Package: pbuilder
Version: 0.217
Severity: serious
Justification: Policy 6.6(4)
pbuilder and pbuilder-uml both ship copies of some files that belong
only in the latter, which is consequently uninstallable without
--force-overwrite:
/etc/pbuilder/pbuilder-uml.conf
I'm using Iceweasel/release on Debian/Jessie and had the same error after
the last Iceweasel upgrade (40.0.3-3 => 41.0-1).
In fact, NoScript was reported as "not compatible with v41" in
about:addons and I could not even re-enable it after I disabled it
temporarily to try to get the menu back
For some reason, I didn't see your bug until I got a removal request from
testing. Sorry.
On Sunday, September 20, 2015 19:17:05 Alf Gaida wrote:
> Source: kde-config-systemd
> Severity: serious
> Tags: patch
> Justification: fails to build from source (but built successfully in the
> past)
>
>
Control: fixed -1 1.8.8-1.1
Closing.
Processing control commands:
> fixed -1 1.8.8-1.1
Bug #798436 [src:odin] odin: please make it build with vtk6 (or at least
vtk-5.10)
Marked as fixed in versions odin/1.8.8-1.1.
--
798436: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=798436
Debian Bug Tracking System
Contact
[ Adding debian-b...@lists.debian.org back. ]
Ritesh Raj Sarraf (2015-09-28):
> Adding systemd maintainers
>
>
> Hello Cyril,
>
> THank you for the bug report.
>
>
> On Fri, 2015-09-25 at 11:59 +0200, Cyril Brulebois wrote:
> > Package: multipath-udeb
> > Version:
Processing commands for cont...@bugs.debian.org:
> clone 800371 -1
Bug #800371 [src:glibmm2.4] glibmm2.4: C++11 features in headers but no
-std=c++11 in pkg-config
Bug 800371 cloned as bug 800399
> reassign -1 libsigc++-2.0
Bug #800399 [src:glibmm2.4] glibmm2.4: C++11 features in headers but no
Your message dated Mon, 28 Sep 2015 19:04:04 +
with message-id
and subject line Bug#800123: fixed in libfile-rsync-perl 0.48-2
has caused the Debian Bug report #800123,
regarding libfile-rsync-perl: Missing dependency on libipc-run3-perl
to be marked as
Adding systemd maintainers
Hello Cyril,
THank you for the bug report.
On Fri, 2015-09-25 at 11:59 +0200, Cyril Brulebois wrote:
> Package: multipath-udeb
> Version: 0.5.0+git0.770e6d0d-3
> Severity: grave
> Justification: renders package unusable
>
>
> [ Please keep
On Mon, 2015-09-28 at 18:53 +0200, Cyril Brulebois wrote:
> [ Adding debian-b...@lists.debian.org back. ]
>
Sorry about that.
> > This was intentionally done because upstream added systemd
> > dependency
> > some time ago. For Jessie, I had disabled systemd support, but now,
> > it
> > makes
Processing commands for cont...@bugs.debian.org:
> close 798436
Bug #798436 [src:odin] odin: please make it build with vtk6 (or at least
vtk-5.10)
Marked Bug as done
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
798436:
Source: pycuda
Version: 2015.1.2-1
Tags: sid stretch
Severity: serious
Hi,
pycuda needs to be rebuilt to pick a dependency on boost 1.58 instead of boost
1.58. This seems to require manual uploads instead of binNMUs due to the
build-dependency on non-free packages.
Emilio
On Sun, 27 Sep 2015 02:07:09 -0400 Scott Kitterman
wrote:
> Package: python3-babeltrace
> Version: 1.2.4-2
> Severity: grave
> Justification: renders package unusable
>
> I haven't had time to investigate at all yet, but here's part of the file
list
> following today's
Processing commands for cont...@bugs.debian.org:
> tags 800123 + pending
Bug #800123 [libfile-rsync-perl] libfile-rsync-perl: Missing dependency on
libipc-run3-perl
Added tag(s) pending.
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
800123:
Processing commands for cont...@bugs.debian.org:
> #
> # bts-link upstream status pull for source package src:d-feet
> # see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html
> #
> user bts-link-upstr...@lists.alioth.debian.org
Setting user to
Processing commands for cont...@bugs.debian.org:
> #
> # bts-link upstream status pull for source package src:mesa-demos
> # see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html
> #
> user bts-link-upstr...@lists.alioth.debian.org
Setting user to
Processing control commands:
> reassign -1 libfile-rsync-perl 0.48-1
Bug #800123 [unburden-home-dir] unburden-home-dir: Missing dependency:
libipc-run3-perl
Bug reassigned from package 'unburden-home-dir' to 'libfile-rsync-perl'.
No longer marked as found in versions unburden-home-dir/0.3.3.
