Package: libasound2 Version: 1.1.7-2 Severity: grave Justification: renders package unusable
Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? After upgrading from 1.1.6-1 to 1.1.7-2, the crash began every time the device was connected. * What exactly did you do (or not do) that was effective (or ineffective)? I downgraded back to 1.1.6-1 * What was the outcome of this action? It works again * What outcome did you expect instead? Here is the dmesg from the crash: [ 321.160923] usb 2-3: new high-speed USB device number 4 using xhci_hcd [ 321.319001] usb 2-3: New USB device found, idVendor=2972, idProduct=0035, bcdDevice= 1.05 [ 321.319007] usb 2-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 321.319010] usb 2-3: Product: FiiO Q1 [ 321.319013] usb 2-3: Manufacturer: GuangZhou FiiO Electronics Co.,Ltd [ 321.319015] usb 2-3: SerialNumber: FFB14517 [ 324.611237] usb 2-3: 1:3 : unsupported format bits 0x100000000 [ 324.819415] usbcore: registered new interface driver snd-usb-audio [ 326.361759] pulseaudio[2051]: segfault at fffffffffffffff0 ip 00007f7caa8bb906 sp 00007fff6ac1f110 error 5 in libasound.so.2.0.0[7f7caa8ae000+8f000] [ 326.361767] Code: 36 08 00 e8 8c 2c ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 55 53 48 83 ec 08 48 8b 35 13 47 0c 00 48 85 ff 0f 84 0d 01 00 00 <48> 8b 57 20 48 8b 4f 28 48 89 fb 31 ed 48 8d 05 f6 46 0c 00 48 89 [ 327.803101] pulseaudio[3544]: segfault at 51 ip 00007f965056391a sp 00007ffc5cbca870 error 6 in libasound.so.2.0.0[7f9650556000+8f000] [ 327.803108] Code: 55 53 48 83 ec 08 48 8b 35 13 47 0c 00 48 85 ff 0f 84 0d 01 00 00 48 8b 57 20 48 8b 4f 28 48 89 fb 31 ed 48 8d 05 f6 46 0c 00 <48> 89 11 48 89 4a 08 48 39 c6 74 05 48 39 00 74 75 8b 03 85 c0 74 [ 329.213504] pulseaudio[3547]: segfault at fffffffffffffff0 ip 00007f30e2b3b906 sp 00007ffec3480d80 error 5 in libasound.so.2.0.0[7f30e2b2e000+8f000] [ 329.213511] Code: 36 08 00 e8 8c 2c ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 55 53 48 83 ec 08 48 8b 35 13 47 0c 00 48 85 ff 0f 84 0d 01 00 00 <48> 8b 57 20 48 8b 4f 28 48 89 fb 31 ed 48 8d 05 f6 46 0c 00 48 89 [ 330.451686] traps: pulseaudio[3551] general protection ip:7fbb1ef2f5d6 sp:7ffdbe6617a8 error:0 in libasound.so.2.0.0[7fbb1eef6000+8f000] [ 331.698768] traps: pulseaudio[3555] general protection ip:7f91d50c73b9 sp:7ffdc2da0490 error:0 in libasound.so.2.0.0[7f91d508e000+8f000] [ 332.940592] traps: pulseaudio[3558] general protection ip:7f24d3043906 sp:7fff49355f10 error:0 in libasound.so.2.0.0[7f24d3036000+8f000] *** End of the template - remove these template lines *** -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.18.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled *** /tmp/usb_audio_crash.log [ 0.000000] Linux version 4.18.0-2-amd64 (debian-ker...@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.10-2 (2018-11-02) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=848aae12-d401-440b-8bb7-aee1d05d8a23 ro quiet iommu=soft [ 0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce4b5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ce4b6000-0x00000000cedb5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cedb6000-0x00000000defbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000defbf000-0x00000000df1befff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000df1bf000-0x00000000df8befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df8bf000-0x00000000dfbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0b00000-0x00000000f0bfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001feffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000001ff000000-0x000000021effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by Dell Inc. [ 0.000000] efi: SMBIOS=0xdf267000 ESRT=0xdf268718 ACPI 2.0=0xdfbfe014 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Dell Inc. Inspiron 5565/0RVKF9, BIOS 1.1.1 07/17/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x1ff000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000FF800000 mask FFFFFF800000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000021f000000 aka 8688M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0xdfc00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000df268718 to 0x00000000df268750. [ 0.000000] Base memory trampoline at [(____ptrval____)] 25000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x2f04b000, 0x2f04bfff] PGTABLE [ 0.000000] BRK [0x2f04c000, 0x2f04cfff] PGTABLE [ 0.000000] BRK [0x2f04d000, 0x2f04dfff] PGTABLE [ 0.000000] BRK [0x2f04e000, 0x2f04efff] PGTABLE [ 0.000000] BRK [0x2f04f000, 0x2f04ffff] PGTABLE [ 0.000000] BRK [0x2f050000, 0x2f050fff] PGTABLE [ 0.000000] BRK [0x2f051000, 0x2f051fff] PGTABLE [ 0.000000] BRK [0x2f052000, 0x2f052fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34dd9000-0x366e3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x00000000DFBD5188 0000C4 (v01 DELL CL09 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000DFBF8000 00010C (v05 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: DSDT 0x00000000DFBEB000 008E12 (v01 DELL CL09 00040000 ASL 00040000) [ 0.000000] ACPI: FACS 0x00000000DFBB0000 000040 [ 0.000000] ACPI: SLIC 0x00000000DFBFD000 000176 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: UEFI 0x00000000DFBFC000 000236 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: UEFI 0x00000000DFBFB000 000042 (v01 DELL CL09 00000000 ASL 00000000) [ 0.000000] ACPI: ASF! 0x00000000DFBFA000 0000A5 (v32 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: BOOT 0x00000000DFBF9000 000028 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: HPET 0x00000000DFBF7000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: APIC 0x00000000DFBF6000 000090 (v03 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: MCFG 0x00000000DFBF5000 00003C (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: SLIC 0x00000000DFBF4000 000176 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBE9000 0009F8 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DFBE0000 00888F (v02 AMD AGESA 00000002 MSFT 04000000) [ 0.000000] ACPI: IVRS 0x00000000DFBDF000 0000D0 (v02 DELL CL09 00000001 ASL 00000000) [ 0.000000] ACPI: CRAT 0x00000000DFBDE000 000528 (v01 DELL CL09 00000001 ASL 00000001) [ 0.000000] ACPI: SSDT 0x00000000DFBDD000 000482 (v01 INTEL TPMACPI 00001000 INTL 20130117) [ 0.000000] ACPI: TPM2 0x00000000DFBDC000 000034 (v03 DELL CL09 00000002 ASL 01000013) [ 0.000000] ACPI: SSDT 0x00000000DFBDA000 0015C5 (v01 AMD CPMDFIGP 00000001 INTL 20130117) [ 0.000000] ACPI: SSDT 0x00000000DFBD8000 00165E (v01 AMD CPMCMN 00000001 INTL 20130117) [ 0.000000] ACPI: FPDT 0x00000000DFBD7000 000044 (v01 DELL CL09 00000002 ASL 01000013) [ 0.000000] ACPI: BGRT 0x00000000DFBD6000 000038 (v01 DELL CL09 00000001 ASL 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001feffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1feff9000-0x1feffdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001feffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000087fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ce4b5fff] [ 0.000000] node 0: [mem 0x00000000cedb6000-0x00000000defbefff] [ 0.000000] node 0: [mem 0x00000000dfbff000-0x00000000dfbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001feffffff] [ 0.000000] Reserved but unavailable: 10681 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001feffffff] [ 0.000000] On node 0 totalpages: 1955399 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1135 pages reserved [ 0.000000] DMA zone: 3975 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14171 pages used for memmap [ 0.000000] DMA32 zone: 906944 pages, LIFO batch:31 [ 0.000000] Normal zone: 16320 pages used for memmap [ 0.000000] Normal zone: 