Your message dated Mon, 22 Jan 2024 10:28:11 +0000
with message-id <e1rrrxh-005qd7...@fasolo.debian.org>
and subject line Bug#1043354: fixed in linux 6.7.1-1~exp1
has caused the Debian Bug report #1043354,
regarding linux-image-6.1.0-10-armmp: please enable analog devices ethernet phy
driver "adin"
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
1043354: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1043354
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 6.1.38-2+sr1
Severity: normal
Tags: patch
X-Debbugs-Cc: josua.maye...@gmail.com
Dear Maintainer,
Please enable the "adin" driver for analog devices ADIN1300 ethernet phy.
SolidRun i.MX6 SoMs revision 1.9 and later replaced the original Atheros
ethernet PHY with
ADIN1300. This combination is fully supported in Linux 6.1.
Therefore please enable the kernel module for armhf target.
Sincerely
Josua Mayer
-- Package-specific info:
** Version:
Linux version 6.1.0-10-armmp (debian-kernel@lists.debian.org) (gcc-12 (Debian
12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian
6.1.38-2+sr1 (2023-08-03)
** Command line:
console=ttymxc0,115200 deferred_probe_timeout=10 ahci_imx.hotplug=1 cma=128M
log_level=7 net.ifnames=0
** Tainted: C (1024)
* staging driver was loaded
** Kernel log:
[ 18.664358] Registered IR keymap rc-empty
[ 18.716304] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
[ 18.759979] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 18.774524] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0,
raw IR receiver, no transmitter
[ 18.800230] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 18.815890] input: gpio_ir_recv as
/devices/platform/ir-receiver/rc/rc0/input0
[ 18.848755] mc: Linux media interface: v0.10
[ 18.947000] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops [etnaviv])
[ 18.953152] videodev: Linux video capture interface: v2.00
[ 19.011893] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a with
HDCP (DWC HDMI 3D TX PHY)
[ 19.040476] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops [etnaviv])
[ 19.078395] imx_media_common: module is from the staging directory, the
quality is unknown, you have been warned.
[ 19.096468] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops [etnaviv])
[ 19.103221] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[ 19.136549] imx6_media: module is from the staging directory, the quality is
unknown, you have been warned.
[ 19.167734] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[ 19.211360] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[ 19.217588] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 19.242861] CAN device driver interface
[ 19.311072] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0
[ 19.330363] coda 2040000.vpu: firmware: failed to load vpu_fw_imx6q.bin (-2)
[ 19.337504] firmware_class: See https://wiki.debian.org/Firmware for
information about missing firmware
[ 19.352112] coda 2040000.vpu: firmware: failed to load vpu_fw_imx6q.bin (-2)
[ 19.359277] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin
failed with error -2
[ 19.382870] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 19.419980] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
imx_drm_exit [imxdrm])
[ 19.429343] coda 2040000.vpu: firmware: direct-loading firmware
vpu/vpu_fw_imx6q.bin
[ 19.454390] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops
imx_drm_exit [imxdrm])
[ 19.461379] coda 2040000.vpu: Using fallback firmware vpu/vpu_fw_imx6q.bin
[ 19.511767] coda 2040000.vpu: Firmware code revision: 46076
[ 19.517435] coda 2040000.vpu: Initialized CODA960.
