Hi Conrad,
Conrad Hughes wrote:
> I'm using a keyboard-video-mouse (KVM) switch to switch between a number
> of computers; before squeeze, this worked brilliantly. Since upgrading
> to squeeze, a few minutes after I switch to another computer, my squeeze
> install kills X completely. All I'm se
Processing commands for cont...@bugs.debian.org:
> found 610851 linux-2.6/2.6.32-30
Bug #610851 [linux-2.6] base: Crash at boot time
Bug Marked as found in versions linux-2.6/2.6.32-30.
> retitle 610851 radeon: memory corruption after modesetting when RV770
> microcode not installed
Bug #610851 [
found 610851 linux-2.6/2.6.32-30
retitle 610851 radeon: memory corruption after modesetting when RV770 microcode
not installed
tags 610851 + upstream
quit
Hi Charles-Henry,
Charles-Henry Houdemer wrote:
> My suspitions on the graphic card, I wondered if the absence of the
> proprietary firmware
Processing commands for cont...@bugs.debian.org:
> notfound 604824 2.6.32+27
Bug #604824 [linux-2.6] linux-2.6: problems with ata disk interface: temporary
freezes
There is no source info for the package 'linux-2.6' at version '2.6.32+27' with
architecture ''
Unable to make a source version for
notfound 604824 2.6.32+27
found 604824 linux-2.6/2.6.32-27
quit
Hi again,
Fulvio Ciriaco wrote:
> no freeze. I have been running a kernel booted noapic more
> than two days by now without errors in dmesg nor insensitivity.
Sorry for the long lull. Basic questions:
- the subject line says thi
Hi,
Sorry for the long silence.
The Anarcat wrote:
> Today I had a very special issue with my workstation. The display would
> start but freeze. Even though in the back things are still happening,
> the display isn't updated and the only way out is to go to TTY1
> (control-alt-F1) where the cons
Your message dated Tue, 30 Aug 2011 00:28:50 -0500
with message-id <20110830052850.ga9...@elie.gateway.2wire.net>
and subject line Re: linux-2.6: fan not active after sleep/hibernate
has caused the Debian Bug report #592750,
regarding linux-2.6: fan not active after sleep/hibernate
to be marked as
On 08/30/2011 06:16 AM, Daniel Kahn Gillmor wrote:
> I concur with Sean Finney that nfs-utils should Build-Depend on
> libnfsidmap-dev >= 0.24 to ease backporting.
>
> I'm hoping to prepare nfs-utils 1.2.4 as a backport for squeeze, and
> it'd be nice to modify the source package as minimally as p
Hi again. :)
Willi Mann wrote:
> I'm experiencing this problem with rc5 and rc6 of 2.6.35. Mostly when using
> Iceweasel - so far I've only seen it when clicking on links and thus causing
> another tcp connection to occur - the machine sometimes hangs completly.
> Hitting
> Ctrl+Alt+F1 doesn't a
Hi Petter,
Petter Reinholdtsen wrote:
> I ran into this on a freshly installed Thinkpad X40 with todays
> Debian/Squeeze. The external VGA connector is connected to a video
> projector. I plugged in a USB DVD player, installed libdvdcss2 and
> tried to play the DVD using vlc. This caused X to
Jonathan Nieder wrote:
> If you get a chance to test a squeeze (2.6.32) kernel, too, that would
> be helpful.
Erm, what am I saying? The fix is in squeeze, so no need to test unless
bored.
Sleepily,
Jonathan
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject o
Your message dated Mon, 29 Aug 2011 23:39:35 -0500
with message-id <20110830043935.ga8...@elie.gateway.2wire.net>
and subject line Re: initramfs-tools: breaks software suspend (hibernation)
has caused the Debian Bug report #584259,
regarding initramfs-tools: breaks software suspend (hibernation)
to
I concur with Sean Finney that nfs-utils should Build-Depend on
libnfsidmap-dev >= 0.24 to ease backporting.
I'm hoping to prepare nfs-utils 1.2.4 as a backport for squeeze, and
it'd be nice to modify the source package as minimally as possible.