1044480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xce4b6000-0xcedb5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdefbf000-0xdf1befff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf1bf000-0xdf8befff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf8bf000-0xdfbbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf0afffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0b00000-0xf0bfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0c00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf0afffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u524288 [ 0.000000] pcpu-alloc: s142744 r8192 d29288 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1923709 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=848aae12-d401-440b-8bb7-aee1d05d8a23 ro quiet iommu=soft [ 0.000000] Memory: 7515940K/7821596K available (10252K kernel code, 1223K rwdata, 3260K rodata, 1548K init, 656K bss, 305656K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 31267 entries in 123 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2495.336 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f803b6dae, max_idle_ns: 440795241944 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.67 BogoMIPS (lpj=9981344) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.032010] Security Framework initialized [ 0.032012] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.032037] AppArmor: AppArmor initialized [ 0.034241] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.035396] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.035454] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.035491] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.035763] mce: CPU supports 7 MCE banks [ 0.035772] LVT offset 1 assigned for vector 0xf9 [ 0.035778] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.035779] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.035781] Spectre V2 : Mitigation: Full AMD retpoline [ 0.035782] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.035783] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.035877] Freeing SMP alternatives memory: 24K [ 0.048000] smpboot: CPU0: AMD A12-9700P RADEON R7, 10 COMPUTE CORES 4C+6G (family: 0x15, model: 0x65, stepping: 0x1) [ 0.048000] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.048000] ... version: 0 [ 0.048000] ... bit width: 48 [ 0.048000] ... generic registers: 6 [ 0.048000] ... value mask: 0000ffffffffffff [ 0.048000] ... max period: 00007fffffffffff [ 0.048000] ... fixed-purpose events: 0 [ 0.048000] ... event mask: 000000000000003f [ 0.048000] Hierarchical SRCU implementation. [ 0.048000] smp: Bringing up secondary CPUs ... [ 0.048000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.048000] x86: Booting SMP configuration: [ 0.048000] .... node #0, CPUs: #1 #2 #3 [ 0.052068] smp: Brought up 1 node, 4 CPUs [ 0.052068] smpboot: Max logical packages: 1 [ 0.052068] smpboot: Total of 4 processors activated (19962.68 BogoMIPS) [ 0.053109] devtmpfs: initialized [ 0.053109] x86/mm: Memory block size: 128MB [ 0.053109] PM: Registering ACPI NVS region [mem 0xdf8bf000-0xdfbbefff] (3145728 bytes) [ 0.053109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.053109] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.056041] pinctrl core: initialized pinctrl subsystem [ 0.056475] NET: Registered protocol family 16 [ 0.056575] audit: initializing netlink subsys (disabled) [ 0.056654] audit: type=2000 audit(1541863649.056:1): state=initialized audit_enabled=0 res=1 [ 0.056654] cpuidle: using governor ladder [ 0.056654] cpuidle: using governor menu [ 0.060116] Simple Boot Flag at 0x44 set to 0x1 [ 0.060146] ACPI: bus type PCI registered [ 0.060148] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.060244] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.060267] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.060267] PCI: Using configuration type 1 for base access [ 0.064151] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.064151] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064190] ACPI: Added _OSI(Module Device) [ 0.064190] ACPI: Added _OSI(Processor Device) [ 0.064190] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064190] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064190] ACPI: Added _OSI(Linux-Dell-Video) [ 0.073803] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.077604] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.085487] ACPI: EC: EC started [ 0.085488] ACPI: EC: interrupt blocked [ 0.086091] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.086093] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.086095] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.086095] ACPI: Interpreter enabled [ 0.086115] ACPI: (supports S0 S3 S4 S5) [ 0.086117] ACPI: Using IOAPIC for interrupt routing [ 0.086232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.086483] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.087751] ACPI: Power Resource [P0U2] (off) [ 0.087778] ACPI: Power Resource [P3U2] (off) [ 0.088037] ACPI: Power Resource [P0U3] (off) [ 0.088062] ACPI: Power Resource [P3U3] (off) [ 0.089173] ACPI: Power Resource [P0ST] (on) [ 0.089200] ACPI: Power Resource [P3ST] (on) [ 0.089618] ACPI: Power Resource [P0SD] (off) [ 0.089647] ACPI: Power Resource [P3SD] (off) [ 0.091828] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.091833] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.091930] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.092021] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.092033] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.092103] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cfbff]) [ 0.092228] PCI host bridge to bus 0000:00 [ 0.092229] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.092231] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.092232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.092233] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.092234] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.092235] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.092236] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.092238] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.092239] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.092240] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.092241] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.092242] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.092243] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.092244] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.092245] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.092246] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.092247] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.092256] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000 [ 0.092339] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600 [ 0.092510] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000 [ 0.092535] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.092545] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.092551] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff] [ 0.092558] pci 0000:00:01.0: reg 0x24: [mem 0xf0e00000-0xf0e3ffff] [ 0.092571] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.092575] pci 0000:00:01.0: enabling Extended Tags [ 0.092584] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.092617] pci 0000:00:01.0: supports D1 D2 [ 0.092618] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.092738] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.092754] pci 0000:00:01.1: reg 0x10: [mem 0xf0e60000-0xf0e63fff 64bit] [ 0.092779] pci 0000:00:01.1: enabling Extended Tags [ 0.092809] pci 0000:00:01.1: supports D1 D2 [ 0.092869] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000 [ 0.092947] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400 [ 0.092982] pci 0000:00:02.2: enabling Extended Tags [ 0.093020] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.093095] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400 [ 0.093129] pci 0000:00:02.3: enabling Extended Tags [ 0.093166] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.093237] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000 [ 0.093350] pci 0000:00:03.1: [1022:157c] type 01 class 0x060400 [ 0.093386] pci 0000:00:03.1: enabling Extended Tags [ 0.093424] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.093505] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000 [ 0.093518] pci 0000:00:08.0: reg 0x10: [mem 0xf0e40000-0xf0e5ffff 64bit pref] [ 0.093523] pci 0000:00:08.0: reg 0x18: [mem 0xf0c00000-0xf0cfffff] [ 0.093527] pci 0000:00:08.0: reg 0x1c: [mem 0xf0e70000-0xf0e70fff] [ 0.093535] pci 0000:00:08.0: reg 0x24: [mem 0xf0e6a000-0xf0e6bfff] [ 0.093607] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000 [ 0.093750] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300 [ 0.093766] pci 0000:00:09.2: reg 0x10: [mem 0xf0e64000-0xf0e67fff] [ 0.093807] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold [ 0.093904] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330 [ 0.093966] pci 0000:00:10.0: reg 0x10: [mem 0xf0e68000-0xf0e69fff 64bit] [ 0.094065] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.094150] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601 [ 0.094168] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f] [ 0.094176] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127] [ 0.094184] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117] [ 0.094192] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123] [ 0.094200] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f] [ 0.094208] pci 0000:00:11.0: reg 0x24: [mem 0xf0e6c000-0xf0e6c3ff] [ 0.094244] pci 0000:00:11.0: PME# supported from D3hot [ 0.094306] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320 [ 0.095938] pci 0000:00:12.0: reg 0x10: [mem 0xf0e6e000-0xf0e6e0ff] [ 0.100036] pci 0000:00:12.0: supports D1 D2 [ 0.100037] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.100123] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.100283] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.100401] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501 [ 0.100423] pci 0000:00:14.7: reg 0x10: [mem 0xf0e6d000-0xf0e6d0ff 64bit] [ 0.100488] pci 0000:00:14.7: PME# supported from D3cold [ 0.100547] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000 [ 0.100608] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000 [ 0.100666] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000 [ 0.100732] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000 [ 0.100793] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000 [ 0.100849] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000 [ 0.101010] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.101040] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.101069] pci 0000:01:00.0: reg 0x18: [mem 0xf0d00000-0xf0d00fff 64bit] [ 0.101089] pci 0000:01:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref] [ 0.101185] pci 0000:01:00.0: supports D1 D2 [ 0.101186] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.101388] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.101393] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.101397] pci 0000:00:02.2: bridge window [mem 0xf0d00000-0xf0dfffff] [ 0.101413] pci 0000:00:02.2: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref] [ 0.101664] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 [ 0.101848] pci 0000:02:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit] [ 0.102495] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.103054] pci 0000:00:02.3: PCI bridge to [bus 02] [ 0.103060] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff] [ 0.103121] pci 0000:00:03.1: PCI bridge to [bus 03] [ 0.164365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164494] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164558] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164627] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164688] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164737] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164784] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled. [ 0.164830] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled. [ 0.165520] ACPI: EC: interrupt unblocked [ 0.165529] ACPI: EC: event unblocked [ 0.165536] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.165538] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.165617] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.165617] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.165617] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.165617] vgaarb: loaded [ 0.292906] pps_core: LinuxPPS API ver. 1 registered [ 0.292908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giome...@linux.it> [ 0.292911] PTP clock support registered [ 0.292922] EDAC MC: Ver: 3.0.0 [ 0.293063] Registered efivars operations [ 0.317208] PCI: Using ACPI for IRQ routing [ 0.317743] PCI: pci_cache_line_size set to 64 bytes [ 0.317905] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.317907] e820: reserve RAM buffer [mem 0xce4b6000-0xcfffffff] [ 0.317908] e820: reserve RAM buffer [mem 0xdefbf000-0xdfffffff] [ 0.317909] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff] [ 0.317910] e820: reserve RAM buffer [mem 0x1ff000000-0x1ffffffff] [ 0.318059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.318059] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.321222] clocksource: Switched to clocksource tsc-early [ 0.332611] VFS: Disk quotas dquot_6.6.0 [ 0.332635] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.332794] AppArmor: AppArmor Filesystem Enabled [ 0.332819] pnp: PnP ACPI init [ 0.333047] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.333049] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.333051] system 00:00: [mem 0xf0b00000-0xf0bfffff] has been reserved [ 0.333058] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.333186] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.333213] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.333236] pnp 00:03: Plug and Play ACPI device, IDs DLL0769 PNP0f13 (active) [ 0.333288] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.333290] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.333292] system 00:04: [io 0x04d6] has been reserved [ 0.333293] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.333295] system 00:04: [io 0x0c14] has been reserved [ 0.333297] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.333298] system 00:04: [io 0x0c6c] has been reserved [ 0.333300] system 00:04: [io 0x0c6f] has been reserved [ 0.333301] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.333306] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.333369] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.333371] system 00:05: [mem 0xff800000-0xffffffff] has been reserved [ 0.333375] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.399252] pnp: PnP ACPI: found 6 devices [ 0.438347] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.438357] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.438385] pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.438387] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.438389] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.438401] pci 0000:00:03.1: BAR 14: assigned [mem 0xf0f00000-0xf10fffff] [ 0.438410] pci 0000:00:03.1: BAR 15: assigned [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.438414] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0e80000-0xf0e9ffff pref] [ 0.438417] pci 0000:00:03.1: BAR 13: assigned [io 0x1000-0x1fff] [ 0.438421] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.438423] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.438426] pci 0000:00:02.2: bridge window [mem 0xf0d00000-0xf0dfffff] [ 0.438429] pci 0000:00:02.2: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref] [ 0.438433] pci 0000:00:02.3: PCI bridge to [bus 02] [ 0.438436] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff] [ 0.438442] pci 0000:00:03.1: PCI bridge to [bus 03] [ 0.438443] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff] [ 0.438447] pci 0000:00:03.1: bridge window [mem 0xf0f00000-0xf10fffff] [ 0.438449] pci 0000:00:03.