Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-13
Followup-For: Bug #501326


I am using suspend to disk.

The /sys/power/disk is set to platform and does not work when set to
shutdown either.

The PC powers off for a few seconds and then powers on again.


It does not work with 2.6.25 either. However, the problem started only
recently, suspend to disk used to work.

It is possible to power off by holding the power button or by booting
other system and powering off using that.


-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (wa...@debian.org) (gcc version 
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 
2009

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 
root=UUID=ae7d5095-c8b3-4205-af0e-032b0e124ec3 ro

** Not tainted

** Kernel log:
[  168.464445] PM: Writing back config space on device 0000:00:1b.0 at offset 1 
(was 100006, writing 100002)
[  168.464466] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> 
IRQ 19
[  168.464473] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[  168.464542] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[  168.464600] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[  168.464609] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> 
IRQ 20
[  168.464615] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[  168.464660] usb usb1: root hub lost power or was reset
[  168.464678] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> 
IRQ 17
[  168.464684] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[  168.464734] usb usb2: root hub lost power or was reset
[  168.464761] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[  168.464765] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[  168.464804] usb usb3: root hub lost power or was reset
[  168.464820] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> 
IRQ 19
[  168.464825] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[  168.464864] usb usb4: root hub lost power or was reset
[  168.464889] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> 
IRQ 20
[  168.464894] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[  168.464931] usb usb5: root hub lost power or was reset
[  168.468816] ehci_hcd 0000:00:1d.7: debug port 1
[  168.468822] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[  168.468856] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[  168.468913] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> 
IRQ 18
[  168.468938] PM: Writing back config space on device 0000:00:1f.2 at offset 1 
(was 2b00001, writing 2b00005)
[  168.468951] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> 
IRQ 17
[  168.468955] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[  168.471738] ata2.01: _GTF evaluation failed (AE 0x1001)
[  168.484447] PM: Writing back config space on device 0000:02:00.0 at offset 1 
(was 100002, writing 100006)
[  168.484476] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[  168.484484] PCI: Setting latency timer of device 0000:02:00.0 to 64
[  168.492912] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[  168.561175] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  
MMIO=[cfeff800-cfefffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[  168.568294] parport_pc 00:06: current resources: pnp_start_dev
[  168.568297] parport_pc 00:06:   irq 7 flags 0x401
[  168.568299] parport_pc 00:06:   dma 3 flags 0x800
[  168.568301] parport_pc 00:06:   io  0x378-0x37f flags 0x101
[  168.568303] parport_pc 00:06:   io  0x778-0x77f flags 0x101
[  168.568306] parport_pc 00:06: set resources
[  168.569714] parport_pc 00:06: encode 4 resources
[  168.569718] parport_pc 00:06:   encode irq 7 edge high exclusive (2-byte 
descriptor)
[  168.569721] parport_pc 00:06:   encode dma 3 type 0x0 transfer 0x0 master 0
[  168.569723] parport_pc 00:06:   encode io 0x378-0x37f decode 0x1
[  168.569725] parport_pc 00:06:   encode io 0x778-0x77f decode 0x1
[  168.570488] parport_pc 00:06: activated
[  168.570495] serial 00:0d: current resources: pnp_start_dev
[  168.570497] serial 00:0d:   irq 4 flags 0x401
[  168.570500] serial 00:0d:   io  0x3f8-0x3ff flags 0x101
[  168.570503] serial 00:0d: set resources
[  168.571217] serial 00:0d: encode 3 resources
[  168.571220] serial 00:0d:   encode irq 4 edge high exclusive (2-byte 
descriptor)
[  168.571223] serial 00:0d:   encode dma -1 type 0x0 transfer 0x0 master 0
[  168.571225] serial 00:0d:   encode io 0x3f8-0x3ff decode 0x1
[  168.571929] serial 00:0d: activated
[  168.643329] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[  168.643333] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[  168.644014] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[  168.644014] ata1.00: ACPI cmd ef/90:06:00:00:00:00 succeeded
[  168.658119] ata2.01: configured for UDMA/133
[  168.658185] sd 1:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[  168.658209] sd 1:0:1:0: [sdb] Write Protect is off
[  168.658213] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[  168.658251] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[  168.666807] ata1.00: configured for UDMA/133
[  168.690772] ata1.00: configured for UDMA/133
[  168.690775] ata1: EH complete
[  168.690817] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
[  168.690841] sd 0:0:0:0: [sda] Write Protect is off
[  168.690844] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  168.690881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[  168.690916] sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
[  168.690938] sd 0:0:0:0: [sda] Write Protect is off
[  168.690941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  168.690978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[  169.452122] sd 0:0:0:0: [sda] Starting disk
[  169.466005] sd 1:0:1:0: [sdb] Starting disk
[  169.479474] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[  169.479656] hda: UDMA/66 mode selected
[  169.479857] PCI: Setting latency timer of device 0000:00:02.0 to 64
[  169.518667] Restarting tasks ... <6>usb 2-1: USB disconnect, address 4
[  169.524031] done.
[  169.856073] usb 2-1: new low speed USB device using uhci_hcd and address 5
[  170.033258] usb 2-1: configuration #1 chosen from 1 choice
[  170.064583] input: Tangtop Generic USBPS2 as /class/input/input10
[  170.088156] input,hidraw0: USB HID v1.00 Keyboard [Tangtop Generic USBPS2] 
on usb-0000:00:1d.1-1
[  170.116894] input: Tangtop Generic USBPS2 as /class/input/input11
[  170.160081] input,hidraw1: USB HID v1.00 Mouse [Tangtop Generic USBPS2] on 
usb-0000:00:1d.1-1
[  170.165312] usb 2-1: New USB device found, idVendor=0d3d, idProduct=0001
[  170.165360] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  170.165400] usb 2-1: Product: Generic USBPS2
[  170.165436] usb 2-1: Manufacturer: Tangtop
[  170.165505] usb 4-2: USB disconnect, address 3
[  170.432049] usb 4-2: new low speed USB device using uhci_hcd and address 4
[  170.604023] usb 4-2: configuration #1 chosen from 1 choice
[  170.624473] input: Logitech USB Trackball as /class/input/input12
[  170.656083] input,hidraw2: USB HID v1.10 Mouse [Logitech USB Trackball] on 
usb-0000:00:1d.3-2
[  170.656326] usb 4-2: New USB device found, idVendor=046d, idProduct=c408
[  170.656365] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  170.656405] usb 4-2: Product: USB Trackball
[  170.656441] usb 4-2: Manufacturer: Logitech

