Processing commands for [EMAIL PROTECTED]:
> forcemerge 374747 374936
Bug#374747: Failed to start message bus: Failed to read directory
/etc/dbus-1/${prefix}/share/dbus-1/services
Bug#374936: dbus: ~/.xsession-errors
Bug#374812: dbus prevent X11 to start
Forcibly Merged 374747 374812 374936.
>
forcemerge 374747 374936
thanks,
On Thu, Jun 22, 2006 at 08:05:57AM +0200, Christoph Thomas wrote:
> Hi,
>
> I am not shure which package causes the problem.
> I got some error in my ~/.xsession-errors about
> ${prefix}/share/dbus-1/services does not exist (the file is
> overwritten yust n
Package: dbus
Version: 0.62-1
Severity: grave
Justification: renders package unusable
Hi,
I am not shure which package causes the problem.
I got some error in my ~/.xsession-errors about
${prefix}/share/dbus-1/services does not exist (the file is
overwritten yust now, hope my memory is co
On Thu, Jun 22, 2006 at 06:02:18AM +0200, Daniel Baumann wrote:
> Steve Langasek wrote:
> >> On hppa, the package FTBFS due to code errors.
> hppa is, hopefully, fixed with the latest upload.
We'll have to wait until linux-2.6 is fixed on hppa to see, I guess.
> > All three of these failures (an
Package: xmeter
Version: 1.15-6
Severity: grave
Hi Scott,
The current version of xmeter depends on libxaw8, which makes it
uninstallable because libxaw8 no longer exists: this was a short-lived
experiment with xprint support in xaw, which has been dropped upstream in
favor of a return to libxaw7.
Subject: pdnsd: Installation fails
Package: pdnsd
Version: 1.2.4par-0.1
Severity: grave
Justification: renders package unusable
*** Please type your report below this line ***
Attempts to install this package give the following errors:
Selecting previously deselected package pdnsd.
(Reading data
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.19
> severity 342833 important
Bug#342833: debian-installer: Installation on Firewire hard drives fails on
PPC/PowerMac
Severity set to `important' from `grave'
>
End of message, stoppin
Steve Langasek wrote:
>> On hppa, the package FTBFS due to code errors.
hppa is, hopefully, fixed with the latest upload.
> All three of these failures (and now sparc) are caused by the per-flavor
> modules not being available under the names the build is looking for. It
> has nothing to do with
At Fri, 16 Jun 2006 15:01:01 +0700,
Alexey Feldgendler wrote:
> Package: cupsys
> Version: 1.2.1-2
> Severity: grave
>
> When the USB backend process is spawned, its UID is set to 7 (lp), but
> the GID remains 0 (I've checked in /proc//status). This makes CUPS
> incompatible with the default c
Please, reopen this bug. It isn't fixed in sarge.
Sergey N. Voronkov,
Sibitex Ltd.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
It looks like libccscript is obsoleted by libccscript3, it has no
reverse-dependencies in testing (only the RC-buggy bayonne in unstable), and
it fails to build /and/ is uninstallable in unstable. Should this package
be removed from unstable now?
--
Steve Langasek Give me a lev
Package: q-tools
Version: 0.3-1
Severity: grave
Tags: patch
Justification: renders package unusable
As you can see from
http://buildd.debian.org/fetch.php?pkg=q-tools%26ver=0.3-1%26arch=ia64%26stamp=1146456408%26file=log
q-syscollect fails to build, but the package still builds.
Thus q-tools is
Package: varkon
Version: 1.18A-2
Severity: serious
Hello,
There was a problem while autobuilding your package:
> Automatic build of varkon_1.18A-2 on avidan by sbuild/i386 0.47
> Build started at 20060622-0307
...
> dh_testdir
> dh_testroot
> rm -f build-arch-stamp build-indep-stamp configure-st
Processing commands for [EMAIL PROTECTED]:
> forcemerge 370149 374905
Bug#370149: FTBFS: not compatible with FreeType 2.2
Bug#374905: libxfont: FTBFS: FreeType errors
Forcibly Merged 370149 374905.
>
End of message, stopping processing here.
Please contact me if you need assistance.
Debian bug
Package: ttmkfdir
Version: 3.0.9-5
Severity: serious
Hello,
There was a problem while autobuilding your package:
> Automatic build of ttmkfdir_3.0.9-5 on avidan by sbuild/i386 0.47
> Build started at 20060622-0246
> **
.