[ 19.522318] coda 2040000.vpu: Firmware version: 3.1.1
[ 19.538475] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops
imx_drm_exit [imxdrm])
[ 19.582536] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops
imx_drm_exit [imxdrm])
[ 19.614946] coda 2040000.vpu: coda-jpeg-encoder registered as video0
[ 19.626811] imx-drm display-subsystem: bound 120000.hdmi (ops
dw_hdmi_imx_ops [dw_hdmi_imx])
[ 19.678814] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem
on minor 1
[ 19.688579] coda 2040000.vpu: coda-jpeg-decoder registered as video1
[ 19.705350] imx_thermal 20c8000.anatop:tempmon: Extended Commercial CPU
temperature grade - max:105C critical:100C passive:95C
[ 19.726904] coda 2040000.vpu: coda-video-encoder registered as video2
[ 19.746329] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 19.768188] coda 2040000.vpu: coda-video-decoder registered as video3
[ 19.823963] imx-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 19.888081] caam 2100000.crypto: Entropy delay = 3200
[ 19.953984] caam 2100000.crypto: Instantiated RNG4 SH0
[ 20.014746] caam 2100000.crypto: Instantiated RNG4 SH1
[ 20.051209] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4)
[ 20.057950] caam 2100000.crypto: job rings = 2, qi = 0
[ 20.258432] sgtl5000 0-000a: sgtl5000 revision 0x11
[ 20.320280] sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
erratum
[ 20.553197] debugfs: File 'Headphone Jack' in directory 'dapm' already
present!
[ 20.687846] imx6_media_csi: module is from the staging directory, the
quality is unknown, you have been warned.
[ 20.694504] imx6_media_csi: module is from the staging directory, the
quality is unknown, you have been warned.
[ 20.698829] imx6_media_csi: module is from the staging directory, the
quality is unknown, you have been warned.
[ 20.710278] imx6_media_csi: module is from the staging directory, the
quality is unknown, you have been warned.
[ 20.790395] Registered IR keymap rc-cec
[ 20.794771] rc rc1: dw_hdmi as /devices/platform/soc/120000.hdmi/rc/rc1
[ 20.816378] input: dw_hdmi as /devices/platform/soc/120000.hdmi/rc/rc1/input1
[ 20.826356] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture as
/dev/video4
[ 20.893490] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as
/dev/video5
[ 20.940559] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as
/dev/video6
[ 20.998419] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating
driver video-mux to match on endpoints
[ 21.102726] imx-ipuv3-csi imx-ipuv3-csi.1: Registered ipu1_csi1 capture as
/dev/video7
[ 21.194887] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture as
/dev/video8
[ 21.267012] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as
/dev/video9
[ 21.333790] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf capture as
/dev/video10
[ 21.385029] imx-ipuv3-csi imx-ipuv3-csi.5: Registered ipu2_csi1 capture as
/dev/video11
[ 21.466550] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating
driver video-mux to match on endpoints
[ 21.551650] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video12
[ 21.614283] ADIN1300 2188000.ethernet-1:01: attached PHY driver
(mii_bus:phy_addr=2188000.ethernet-1:01, irq=POLL)
[ 21.878314] alg: No test for authenc(hmac(sha224),ecb(cipher_null))
(authenc-hmac-sha224-ecb-cipher_null-caam)
[ 21.914258] alg: No test for authenc(hmac(sha256),ecb(cipher_null))
(authenc-hmac-sha256-ecb-cipher_null-caam)
[ 21.930504] alg: No test for authenc(hmac(md5),cbc(aes))
