--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-3
Severity: minor
After/deuring the installation of syslog-ng I found the attached trace
in dmesg!
-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-3) (b...@decadent.org.uk) (gcc
version 4.4.6 (Debian 4.4.6-6) ) #1 SMP Tue Jul 5 03:48:49 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae
root=UUID=1966c3fd-e26b-4591-83ba-64f2b8c11317 ro panic=10
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 1.401132] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.401192] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 1.427143] libata version 3.00 loaded.
[ 1.428096] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005020
[ 1.428199] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.428255] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.428318] usb usb3: Product: UHCI Host Controller
[ 1.428369] usb usb3: Manufacturer: Linux 2.6.39-2-686-pae uhci_hcd
[ 1.428423] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.428615] hub 3-0:1.0: USB hub found
[ 1.428673] hub 3-0:1.0: 2 ports detected
[ 1.431810] ata_piix 0000:00:1f.1: version 2.13
[ 1.431825] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.431906] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.432065] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.432634] scsi0 : ata_piix
[ 1.432863] scsi1 : ata_piix
[ 1.432996] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
[ 1.433056] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
[ 1.471900] tg3 0000:02:02.0: eth0: Tigon3 [partno(349321-001) rev 2100]
(PCIX:66MHz:64-bit) MAC address 00:14:38:ee:9c:36
[ 1.471973] tg3 0000:02:02.0: eth0: attached PHY is 5704 (10/100/1000Base-T
Ethernet) (WireSpeed[1])
[ 1.472070] tg3 0000:02:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1]
TSOcap[0]
[ 1.472136] tg3 0000:02:02.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 1.472223] tg3 0000:02:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
[ 1.572955] tg3 0000:02:02.1: eth1: Tigon3 [partno(349321-001) rev 2100]
(PCIX:66MHz:64-bit) MAC address 00:14:38:ee:7c:55
[ 1.573037] tg3 0000:02:02.1: eth1: attached PHY is 5704 (10/100/1000Base-T
Ethernet) (WireSpeed[1])
[ 1.573109] tg3 0000:02:02.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
TSOcap[1]
[ 1.573176] tg3 0000:02:02.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit]
[ 1.573312] cciss 0000:02:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 1.573487] cciss 0000:02:01.0: Controller reports max supported commands of
0, an obvious lie. Using 16. Ensure that firmware is up to date.
[ 1.596306] ata1.00: ATAPI: DW-224E-C, C.8D, max UDMA/33
[ 1.612185] ata1.00: configured for UDMA/33
[ 1.614478] scsi 0:0:0:0: CD-ROM TEAC DW-224E-C C.8D
PQ: 0 ANSI: 5
[ 1.630702] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.630764] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.630988] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.636895] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.652188] cciss 0000:02:01.0: cciss0: <0x46> at PCI 0000:02:01.0 IRQ 24
using DAC
[ 1.667159] cciss/c0d0: p1 p2
[ 1.760051] Refined TSC clocksource calibration: 3400.120 MHz.
[ 1.760120] Switching to clocksource tsc
[ 2.089369] PM: Starting manual resume from disk
[ 2.089432] PM: Hibernation image partition 104:2 present
[ 2.089434] PM: Looking for hibernation image.
[ 2.089646] PM: Image not found (code -22)
[ 2.089650] PM: Hibernation image not present or could not be loaded.
[ 2.120225] EXT3-fs: barriers not enabled
[ 2.122770] kjournald starting. Commit interval 5 seconds
[ 2.122812] EXT3-fs (cciss/c0d0p1): mounted filesystem with ordered data mode
[ 3.266938] udevd[228]: starting version 172
[ 3.543435] ACPI: acpi_idle registered with cpuidle
[ 3.551625] intel_rng: FWH not detected
[ 3.555286] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.578050] i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.05
[ 3.578225] i6300ESB timer: initialized (0xf8250000). heartbeat=30 sec
(nowayout=0)
[ 3.591554] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.591640] ACPI: Power Button [PWRF]
[ 3.593687] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.597443] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.617566] hpwdt 0000:01:04.0: This server does not have an iLO2+ ASIC.
[ 3.627047] hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.650449] EDAC MC: Ver: 2.1.0 Jul 5 2011
[ 3.653399] Contact your BIOS vendor to see if the E752x error registers can
be safely un-hidden
[ 3.853390] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.904731] udevd[248]: renamed network interface eth0 to rename2
[ 5.810419] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input3
[ 94.614755] Adding 2766236k swap on /dev/cciss/c0d0p2. Priority:-1
extents:1 across:2766236k
[ 94.795615] EXT3-fs (cciss/c0d0p1): using internal journal
[ 94.882936] loop: module loaded
[ 96.079642] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 98.476737] sshd (1287): /proc/1287/oom_adj is deprecated, please use
/proc/1287/oom_score_adj instead.