Package: libxfont
Version: 1:1.0.0-4
Severity: serious
Hello,
There was a problem while autobuilding your package:
> Automatic build of libxfont_1:1.0.0-4 on avidan by sbuild/i386 0.47
> Build started at 2006062
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> severity 338875 serious
Bug#338875: slightly flawed init script stop action behavior
Bug#363635: can't run dpkg-reconfigure mldonkey-server
Severity set to `serious' from `normal'
>
Package: dbus
Version: 0.62-2
Latest build of dbus along with updated libdbus-glib/libdbus-qt appear to
resolve the issue as of today.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> merge 338875 368118
Bug#338875: slightly flawed init script stop action behavior
Bug#368118: mldonkey-server: /etc/init.d/mldonkey stop exits with non-zero code
when server was not r
Le mercredi 21 juin 2006 à 00:22 +0200, Joerg Schilling a écrit :
> If you like to make sure that a suid root cdrecord is able to work
> properly on Linux-2.6.8.1 or newer, you should use a self-compiled
> original source:
>
> ftp://ftp.berlios.de/pub/cdrecord/alpha/
>
> A cdrecord from the origi
Ralf Wildenhues <[EMAIL PROTECTED]> writes:
> What do the other Autoconf developers think about this? Safe enough to
> apply now, or postpone until after 2.60 (and require the APR people to
> keep (ab)using Autoconf internal interfaces, and dragging along a
> modified version of the _AC_INIT_PARS
> any progress on the m68k issue?
m68k is not currently a release-candidate architecture, and moreover the
build failure in question is caused by a broken kernel package on m68k. I
think your priority should be to get the package building on hppa, powerpc,
and sparc instead.
> On hppa, the packa
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.19
> found 374336 0.9.2.24
Bug#374336: Uninstallable due to wrong python dependency
Bug marked as found in version 0.9.2.24.
>
End of message, stopping processing here.
Please contact me
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> reassign 316403 libgconf2-4
Bug#316403: circular dependency between libgconf2-4 and gconf2
Warning: Unknown package 'gconf3'
Bug reassigned from package `gconf3' to `libgconf2-4'.
>
tag 374844 +patch
thanks
On Wednesday 21 June 2006 18:20, you wrote:
> > klineakdef.h:49:38: error: X11/extensions/XKBfile.h: No such file or
> > directory make[3]: *** [klineakdef.o] Error 1
> > make[3]: Leaving directory
This file is in libxkbfile-dev - adding to build-dep makes it build again.
Processing commands for [EMAIL PROTECTED]:
> tag 374844 +patch
Bug#374844: klineakconfig: FTBFS: X11/extensions/XKBfile.h: No such file or
directory
There were no tags set.
Tags added: patch
> thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> tags 374664 + pending
Bug#374664: lablgtk2: FTBFS: Unsatisfiable Build-Depends on obsolete xlibs
There were no tags set.
Tags added: pending
>
End of message, stopping processing her
Processing commands for [EMAIL PROTECTED]:
> tag 373569 + fixed
Bug#373569: grass: FTBFS: Missing Build-Depends on 'libgl1-mesa-swx11-dev'
Tags were: patch
Tags added: fixed
> quit
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(admi
If anyone actually run into this (I don't), can you do some debugging
for me? Try to execute the following commands and post the result here:
grep lplc4 /usr/lib/pkgconfig/*
grep -l lplc4 /usr/lib/**/*.la
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Co
Processing commands for [EMAIL PROTECTED]:
> Version: 6.0.2-2.1
Unknown command or malformed arguments to command.
> tag 373569 - fixed
Bug#373569: grass: FTBFS: Missing Build-Depends on 'libgl1-mesa-swx11-dev'
Tags were: fixed patch
Tags removed: fixed
> thanks
Stopping processing here.
Please
On Tue, 2006-06-20 at 14:24 -0400, Rick Thomas wrote:
> I can confirm this problem ("finish install" doesn't finish the
> install - just flashes the screen and returns to the main menu) when
> installing on a PowerMac G4.
>
> I saw it when installing directly from the June 12 jigdo DVD. I
>
Your message dated Thu, 22 Jun 2006 00:53:45 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Fixed in NMU of grass 6.0.2-2.1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your re
Package: bigloo
Version: 2.7a-1
Severity: serious
bigloo is currently failing to build because it has an unnecessary
build-dependency on free-java-sdk, which is not satisfiable on arm or hppa
right now due to sablevm problems:
[...]