Ritesh Raj Sarraf (2015-09-28):
> Hmmm... I'll look into it later. But when you say "No systemd in d-i",
> does it mean that is how it is going to remain ?
I'm not sure why there would be a need to change that in the near
future.
Mraw,
KiBi.
signature.asc
Description: Digital
Processing commands for cont...@bugs.debian.org:
> notfound 789670 python-future
Bug #789670 {Done: Scott Kitterman }
[python-future,python-pies2overrides] python-future,python-pies2overrides:
error when trying to install together
There is no source info for the package
Processing commands for cont...@bugs.debian.org:
> close 798436
Bug #798436 {Done: Gianfranco Costamagna }
[src:odin] odin: please make it build with vtk6 (or at least vtk-5.10)
Bug 798436 is already marked as done; not doing anything.
> thanks
Stopping processing
Source: python-numpy
Version: 1:1.9.2-2
Severity: serious
Justification: fails to build from source (but built successfully in the past)
Here's the build-log excerpt:
test_basic (test_multiarray.TestChoose) ... ok
test_broadcast1 (test_multiarray.TestChoose) ... ok
test_broadcast2
I assume, the software is ok but the test automation is not. The
'algorithm under test' gives a bit fuzzy results depending on the
multicore calling order and depending on numerical rounding issues.
Therefore the automated tests accept results within a range of plausible
values. Seems that
n/rules:7: recipe for target 'build-arch' failed
dpkg-buildpackage: error: debian/rules build-arch gave error exit status 2
────
Build finished at 20150928-2128
Scott K
Hi
On 2015-09-28 18:17, Andreas Cadhalpun wrote:
> Hi Aurelien,
>
> On 28.09.2015 14:48, Aurelien Jarno wrote:
> > On 2015-09-27 23:43, Andreas Cadhalpun wrote:
> >> A slightly larger test case for mips is compiling ffmpeg...
> >
> > It what I did to test if the failure is due to the above
Cyril Brulebois (2015-09-28):
> Package: libpango1.0-udeb
> Version: 1.38.0-1
> Severity: grave
> Justification: renders package unusable
>
> [ Please keep debian-b...@lists.debian.org in copy. ]
>
> Hi,
>
> Your package is no longer installable since it gained a dependency on
Hi.
The following trivial patch undoes the failed conversion from
dh_pysupport to dh_python2 and does not change anything else.
I suggest an upload with urgency=high. There will be plenty of time to
do the dh-python2 thing "right" afterwards.
Thanks.diff -ru 333/debian/control
Dear Andreas,
On Mon, Sep 28, 2015 at 4:02 PM, Andreas Tille wrote:
> Hi Mathieu,
>
> On Tue, Sep 15, 2015 at 09:32:14AM +0200, Mathieu Malaterre wrote:
>> Package: dcmtk
>> Version: 3.6.1~20150629-1
>> Severity: grave
>> Justification: causes non-serious data loss
>>
>> As
Processing control commands:
> forwarded -1 https://bugzilla.gnome.org/show_bug.cgi?id=755750
Bug #800371 [src:glibmm2.4] glibmm2.4: C++11 features in headers but no
-std=c++11 in pkg-config
Set Bug forwarded-to-address to
'https://bugzilla.gnome.org/show_bug.cgi?id=755750'.
--
800371:
Control: forwarded -1 https://bugzilla.gnome.org/show_bug.cgi?id=755750
--
Why is it that all of the instruments seeking intelligent life in the
universe are pointed away from Earth?
signature.asc
Description: OpenPGP digital signature
Your message dated Mon, 28 Sep 2015 15:39:05 +
with message-id
and subject line Bug#800356: fixed in pango1.0 1.38.0-3
has caused the Debian Bug report #800356,
regarding libpango1.0-udeb: not installable: depends on libthai0
to be marked as done.
This
Source: glibmm2.4
Version: 2.46.1-1
Severity: serious
glibmm2.4 version 2.46.1-1 started to use C++11 features in the headers
it exports, but pkg-config --cflags doesn't return -std=c++11. Given the
default is still -std=gnu++98 in GCC 5, it causes packages which use
these headers to fails to
2015-09-24 15:14 GMT+02:00 Daniel Pocock :
> Can anybody from the JsSIP team comment on this? How do you feel about
> having node-nan 2.x in the dependency hierarchy? Will you continue
> using node-websocket or would you possibly use node-ws[1] instead?
> Using node-ws instead
Hi Aurelien,
On 28.09.2015 14:48, Aurelien Jarno wrote:
> On 2015-09-27 23:43, Andreas Cadhalpun wrote:
>> A slightly larger test case for mips is compiling ffmpeg...
>
> It what I did to test if the failure is due to the above changes.
