Package: src:linux
Version: 3.14.4-1
Severity: critical
Justification: breaks the whole system

Dear Maintainer,

after upgrading from 3.14.5-1 to 3.14.7-1 the system crashes directly
after the message "Uncompressing linux image..."

Booting into single user mode let the system hang on different positions
around the SATA drive detection of the SSD. I am very
sorry I had no camera around - and I needed to get the machine work fast
again. So I swapped back to 3.14.4-1 via d-i recovery mode. The
following information is from this 3.14.4-1.

I can only report an "issue" actual and I try to reconstruct this problem on a
twin machine in the next days with some camera screenshots. But maybe
some early message is helpful before moving the image into testing...

-- Package-specific info:
** Version:
Linux version 3.14-1-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.2 
(Debian 4.8.2-21) ) #1 SMP Debian 3.14.4-1 (2014-05-13)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 
root=UUID=19534a9e-d830-4f97-b402-1c7cdce6e5bb ro quiet 
init=/lib/systemd/systemd cgroup_enable=memory swapaccount=1

** Not tainted

** Kernel log:
[   11.077047] systemd[1]: Cannot add dependency job for unit 
systemd-vconsole-setup.service, ignoring: Unit systemd-vconsole-setup.service 
failed to load: No such file or directory. See system logs and 'systemctl 
status systemd-vconsole-setup.service' for details.
[   11.090222] systemd[1]: Cannot add dependency job for unit 
systemd-vconsole-setup.service, ignoring: Unit systemd-vconsole-setup.service 
failed to load: No such file or directory. See system logs and 'systemctl 
status systemd-vconsole-setup.service' for details.
[   11.379380] netlink: 1 bytes leftover after parsing attributes.
[   11.383826] device veth8d80 entered promiscuous mode
[   11.384205] IPv6: ADDRCONF(NETDEV_UP): veth8d80: link is not ready
[   11.384214] docker0: port 2(veth8d80) entered forwarding state
[   11.384225] docker0: port 2(veth8d80) entered forwarding state
.... manymany docker interfaces
[   16.980702] Netfilter messages via NETLINK v0.30.
[   26.078652] docker0: port 1(veth32d8) entered forwarding state
[   26.398648] docker0: port 2(veth8d80) entered forwarding state
[   26.590655] docker0: port 3(veth5a99) entered forwarding state
.... manymany docker interfaces
[   59.876252] netlink: 1 bytes leftover after parsing attributes.
[   59.883792] device veth564c entered promiscuous mode
[   59.890847] IPv6: ADDRCONF(NETDEV_UP): veth564c: link is not ready
[   59.911940] IPv6: ADDRCONF(NETDEV_CHANGE): veth564c: link becomes ready
[   59.912009] docker0: port 14(veth564c) entered forwarding state
[   59.912024] docker0: port 14(veth564c) entered forwarding state
[   74.942669] docker0: port 14(veth564c) entered forwarding state
[ 1294.636629] perf samples too long (2515 > 2500), lowering 
kernel.perf_event_max_sample_rate to 50000
[ 3915.736746] perf samples too long (5006 > 5000), lowering 
kernel.perf_event_max_sample_rate to 25000

** Model information
sys_vendor: ���������������������������������
product_name: ���������������������������������
product_version: ���������������������������������
chassis_vendor: ���������������������������������
chassis_version: ���������������������������������
bios_vendor: Intel Corp.
bios_version: FYBYT10H.86A.0028.2014.0306.1727
board_vendor: Intel Corporation
board_name: DN2820FYK
board_version: H24582-201

** Loaded modules:
nfnetlink
veth
xt_nat
xt_tcpudp
xt_addrtype
xt_conntrack
ipt_MASQUERADE
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
bridge
binfmt_misc
iptable_filter
ip_tables
x_tables
snd_hda_codec_realtek
snd_hda_codec_generic
evdev
intel_rapl
coretemp
kvm_intel
kvm
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
cryptd
iwlwifi
psmouse
serio_raw
pcspkr
btusb
snd_hda_intel
bluetooth
cfg80211
snd_hda_codec
6lowpan_iphc
rfkill
crc16
snd_hwdep
snd_pcm
snd_timer
snd
soundcore
battery
i915
video
drm_kms_helper
drm
i2c_algo_bit
processor
i2c_core
button
8021q
garp
stp
mrp
llc
fuse
autofs4
btrfs
hid_generic
xor
usbhid
hid
raid6_pq
crc32c
libcrc32c
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
fan
thermal
thermal_sys
xhci_hcd
r8169
mii
ahci
libahci
usbcore
usb_common
libata
scsi_mod

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation ValleyView SSA-CUnit [8086:0f00] 
(rev 0c)
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation ValleyView Gen7 
[8086:0f31] (rev 0c) (prog-if 00 [VGA controller])
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 106
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4M]
        Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Region 4: I/O ports at f080 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:13.0 SATA controller [0106]: Intel Corporation ValleyView 6-Port SATA AHCI 
Controller [8086:0f23] (rev 0c) (prog-if 01 [AHCI 1.0])
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 103
        Region 0: I/O ports at f070 [size=8]
        Region 1: I/O ports at f060 [size=4]
        Region 2: I/O ports at f050 [size=8]
        Region 3: I/O ports at f040 [size=4]
        Region 4: I/O ports at f020 [size=32]
        Region 5: Memory at d0816000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:14.0 USB controller [0c03]: Intel Corporation ValleyView USB xHCI Host 
Controller [8086:0f35] (rev 0c) (prog-if 30 [XHCI])
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 105
        Region 0: Memory at d0800000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

00:1a.0 Encryption controller [1080]: Intel Corporation ValleyView SEC 
[8086:0f18] (rev 0c)
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 255
        Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=1M]
        Region 1: Memory at d0400000 (32-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation ValleyView High Definition Audio 
Controller [8086:0f04] (rev 0c)
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 107
        Region 0: Memory at d0810000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port 
[8086:0f48] (rev 0c) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port 
[8086:0f4a] (rev 0c) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d0700000-d07fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port 
[8086:0f4c] (rev 0c) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: d0600000-d06fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation ValleyView PCI Express Root Port 
[8086:0f4e] (rev 0c) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation ValleyView Power Control Unit 
[8086:0f1c] (rev 0c)
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.3 SMBus [0c05]: Intel Corporation ValleyView SMBus Controller [8086:0f12] 
(rev 0c)
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at d0814000 (32-bit, non-prefetchable) [size=32]
        Region 4: I/O ports at f000 [size=32]
        Capabilities: <access denied>

02:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] 
(rev 73)
        Subsystem: Intel Corporation Wireless-N 7260 [8086:4062]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at d0700000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
        Subsystem: Intel Corporation Device [8086:2055]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 104
        Region 0: I/O ports at e000 [size=256]
        Region 2: Memory at d0604000 (64-bit, non-prefetchable) [size=4K]
        Region 4: Memory at d0600000 (64-bit, prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: r8169


** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:07dc Intel Corp.
Bus 001 Device 002: ID 051d:0002 American Power Conversion Uninterruptible 
Power Supply
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 3.14-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.14-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    17-2
ii  linux-base                              3.5

Versions of packages linux-image-3.14-1-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.14-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-10
pn  linux-doc-3.14          <none>

Versions of packages linux-image-3.14-1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
ii  firmware-realtek        0.43
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false
  linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true


-- 
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to