Some packages could not be installed. This may mean that you hav
Steinar H. Gunderson wrote:
> On Tue, Jun 13, 2006 at 12:33:43PM -0400, Nick Lewycky wrote:
>
>>GLEW can't be used with GLUT at the moment. I have freeglut3 3.8.0
>>installed.
>
> There is no such version in the archive; the latest version is 2.4.0-5. Could
> you please recheck this? I'm unable t
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> close 372779 1.2-102.dfsg-2
Bug#372779: egroupware-core: unrevolved dependency in experimental packages
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug ma
Processing commands for [EMAIL PROTECTED]:
> severity 374794 serious
Bug#374794: FTBFS: missing libnspr4-dev
Severity set to `serious' from `grave'
> thanks
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system administrator
(administrator, Debian Bugs d
On Wednesday 21 June 2006 22:26, you wrote:
> However, I think the issue is not present in the 4.0.16 versions
> (according to my tests and according to the code).
>
> Can somebody else confirm?
Confirmed. If I do a new install of unstable, the mail spool dir is clean.
pgp3pZbjlwzC1.pgp
Descript
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> reassign 369988 libgtk-java
Bug#369988: package depends on old libgcj6 library
Bug reassigned from package `libgtk-jni' to `libgtk-java'.
>
End of message, stopping processing here.
Processing commands for [EMAIL PROTECTED]:
> tag 373508 + fixed
Bug#373508: Python policy transition
Tags were: patch
Tags added: fixed
> tag 374177 + fixed
Bug#374177: pytables: FTBFS: should build-dep on python-numarray
There were no tags set.
Tags added: fixed
> tag 374799 + fixed
Bug#374799:
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> reassign 369989 libgtk-java
Bug#369989: package depends on old libgcj6 library
Bug reassigned from package `libgnome-jni' to `libgtk-java'.
>
End of message, stopping processing here
Your message dated Mon, 19 Jun 2006 23:59:30 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Fixed in NMU of plib 1.8.4-3.1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your res
On 20 Jun 2006, Colin Watson verbalised:
> It's dual-licensed upstream; I contacted upstream years ago about
> this issue (before it became particularly public that Debian had a
> problem with the licence) and arranged for the following statement
> to be added to the top-level LICENSES file:
>
> A
Your message dated Wed, 21 Jun 2006 14:33:09 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374076: fixed in python-mode 1:1.0-2
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is no
Processing commands for [EMAIL PROTECTED]:
> package graphviz
Ignoring bugs not assigned to: graphviz
> tags 373254 + patch
Bug#373254: fails to build from source in unstable
There were no tags set.
Tags added: patch
> thanks
Stopping processing here.
Please contact me if you need assistance.
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> reassign 316403 gconf3
Bug#316403: circular dependency between libgconf2-4 and gconf2
Warning: Unknown package 'gconf3'
Bug reassigned from package `libgconf2-4' to `gconf3'.
>
End o
Your message dated Wed, 21 Jun 2006 14:33:09 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#372294: fixed in python-mode 1:1.0-2
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is no
Your message dated Wed, 21 Jun 2006 23:43:58 +0200
with message-id <[EMAIL PROTECTED]>
and subject line [Pkg-openldap-devel] Bug#365409: slapd: segfaults on entry
modify
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If thi
package graphviz
tags 373254 + patch
thanks
Hi,
I've attached to this mail a patch to fix this problem.
--
Florent
--- graphviz-2.8/debian/rules.old 2006-06-21 22:58:58.0 +0200
+++ graphviz-2.8/debian/rules 2006-06-21 23:09:35.0 +0200
@@ -66,11 +66,11 @@
rmdir $(CURDIR)/debian
Your message dated Wed, 21 Jun 2006 14:32:25 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374851: fixed in html-helper-mode 3.0.4kilo-2
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case
Your message dated Wed, 21 Jun 2006 14:33:16 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374801: fixed in python-scientific 2.4.9-6
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it
Your message dated Wed, 21 Jun 2006 14:33:19 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374661: fixed in sip4-qt3 4.4.5-1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now y
Your message dated Wed, 21 Jun 2006 14:33:12 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374222: fixed in python-reportlab 1.20debian-7
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the cas
Your message dated Wed, 21 Jun 2006 14:33:09 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374076: fixed in python-mode 1:1.0-2
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is no
Package: gimp-dimage-color
Version: 1.1.0-2
Severity: grave
Justification: renders package unusable
The latest version of the gimp package does not Provides: gimp2.0 any
more. This makes gimp-dimage-color uninstallable, because it depends on
gimp2.0. I suggest you replace it by a versioned depende
On Wed, Jun 21, 2006 at 05:15:07PM +0200, Pierre Morin wrote:
> It doesn't seem to be a problem for other distros,
> does it ?