(authenc-hmac-md5-cbc-aes-caam)
[ 21.949862] alg: No test for echainiv(authenc(hmac(md5),cbc(aes)))
(echainiv-authenc-hmac-md5-cbc-aes-caam)
[ 22.025517] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes)))
(echainiv-authenc-hmac-sha1-cbc-aes-caam)
[ 22.044756] alg: No test for authenc(hmac(sha224),cbc(aes))
(authenc-hmac-sha224-cbc-aes-caam)
[ 22.057243] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes)))
(echainiv-authenc-hmac-sha224-cbc-aes-caam)
[ 22.098753] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes)))
(echainiv-authenc-hmac-sha256-cbc-aes-caam)
[ 22.112413] alg: No test for authenc(hmac(md5),cbc(des3_ede))
(authenc-hmac-md5-cbc-des3_ede-caam)
[ 22.121816] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede)))
(echainiv-authenc-hmac-md5-cbc-des3_ede-caam)
[ 22.151464] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede)))
(echainiv-authenc-hmac-sha1-cbc-des3_ede-caam)
[ 22.167047] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede)))
(echainiv-authenc-hmac-sha224-cbc-des3_ede-caam)
[ 22.182952] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede)))
(echainiv-authenc-hmac-sha256-cbc-des3_ede-caam)
[ 22.194830] alg: No test for authenc(hmac(md5),cbc(des))
(authenc-hmac-md5-cbc-des-caam)
[ 22.203213] alg: No test for echainiv(authenc(hmac(md5),cbc(des)))
(echainiv-authenc-hmac-md5-cbc-des-caam)
[ 22.218118] alg: No test for echainiv(authenc(hmac(sha1),cbc(des)))
(echainiv-authenc-hmac-sha1-cbc-des-caam)
[ 22.242306] alg: No test for echainiv(authenc(hmac(sha224),cbc(des)))
(echainiv-authenc-hmac-sha224-cbc-des-caam)
[ 22.270288] alg: No test for echainiv(authenc(hmac(sha256),cbc(des)))
(echainiv-authenc-hmac-sha256-cbc-des-caam)
[ 22.290231] alg: No test for authenc(hmac(md5),rfc3686(ctr(aes)))
(authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 22.307845] alg: No test for seqiv(authenc(hmac(md5),rfc3686(ctr(aes))))
(seqiv-authenc-hmac-md5-rfc3686-ctr-aes-caam)
[ 22.319294] alg: No test for seqiv(authenc(hmac(sha1),rfc3686(ctr(aes))))
(seqiv-authenc-hmac-sha1-rfc3686-ctr-aes-caam)
[ 22.341782] alg: No test for authenc(hmac(sha224),rfc3686(ctr(aes)))
(authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 22.357673] alg: No test for seqiv(authenc(hmac(sha224),rfc3686(ctr(aes))))
(seqiv-authenc-hmac-sha224-rfc3686-ctr-aes-caam)
[ 22.371309] alg: No test for seqiv(authenc(hmac(sha256),rfc3686(ctr(aes))))
(seqiv-authenc-hmac-sha256-rfc3686-ctr-aes-caam)
[ 22.382821] caam algorithms registered in /proc/crypto
[ 22.808916] caam 2100000.crypto: registering rng-caam
[ 22.816383] alg: No test for stdrng (prng-caam)
[ 22.821050] caam 2100000.crypto: rng crypto API alg registered prng-caam
[ 24.766776] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow
control off
[ 24.774402] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
Hardware : Freescale i.MX6 Quad/DualLite (Device Tree)
Revision : 0000
Device Tree model: SolidRun HummingBoard Dual/Quad
** Loaded modules:
caam_jr
caamhash_desc
caamalg_desc
crypto_engine
rng_core
authenc
libdes
imx6_media_csi(C)
evdev
dw_hdmi_cec
dw_hdmi_ahb_audio
v4l2_fwnode
snd_soc_imx_spdif
snd_soc_simple_card
snd_soc_simple_card_utils
snd_soc_imx_audmux
snd_soc_sgtl5000
caam
error
video_mux
imx_thermal
imx2_wdt
snd_soc_fsl_spdif
snd_soc_fsl_ssi
snd_soc_fsl_utils
imx_pcm_fiq
imx_pcm_dma
snd_soc_core
flexcan
can_dev
snd_pcm_dmaengine
imx6_media(C)
coda_vpu
snd_pcm
v4l2_jpeg
