata_generic sd_mod crc_t10dif crct10dif_generic crct10dif_common usb_storage psmouse ahci libahci pata_jmicron libata scsi_mod r8169 mii floppy ehci_pci uhci_hcd ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82P965/G965 Memory Controller Hub [8086:29a0] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ea] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82P965/G965 PCI Express Root Port [8086:29a1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00008000-0000afff Memory behind bridge: ff700000-ff7fffff Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e000 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at e080 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at ffaff400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at ffaf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-803fffff Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ff900000-ff9fffff Prefetchable memory behind bridge: 0000000080400000-00000000805fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ff800000-ff8fffff Prefetchable memory behind bridge: 0000000080600000-00000000807fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ffaff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 82801HB (ICH8) 4 port SATA Controller [AHCI mode] [8086:2824] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 45 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=32] Region 5: Memory at ffaff800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: ASUSTeK Computer Inc. P5B [1043:81ec] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300/X550/X1050 Series] [1002:5b63] (prog-if 00 [VGA controller]) Subsystem: Tul Corporation / PowerColor Device [148c:2134] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at a000 [size=256] Region 2: Memory at ff7f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at ff7c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300/X550/X1050 Series] (Secondary) [1002:5b73] Subsystem: Tul Corporation / PowerColor Device [148c:2135] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Region 0: Memory at ff7e0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at ff8fe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at ff8e0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci 02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. P5B [JMB363] [1043:81e4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at c800 [size=256] Region 2: Memory at ff9ff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ff9c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 003 Device 007: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 006: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 005: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 004: ID 1058:0702 Western Digital Technologies, Inc. Passport External HDD Bus 003 Device 002: ID 1058:1042 Western Digital Technologies, Inc. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 040b:2000 Weltrend Semiconductor Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.5 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Foreign Architectures: armhf Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-3.16.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16.0-4-686-pae recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 ii libc6-i686 2.19-18+deb8u4 Versions of packages linux-image-3.16.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii extlinux 3:6.03+dfsg-5+deb8u1 ii grub-pc 2.02~beta2-22+deb8u1 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information excluded