> ffmpeg builds fine with gcc version 5.2.1-17 and
Your message dated Mon, 28 Sep 2015 15:43:57 +
with message-id
and subject line Bug#796488: fixed in pyzor 1:0.5.0-4
has caused the Debian Bug report #796488,
regarding pyzor: Missing binary pyzor in 0.5.0-3
to be marked as done.
This means that you claim
Your message dated Mon, 28 Sep 2015 16:00:39 +
with message-id
and subject line Bug#799653: fixed in vxl 1.17.0.dfsg2-2
has caused the Debian Bug report #799653,
regarding vxl: ABI transition needed for libstdc++ v5
to be marked as done.
This means that
Hi Mathieu,
On Tue, Sep 15, 2015 at 09:32:14AM +0200, Mathieu Malaterre wrote:
> Package: dcmtk
> Version: 3.6.1~20150629-1
> Severity: grave
> Justification: causes non-serious data loss
>
> As describe in the previous bug report:
>
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=715011#50
Your message dated Mon, 28 Sep 2015 16:09:16 +0200
with message-id <20150928140916.ga2...@fatal.se>
and subject line "fixed" in 1.38.0-1
has caused the Debian Bug report #800357,
regarding pango1.0: FTBFS on buildds: test failures
to be marked as done.
This means that you claim that the problem
Package: pbuilder
Version: 0.217
Severity: serious
Since this new release brings a *lot* of bugfixes (more than 27 bugs fixed) and
many of them might cause breakages in non-standard system configurations with
custom hook
scripts [1], together with Mattia, the new pbuilder maintainer, we think
Your message dated Mon, 28 Sep 2015 16:00:35 +
with message-id
and subject line Bug#799641: fixed in ppl 1:1.1-7
has caused the Debian Bug report #799641,
regarding ppl: ABI transition needed for libstdc++ v5
to be marked as done.
This means that you
Just one precison, I'm using GDM (not sddm) and have the same issue.
--
Pascal Obry / Magny Les Hameaux (78)
The best way to travel is by means of imagination
http://v2p.fr.eu.org
http://www.obry.net
gpg --keyserver keys.gnupg.net --recv-key F949BD3B
Hi Niels, Bob, others,
On Fri, Sep 25, 2015 at 8:34 AM, Niels Thykier wrote:
> Thanks for getting it uploaded to NEW.
>
> I have prodded the FTP masters about fast tracking and will try to
> finish the resulting transition as fast as possible. :)
Now it's accepted, built fine
Guy Roussin wrote:
> Hi,
>
> adduser sddm video
> adduser Debian-gdm video
>
Hi,
this also fixes the problem with gdm 3.14.2-2 and glx-diversions 0.6.0 .
One should thus open a bug for a package which forgets to implement this
user addition (upon an
On 2015-09-28 08:46, László Böszörményi (GCS) wrote:
> Hi Niels, Bob, others,
Hi,
> On Fri, Sep 25, 2015 at 8:34 AM, Niels Thykier wrote:
> > Thanks for getting it uploaded to NEW.
> >
> > I have prodded the FTP masters about fast tracking and will try to
> > finish the
Processing commands for cont...@bugs.debian.org:
> reassign 800322 open-vm-tools-dkms
Bug #800322 [open-vm-tools] X32 enabled kernel and "Build of vmhgfs.ko failed
for: 4.2.0-1-amd64 (x86_64)"
Bug reassigned from package 'open-vm-tools' to 'open-vm-tools-dkms'.
No longer marked as found in
Your message dated Mon, 28 Sep 2015 11:34:54 +
with message-id
and subject line Bug#792920: fixed in uqm 0.6.2.dfsg-9.1
has caused the Debian Bug report #792920,
regarding uqm: FTBFS due to missing -lm
to be marked as done.
This means that you claim that
Source: pango1.0
Version: 1.38.0-1
Severity: serious
Justification: ftbfs
Hi,
Your package FTBFS on all buildds, with test failures. Example on i386:
| /usr/bin/make testboundaries testboundaries_ucd testcolor testscript
markup-parse test-layout test-font testattributes testiter
Package: libpango1.0-udeb
Version: 1.38.0-1
Severity: grave
Justification: renders package unusable
[ Please keep debian-b...@lists.debian.org in copy. ]
Hi,
Your package is no longer installable since it gained a dependency on a
library package which has no udeb variant: libthai0.
This makes
Processing commands for cont...@bugs.debian.org:
> tags 788062 + pending
Bug #788062 [os-prober] os-prober corrupts LVs/partitions while being mounted
inside a VM
Added tag(s) pending.
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
788062:
All the xgreeters?
I had this bug on the 24th or 25th, and fixed it with Guy's comment
straight away.
Using lightdrm, so:
adduser lightdm video
Made a post in the Debian user forums:
http://forums.debian.net/viewtopic.php?f=6=124950=83476f324bbbe81da6526c1eea2f916d
Regards,
Gernot Hassenpflug
Your message dated Mon, 28 Sep 2015 09:24:08 +
with message-id
and subject line Bug#752615: fixed in moodle 2.7.10+dfsg-1
has caused the Debian Bug report #752615,
regarding moodle is licensed under the PHP license and is not PHP
to be marked as done.