** Loaded modules:
Module                  Size  Used by
i915                   35072  2 
drm                    91488  3 i915
binfmt_misc            13580  1 
ppdev                  11656  0 
lp                     14724  0 
ipv6                  288328  24 
reiserfs              211072  1 
coretemp               11008  0 
w83627ehf              26512  0 
hwmon_vid               7296  1 w83627ehf
loop                   19468  0 
parport_pc             31016  1 
parport                41776  3 ppdev,lp,parport_pc
psmouse                42268  0 
serio_raw               9860  0 
snd_hda_intel         434904  0 
i2c_i801               13596  0 
i2c_core               27936  1 i2c_i801
snd_pcm_oss            41760  0 
snd_mixer_oss          18816  1 snd_pcm_oss
snd_pcm                81672  2 snd_hda_intel,snd_pcm_oss
rng_core                8968  0 
iTCO_wdt               15696  0 
snd_seq_dummy           7428  0 
snd_seq_oss            33152  0 
snd_seq_midi           11072  0 
snd_rawmidi            26784  1 snd_seq_midi
snd_seq_midi_event     11904  2 snd_seq_oss,snd_seq_midi
snd_seq                54304  6 
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              25744  2 snd_pcm,snd_seq
snd_seq_device         11668  5 
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    63688  9 
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              12064  1 snd
snd_page_alloc         13072  2 snd_hda_intel,snd_pcm
button                 11680  0 
intel_agp              31728  1 
joydev                 14848  0 
evdev                  14208  5 
ext3                  125072  4 
jbd                    51240  1 ext3
mbcache                12804  1 ext3
ide_cd_mod             36360  0 
cdrom                  37928  1 ide_cd_mod
usbhid                 45792  0 
hid                    41792  1 usbhid
ff_memless              9224  1 usbhid
sd_mod                 29376  8 
piix                   12424  0 [permanent]
ide_pci_generic         9220  0 [permanent]
ide_core              128284  3 ide_cd_mod,piix,ide_pci_generic
ata_piix               22660  8 
ohci1394               32564  0 
ieee1394               93816  1 ohci1394
ata_generic            10116  0 
libata                165472  2 ata_piix,ata_generic
scsi_mod              160760  2 sd_mod,libata
dock                   14112  1 libata
ehci_hcd               36108  0 
uhci_hcd               25760  0 
atl1                   35464  0 
mii                     9856  1 atl1
thermal                22688  0 
processor              42304  1 thermal
fan                     9352  0 
thermal_sys            17728  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller 
Hub [8086:2770] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ 
Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA 
controller])
        Subsystem: ASUSTeK Computer Inc. Device [1043:817a]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at cfd00000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at 8800 [size=8]
        Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at cfd80000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <access denied>
        Kernel modules: intelfb

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller [8086:27d8] (rev 01)
        Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at cfdf8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 16 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 16 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: cff00000-cfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 9000 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 9400 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 9800 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 19
        Region 4: I/O ports at a000 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at cfdffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
e1) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: cfe00000-cfefffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge [8086:27b8] (rev 01)
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE 
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Kernel driver in use: PIIX_IDE
        Kernel modules: ata_generic, ide-pci-generic, piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) 
SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP 
PriO])
        Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at b800 [size=8]
        Region 1: I/O ports at b400 [size=4]
        Region 2: I/O ports at b000 [size=8]
        Region 3: I/O ports at a800 [size=4]
        Region 4: I/O ports at a400 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: ata_piix
        Kernel modules: ata_generic, ata_piix, ide-pci-generic

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
[8086:27da] (rev 01)
        Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 0400 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c-i801

01:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 
1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns max), Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at cfeff800 (32-bit, non-prefetchable) [size=2K]
        Region 1: I/O ports at c800 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: ohci1394
        Kernel modules: ohci1394

02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit 
Ethernet Adapter [1969:1048] (rev b0)
        Subsystem: ASUSTeK Computer Inc. Device [1043:8226]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 1277
        Region 0: Memory at cffc0000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at cffa0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: atl1
        Kernel modules: atl1



-- System Information:
Debian Release: 5.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

linux-image-2.6.26-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii  grub-pc [grub]          1.96+20080724-12 GRand Unified Bootloader, version 
pn  linux-doc-2.6.26        <none>           (no description available)

-- debconf-show failed



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to