--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-20
Severity: normal
Samsung N150-11 netbook. Each lid close&open toggles the lid switch state
so when the lid is open, half the time it reports closed:
e@eSammy:~$ cat /proc/acpi/button/lid/LID0/state
state: open
# close & open lid
e@eSammy:~$ cat /proc/acpi/button/lid/LID0/state
state: closed
So, the netbook only suspends every other time the lid is closed.
This could be dangerous with the netbook stowed in running mode
getting hot.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=3cb206a7-b396-4c4f-b462-cd89b27eb3c4 ro quiet
** Not tainted
** Kernel log:
[ 1050.208993] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[ 1050.209058] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was
0x200, writing 0x204)
[ 1050.209078] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was
0x10001, writing 0x40514041)
[ 1050.209089] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was
0x0, writing 0x40304020)
[ 1050.209100] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was
0x20000000, writing 0x4040)
[ 1050.209117] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was
0x810000, writing 0x810008)
[ 1050.209129] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[ 1050.209189] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was
0x40300, writing 0x40303)
[ 1050.209208] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was
0x10001, writing 0x40714061)
[ 1050.209220] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was
0x0, writing 0xf020f020)
[ 1050.209231] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was
0x20000000, writing 0x2020)
[ 1050.209247] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was
0x810000, writing 0x810008)
[ 1050.209260] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[ 1050.209319] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was
0x400, writing 0x40a)
[ 1050.209339] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was
0x10001, writing 0x40b140a1)
[ 1050.209350] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was
0x0, writing 0x40904080)
[ 1050.209361] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was
0x20000000, writing 0x5050)
[ 1050.209377] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was
0x810000, writing 0x810008)
[ 1050.209390] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[ 1050.209462] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 1050.209506] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 1050.209549] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 1050.209591] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was
0x2800005, writing 0x2800001)
[ 1050.209643] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900106, writing 0x2900102)
[ 1050.209686] pci 0000:00:1e.0: restoring config space at offset 0x9 (was
0x10001, writing 0x1fff1)
[ 1050.209697] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0,
writing 0xfff0)
[ 1050.209783] ahci 0000:00:1f.2: restoring config space at offset 0xf (was
0x200, writing 0x20a)
[ 1050.209815] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00007, writing 0x2b00407)
[ 1050.209924] ath9k 0000:05:00.0: restoring config space at offset 0xf (was
0x1ff, writing 0x10b)
[ 1050.209959] ath9k 0000:05:00.0: restoring config space at offset 0x4 (was
0x4, writing 0xf0100004)
[ 1050.209971] ath9k 0000:05:00.0: restoring config space at offset 0x3 (was
0x0, writing 0x8)
[ 1050.209985] ath9k 0000:05:00.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100107)
[ 1050.210270] sky2 0000:09:00.0: restoring config space at offset 0xf (was
0x100, writing 0x103)
[ 1050.210406] sky2 0000:09:00.0: restoring config space at offset 0x6 (was
0x1, writing 0x2001)
[ 1050.210459] sky2 0000:09:00.0: restoring config space at offset 0x4 (was
0x4, writing 0xf0200004)
[ 1050.210488] sky2 0000:09:00.0: restoring config space at offset 0x3 (was
0x0, writing 0x8)
[ 1050.210541] sky2 0000:09:00.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100507)
[ 1050.222997] i915 0000:00:02.0: setting latency timer to 64
[ 1050.223545] [drm] Big FIFO is enabled
[ 1050.292089] [drm] Big FIFO is enabled
[ 1050.292109] [drm] Big FIFO is enabled
[ 1050.292280] [drm] Big FIFO is enabled
[ 1050.316212] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 1050.316222] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 1050.414284] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1050.414295] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1050.414328] usb usb2: root hub lost power or was reset
[ 1050.414360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1050.414374] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1050.414409] usb usb3: root hub lost power or was reset
[ 1050.414442] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1050.414457] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1050.414491] usb usb4: root hub lost power or was reset
[ 1050.414524] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1050.414537] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1050.414564] usb usb5: root hub lost power or was reset
[ 1050.414596] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1050.414608] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1050.414664] pci 0000:00:1e.0: setting latency timer to 64
[ 1050.414687] ahci 0000:00:1f.2: setting latency timer to 64
[ 1050.414913] ath9k 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1050.548069] sd 0:0:0:0: [sda] Starting disk
[ 1050.732075] ata4: SATA link down (SStatus 0 SControl 300)
[ 1050.732107] ata3: SATA link down (SStatus 0 SControl 300)
[ 1050.732142] ata2: SATA link down (SStatus 0 SControl 300)
[ 1052.188069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1052.207396] ata1.00: configured for UDMA/133
[ 1052.340057] usb 1-8: reset high speed USB device using ehci_hcd and address 2
[ 1052.486313] PM: Finishing wakeup.