snd_timer
imx_vdoa
videobuf2_vmalloc
snd
imx_media_common(C)
soundcore
v4l2_mem2mem
videobuf2_dma_contig
v4l2_async
videobuf2_memops
dw_hdmi_imx
videobuf2_v4l2
dw_hdmi
videobuf2_common
videodev
drm_display_helper
etnaviv
imxdrm
mc
gpu_sched
drm_dma_helper
cec
imx_ipu_v3
drm_kms_helper
gpio_ir_recv
rc_core
imx6q_cpufreq
binfmt_misc
loop
fuse
drm
dm_mod
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
adin
ci_hdrc_imx
fec
selftests
ci_hdrc
ulpi
of_mdio
fixed_phy
fwnode_mdio
ahci_imx
roles
ehci_hcd
libahci_platform
libphy
libahci
udc_core
ptp
phy_generic
sdhci_esdhc_imx
nvmem_imx_ocotp
libata
sdhci_pltfm
cqhci
usbcore
i2c_imx
usbmisc_imx
pps_core
sdhci
mux_mmio
mux_core
scsi_mod
scsi_common
phy_mxs_usb
anatop_regulator
gpio_mxc
pwm_imx27
** Network interface configuration:
*** /etc/network/interfaces:
source /etc/network/interfaces.d/*
*** /etc/network/interfaces.d/eth0:
allow-hotplug eth0
iface eth0 inet dhcp
iface eth0 inet6 auto
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
group default qlen 1000
link/ether d2:63:b4:f8:26:d7 brd ff:ff:ff:ff:ff:ff
altname end0
inet 192.168.15.182/24 brd 192.168.15.255 scope global dynamic eth0
valid_lft 85643sec preferred_lft 85643sec
inet6 fd5e:fdfe:7cdb:0:d063:b4ff:fef8:26d7/64 scope global dynamic
mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::d063:b4ff:fef8:26d7/64 scope link
valid_lft forever preferred_lft forever
3: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN group default qlen 10
link/can
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 10001718 8128 0 0 0 0 0 0 383880
3876 0 0 0 0 0 0
can0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
** PCI devices:
00:00.0 PCI bridge [0604]: Synopsys, Inc. DWC_usb3 / PCIe bridge [16c3:abcd]
(rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 271
Region 0: Memory at 01000000 (32-bit, non-prefetchable) [size=1M]
Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
Expansion ROM at 01100000 [virtual] [disabled] [size=64K]
BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
** USB devices:
Bus 002 Device 002: ID 04b4:6570 Cypress Semiconductor Corp. Unprogrammed
CY7C65632/34 hub HX2VL
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 12.1
APT prefers stable-security
APT policy: (500, 'stable-security'), (500, 'stable')
Architecture: armhf (armv7l)
Kernel: Linux 6.1.0-10-armmp (SMP w/2 CPU threads)
Kernel taint flags: TAINT_CRAP
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-6.1.0-10-armmp depends on:
ii initramfs-tools [linux-initramfs-tool] 0.142
ii kmod 30+20221128-1
ii linux-base 4.9
Versions of packages linux-image-6.1.0-10-armmp recommends:
pn apparmor <none>
pn firmware-linux-free <none>
Versions of packages linux-image-6.1.0-10-armmp suggests:
pn debian-kernel-handbook <none>
pn linux-doc-6.1 <none>
Versions of packages linux-image-6.1.0-10-armmp is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20230210-5
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
ii firmware-ti-connectivity 20230210-5
pn xen-hypervisor <none>
-- no debconf information
>From a574619aaa61b2c9a88e30ab79e20459410dd080 Mon Sep 17 00:00:00 2001
From: Josua Mayer <jo...@solid-run.com>
Date: Thu, 3 Aug 2023 15:18:57 +0300
Subject: [PATCH] enable driver for adin1300 ethernet phy
Signed-off-by: Josua Mayer <jo...@solid-run.com>
---
debian/config/config | 1 +
1 file changed, 1 insertion(+)
diff --git a/debian/config/config b/debian/config/config
index 521caee707..0f19c952c6 100644