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.438455] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.438456] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.438458] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.438459] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.438460] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.438461] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.438462] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] [ 0.438463] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] [ 0.438464] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] [ 0.438465] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] [ 0.438466] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] [ 0.438467] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] [ 0.438468] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] [ 0.438469] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] [ 0.438470] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window] [ 0.438471] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window] [ 0.438473] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.438474] pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf0dfffff] [ 0.438475] pci_bus 0000:01: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref] [ 0.438476] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf09fffff] [ 0.438477] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.438478] pci_bus 0000:03: resource 1 [mem 0xf0f00000-0xf10fffff] [ 0.438480] pci_bus 0000:03: resource 2 [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.438591] NET: Registered protocol family 2 [ 0.438749] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.438774] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.438903] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.439159] TCP: Hash tables configured (established 65536 bind 65536) [ 0.439229] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.439271] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.439368] NET: Registered protocol family 1 [ 0.439393] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.439399] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0 [ 0.454447] pci 0000:00:10.0: quirk_usb_early_handoff+0x0/0x6b0 took 14623 usecs [ 0.474903] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6b0 took 19958 usecs [ 0.474980] PCI: CLS 64 bytes, default 64 [ 0.475035] Unpacking initramfs... [ 0.893471] Freeing initrd memory: 25644K [ 0.893561] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.893565] software IO TLB [mem 0xd82ea000-0xdc2ea000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 0.893602] amd_uncore: AMD NB counters detected [ 0.893878] LVT offset 0 assigned for vector 0x400 [ 0.893922] perf: AMD IBS detected (0x000007ff) [ 0.895032] Initialise system trusted keyrings [ 0.895426] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.897004] zbud: loaded [ 0.897350] pstore: using deflate compression [ 1.200363] Key type asymmetric registered [ 1.200366] Asymmetric key parser 'x509' registered [ 1.200431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.200492] io scheduler noop registered [ 1.200493] io scheduler deadline registered [ 1.200544] io scheduler cfq registered (default) [ 1.200545] io scheduler mq-deadline registered [ 1.201467] pcieport 0000:00:02.2: Signaling PME with IRQ 25 [ 1.201486] pcieport 0000:00:02.3: Signaling PME with IRQ 26 [ 1.201502] pcieport 0000:00:03.1: Signaling PME with IRQ 28 [ 1.201518] pciehp 0000:00:03.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+ [ 1.201555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.201571] efifb: probing for efifb [ 1.201587] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k [ 1.201588] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.201588] efifb: scrolling: redraw [ 1.201589] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.203602] Console: switching to colour frame buffer device 170x48 [ 1.205462] fb0: EFI VGA frame buffer device [ 1.206144] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.206647] Linux agpgart interface v0.103 [ 1.206981] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de> [ 1.206981] AMD IOMMUv2 functionality not available on this system [ 1.207467] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.237641] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.237645] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.237962] mousedev: PS/2 mouse device common for all mice [ 1.238005] rtc_cmos 00:01: RTC can wake from S4 [ 1.238137] rtc_cmos 00:01: registered as rtc0 [ 1.238152] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.238212] ledtrig-cpu: registered to indicate activity on CPUs [ 1.238812] NET: Registered protocol family 10 [ 1.244734] Segment Routing with IPv6 [ 1.244763] mip6: Mobile IPv6 [ 1.244766] NET: Registered protocol family 17 [ 1.244772] mpls_gso: MPLS GSO support [ 1.245202] microcode: CPU0: patch_level=0x06006118 [ 1.245209] microcode: CPU1: patch_level=0x06006118 [ 1.245218] microcode: CPU2: patch_level=0x06006118 [ 1.245225] microcode: CPU3: patch_level=0x06006118 [ 1.245279] microcode: Microcode Update Driver: v2.2. [ 1.245295] sched_clock: Marking stable (1245272608, 0)->(1329661829, -84389221) [ 1.245522] registered taskstats version 1 [ 1.245523] Loading compiled-in X.509 certificates [ 1.249074] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.286847] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 1.286881] zswap: loaded using pool lzo/zbud [ 1.286990] AppArmor: AppArmor sha1 policy hashing enabled [ 1.287541] rtc_cmos 00:01: setting system clock to 2018-11-10 15:27:30 UTC (1541863650) [ 1.290071] Freeing unused kernel image memory: 1548K [ 1.312264] Write protecting the kernel read-only data: 16384k [ 1.313061] Freeing unused kernel image memory: 2028K [ 1.313550] Freeing unused kernel image memory: 836K [ 1.320664] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.439655] hidraw: raw HID events driver (C) Jiri Kosina [ 1.441155] i2c_hid i2c-DELL0769:00: i2c-DELL0769:00 supply vdd not found, using dummy regulator [ 1.446563] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.447354] r8169 0000:01:00.0 eth0: RTL8106e, 28:f1:0e:3f:50:84, XID 44900000, IRQ 31 [ 1.451176] SCSI subsystem initialized [ 1.455257] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.455260] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.457093] sdhci: Secure Digital Host Controller Interface driver [ 1.457094] sdhci: Copyright(c) Pierre Ossman [ 1.457164] ACPI: bus type USB registered [ 1.457197] usbcore: registered new interface driver usbfs [ 1.457212] usbcore: registered new interface driver hub [ 1.457257] usbcore: registered new device driver usb [ 1.459061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.459062] cryptd: max_cpu_qlen set to 1000 [ 1.459286] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1) [ 1.459457] ehci-pci: EHCI PCI platform driver [ 1.459759] ehci-pci 0000:00:12.0: EHCI Host Controller [ 1.459772] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.459787] ehci-pci 0000:00:12.0: debug port 2 [ 1.459843] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0e6e000 [ 1.460951] AVX2 version of gcm_enc/dec engaged. [ 1.460954] AES CTR mode by8 optimization enabled [ 1.461424] random: fast init done [ 1.464803] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit [ 1.465094] libata version 3.00 loaded. [ 1.468634] ahci 0000:00:11.0: version 3.0 [ 1.468872] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.468876] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 1.469364] scsi host0: ahci [ 1.469675] scsi host1: ahci [ 1.469787] ata1: SATA max UDMA/133 abar m1024@0xf0e6c000 port 0xf0e6c100 irq 19 [ 1.469790] ata2: SATA max UDMA/133 abar m1024@0xf0e6c000 port 0xf0e6c180 irq 19 [ 1.472039] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00 [ 