Why not bridge eth0 and eth1?
- Original Message -
From: "Peter Billson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, September 30, 2001 9:25 PM
Subject: Re: Roach Motel For Packets...
> Let me see if bad drawings help any:
>
&g
Let me see if bad drawings help any:
eth0(to Internet IP "A.A.A.A")--|--|
|Router|--eth2(192.168.1.1)
eth1(to Internet IP "B.B.B.B")--|--| eth2:0(10.0.0.1)
and
|---|
<<--to router --eth0(192.168.1.2)---|P
On Sat, 29 Sep 2001, Peter Billson wrote:
> I have a Linux router with two connections from different service
> providers (eth0 and eth1) coming in and want to route all traffic to go
> out eth2. Eth0 is the router's default gateway
>
> I assigned eth2 two ips (eth2=192.168.0.1 and eth2:0=10
> as is required by RFC, routing is disabled by default. to enable
> routing:
>
> echo 1 >/proc/sys/net/ipv4/ip_forward
>
> use /etc/sysctl.conf to have it enabled automatically at boot.
100% correct you are, but I have already done this. Note that "stuff"
coming in eth0 is getting forwarded co
On Sun, Sep 30, 2001 at 10:18:28AM +1000, Craig Sanders wrote:
> echo 1 >/proc/sys/net/ipv4/ip_forward
>
> use /etc/sysctl.conf to have it enabled automatically at boot.
That's one way. The other being:
vim /etc/network/options
There you'll find two other useful options also. All 3 would be
th
On Sat, Sep 29, 2001 at 10:46:37AM -0400, Peter Billson wrote:
> But if I try to ping eth1, or any of the IPs serviced by eth1, from a
> remote machine the packets come into the router and disappear. They
> do not get DENYed, ACCEPTed or FORWARDed by IPChains on any
> interface. The rules relating
Hi all,
I have successfully created a Linux "Roach Motel"... packets check in,
but they don't check out! Unfortunately, I was trying to create a
router! :-)
I have a Linux router with two connections from different service
providers (eth0 and eth1) coming in and want to route all traffic to g
7 matches
Mail list logo
