Package: linux-2.6
Version: 2.6.32-18
Severity: important
File: linux-image-2.6.32-5

After the grub window I see a few lines and then the display flicker. I
do not have this problem with linux-image-2.6.32-3

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 8440p
product_version:  
chassis_vendor: Hewlett-Packard
chassis_version: 
bios_vendor: Hewlett-Packard
bios_version: 68CCU Ver. F.05
board_vendor: Hewlett-Packard
board_name: 172B
board_version: KBC Version 30.29

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller 
[8086:0044] (rev 12)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 
Root Port [8086:0045] (rev 12) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00005000-00005fff
        Memory behind bridge: d2000000-d30fffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series 
Chipset HECI Controller [8086:3b64] (rev 06)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d7428000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>

00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series 
Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550])
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at 6050 [size=8]
        Region 1: Memory at d7426000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network 
Connection [8086:10ea] (rev 06)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 33
        Region 0: Memory at d7400000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at d7425000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 6020 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d7427c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset 
High Definition Audio [8086:3b56] (rev 06)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d7420000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: d7300000-d73fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
        I/O behind bridge: 00003000-00004fff
        Memory behind bridge: d3300000-d72fffff
        Prefetchable memory behind bridge: 00000000d7600000-00000000d77fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI 
Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=44, subordinate=44, sec-latency=0
        Memory behind bridge: d3200000-d32fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset 
USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at d7427800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev a6) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=45, subordinate=49, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d3100000-d31fffff
        Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC 
Interface Controller [8086:3b07] (rev 06)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 
6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0])
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 34
        Region 0: I/O ports at 6048 [size=8]
        Region 1: I/O ports at 605c [size=4]
        Region 2: I/O ports at 6040 [size=8]
        Region 3: I/O ports at 6058 [size=4]
        Region 4: I/O ports at 6000 [size=32]
        Region 5: Memory at d7427000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 
Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 10
        Region 0: Memory at d7424000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [NVS 3100M] 
[10de:0a6c] (rev a2) (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
        Region 5: I/O ports at 5000 [size=128]
        [virtual] Expansion ROM at d3080000 [disabled] [size=512K]
        Capabilities: <access denied>
        Kernel driver in use: nvidia

01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio 
Controller [10de:0be3] (rev a1)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d3000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

44:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 
[8086:4238] (rev 35)
        Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN 
[8086:1111]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 35
        Region 0: Memory at d3200000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlagn

45:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller 
[1180:0832] (rev 06) (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at d3101000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci

45:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro 
Host Adapter [1180:0822] (rev 25)
        Subsystem: Hewlett-Packard Company Device [103c:172b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at d3101900 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: sdhci-pci

45:06.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller 
[1180:0843] (rev bb)
        !!! Invalid class 0880 for header type 02
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at d3101800 (32-bit, non-prefetchable) [size=256]
        Bus: primary=45, secondary=46, subordinate=49, sec-latency=176
        Memory window 0: d8000000-dbfff000 (prefetchable)
        Memory window 1: dc000000-dffff000
        I/O window 0: 00002000-000020ff
        I/O window 1: 00002400-000024ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite-
        <access denied to the rest>
        Kernel driver in use: ricoh-mmc

45:06.3 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ff) 
(prog-if ff)
        !!! Unknown header type 7f
        Kernel driver in use: yenta_cardbus

ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath 
Architecture Generic Non-core Registers [8086:2c62] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath 
Architecture System Address Decoder [8086:2d01] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 
[8086:2d10] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 
[8086:2d11] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved 
[8086:2d12] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0

ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved 
[8086:2d13] (rev 02)
        Subsystem: Intel Corporation Device [8086:8086]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0


** USB devices:
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 011: ID 05e3:1107 Genesys Logic, Inc. 
Bus 001 Device 010: ID 0403:6001 Future Technology Devices International, Ltd 
FT232 USB-Serial (UART) IC
Bus 001 Device 009: ID 05e3:1106 Genesys Logic, Inc. 
Bus 001 Device 008: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 001 Device 007: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 006: ID 04f2:b15e Chicony Electronics Co., Ltd 
Bus 001 Device 005: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 004: ID 138a:0007 DigitalPersona, Inc 
Bus 001 Device 003: ID 03f0:231d Hewlett-Packard 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (750, 'testing'), (700, 'unstable'), (600, 'stable'), (500, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-3-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.33     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.97.2     tools for generating an initramfs
ii  linux-base                    2.6.32-18  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-18  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: 
true
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/20100809062028.4294.57665.report...@entwicklung03

Reply via email to