Other distros ship non-free software and violate license conditions in free
software. And your point is?
Regards
Javier
signature.asc
Description: Digital signature
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.19
> severity 374821 important
Bug#374821: startx crashes after dist-upgrade
Severity set to `important' from `grave'
>
End of message, stopping processing here.
Please contact me if you
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> reassign 372244 python-central
Bug#372244: python-serial: cannot install ("loop over non-sequence")
Bug reassigned from package `python-serial' to `python-central'.
>
End of message,
ild/buildd/kmymoney2-0.8.4/obj-s390-linux-gnu'
> make: *** [common-install-impl] Error 2
> **
> Build finished at 20060621-1246
> FAILED [dpkg-buildpackage died]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
fixed 372576 0.10-2
quit
On Sat, Jun 10, 2006 at 01:18:37PM +0200, Xavier Queralt Mateu wrote:
> Package: monodevelop
> Version: 0.10-1
> Severity: important
>
> Monodevelop package depend on libmono-cecil3.0-cil but apt changes it for
> libmono-cecil4.0-cil which don't let you run monodevelop.
On Wed, Jun 21, 2006 at 09:57:04PM +0200, Nicolas François wrote:
> Note: I still don't understand the Debian bug and can't reproduce it. I
> will look closer later.
I checked the code of 4.0.15-10.
The bug is present in this version.
However, I think the issue is not present in the 4.0.16 versio
Tomasz,
On Wed, Jun 21, 2006 at 10:55:36AM +0100, Stephen Gran wrote:
> Hey all,
>
> I think I might have found the problem. The mail spool is open()ed, and
> then the fd is checked to see if there is an error (as is proper). The
> problem is, the fchown/fchmod calls happen in the same logic pa
On Tue, Jun 20, 2006 at 04:40:53PM +0200, Steinar H. Gunderson wrote:
> On Mon, Jun 19, 2006 at 08:57:02PM +0200, Steinar H. Gunderson wrote:
> > After some discussion on IRC, here's the updated patch.
>
> One change is needed yet; the current code in debconf-copydb simply turns off
> i18n support
Package: autopartkit
Severity: grave
Hi
The second problem with autopartkit raises up when it tries to
call the print_list() function. As far as I can see it goes into the
if-clause and then gets a segmentation fault.
I need to do some further debugging to provide a patch, but I wanted
to report
* Justin Erenkrantz wrote on Mon, Jun 19, 2006 at 06:17:49PM CEST:
> On 6/19/06, Tollef Fog Heen <[EMAIL PROTECTED]> wrote:
> >| > On 6/18/06, Tollef Fog Heen <[EMAIL PROTECTED]> wrote:
> >| > >Currently, if configure is passed --sbindir=, it just overrides
> >| > >$sbindir without flagging that at
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.19
> severity 374768 normal
Bug#374768: gftp: segfaults on recursive downloads
Severity set to `normal' from `grave'
>
End of message, stopping processing here.
Please contact me if you
Package: tinyerp-server
Version: 3.3.0-1
Severity: grave
Justification: renders package unusable
Hi,
It's me again :)
-
# /usr/sbin/tinyerp-server
Traceback (most recent call last):
File "./tinyerp-server.py", line 59, in ?
import netsvc
Responsible dbusus-launch that is incorrectly compiled.
--
__
/ ` Eric Valette
/-- __ o _. 6 rue Paul Le Flem
(___, / (_(_(__ 35740 Pace
Tel: +33 (0)2 99 85 26 76 Fax: +33 (0)2 99 85 26 76
E-mail: [EMAIL PROTECTED]
--
Your message dated Wed, 21 Jun 2006 11:47:08 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#374651: fixed in mancala 1.0.0-9
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now yo
A reference to ${prefix} in /etc/dbus-1/session.conf is not being
expanded, causing the problem.
To work around until this is fixed, edit /etc/X11/Xsession.options and
comment out the line saying "use-session-dbus".