I just got the thumbs-up from anibal to backport li
Processing commands for cont...@bugs.debian.org:
> unarchive 603981
Bug #603981 {Done: maximilian attems } [initramfs-tools]
initramfs-tools: Load PowerMac G5 thermal modules
Unarchived Bug 603981
> reassign 580832 initramfs-tools 0.94.4
Bug #580832 [linux-2.6] linux-image-2.6.32-5-powerpc64: Fan
unarchive 603981
reassign 580832 initramfs-tools 0.94.4
forcemerge 603981 580832
quit
Erik de Castro Lopo wrote:
> I'm currently running unstable on my G5 Mac. I've just upgraded
> to the 3.0.0 kernel (from the debian package) and if I remove
> the "windfarm_core" line from /etc/modules, the mach
Processing commands for cont...@bugs.debian.org:
> notfound 584314 linux-2.6/2.6.32-32
Bug #584314 [linux-2.6] base: System freezes at random time after Resume from
Suspend (Regression)
Bug No longer marked as found in versions linux-2.6/2.6.32-32.
> notfixed 584314 linux-2.6/2.6.38-3
Bug #584314
notfound 584314 linux-2.6/2.6.32-32
notfixed 584314 linux-2.6/2.6.38-3
found 584314 linux-2.6/2.6.32-30
fixed 584314 linux-2.6/2.6.38-5
quit
Andreas Berger wrote:
> in linux-image-2.6.32-5-686, version 2.6.32-30, the bug was still there,
> in linux-image-2.6.38-2-686, version 2.6.38-5, the bug wa
On Fri, 2011-06-03 at 04:16 +0100, Ben Hutchings wrote:
> On Thu, 2011-05-19 at 15:29 +0100, Ben Hutchings wrote:
> > The Debian kernel team regularly backports driver updates to the Linux
> > kernel in stable releases to add support for new hardware. In the
> > current stable release, the Linux k
On Mon, 2011-06-06 at 01:39 +0100, Ben Hutchings wrote:
> On Sun, 2011-06-05 at 04:35 +0100, Ben Hutchings wrote:
> > On Fri, 2011-06-03 at 14:24 -0700, Matt Carlson wrote:
[...]
> > > commit 2ffcc981d823a0518c627ca22d51ef72d0b7ca9a
> > > tg3: Set tx bug flags for more devices
> > > commit 34eea5
The Debian kernel team regularly backports driver updates to the Linux
kernel in stable releases to add support for new hardware. In the
current stable release, the Linux kernel is based on longterm series
2.6.32.y.
We generally prefer to cherry-pick bug fixes and new hardware support,
but there
linux-2.6_3.1.0~rc4-1~experimental.1.diff.gz
to main/l/linux-2.6/linux-2.6_3.1.0~rc4-1~experimental.1.diff.gz
linux-2.6_3.1.0~rc4-1~experimental.1.dsc
to main/l/linux-2.6/linux-2.6_3.1.0~rc4-1~experimental.1.dsc
linux-2.6_3.1.0~rc4.orig.tar.gz
to main/l/linux-2.6/linux-2.6_3.1.0~rc4.orig.tar.
Processing commands for cont...@bugs.debian.org:
> forwarded 639208 https://bugzilla.kernel.org/show_bug.cgi?id=41992
Bug #639208 [linux-2.6] linux-image-3.0.0-1-amd64: Segfault everytime
Bug #615397 [linux-2.6] linux-image-2.6.37-1-amd64: segfault in multiple apps
when using this kernel
Set Bug
On Sun, 2011-08-28 at 18:16 +0100, Ben Hutchings wrote:
> These are fine. The only difference I can see is that the pata_via and
> sata_via drivers are loaded in the opposite order. They ought to work
> in either order but this could possibly be related.
>
> Please report this bug upstream at h
linux-2.6_3.1.0~rc4-1~experimental.1_multi.changes uploaded successfully to
localhost
along with the files:
linux-2.6_3.1.0~rc4-1~experimental.1.dsc
linux-2.6_3.1.0~rc4.orig.tar.gz
linux-2.6_3.1.0~rc4-1~experimental.1.diff.gz
linux-doc-3.1.0_3.1.0~rc4-1~experimental.1_all.deb
linux-manua
Probably you are the uploader of the following file(s) in
the Debian upload queue directory:
linux-2.6_3.1.0~rc4-1~experimental.1.diff.gz
linux-2.6_3.1.0~rc4-1~experimental.1.dsc
This looks like an upload, but a .changes file is missing, so the job
cannot be processed.