Your message dated Mon, 28 Sep 2015 09:24:08 +
with message-id
and subject line Bug#799634: fixed in moodle 2.7.10+dfsg-1
has caused the Debian Bug report #799634,
regarding moodle: CVE-2015-5264 CVE-2015-5265 CVE-2015-5266 CVE-2015-5267
CVE-2015-5268
Your message dated Mon, 28 Sep 2015 09:24:08 +
with message-id
and subject line Bug#746594: fixed in moodle 2.7.10+dfsg-1
has caused the Debian Bug report #746594,
regarding Embedded OLE is not DFSG-compliant (PHP-2.02)
to be marked as done.
This means
Just FYI:
[How to automount optical media on Debian Linux for Kodi]
https://ddumont.wordpress.com/2015/09/27/how-to-automount-optical-media-on-debian-linux-for-kodi/
Processing commands for cont...@bugs.debian.org:
> fixed 796310 1.3.21-4
Bug #796310 {Done: Laszlo Boszormenyi (GCS) }
[src:graphicsmagick] libgraphicsmagick3: --with-quantum-depth=16 breaks ABI
Marked as fixed in versions graphicsmagick/1.3.21-4.
> thanks
Stopping processing
Package: synaptic
Version: 0.81.4+b2
Severity: grave
Dear maintainer,
* What led to this situation?
A failed install of a Java package from Oracle.
* What exactly did you do?
Purged package completely and reinstalled after reboot, issue persists.
-- System Information:
Debian Release:
Processing commands for cont...@bugs.debian.org:
> reassign 796310 src:graphicsmagick 1.3.20-4
Bug #796310 {Done: Laszlo Boszormenyi (GCS) }
[libgraphicsmagick3] libgraphicsmagick3: --with-quantum-depth=16 breaks ABI
Bug reassigned from package 'libgraphicsmagick3' to
reassign 796310 src:graphicsmagick 1.3.20-4
fixed 796310 src:graphicsmagick 1.3.21-4
thanks
Hi,
Since libgraphicsmagick3 no longer exists, the BTS gets confused and thinks this
bug isn't fixed, and so britney won't attempt to migrate graphicsmagick:
Updating libgraphicsmagick3 introduces
clone 800371 -1
reassign -1 libsigc++-2.0
retitle -1 libsigc++-2.0: C++11 features in headers but no -std=c++11 in
pkg-config
thanks
On 2015-09-28 16:59, Aurelien Jarno wrote:
> Source: glibmm2.4
> Version: 2.46.1-1
> Severity: serious
>
> glibmm2.4 version 2.46.1-1 started to use C++11
Raphaël Hertzog writes:
> Package: libuhd003
> Version: 3.9.0-1
> Severity: serious
> User: de...@kali.org
> Usertags: origin-kali
>
> I just noticed that with uhd 3.9.0 libuhd003 lost the v5 suffix that had
> been introduced with 3.8.5-2.1.
>
> And the changelog has no explanation for
Processing commands for cont...@bugs.debian.org:
> reassign 789955 iceweasel
Bug #789955 [devscripts] devscripts: [bts] "bts show" command displays error:
(process:29614): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size
== 0' failed
Bug reassigned from package 'devscripts' to
On 2015-09-27 23:43, Andreas Cadhalpun wrote:
> Hi Aurelien,
>
> On 27.09.2015 23:10, Aurelien Jarno wrote:
> > On 2015-09-27 20:37, Andreas Cadhalpun wrote:
> > Thanks for the detailed testcase. I have been able to reproduce the
> > issue on mipsel, but not on mips.
>
> Indeed, this test case
Processing control commands:
> severity -1 important
Bug #797132 [gobject-introspection] gobject-introspection: missing -fPIC option
when compiling
Severity set to 'important' from 'serious'
--
797132: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=797132
Debian Bug Tracking System
Contact
Control: severity -1 important
Samuel Thibault, le Fri 28 Aug 2015 03:26:01 +0200, a écrit :
> linking of temporary binary failed: Command '['/bin/bash', '../libtool',
> '--mode=link', '--tag=CC', 'cc', '-o',
> '/tmp/buildd/at-spi2-core-2.16.0/atspi/tmp-introspect9yGBBn/Atspi-2.0',
>
Dear Pierre,
Le vendredi 25 septembre 2015 à 13:24 +0200, Pierre Saramito a écrit :
> I just commit in svn a new version the debianization of rheolef :
> it fixes the problem related to g++ 5 in sid and testing (bug #778106 ).
I had a quick look at your work and it looks like the
64 matches
Mail list logo