--Ken Bloom
--
I usually have a GPG digital signature included as an attachment
On Tue, 2006-06-20 at 20:07 +0200, Karl Bartel wrote:
> I just uploaded a new release. The code worked out quite different
> than in the patch, because I wanted to add a "Sound on/off" switch
> without adding an additional conditional around each line where a
> sound is played. This bug shoul
Your message dated Wed, 21 Jun 2006 20:27:22 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Fixed in NMU of grace6 5.99.0+final-12.1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is no
Processing commands for [EMAIL PROTECTED]:
> Version: 5.99.0+final-12.1
Unknown command or malformed arguments to command.
> tag 373568 - fixed
Bug#373568: grace6: FTBFS: No rule to make target
`/usr/X11R6/include/X11/Intrinsic.h', needed by `main.o
Tags were: fixed patch
Tags removed: fixed
>
Package: tinyerp-client
Version: 3.3.0-1
Severity: grave
Justification: renders package unusable
Hi,
Thanks for packaging tinyerp.
Today I wanted to give the new 3.3 a try, but failed. tinyerp-client crashes
with traceback on startup:
--
$ tinyerp-client
On Wed, Jun 21, 2006 at 07:04:42PM +0200, Olaf van der Spek wrote:
>
> So how should one fix this situation?
> apt-get dist-upgrade doesn't fix it.
You have various options:
- Run /etc/init.d/ntp-server start, so that stopping it works.
- Edit the /etc/init.d/ntp-server script, and add a --oknodo
Your message dated Wed, 21 Jun 2006 18:10:42 +0200
with message-id <[EMAIL PROTECTED]>
has caused the Debian Bug report #374705,
regarding adduser: creates incorrect mail spool files during new installation
to be marked as having been forwarded to the upstream software
author(s) Tomasz Kłoczko <[EM
Processing commands for [EMAIL PROTECTED]:
> tag 373568 + fixed
Bug#373568: grace6: FTBFS: No rule to make target
`/usr/X11R6/include/X11/Intrinsic.h', needed by `main.o
Tags were: patch
Tags added: fixed
> quit
Stopping processing here.
Please contact me if you need assistance.
Debian bug tra
Package: html-helper-mode
Version: 3.0.4kilo-1
Severity: grave
Tags: patch
Something went wrong when you applied my patch for #374587, since
there is a closing parenthesis missing in line 17 of
/etc/emacs/site-start.d/50html-helper-mode.el. The result is an error
message during Emacs' start ("Er
Hi!
* LI Daobing <[EMAIL PROTECTED]> [060317 08:02]:
> I have upload a new version to mentors [1], now I am waiting for a
> sponsor to upload it.
>
> [1] http://mentors.debian.net/debian/pool/main/q/qterm/
Since the link doesn't work, and you didn't reacted on this release
critical bug for qu
Processing commands for [EMAIL PROTECTED]:
> tag 355663 + fixed
Bug#355663: FTBFS with G++ 4.1: qtermhttp.cpp:94: error: unknown escape
sequence '\='
Tags were: pending patch
Tags added: fixed
> quit
Stopping processing here.
Please contact me if you need assistance.
Debian bug tracking system
Hello,
I used gftp-gtk. Since a few months, the crashes are very rare. I always
used the latest version available in SID. Now, it's 2.0.18.
When I realized the crashes do not occur as often as before, I decided
to use gftp again.
Thanks.
Nicolas.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Debian Bug Tracking System wrote:
So, it's the version 8.2 that failed to stop at this point.
dpkg - trying script from the new package instead ...
Stopping NTP server: ntpdinvoke-rc.d: initscript ntp-server, action "stop"
failed.
This is the new version of the prerm script, but not the new
Processing commands for [EMAIL PROTECTED]:
> tag 328039 + fixed
Bug#328039: FTBFS: Uses unsupported -fwritable-strings option
There were no tags set.
Tags added: fixed
> tag 359587 + fixed
Bug#359587: varkon: please finish /usr/doc transition
There were no tags set.
Tags added: fixed
> tag 35959
Processing commands for [EMAIL PROTECTED]:
> close 314923 5.99.0+final-12
Bug#314923: grace6: xmgrace exits with "Broken or incomplete installation -
read the FAQ!"
'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing.
Bug#334019: grace: fails immediately with error "Broken or
Hi,
The path to pymacs.el is changed to /usr/share/emacs/site-lisp/pymacs. I
think that the install script of python-mode should be modified to follow it.