If no .changes file arri
Processing commands for cont...@bugs.debian.org:
> # bugzilla to make it easier for people on other distros to participate
> forwarded 635575 https://bugzilla.kernel.org/show_bug.cgi?id=41932
Bug #635575 [linux-2.6] [linux-2.6] Will not wake up after sleep
Bug #636102 [linux-2.6] linux-image-3.0.0
Probably you are the uploader of the following file(s) in
the Debian upload queue directory:
linux-2.6_3.1.0~rc4-1~experimental.1.dsc
This looks like an upload, but a .changes file is missing, so the job
cannot be processed.
If no .changes file arrives within 23:26:01, the files will be deleted.
Your message dated Mon, 29 Aug 2011 16:38:57 -0500
with message-id <20110829213856.gh9...@elie.gateway.2wire.net>
and subject line Re: cdrom: Debian does not boot right after installation
has caused the Debian Bug report #568088,
regarding cdrom: Debian does not boot right after installation
to be
Processing commands for cont...@bugs.debian.org:
> Version: 2.6.32-35
Unknown command or malformed arguments to command.
> tags 568088 - moreinfo
Bug #568088 [linux-2.6] cdrom: Debian does not boot right after installation
Removed tag(s) moreinfo.
> quit
Stopping processing here.
Please contact
Hello Jonathan,
2011/8/26 Jonathan Nieder
>
> Do you remember what this was about? Does that machine boot a more
> recent kernel without requiring special flags now, and if so, which
> one?
>
>
I have never experienced this bug since 6.x Debian. So, I guess it is fixed.
--
with best regards,
Processing commands for cont...@bugs.debian.org:
> forwarded 622259 https://bugzilla.kernel.org/show_bug.cgi?id=41982
Bug #622259 {Done: Jonathan Nieder } [linux-2.6]
linux-image-2.6.32-5-686: resuming from hibernation sometimes fails on eeepc
1002HA
Bug #623149 {Done: Jonathan Nieder } [linux-2
forwarded 622259 https://bugzilla.kernel.org/show_bug.cgi?id=41982
quit
Frédéric Boiteux wrote:
> Robert already did tests very quickly, but I'll try also to give some
> info : I've tried 2.6.39-bpo.2-686-pae, making 4 hibernations with some
> pauses between them, and it worked each time (the b
On 29/08/11 04:44, Jonathan Nieder wrote:
> Ah, that must have been painful. I should have included confirming that
> v2.6.36-rc6 is broken in the list of steps; sorry. :/
Np
> Nice. Have you found which item in the .config caused it?
No, not yet.
I should report back this week or next week.
#
# bts-link upstream status pull for source package linux-2.6
# see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html
#
user bts-link-upstr...@lists.alioth.debian.org
# remote status report for #637392 (http://bugs.debian.org/637392)
# * https://bugs.freedesktop.org/show_bug.c
Processing commands for cont...@bugs.debian.org:
> # Was discussed upstream last week. The solution seems to be
> # "use NFSv4 and Kerberos". :)
> tags 384922 - moreinfo
Bug #384922 [linux-2.6] Please support squash_gids option for NFS
Removed tag(s) moreinfo.
>
End of message, stopping processin
Ben Hutchings wrote:
> This is what I've added for 2.6.32-36. Any review would be
> appreciated.
Looks good to me.
Possibly relevant upstream commits:
v2.6.34-rc1~260^2~15 (sched: Fix the place where group powers are
updated)
v2.6.36-rc1~531^2~4 (sched: Reduce update_group_power() calls)
This is what I've added for 2.6.32-36. Any review would be appreciated.
Ben.
From: Ben Hutchings
Subject: sched: Work around sched_group::cpu_power = 0
#636797 and others report a division by zero in the scheduler due
to sched_group::cpu_power. Try to work out why this is happening,
and fix i
Processing commands for cont...@bugs.debian.org:
> found 577747 linux-2.6/2.6.39-3
Bug #577747 [linux-2.6] linux-image-2.6.32-4-686: corrupted SSHÂ connection
little time after boot with the atl1e driver on a Eeepc 1002HA
Bug Marked as found in versions linux-2.6/2.6.39-3.