[ 99.175839] tg3 0000:02:02.1: eth1: Link is up at 1000 Mbps, full duplex
[ 99.175908] tg3 0000:02:02.1: eth1: Flow control is on for TX and on for RX
[ 99.176185] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 109.984026] eth1: no IPv6 routers present
[ 6213.726846] ------------[ cut here ]------------
[ 6213.726878] WARNING: at
/build/buildd-linux-2.6_2.6.39-3-i386-0YkQQW/linux-2.6-2.6.39/debian/build/source_i386_none/kernel/printk.c:293
do_syslog+0x74/0x38f()
[ 6213.726924] Hardware name: ProLiant DL360 G4
[ 6213.726941] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG
(deprecated).
[ 6213.726971] Modules linked in: loop psmouse snd_pcm snd_timer evdev snd
soundcore snd_page_alloc e752x_edac edac_core hpilo hpwdt shpchp pcspkr button
container i6300esb serio_raw pci_hotplug rng_core processor ext3 jbd mbcache sg
sr_mod cdrom ata_generic ata_piix libata uhci_hcd floppy cciss tg3 scsi_mod
ehci_hcd thermal thermal_sys usbcore libphy [last unloaded: scsi_wait_scan]
[ 6213.727140] Pid: 4773, comm: syslog-ng Not tainted 2.6.39-2-686-pae #1
[ 6213.727159] Call Trace:
[ 6213.727176] [<c1036b45>] ? warn_slowpath_common+0x6a/0x7b
[ 6213.727197] [<c1037b69>] ? do_syslog+0x74/0x38f
[ 6213.727216] [<c1036bbc>] ? warn_slowpath_fmt+0x28/0x2c
[ 6213.727235] [<c1037b69>] ? do_syslog+0x74/0x38f
[ 6213.727256] [<c10c18e1>] ? kmem_cache_alloc_trace+0x77/0x81
[ 6213.727278] [<c1108e01>] ? kmsg_open+0x10/0x12
[ 6213.727297] [<c110176b>] ? proc_reg_open+0x82/0xeb
[ 6213.727316] [<c1108de0>] ? kclist_add+0x3f/0x3f
[ 6213.727336] [<c10cb1cd>] ? __dentry_open+0x15b/0x236
[ 6213.727356] [<c10cb32b>] ? nameidata_to_filp+0x3a/0x45
[ 6213.727377] [<c11016e9>] ? proc_fill_super+0x87/0x87
[ 6213.727397] [<c10d5155>] ? do_last+0x441/0x51c
[ 6213.727418] [<c10d56bd>] ? path_openat+0x97/0x27d
[ 6213.727438] [<c10d5947>] ? do_filp_open+0x21/0x5d
[ 6213.727457] [<c10caf38>] ? do_sys_open+0x58/0xd1
[ 6213.727476] [<c10caff5>] ? sys_open+0x1e/0x23
[ 6213.727499] [<c12b721f>] ? sysenter_do_call+0x12/0x28
[ 6213.727518] ---[ end trace 78e8a021e2e4bf57 ]---
** Model information
not available
** Loaded modules:
Module Size Used by
loop 17777 0
psmouse 45863 0
snd_pcm 52731 0
snd_timer 22171 1 snd_pcm
evdev 13084 2
snd 38189 2 snd_pcm,snd_timer
soundcore 12878 1 snd
snd_page_alloc 12841 1 snd_pcm
e752x_edac 16882 0
edac_core 30120 1 e752x_edac
hpilo 12753 0
hpwdt 12703 0
shpchp 26653 0
pcspkr 12515 0
button 12783 0
container 12525 0
i6300esb 12695 0
serio_raw 12758 0
pci_hotplug 26303 1 shpchp
rng_core 12550 0
processor 26983 0
ext3 102125 1
jbd 40818 1 ext3
mbcache 12810 1 ext3
sg 21385 0
sr_mod 17418 0
cdrom 34631 1 sr_mod
ata_generic 12439 0
ata_piix 21079 0
libata 132100 2 ata_generic,ata_piix
uhci_hcd 21850 0
floppy 47893 0
cciss 76859 3
tg3 103807 0
scsi_mod 134453 4 sg,sr_mod,libata,cciss
ehci_hcd 34885 0
thermal 13058 0
thermal_sys 17667 2 processor,thermal
usbcore 99225 3 uhci_hcd,ehci_hcd
libphy 18279 1 tg3
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth1
iface eth1 inet static
address 172.17.20.20
netmask 255.255.252.0
network 172.17.20.0
gateway 172.17.20.1
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: rename2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:14:38:ee:9c:36 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:14:38:ee:7c:55 brd ff:ff:ff:ff:ff:ff
inet 172.17.20.20/22 brd 172.17.23.255 scope global eth1
inet6 fe80::214:38ff:feee:7c55/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 211167 1636 0 0 0 0 0 0 211167
1636 0 0 0 0 0 0
rename2: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth1: 2336110 12840 0 0 0 0 0 0 1640719
11106 0 0 0 0 0 0
*** Protocol statistics:
Ip:
13674 total packets received
0 forwarded
0 incoming packets discarded
13672 incoming packets delivered
12557 requests sent out
88 outgoing packets dropped
4 reassemblies required
2 packets reassembled ok
Icmp:
5932 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1152
echo requests: 98
echo replies: 4682
5959 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 99
echo request: 5762
echo replies: 98
IcmpMsg:
InType0: 4682
InType3: 1152
InType8: 98
OutType0: 98
OutType3: 99
OutType8: 5762
Tcp:
59 active connections openings
7 passive connection openings
2 failed connection attempts
0 connection resets received
3 connections established
3201 segments received
3054 segments send out
0 segments retransmited
0 bad segments received.
6 resets sent
Udp:
4034 packets received
99 packets to unknown port received.
0 packet receive errors
3633 packets sent
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