[ 1052.486318] Restarting tasks ... done.
[ 1052.817687] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1052.826920] sky2 eth0: enabling interface
[ 1052.827869] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1058.715555] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be
trying access hardware directly.
[ 1059.387947] CPU0 attaching NULL sched-domain.
[ 1059.387964] CPU1 attaching NULL sched-domain.
[ 1059.420205] CPU0 attaching sched-domain:
[ 1059.420217] domain 0: span 0-1 level SIBLING
[ 1059.420227] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 1059.420249] domain 1: span 0-1 level MC
[ 1059.420257] groups: 0-1 (cpu_power = 1178)
[ 1059.420277] CPU1 attaching sched-domain:
[ 1059.420285] domain 0: span 0-1 level SIBLING
[ 1059.420293] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 1059.420313] domain 1: span 0-1 level MC
[ 1059.420321] groups: 0-1 (cpu_power = 1178)
[ 1059.794280] CPUFREQ: Per core ondemand sysfs interface is deprecated -
up_threshold
[ 1060.792406] wlan0: direct probe to AP 00:13:10:6a:0e:bb (try 1)
[ 1060.795190] wlan0: direct probe responded
[ 1060.795200] wlan0: authenticate with AP 00:13:10:6a:0e:bb (try 1)
[ 1060.799217] wlan0: authenticated
[ 1060.799276] wlan0: associate with AP 00:13:10:6a:0e:bb (try 1)
[ 1060.801980] wlan0: RX AssocResp from 00:13:10:6a:0e:bb (capab=0x431 status=0
aid=5)
[ 1060.801991] wlan0: associated
[ 1060.802608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1070.860039] wlan0: no IPv6 routers present
[ 4301.869590] [drm] Big FIFO is enabled
[ 4301.940079] [drm] Big FIFO is enabled
[ 4301.940103] [drm] Big FIFO is enabled
[ 4302.273843] [drm] Big FIFO is enabled
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: N150P/N210P/N220P
product_version: Not Applicable
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: Phoenix Technologies Ltd.