> tags 577747 - moreinf
found 577747 linux-2.6/2.6.39-3
tags 577747 - moreinfo
forwarded 577747 https://bugzilla.kernel.org/show_bug.cgi?id=12282
quit
Frédéric Boiteux wrote:
> Also, trying 2.6.39 for squeeze-backports showed that the other bug I
> had to patch my kernel for, Ethernet adapter giving corrupted packets
On Mon, 2011-08-29 at 17:29 +0200, Klaus Treichel wrote:
> Package: linux-image-2.6-4kc-malta
> Version: 3.0.0+39
> Severity: important
>
> version 3.0.0-1 (also 2.6.39-2) don't boot in qemu.
> They panic with this output:
I think this was broken by:
commit af3a1f6f4813907e143f87030cde67a9971db5
Processing commands for cont...@bugs.debian.org:
> reassign 639706 src:linux-2.6 3.0.0-1
Bug #639706 [src:linux-2.6] linux-image-2.6-4kc-malta: version 3.0.0-1 doesn't
boot on qemu
Ignoring request to reassign bug #639706 to the same package
Bug #639706 [src:linux-2.6] linux-image-2.6-4kc-malta:
Processing commands for cont...@bugs.debian.org:
> reassign 639706 src:linux-2.6 3.0.0-1
Bug #639706 [linux-image-2.6-4kc-malta] linux-image-2.6-4kc-malta: version
3.0.0-1 doesn't boot on qemu
Bug reassigned from package 'linux-image-2.6-4kc-malta' to 'src:linux-2.6'.
Bug No longer marked as foun
On Mon, Aug 29, 2011 at 04:22:36PM +0100, Ben Hutchings wrote:
> On Mon, 2011-08-29 at 16:06 +0200, Julien Valroff wrote:
> > Hi Ben,
> >
> > Le lundi 29 août 2011 à 14:07:44 (+0200 CEST), Ben Hutchings a écrit :
> > > On Mon, 2011-08-29 at 00:35 +0200, Eloi COUTANT wrote:
> > > > Hi.
> > > >
> >
Your message dated Mon, 29 Aug 2011 11:00:16 -0500
with message-id <20110829160016.gd2...@elie.gateway.2wire.net>
and subject line Re: linux-image-2.6.33: fails to boot
has caused the Debian Bug report #572488,
regarding linux-image-2.6.33: fails to boot
to be marked as done.
This means that you c
Processing commands for cont...@bugs.debian.org:
> Version: 3.0.0-3
Unknown command or malformed arguments to command.
> tags 572488 - moreinfo
Bug #572488 [linux-2.6] linux-image-2.6.33: fails to boot
Removed tag(s) moreinfo.
> quit
Stopping processing here.
Please contact me if you need assist
Package: linux-image-2.6-4kc-malta
Version: 3.0.0+39
Severity: important
version 3.0.0-1 (also 2.6.39-2) don't boot in qemu.
They panic with this output:
[0.00] Initializing cgroup subsys cpuset
[0.00] Initializing cgroup subsys cpu
[0.00] Linux version 3.0.0-1-4kc-malta (
On Mon, 2011-08-29 at 16:06 +0200, Julien Valroff wrote:
> Hi Ben,
>
> Le lundi 29 août 2011 à 14:07:44 (+0200 CEST), Ben Hutchings a écrit :
> > On Mon, 2011-08-29 at 00:35 +0200, Eloi COUTANT wrote:
> > > Hi.
> > >
> > > I confirm that Julien's patch is efficient on Samsung RC510.
> > > I have
Excerpts from Jonathan Nieder's message of Fri Aug 26 18:05:30 +0200 2011:
> Michal Suchanek wrote:
>
> > It's long time ago and I stopped using the machine.
> > Obviously, I can boot it with my old kernel which has this option set
> > to the correct value but not sure if current kernels are any
On Fri, Aug 26, 2011 at 06:58:34PM -0400, Gedalya wrote:
>
> >One way to make sure that is not the case is to disable barriers in the
> >guest. Meaning in /etc/fstab have something like this:
> >
> >/dev/xvdc /blah ext4errors=remount-ro,barrier=0 0 1
>
> That seems to fix it. It was remou
Hi Ben,
Le lundi 29 août 2011 à 14:07:44 (+0200 CEST), Ben Hutchings a écrit :
> On Mon, 2011-08-29 at 00:35 +0200, Eloi COUTANT wrote:
> > Hi.