--- a/debian/config/config
+++ b/debian/config/config
@@ -3769,6 +3769,7 @@ CONFIG_LED_TRIGGER_PHY=y
# CONFIG_FIXED_PHY is not set
CONFIG_SFP=m
CONFIG_AMD_PHY=m
+CONFIG_ADIN_PHY=m
CONFIG_AQUANTIA_PHY=m
# CONFIG_AX88796B_PHY is not set
CONFIG_BROADCOM_PHY=m
--
2.35.3
>From a574619aaa61b2c9a88e30ab79e20459410dd080 Mon Sep 17 00:00:00 2001
From: Josua Mayer <jo...@solid-run.com>
Date: Thu, 3 Aug 2023 15:18:57 +0300
Subject: [PATCH] enable driver for adin1300 ethernet phy
Signed-off-by: Josua Mayer <jo...@solid-run.com>
---
debian/config/config | 1 +
1 file changed, 1 insertion(+)
diff --git a/debian/config/config b/debian/config/config
index 521caee707..0f19c952c6 100644
--- a/debian/config/config
+++ b/debian/config/config
@@ -3769,6 +3769,7 @@ CONFIG_LED_TRIGGER_PHY=y
# CONFIG_FIXED_PHY is not set
CONFIG_SFP=m
CONFIG_AMD_PHY=m
+CONFIG_ADIN_PHY=m
CONFIG_AQUANTIA_PHY=m
# CONFIG_AX88796B_PHY is not set
CONFIG_BROADCOM_PHY=m
--
2.35.3
--- End Message ---
--- Begin Message ---
Source: linux
Source-Version: 6.7.1-1~exp1
Done: Bastian Blank <wa...@debian.org>
We believe that the bug you reported is fixed in the latest version of
linux, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 1043...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Bastian Blank <wa...@debian.org> (supplier of updated linux package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Mon, 22 Jan 2024 09:50:46 +0100
Source: linux
Architecture: source
Version: 6.7.1-1~exp1
Distribution: experimental
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Bastian Blank <wa...@debian.org>
Closes: 1043354 1055442
Changes:
linux (6.7.1-1~exp1) experimental; urgency=medium
.
* New upstream stable update:
https://www.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.7.1
.
[ Salvatore Bonaccorso ]
* Enable bcachefs filesystem support
- fs/bcachefs: Enable BCACHEFS_FS as module
- fs/bcachefs: Enable BCACHEFS_QUOTA
- fs/bcachefs: Enable BCACHEFS_POSIX_ACL
* media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)
.
[ Aurelien Jarno ]
* [riscv64] Enable ARCH_SOPHGO and ARCH_THEAD.
* [riscv64] Disable ARCH_R9A07G043 as it now depends on NONPORTABLE.
* [riscv64] Enable PHY_STARFIVE_JH7110_DPHY_RX, PHY_STARFIVE_JH7110_PCIE and
PHY_STARFIVE_JH7110_USB as modules.
* [powerpc,ppc64,ppc64el] Drop ipddp from nic-modules.
* [riscv64] Enable LEDS_PWM and LEDS_PWM_MULTICOLOR as modules.
.
[ Vincent Blut ]
* [arm64, armhf] drivers/net/phy: Enable ADIN_PHY as module
(Closes: #1043354)
.
[ Martin Kepplinger ]
* [arm64] Enable CSI camera stack for i.MX8M SoCs (Closes: #1055442)
.
[ Tim Pambor ]
* Enable configs for MT8195 Chromebooks:
- COMMON_CLK_MT8195 as built-in
- COMMON_CLK_MT8195_APUSYS, COMMON_CLK_MT8195_AUDSYS,
COMMON_CLK_MT8195_IMP_IIC_WRAP, COMMON_CLK_MT8195_MFGCFG,
COMMON_CLK_MT8195_MSDC, COMMON_CLK_MT8195_SCP_ADSP,
COMMON_CLK_MT8195_VDOSYS, COMMON_CLK_MT8195_VPPSYS,
COMMON_CLK_MT8195_CAMSYS, COMMON_CLK_MT8195_IMGSYS,
COMMON_CLK_MT8195_WPESYS, COMMON_CLK_MT8195_VDECSYS,
COMMON_CLK_MT8195_VENCSYS as modules
- MFD_MT6360, REGULATOR_MT6315, REGULATOR_MT6359,
REGULATOR_CROS_EC, MTK_LVTS_THERMAL as modules
- MTK_ADSP_MBOX, MTK_ADSP_IPC, SND_SOC_SOF_OF, SND_SOC_MT8195,
SND_SOC_MT8195_MT6359, SND_SOC_SOF_MT8195 as modules
- SND_SOC_SOF_TOPLEVEL, SND_SOC_SOF_MTK_TOPLEVEL as built-in
- DRM_MEDIATEK_DP, PHY_MTK_DP, PHY_MTK_PCIE, PHY_MTK_UFS as modules
- PINCTRL_MT8195, PCIE_MEDIATEK_GEN3, SPMI_MTK_PMIF as built-in
.