bios_version: 01KY.M008.20100430.RHU
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: N150P/N210P/N220P
board_version: Not Applicable
** Loaded modules:
Module Size Used by
easy_slow_down_manager 3953 0
sco 7209 2
bridge 39598 0
stp 1440 1 bridge
bnep 9427 2
rfcomm 29581 0
l2cap 24736 6 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
acpi_cpufreq 5555 0
cpufreq_userspace 1992 0
cpufreq_stats 2659 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
fuse 50190 1
loop 11783 0
snd_hda_codec_realtek 235522 1
snd_hda_intel 19987 3
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 2 snd_pcm_oss
arc4 1274 2
snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ecb 1841 2
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
uvcvideo 51887 0
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
videodev 29993 1 uvcvideo
ath9k 249912 0
v4l1_compat 11442 2 uvcvideo,videodev
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
mac80211 136956 1 ath9k
v4l2_compat_ioctl32 8538 1 videodev
snd 46446 15
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ath 8006 1 ath9k
i915 254567 2
soundcore 4598 2 snd
drm_kms_helper 20065 1 i915
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
drm 142551 3 i915,drm_kms_helper
cfg80211 101464 3 ath9k,mac80211,ath
i2c_i801 7830 0
i2c_algo_bit 4225 1 i915
i2c_core 15712 6
videodev,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
serio_raw 3752 0
video 17445 1 i915
rfkill 13044 3 bluetooth,cfg80211
samsung_backlight 2740 0
pcspkr 1699 0
evdev 7352 13
output 1692 1 video
psmouse 49777 0
led_class 2433 1 ath9k
button 4650 1 i915
battery 4998 0
ac 2192 0
processor 30247 3 acpi_cpufreq
ext3 106518 1
jbd 37085 1 ext3
mbcache 5050 1 ext3
sd_mod 29777 3
crc_t10dif 1276 1 sd_mod
ahci 32358 2
uhci_hcd 18521 0
libata 133584 1 ahci
thermal 11674 0
sky2 39278 0
ehci_hcd 31135 0
scsi_mod 122117 2 sd_mod,libata
usbcore 121943 4 uvcvideo,uhci_hcd,ehci_hcd
thermal_sys 11942 3 video,processor,thermal
nls_base 6361 1 usbcore
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN qlen 1000
link/ether 00:24:54:a1:66:b5 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 78:e4:00:50:26:9e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.108/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::7ae4:ff:fe50:269e/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 9a:ec:24:ff:7c:a2 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 89392 1088 0 0 0 0 0 0 89392
1088 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 816593 2354 0 0 0 0 0 0 157688
987 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
3741 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
2732 incoming packets delivered
1898 requests sent out
5 dropped because of missing route
Icmp:
544 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 544
544 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 544
IcmpMsg:
InType3: 544
OutType3: 544
Tcp:
17 active connections openings
0 passive connection openings
0 failed connection attempts
2 connection resets received
1 connections established
456 segments received
328 segments send out
12 segments retransmited
0 bad segments received.
10 resets sent
Udp:
770 packets received
544 packets to unknown port received.
0 packet receive errors
1007 packets sent
UdpLite:
TcpExt:
1 TCP sockets finished time wait in fast timer
10 delayed acks sent
Quick ack mode was activated 8 times
166 packet headers predicted
111 acknowledgments not containing data payload received
6 predicted acknowledgments
2 congestion windows recovered without slow start after partial ack
5 other TCP timeouts
8 DSACKs sent for old packets
2 connections reset due to early user close
1 connections aborted due to timeout
1 times unabled to send RST due to no memory
IpExt:
InMcastPkts: 56
OutMcastPkts: 48
InBcastPkts: 1095
OutBcastPkts: 386
InOctets: 927587
OutOctets: 198424
InMcastOctets: 12742
OutMcastOctets: 10654
InBcastOctets: 135942
OutBcastOctets: 51724
*** Device features:
eth0: 0x10823
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 18d0 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012]
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0380000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0100000-f01fffff
Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 40200000-403fffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f02fffff
Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 40800000-409fffff
Prefetchable memory behind bridge: 0000000040a00000-0000000040bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0604000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=11, subordinate=11, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI
Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 18e8 [size=8]
Region 1: I/O ports at 18dc [size=4]
Region 2: I/O ports at 18e0 [size=8]
Region 3: I/O ports at 18d8 [size=4]
Region 4: I/O ports at 18c0 [size=16]
Region 5: Memory at f0604400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller
[8086:27da] (rev 02)
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
05:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless
Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e025]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E
Fast Ethernet Controller [11ab:4354]
Subsystem: Samsung Electronics Co Ltd Device [144d:c072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0ac8:c33f Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98 tools for generating an initramfs
ii linux-base 2.6.32-20 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-20 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
ii firmware-ipw2x00 0.26 Binary firmware for Intel Pro Wire
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless
ii firmware-linux 0.26 Binary firmware for various driver
ii firmware-linux-nonfree 0.26 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.26 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64:
true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---