1.472124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.472126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472128] usb usb1: Product: EHCI Host Controller [ 1.472130] usb usb1: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd [ 1.472131] usb usb1: SerialNumber: 0000:00:12.0 [ 1.472366] hub 1-0:1.0: USB hub found [ 1.472383] hub 1-0:1.0: 2 ports detected [ 1.473091] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.473108] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.473334] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410 [ 1.473736] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.473738] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.473740] usb usb2: Product: xHCI Host Controller [ 1.473742] usb usb2: Manufacturer: Linux 4.18.0-2-amd64 xhci-hcd [ 1.473743] usb usb2: SerialNumber: 0000:00:10.0 [ 1.473915] hub 2-0:1.0: USB hub found [ 1.473929] hub 2-0:1.0: 4 ports detected [ 1.474301] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.474308] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 1.474321] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 1.476462] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.480027] input: DELL0769:00 06CB:7E92 Mouse as /devices/platform/AMD0010:03/i2c-0/i2c-DELL0769:00/0018:06CB:7E92.0001/input/input3 [ 1.480113] input: DELL0769:00 06CB:7E92 Touchpad as /devices/platform/AMD0010:03/i2c-0/i2c-DELL0769:00/0018:06CB:7E92.0001/input/input4 [ 1.480172] hid-generic 0018:06CB:7E92.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0769:00 06CB:7E92] on i2c-DELL0769:00 [ 1.480292] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.480339] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.480341] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.480343] usb usb3: Product: xHCI Host Controller [ 1.480344] usb usb3: Manufacturer: Linux 4.18.0-2-amd64 xhci-hcd [ 1.480346] usb usb3: SerialNumber: 0000:00:10.0 [ 1.481291] hub 3-0:1.0: USB hub found [ 1.481308] hub 3-0:1.0: 4 ports detected [ 1.481475] usb: port power management may be unreliable [ 1.808242] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.808267] usb 2-1: new full-speed USB device number 2 using xhci_hcd [ 1.888204] tsc: Refined TSC clocksource calibration: 2495.317 MHz [ 1.888246] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7f206bf1, max_idle_ns: 440795322908 ns [ 1.888373] clocksource: Switched to clocksource tsc [ 1.940270] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.940297] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.943115] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A1C1, max UDMA/100 [ 1.948001] ata2.00: configured for UDMA/100 [ 1.964547] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18 [ 1.964550] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.964824] hub 1-1:1.0: USB hub found [ 1.964915] hub 1-1:1.0: 4 ports detected [ 1.991435] usb 2-1: New USB device found, idVendor=0cf3, idProduct=e009, bcdDevice= 0.01 [ 1.991438] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.997442] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX0P3D, max UDMA/100 [ 1.997445] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.999089] ata1.00: configured for UDMA/100 [ 1.999284] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 3D PQ: 0 ANSI: 5 [ 2.002582] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A1C1 PQ: 0 ANSI: 5 [ 2.040268] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.040271] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.040279] sd 0:0:0:0: [sda] Write Protect is off [ 2.040281] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.040291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.079834] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.079837] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.080476] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.128301] usb 2-2: new full-speed USB device number 3 using xhci_hcd [ 2.158460] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 2.159478] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.252209] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.315435] usb 2-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.315437] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.315439] usb 2-2: Product: USB Receiver [ 2.315440] usb 2-2: Manufacturer: Logitech [ 2.342783] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:046D:C534.0002/input/input6 [ 2.360871] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.360875] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.360876] usb 1-1.1: Product: USB2.0-CRW [ 2.360878] usb 1-1.1: Manufacturer: Generic [ 2.360879] usb 1-1.1: SerialNumber: 20100201396000000 [ 2.369105] usbcore: registered new interface driver rtsx_usb [ 2.400667] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2/input0 [ 2.428225] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:046D:C534.0003/input/input7 [ 2.428380] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:046D:C534.0003/input/input8 [ 2.444193] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 2.488342] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.1/0003:046D:C534.0003/input/input9 [ 2.488636] hid-generic 0003:046D:C534.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2/input1 [ 2.488692] usbcore: registered new interface driver usbhid [ 2.488692] usbhid: USB HID core driver [ 2.561016] usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c01, bcdDevice=65.03 [ 2.561019] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.561020] usb 1-1.3: Product: Integrated Webcam [ 2.561021] usb 1-1.3: Manufacturer: SY20160813215718 [ 3.052265] PM: Image not found (code -22) [ 3.306822] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.886352] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time. [ 5.510157] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default- hierarchy=hybrid) [ 5.528630] systemd[1]: Detected architecture x86-64. [ 5.542539] systemd[1]: Set hostname to <Grant2017>. [ 8.032805] random: systemd: uninitialized urandom read (16 bytes read) [ 8.032969] systemd[1]: Listening on udev Control Socket. [ 8.033059] random: systemd: uninitialized urandom read (16 bytes read) [ 8.033067] systemd[1]: Reached target User and Group Name Lookups. [ 8.033074] random: systemd: uninitialized urandom read (16 bytes read) [ 8.034766] systemd[1]: Created slice system-tor.slice. [ 8.034836] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.042570] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.042769] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.042889] systemd[1]: Listening on Journal Audit Socket. [ 8.430162] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 8.538827] RPC: Registered named UNIX socket transport module. [ 8.538828] RPC: Registered udp transport module. [ 8.538829] RPC: Registered tcp transport module. [ 8.538829] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.680335] lp: driver loaded but no devices found [ 8.684037] ppdev: user-space parallel port driver [ 8.947887] systemd-journald[291]: Received request to flush runtime journal from PID 1 [ 10.707351] acpi_cpufreq: overriding BIOS provided _PSD data [ 10.832703] ACPI: AC Adapter [ACAD] (on-line) [ 10.834918] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12 [ 10.834936] ACPI: Power Button [PWRB] [ 10.835013] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13 [ 10.835022] ACPI: Sleep Button [SLPB] [ 10.835118] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input14 [ 10.835128] ACPI: Lid Switch [LID] [ 10.835195] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15 [ 10.835212] ACPI: Power Button [PWRF] [ 10.850997] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 10.960295] ACPI: Battery Slot [BAT1] (battery present) [ 11.037597] input: DELL Wireless hotkeys as /devices/virtual/input/input16 [ 11.214433] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 11.215076] acpi device:00: registered as cooling_device4 [ 11.215170] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 [ 11.247524] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 11.247649] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 11.247793] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 11.292881] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.292929] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 11.405111] input: DELL0769:00 06CB:7E92 Touchpad as /devices/platform/AMD0010:03/i2c-0/i2c-DELL0769:00/0018:06CB:7E92.0001/input/input19 [ 11.405463] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdfbba000-0xdfbbdfff] [ 11.405545] tpm_crb: probe of MSFT0101:00 failed with error -16 [ 11.405925] hid-multitouch 0018:06CB:7E92.