Hi Jonathan,
this machine is no longer accessible. ;-)
Cheers
Olaf
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/4fb89dc1.1010...@tuxfriends.net
Hello Moritz,
I tried 2.6.24 and 2.6.26-bpo on both machines. On both machines intelfb
now refuses to load with the message cannot acquire agp.
/etc/initramfs-tools/modules contains:
agp
intel_agp
intelfb mode=1024x768...@60
I added the agp module, but I do not know exactly if I need that.
Package: linux-image-2.6.24-etchnhalf.1-686
Version: 2.6.24-6~etchnhalf.6
Severity: grave
Justification: causes non-serious data loss
upgraded from 2.6.18 to 2.6.24-etchnhalf on i686 machine, afterwards all my
RAID1 volumes were broken:
Personalities : [raid1]
md3 : active raid1 hda6[0]
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-8
Severity: important
When intelfb is loaded, the screen goes into standby immediately. System is
Dell Dimension E520.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-8) ([EMAIL PROTECTED]) (gcc version
4.1.3
Package: linux-image-2.6.18-6-686
Architecture: i386
Version: 2.6.18.dfsg.1-18etch5
The module vesafb.ko is missing. I need it because intelfb is not
worling on my notebook, see #426714.
Regards
Olaf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Adding intelfb and intel_agp to /etc/initramfs-tools/modules did not
help here.
hardware is Dell Inspiron m510. lspci says:
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855
Package: linux-image-2.6.22-3-686
Architecture: i386
Version: 2.6.22-6
/vmlinuz links are not updated. Situation is: machine has no kernel
installed.
# apt-get install linux-image-2.6-686
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following
Package: linux-image-2.6.18-5-686
Version: 2.6.18.dfsg.1-13etch2
Severity: normal
mounting floppy disk is impossible:
# mount -t vfat /dev/fd0 /media/floppy0
mount: special device /dev/fd0 does not exist
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500,
maximilian attems schrieb:
it's not up to the kernel to create this device.
So should I file a bug report on udev then?
is the floppy module loaded?
no, and this should be done by the kernel IMHO.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Package: linux-image-2.6.18-4-686
Architecture: i386
Version: 2.6.18.dfsg.1-12etch2
intelfb fails to load on a laptop although there is no reason for this - my
desktop system loads the module just fine with a LCD display.
Notebook:
# lspci
00:02.0 VGA compatible controller: Intel Corporation
Greg Folkert schrieb am 01/02/07 18:16:
On Tue, 2007-01-02 at 16:57 +0100, Olaf Zaplinski wrote:
Hi Pawel,
thanks, but I have a USB only system (Dell Dimension 3100), no PS/2 ports
any more and so no BIOS option, USB keyboard support is always on.
You must have USB legacy support turned
Package: kernel
Version: 2.6
Hi,
when I boot 3.1r4 from DVD, I either can get USB keyboard support (2.6
kernel) *or* support for SATA disks (2.4 kernel). So when will the 2.6
kernel support USB keyboards when installing?
Sorry if I ask a well-known question, but searching www.debian.org is
Hi Pawel,
thanks, but I have a USB only system (Dell Dimension 3100), no PS/2 ports
any more and so no BIOS option, USB keyboard support is always on.
Olaf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi Maximilian,
I have exactly the same problems.
this is old use 2.6.18 from sid,
will just install fine on testing.
What do you mean? I have the most current linux image on Etch here, same
problem. dmesg output is below.
Olaf
Linux version 2.6.17-2-686 (Debian 2.6.17-9) ([EMAIL
14 matches
Mail list logo