> >
> > I confirm that Julien's patch is efficient on Samsung RC510.
> > I have no problems anymore : one, two and three fingers are working,
> > "wheels
Processing commands for cont...@bugs.debian.org:
> tags 635344 + pending
Bug #635344 {Done: Ben Hutchings } [linux-2.6] cifs:
kernel BUG at mm/slab.c:3059!
Bug #637436 {Done: Ben Hutchings } [linux-2.6] cifs:
kernel BUG at mm/slab.c:3059!
Bug #639416 {Done: Ben Hutchings } [linux-2.6]
linux-ima
Processing commands for cont...@bugs.debian.org:
> tags 638956 + pending
Bug #638956 {Done: Ben Hutchings } [linux-2.6]
include-network bug script doesn't work in case of bonding
Added tag(s) pending.
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
638956: http:/
Processing commands for cont...@bugs.debian.org:
> tags 638656 + pending
Bug #638656 {Done: Ben Hutchings } [linux-2.6] br2684:
Sent packets truncated in VC routed mode
Added tag(s) pending.
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
638656: http://bugs.debi
Processing commands for cont...@bugs.debian.org:
> tags 638696 + pending
Bug #638696 [linux-2.6] FTBFS on alpha; GPIO config is insane
Ignoring request to alter tags of bug #638696 to the same tags previously set
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
638
Processing commands for cont...@bugs.debian.org:
> tags 638696 + pending
Bug #638696 [linux-2.6] FTBFS on alpha; GPIO config is insane
Ignoring request to alter tags of bug #638696 to the same tags previously set
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
638
Processing commands for cont...@bugs.debian.org:
> tags 639439 + pending
Bug #639439 [linux-2.6] reportbug script fails on s390: no PCI bus
Ignoring request to alter tags of bug #639439 to the same tags previously set
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
Package: nfs-utils
Version: 1.2.4-1
Severity: normal
The upstream m4/autofoo only enables nfsidmapd related stuff if it
finds certain api functions available, which after some investigation
appears to have been introduced in 0.24.
This will otherwise cause FTBFS's for anyone wanting to backport t
Processing commands for cont...@bugs.debian.org:
> tags 638696 + pending
Bug #638696 [linux-2.6] FTBFS on alpha; GPIO config is insane
Added tag(s) pending.
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
638696: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=63
On Mon, 2011-08-29 at 00:35 +0200, Eloi COUTANT wrote:
> Hi.
>
> I confirm that Julien's patch is efficient on Samsung RC510.
> I have no problems anymore : one, two and three fingers are working,
> "wheels" too !
[...]
Julien, please can you provide a list of *upstream* changes. We will
not app
On Mon, 2011-08-29 at 10:07 +0400, Константин Алексеев wrote:
> I think this bug may be closed.
> I posted it to xen devel list and get answer:
> "It's really an unsupported configuration. If you want to limit dom0 vcpus
> then dom0_max_vcpus= on Xen command line is the correct way."
>
> http://li
Le Sat, 27 Aug 2011 12:53:06 -0500,
Jonathan Nieder a écrit :
> Robert Scott wrote:
> > On Saturday 27 August 2011, Jonathan Nieder wrote:
>
> >> I think we are long overdue to take this one upstream. I have a
> >> few questions anyway for before then:
> >>
> >> - does hibernation work for yo
Processing commands for cont...@bugs.debian.org:
> tags 639618 + unreproducible
Bug #639618 [linux-2.6] linux-image-2.6.32-5-686: events/0 using 33-66% cpu
("system"), missing keystrokes before or after gdm loads
Added tag(s) unreproducible.
> severity 639618 normal
Bug #639618 [linux-2.6] linux-
On Sun, 2011-08-28 at 21:36 -0700, Mark Hedges wrote:
> > > The keyboard is missing keystrokes if I type
> > > too many at one time and don't pause every few seconds for it to
> > > catch up. This happens even before I log into gdm, if I go to a
> > > console with ctl-alt-F1 and log in as root aft
63 matches
Mail list logo