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0769:00 06CB:7E92] on i2c-DELL0769:00 [ 11.432833] EFI Variables Facility v0.08 2004-May-17 [ 11.602908] pstore: Registered efi as persistent store backend [ 11.652458] input: PC Speaker as /devices/platform/pcspkr/input/input21 [ 11.652922] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 11.657142] [drm] amdgpu kernel modesetting enabled. [ 11.739916] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 11.788874] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input22 [ 11.839711] Parsing CRAT table with 1 nodes [ 11.839716] Creating topology SYSFS entries [ 11.839742] Topology: Add APU node [0x0:0x0] [ 11.839742] Finished initializing topology [ 11.839797] kfd kfd: Initialized module [ 11.840117] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 11.840119] fb: switching to amdgpudrmfb from EFI VGA [ 11.840172] Console: switching to colour dummy device 80x25 [ 11.840660] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1028:0x0769 0xC9). [ 11.840681] [drm] register mmio base: 0xF0E00000 [ 11.840682] [drm] register mmio size: 262144 [ 11.840694] [drm] add ip block number 0 <vi_common> [ 11.840696] [drm] add ip block number 1 <gmc_v8_0> [ 11.840697] [drm] add ip block number 2 <cz_ih> [ 11.840698] [drm] add ip block number 3 <powerplay> [ 11.840699] [drm] add ip block number 4 <dm> [ 11.840700] [drm] add ip block number 5 <gfx_v8_0> [ 11.840701] [drm] add ip block number 6 <sdma_v3_0> [ 11.840702] [drm] add ip block number 7 <uvd_v6_0> [ 11.840703] [drm] add ip block number 8 <vce_v3_0> [ 11.840704] [drm] add ip block number 9 <acp_ip> [ 11.840718] [drm] UVD is enabled in physical mode [ 11.840720] [drm] VCE enabled in physical mode [ 11.853018] [drm] BIOS signature incorrect 0 0 [ 11.853073] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] [ 11.853083] caller pci_map_rom+0x58/0xe0 mapping multiple BARs [ 11.854388] ATOM BIOS: 113-C75100-X30 [ 11.854435] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 11.854442] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 11.854444] amdgpu 0000:00:01.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 11.854453] [drm] Detected VRAM RAM=512M, BAR=512M [ 11.854454] [drm] RAM width 64bits UNKNOWN [ 11.854749] [TTM] Zone kernel: Available graphics memory: 3806630 kiB [ 11.854750] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 11.854751] [TTM] Initializing pool allocator [ 11.854756] [TTM] Initializing DMA pool allocator [ 11.854811] [drm] amdgpu: 512M of VRAM memory ready [ 11.854813] [drm] amdgpu: 3072M of GTT memory ready. [ 11.854826] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 11.854869] [drm] PCIE GART of 1024M enabled (table at 0x000000F400401000). [ 11.871031] Bluetooth: Core ver 2.22 [ 11.871055] NET: Registered protocol family 31 [ 11.871056] Bluetooth: HCI device and connection manager initialized [ 11.871062] Bluetooth: HCI socket layer initialized [ 11.871064] Bluetooth: L2CAP socket layer initialized [ 11.871073] Bluetooth: SCO socket layer initialized [ 11.908620] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 11.908624] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.908628] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.908630] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 11.908632] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 11.908635] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 11.908637] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ 11.908640] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 11.918036] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_pfp.bin [ 11.928956] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_me.bin [ 11.940571] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_ce.bin [ 11.940978] [drm] Chained IB support enabled! [ 11.954617] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 11.962649] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_rlc.bin [ 11.983950] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_mec.bin [ 11.999878] usbcore: registered new interface driver btusb [ 12.050331] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre- cal-pci-0000:02:00.0.bin (-2) [ 12.050338] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 12.050361] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal- pci-0000:02:00.0.bin (-2) [ 12.068137] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/QCA9377/hw1.0/firmware-6.bin (-2) [ 12.075675] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin [ 12.075682] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 12.075684] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [ 12.116360] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.2/sound/card1/input23 [ 12.117338] input: HD-Audio Generic Headphone Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input24 [ 12.132759] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin [ 12.132769] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 12.165705] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/firmware-5.bin [ 12.165721] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810 [ 12.165725] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 [ 12.166747] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.1.0-00002-QCATFSWPZ-5 api 5 features ignore-otp crc32 c3e0d04f [ 12.169858] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_mec2.bin [ 12.218385] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_sdma.bin [ 12.241504] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus- PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input25 [ 12.361780] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA9377/hw1.0/board-2.bin [ 12.362189] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a [ 12.451963] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_sdma1.bin [ 12.479339] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_uvd.bin [ 12.479355] [drm] Found UVD firmware Version: 1.91 Family ID: 11 [ 12.479381] [drm] UVD ENC is disabled [ 12.496248] amdgpu 0000:00:01.0: firmware: direct-loading firmware amdgpu/carrizo_vce.bin [ 12.496257] [drm] Found VCE firmware Version: 52.4 Binary ID: 3 [ 12.500313] [drm] DM_PPLIB: values for Engine clock [ 12.500316] [drm] DM_PPLIB: 300000 [ 12.500316] [drm] DM_PPLIB: 480000 [ 12.500317] [drm] DM_PPLIB: 533340 [ 12.500318] [drm] DM_PPLIB: 576000 [ 12.500318] [drm] DM_PPLIB: 626090 [ 12.500319] [drm] DM_PPLIB: 685720 [ 12.500319] [drm] DM_PPLIB: 720000 [ 12.500320] [drm] DM_PPLIB: 757900 [ 12.500321] [drm] DM_PPLIB: Validation clocks: [ 12.500321] [drm] DM_PPLIB: engine_max_clock: 75790 [ 12.500322] [drm] DM_PPLIB: memory_max_clock: 93300 [ 12.500323] [drm] DM_PPLIB: level : 8 [ 12.500323] [drm] DM_PPLIB: reducing engine clock level from 8 to 0 [ 12.500325] [drm] DM_PPLIB: values for Display clock [ 12.500325] [drm] DM_PPLIB: 300000 [ 12.500326] [drm] DM_PPLIB: 400000 [ 12.500326] [drm] DM_PPLIB: 496560 [ 12.500327] [drm] DM_PPLIB: 626090 [ 12.500327] [drm] DM_PPLIB: 685720 [ 12.500328] [drm] DM_PPLIB: 757900 [ 12.500328] [drm] DM_PPLIB: 800000 [ 12.500329] [drm] DM_PPLIB: 847060 [ 12.500329] [drm] DM_PPLIB: Validation clocks: [ 12.500330] [drm] DM_PPLIB: engine_max_clock: 75790 [ 12.500331] [drm] DM_PPLIB: memory_max_clock: 93300 [ 12.500331] [drm] DM_PPLIB: level : 8 [ 