Following is a patch doing this:
--- /usr/lib/emacsen-common/packages/install/python-mode2006-03-05
23:25:11 +0800
+++ /tmp/python-mode
clone 355743 -1
retitle -1 "FTBFS on powerpc: no defconfig"
tags -1 +patch
thanks
Hi!
* Martin Michlmayr <[EMAIL PROTECTED]> [060307 17:30]:
> Your package no longer builds on mips (and mipsel). This is a
> regression and therefor a serious (RC) bug.
[..]
> You either need to add defconfigs for
Processing commands for [EMAIL PROTECTED]:
> clone 355743 -1
Bug#355743: FTBFS on mips: no defconfig
Bug 355743 cloned as bug 374846.
> retitle -1 "FTBFS on powerpc: no defconfig"
Bug#374846: FTBFS on mips: no defconfig
Changed Bug title.
> tags -1 +patch
Bug#374846: "FTBFS on powerpc: no defcon
Your message dated Wed, 21 Jun 2006 09:17:21 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#373707: fixed in kmymoney2 0.8.4-3
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
Your message dated Wed, 21 Jun 2006 18:29:55 +0200
with message-id <[EMAIL PROTECTED]>
and subject line [pkg-ntp-maintainers] Bug#374777: ntp-server: init scripts
fails on upgrade and upgrade fails
has caused the attached Bug report to be marked as done.
This means that you claim that the problem
Hi, I found the path to pymacs.el is changed in pymacs package. If the install
script of python-mode follows the change, the bug will be fixed:
--- /usr/lib/emacsen-common/packages/install/python-mode2006-03-05
23:25:11 +0800
+++ /tmp/python-mode2006-06-22 00:16:17 +0800
@@ -44,7 +44,
Package: klineakconfig
Version: 0.8-beta2-6
Severity: serious
Hello,
There was a problem while autobuilding your package:
> Automatic build of klineakconfig_0.8-beta2-6 on avidan by sbuild/i386 0.47
> Build started at 2006062
Your message dated Wed, 21 Jun 2006 17:50:28 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#326902: fixed in libmpcdec 1.2.1-2
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now
On Tue, Jun 13, 2006 at 12:33:43PM -0400, Nick Lewycky wrote:
> GLEW can't be used with GLUT at the moment. I have freeglut3 3.8.0
> installed.
There is no such version in the archive; the latest version is 2.4.0-5. Could
you please recheck this? I'm unable to reproduce your bug with the latest
fr
Your message dated Wed, 21 Jun 2006 08:17:07 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#372586: fixed in cupsys 1.2.1-3
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now you
Your message dated Wed, 21 Jun 2006 08:17:08 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#373839: fixed in cupsys 1.2.1-3
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now you
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> package kmymoney2
Ignoring bugs not assigned to: kmymoney2
> tags 373707 + pending
Bug#373707: kmymoney2: FTBFS in sid (problem with kbanking)
Tags were: patch
Tags added: pending
>
Your message dated Wed, 21 Jun 2006 08:17:07 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#372696: fixed in cupsys 1.2.1-3
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now you
Reading Debian bug #324978 :
Let us wait it to be 365 days old to wonder why this
300 days old RC bug is not squashed and prevents GPL
vlc entering Etch ;-)
It doesn't seem to be a problem for other distros,
does it ?
PM
_
Hi!
Attached is the diff for -1.1 NMU I'm just uploading.
Yours sincerely,
Alexander
diff -Nur showimg-0.9.5-org/debian/changelog showimg-0.9.5/debian/changelog
--- showimg-0.9.5-org/debian/changelog 2006-06-21 16:05:32.0 +0200
+++ showimg-0.9.5/debian/changelog 2006-06-21 15:26:1
Processing commands for [EMAIL PROTECTED]:
> # Automatically generated email from bts, devscripts version 2.9.20
> severity 374619 grave
Bug#374619: evolution-exchange: Not responding to evolution, excessive memory
consuption
Severity set to `grave' from `important'
>
End of message, stopping pr
On Tue, Jun 20, 2006 at 10:40:13PM +0200, Josselin Mouette wrote:
> Le mercredi 21 juin 2006 à 02:26 +1000, Anand Kumria a écrit :
> > nautilus-cd-burner fails to call cdrecord correctly; and thus fails to
> > burn an ISO image.
>
> > [pid 16804] --- SIGCHLD (Child exited) @ 0 (0) ---
> > [pid 168
1 - 100 of 162 matches
Mail list logo