[ Zhang Ning ]
* [arm64] drivers/rtc: Enable RTC_DRV_RS5C372 as module
.
[ Bastian Blank ]
* Revert "Run dh_movetousr also in signed images."
* Fix config specified CFLAGS on kernel builds. Also drop old definitions
that have not worked for a long time.
* Disable ability to do binNMU. The Debian infrastructure is not ready
to binNMU signed packages. But they instead just break the dependencies
within this package.
* Restructure and cleanup complete config:
- Uses TOML instead of our home-grown INI based format.
- Don't export a config dump anymore, it is not longer in use.
* Generate and ship vmlinux.h in linux-headers package.
.
[ Emanuele Rocca ]
* [arm64] Set QCOM_QSEECOM and QCOM_QSEECOM_UEFISECAPP to 'y' in order to
add support for EFI variables on the Lenovo X13s.
.
[ Martyn Welch ]
* [arm64] Support HDMI output on TI SK-AM62. Enable DRM_SII902X and
DRM_TIDSS as modules.
Checksums-Sha1:
7afaf012de8d6a93f29edff8ff0f3a1f275cb12c 215569 linux_6.7.1-1~exp1.dsc
873ccccdcf404dbe8e67e64b6505fde77b2d9a5e 144105644 linux_6.7.1.orig.tar.xz
e41d009e55832b06ead3d18428d3c7a4e36a1754 1496696
linux_6.7.1-1~exp1.debian.tar.xz
5cdecd12b38828ae7253c9d7ff28314fb5a9aad3 6485
linux_6.7.1-1~exp1_source.buildinfo
Checksums-Sha256:
683032e0cad923f6f73081c4be71b711acbae99d2749e9f6cebe5ad70441601b 215569
linux_6.7.1-1~exp1.dsc
4b6cf26881103d8431117ef850428737c25c0b45a7d5fef7e6f6b4fabe3c7bcf 144105644
linux_6.7.1.orig.tar.xz
3671c0792176a411e0b7d01a0e318827e94bd673d9878c4970d16cfecaab9e03 1496696
linux_6.7.1-1~exp1.debian.tar.xz
5702e8140e3b315d29ca2eaa03629a364126900d323f30d54aeb54f3ea84fe79 6485
linux_6.7.1-1~exp1_source.buildinfo
Files:
0bc0ed03e056aed6d797bc33403a2afb 215569 kernel optional linux_6.7.1-1~exp1.dsc
531fa8e6155de7c8b452cfebf261eac9 144105644 kernel optional
linux_6.7.1.orig.tar.xz
168caa9429824a0fe3f0635e1f23a17e 1496696 kernel optional
linux_6.7.1-1~exp1.debian.tar.xz
1066590dc8c4372df925b5ae8525d3ba 6485 kernel optional
linux_6.7.1-1~exp1_source.buildinfo
-----BEGIN PGP SIGNATURE-----
iHUEARYIAB0WIQQ8pEKDNIgQDAQDOBFji0aBW7swjwUCZa43TAAKCRBji0aBW7sw
j+owAP4+yuCcNmMzbmM7cVFgn89MUx/ELvnLWsbVOxaDDnQOGQEA+Ko948VEubSx
xUI4IJoHVSfeRNUCoL5lt0YpxRNOSQc=
=FTXu
-----END PGP SIGNATURE-----
--- End Message ---