12.500332] [drm] DM_PPLIB: values for Memory clock [ 12.500333] [drm] DM_PPLIB: 667000 [ 12.500333] [drm] DM_PPLIB: 933000 [ 12.500334] [drm] DM_PPLIB: Validation clocks: [ 12.500334] [drm] DM_PPLIB: engine_max_clock: 75790 [ 12.500335] [drm] DM_PPLIB: memory_max_clock: 93300 [ 12.500335] [drm] DM_PPLIB: level : 8 [ 12.500336] [drm] DM_PPLIB: reducing memory clock level from 2 to 0 [ 12.512076] [drm] Display Core initialized with v3.1.44! [ 12.518269] [drm] SADs count is: -2, don't need to read it [ 12.518952] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.518953] [drm] Driver supports precise vblank timestamp query. [ 12.547799] [drm] UVD initialized successfully. [ 12.547857] kvm: Nested Virtualization enabled [ 12.547860] kvm: Nested Paging enabled [ 12.547860] SVM: Virtual VMLOAD VMSAVE supported [ 12.547861] SVM: Virtual GIF supported [ 12.681745] MCE: In-kernel MCE decoding enabled. [ 12.726083] EDAC amd64: Node 0: DRAM ECC disabled. [ 12.726085] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 12.747180] [drm] VCE initialized successfully. [ 12.751421] kfd kfd: Allocated 3969056 bytes on gart [ 12.751444] Topology: Add APU node [0x9874:0x1002] [ 12.751483] kfd kfd: error getting iommu info. is the iommu enabled? [ 12.751492] kfd kfd: Error initializing iommuv2 [ 12.751535] Creating topology SYSFS entries [ 12.751678] kfd kfd: device 1002:9874 NOT added due to errors [ 12.752877] [drm] fb mappable at 0x1FF9DD000 [ 12.752879] [drm] vram apper at 0x1FF000000 [ 12.752880] [drm] size 4325376 [ 12.752881] [drm] fb depth is 24 [ 12.752882] [drm] pitch is 5632 [ 12.752989] fbcon: amdgpudrmfb (fb0) is primary device [ 12.770430] Console: switching to colour frame buffer device 170x48 [ 12.788934] EDAC amd64: Node 0: DRAM ECC disabled. [ 12.788936] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 12.789542] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device [ 12.804977] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:00:01.0 on minor 0 [ 12.980444] ath10k_pci 0000:02:00.0: htt-ver 3.44 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 12.983368] ath: EEPROM regdomain: 0x6c [ 12.983370] ath: EEPROM indicates we should expect a direct regpair map [ 12.983372] ath: Country alpha2 being used: 00 [ 12.983373] ath: Regpair used: 0x6c [ 13.141528] media: Linux media interface: v0.10 [ 13.282599] videodev: Linux video capture interface: v2.00 [ 13.499316] uvcvideo: Found UVC 1.00 device Integrated Webcam (1bcf:2c01) [ 13.517572] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 13.517576] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized! [ 13.517579] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 13.517582] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 13.517713] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input26 [ 13.517846] usbcore: registered new interface driver uvcvideo [ 13.517847] USB Video Class driver (1.1.1) [ 14.623699] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 15.391441] device-mapper: uevent: version 1.0.3 [ 15.391607] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm- de...@redhat.com [ 16.064239] random: crng init done [ 16.064244] random: 7 urandom warning(s) missed due to ratelimiting [ 18.272983] Adding 7820796k swap on /dev/mapper/cryptswap1. Priority:-2 extents:1 across:7820796k FS [ 18.864650] audit: type=1400 audit(1541888868.073:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=545 comm="apparmor_parser" [ 18.887124] audit: type=1400 audit(1541888868.093:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="torbrowser_tor" pid=546 comm="apparmor_parser" [ 18.997639] audit: type=1400 audit(1541888868.205:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=549 comm="apparmor_parser" [ 19.063596] audit: type=1400 audit(1541888868.269:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission- control-5" pid=547 comm="apparmor_parser" [ 19.063605] audit: type=1400 audit(1541888868.269:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=547 comm="apparmor_parser" [ 19.063611] audit: type=1400 audit(1541888868.269:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=547 comm="apparmor_parser" [ 19.063616] audit: type=1400 audit(1541888868.269:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=547 comm="apparmor_parser" [ 19.063622] audit: type=1400 audit(1541888868.269:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=547 comm="apparmor_parser" [ 19.147323] audit: type=1400 audit(1541888868.353:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups- pdf" pid=550 comm="apparmor_parser" [ 19.147330] audit: type=1400 audit(1541888868.353:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=550 comm="apparmor_parser" [ 26.342434] kauditd_printk_skb: 20 callbacks suppressed [ 26.342436] audit: type=1400 audit(1541888875.549:32): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=592 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 26.824873] audit: type=1400 audit(1541888876.033:33): apparmor="DENIED" operation="capable" profile="/usr/bin/freshclam" pid=592 comm="freshclam" capability=12 capname="net_admin" [ 30.584476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.584479] Bluetooth: BNEP filters: protocol multicast [ 30.584488] Bluetooth: BNEP socket layer initialized [ 33.609549] input: lircd-uinput as /devices/virtual/input/input27 [ 43.448743] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 43.544457] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw [ 43.760236] r8169 0000:01:00.0 enp1s0: link down [ 43.760353] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 43.770413] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 44.634219] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 45.506696] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 45.983661] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 50.907746] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 51.318425] aufs: loading out-of-tree module taints kernel. [ 51.326649] aufs 4.18-20180903 [ 55.791758] wlp2s0: authenticate with 60:38:e0:7a:76:12 [ 55.824378] wlp2s0: send auth to 60:38:e0:7a:76:12 (try 1/3) [ 55.826405] wlp2s0: authenticated [ 55.836047] wlp2s0: associate with 60:38:e0:7a:76:12 (try 1/3) [ 55.840182] wlp2s0: RX AssocResp from 60:38:e0:7a:76:12 (capab=0x431 status=0 aid=10) [ 55.843669] wlp2s0: associated [ 55.852564] ath: EEPROM regdomain: 0x8348 [ 55.852567] ath: EEPROM indicates we should expect a country code [ 55.852568] ath: doing EEPROM country->regdmn map search [ 55.852569] ath: country maps to regdmn code: 0x3a [ 55.852570] ath: Country alpha2 being used: US [ 55.852571] ath: Regpair used: 0x3a [ 55.852573] ath: regdomain 0x8348 dynamically updated by country element [ 55.994272] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 64.383629] audit: type=1400 audit(1541888913.589:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1397 comm="apparmor_parser" [ 66.063274] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 66.065007] Bridge firewalling registered [ 66.990093] Initializing XFRM netlink socket [ 67.194094] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 81.135001] Bluetooth: RFCOMM TTY layer initialized [ 81.135023] Bluetooth: RFCOMM socket layer initialized [ 81.135041] Bluetooth: RFCOMM ver 1.11 [ 124.764008] usb 1-1.4: new high-speed USB device number 5 using ehci-pci [ 124.886735] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.00 [ 124.886741] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 124.886745] usb 1-1.4: Product: Cruzer Fit [ 124.886748] usb 1-1.4: Manufacturer: SanDisk [ 124.886750] usb 1-1.4: SerialNumber: 4C530202070309114240 [ 124.964880] usb-storage 1-1.4:1.0: USB Mass Storage device detected [ 124.965355] scsi host2: usb-storage 1-1.4:1.0 [ 124.965559] usbcore: registered new interface driver usb-storage [ 124.973847] usbcore: registered new interface driver uas [ 125.986439] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6 [ 126.012507] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 126.013597] sd 2:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 126.015425] sd 2:0:0:0: [sdb] Write Protect is off [ 126.015429] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 126.017357] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 126.029193] sdb: sdb1 [ 126.039959] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 126.272535] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 128.653810] Could not find key with description: [32cb150b63f5d5e8] [ 128.653817] process_request_key_err: No key [ 128.653818] Could not find valid key in user session keyring for sig specified in mount option: [32cb150b63f5d5e8] [ 128.653821] One or more global auth toks could not properly register; rc = [-2] [ 128.653823] Error parsing options; rc = [-2] [ 134.985865] fuse init (API version 7.27) [ 141.297006] rfkill: input handler disabled [ 176.290013] PM: suspend entry (deep) [ 176.290016] PM: Syncing filesystems ... done. [ 177.274362] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin [ 177.274368] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin [ 177.274396] Freezing user space processes ... (elapsed 0.121 seconds) done. [ 177.396112] OOM killer disabled. [ 177.396113] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 177.397858] Suspending console(s) (use no_console_suspend to debug) [ 177.398641] wlp2s0: deauthenticating from 60:38:e0:7a:76:12 by local choice (Reason: 3=DEAUTH_LEAVING) [ 177.479895] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 177.480030] sd 0:0:0:0: [sda] Stopping disk [ 177.971936] ACPI: EC: interrupt blocked [ 177.991946] acpi device:1a: Cannot transition from D3cold to D3hot [ 177.992109] acpi device:12: Cannot transition from D3cold to D3hot [ 178.011946] ACPI: Preparing to enter system sleep state S3 [ 178.017208] ACPI: EC: event blocked [ 178.017209] ACPI: EC: EC stopped [ 178.017211] PM: Saving platform NVS memory [ 178.017291] Disabling non-boot CPUs ... [ 178.032646] IRQ 41: no longer affine to CPU1 [ 178.033766] smpboot: CPU 1 is now offline [ 178.064714] IRQ 43: no longer affine to CPU2 [ 178.065739] smpboot: CPU 2 is now offline [ 178.096457] IRQ 18: no longer affine to CPU3 [ 178.096466] IRQ 26: no longer affine to CPU3 [ 178.096470] IRQ 28: no longer affine to CPU3 [ 178.096474] IRQ 31: no longer affine to CPU3 [ 178.096481] IRQ 32: no longer affine to CPU3 [ 178.097509] smpboot: CPU 3 is now offline [ 178.102207] ACPI: Low-level resume complete [ 178.102244] ACPI: EC: EC started [ 178.102244] PM: Restoring platform NVS memory [ 178.102318] LVT offset 0 assigned for vector 0x400 [ 178.102614] Enabling non-boot CPUs ... [ 178.102661] x86: Booting SMP configuration: [ 178.102662] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 178.104997] cache: parent cpu1 should not be sleeping [ 178.105081] microcode: CPU1: patch_level=0x06006118 [ 178.105258] CPU1 is up [ 178.105288] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 178.107746] cache: parent cpu2 should not be sleeping [ 178.107845] microcode: CPU2: patch_level=0x06006118 [ 178.108302] CPU2 is up [ 178.108360] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 178.110764] cache: parent cpu3 should not be sleeping [ 178.110860] microcode: CPU3: patch_level=0x06006118 [ 178.111341] CPU3 is up [ 178.111927] ACPI: Waking up from system sleep state S3 [ 178.140454] ACPI: EC: interrupt unblocked [ 178.179367] ACPI: EC: event unblocked [ 178.179986] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 178.184650] sd 0:0:0:0: [sda] Starting disk [ 178.213786] [drm] UVD initialized successfully. [ 178.413903] [drm] VCE initialized successfully. [ 178.414088] r8169 0000:01:00.0 enp1s0: link down [ 178.426321] usb 2-1: reset full-speed USB device number 2 using xhci_hcd [ 178.428642] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci [ 178.616594] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci [ 178.656468] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 178.661242] ata2.00: configured for UDMA/100 [ 178.715579] usb 2-2: reset full-speed USB device number 3 using xhci_hcd [ 178.804585] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci [ 178.965688] acpi LNXPOWER:05: Turning OFF [ 178.965741] OOM killer enabled. [ 178.965741] Restarting tasks ... done. [ 179.039478] PM: suspend exit [ 179.174172] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 179.174175] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111 [ 179.210915] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 180.892697] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 180.896662] ata1.00: configured for UDMA/100 [ 181.834799] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 182.052765] r8169 0000:01:00.0 enp1s0: link down [ 182.052846] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 182.059174] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 182.067147] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 182.074358] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 182.235977] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 187.188948] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 192.135326] wlp2s0: authenticate with 60:38:e0:7a:76:12 [ 192.162910] wlp2s0: send auth to 60:38:e0:7a:76:12 (try 1/3) [ 192.165116] wlp2s0: authenticated [ 192.180831] wlp2s0: associate with 60:38:e0:7a:76:12 (try 1/3) [ 192.186595] wlp2s0: RX AssocResp from 60:38:e0:7a:76:12 (capab=0x431 status=0 aid=8) [ 192.191024] wlp2s0: associated [ 192.200145] ath: EEPROM regdomain: 0x8348 [ 192.200147] ath: EEPROM indicates we should expect a country code [ 192.200148] ath: doing EEPROM country->regdmn map search [ 192.200149] ath: country maps to regdmn code: 0x3a [ 192.200150] ath: Country alpha2 being used: US [ 192.200150] ath: Regpair used: 0x3a [ 192.200152] ath: regdomain 0x8348 dynamically updated by country element [ 192.214100] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 321.160923] usb 2-3: new high-speed USB device number 4 using xhci_hcd [ 321.319001] usb 2-3: New USB device found, idVendor=2972, idProduct=0035, bcdDevice= 1.05 [ 321.319007] usb 2-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 321.319010] usb 2-3: Product: FiiO Q1 [ 321.319013] usb 2-3: Manufacturer: GuangZhou FiiO Electronics Co.,Ltd [ 321.319015] usb 2-3: SerialNumber: FFB14517 [ 324.611237] usb 2-3: 1:3 : unsupported format bits 0x100000000 [ 324.819415] usbcore: registered new interface driver snd-usb-audio [ 326.361759] pulseaudio[2051]: segfault at fffffffffffffff0 ip 00007f7caa8bb906 sp 00007fff6ac1f110 error 5 in libasound.so.2.0.0[7f7caa8ae000+8f000] [ 326.361767] Code: 36 08 00 e8 8c 2c ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 55 53 48 83 ec 08 48 8b 35 13 47 0c 00 48 85 ff 0f 84 0d 01 00 00 <48> 8b 57 20 48 8b 4f 28 48 89 fb 31 ed 48 8d 05 f6 46 0c 00 48 89 [ 327.803101] pulseaudio[3544]: segfault at 51 ip 00007f965056391a sp 00007ffc5cbca870 error 6 in libasound.so.2.0.0[7f9650556000+8f000] [ 327.803108] Code: 55 53 48 83 ec 08 48 8b 35 13 47 0c 00 48 85 ff 0f 84 0d 01 00 00 48 8b 57 20 48 8b 4f 28 48 89 fb 31 ed 48 8d 05 f6 46 0c 00 <48> 89 11 48 89 4a 08 48 39 c6 74 05 48 39 00 74 75 8b 03 85 c0 74 [ 329.213504] pulseaudio[3547]: segfault at fffffffffffffff0 ip 00007f30e2b3b906 sp 00007ffec3480d80 error 5 in libasound.so.2.0.0[7f30e2b2e000+8f000] [ 329.213511] Code: 36 08 00 e8 8c 2c ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 55 53 48 83 ec 08 48 8b 35 13 47 0c 00 48 85 ff 0f 84 0d 01 00 00 <48> 8b 57 20 48 8b 4f 28 48 89 fb 31 ed 48 8d 05 f6 46 0c 00 48 89 [ 330.451686] traps: pulseaudio[3551] general protection ip:7fbb1ef2f5d6 sp:7ffdbe6617a8 error:0 in libasound.so.2.0.0[7fbb1eef6000+8f000] [ 331.698768] traps: pulseaudio[3555] general protection ip:7f91d50c73b9 sp:7ffdc2da0490 error:0 in libasound.so.2.0.0[7f91d508e000+8f000] [ 332.940592] traps: pulseaudio[3558] general protection ip:7f24d3043906 sp:7fff49355f10 error:0 in libasound.so.2.0.0[7f24d3036000+8f000]