19 delayed acks sent
14 packets directly queued to recvmsg prequeue.
850 packet headers predicted
360 acknowledgments not containing data payload received
1624 predicted acknowledgments
IpExt:
InBcastPkts: 406
InOctets: 2274307
OutOctets: 1643244
InBcastOctets: 58664
*** Device features:
eth1: 0x49a3
lo: 0x201b7c65
rename2: 0x49a3
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub
[8086:3590] (rev 0c)
Subsystem: Compaq Computer Corporation Device [0e11:3200]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [40] Vendor Specific Information: Len=05 <?>
00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port
A [8086:3595] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express Port B
[8086:3597] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C
[8086:3599] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] MSI: Enable- Count=1/2 Maskable- 64bit-
Address: fee00000 Data: 0000
Capabilities: [64] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
<4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna+
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge
[8086:25ae] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] PCI-X bridge device
Secondary Status: 64bit+ 133MHz- SCD- USC- SCO- SRD- Freq=66MHz
Status: Dev=00:1c.0 64bit+ 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=0
Downstream: Capacity=65535 CommitmentLimit=0
00:1d.0 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host
Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 5000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host
Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 5020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer
[8086:25ab] (rev 02)
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=16]
Kernel driver in use: i6300ESB timer
00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable
Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [50] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=00:1d.5 64bit+ 133MHz- SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
00:1d.7 USB Controller [0c03]: Intel Corporation 6300ESB USB2 Enhanced Host
Controller [8086:25ad] (rev 02) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00001000-00003fff
Memory behind bridge: fbf00000-fcffffff
Prefetchable memory behind bridge: 80100000-801fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller
[8086:25a1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 6300ESB PATA Storage Controller
[8086:25a2] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 0500 [size=16]
Region 5: Memory at 80200000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
01:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 80100000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights
Out Controller [0e11:b203] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:b206]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512]
Capabilities: [f0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights
Out Processor [0e11:b204] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:b206]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K]
Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at 80120000 [disabled] [size=64K]
Capabilities: [f0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: hpilo
02:01.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array
64xx [0e11:0046] (rev 01)
Subsystem: Compaq Computer Corporation Smart Array 6i [0e11:4091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=8K]
Region 2: I/O ports at 4000 [size=256]
Region 3: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at 80000000 [disabled] [size=256K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [dc] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=8
Status: Dev=02:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] Vital Product Data
Not readable
Kernel driver in use: cciss
02:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter
(PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fdf70000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=02:02.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: HP NC7782 Gigabit Server Adapter
Read-only fields:
[PN] Part number: 349321-001
[EC] Engineering changes: N/A
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 46 byte(s) reserved
Read/write fields:
[YA] Asset tag: N/A
[RW] Read-write area: 115 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: fd7ffd7fcb7deeb8 Data: adfd
Kernel driver in use: tg3
02:02.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter
(PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Region 0: Memory at fdf60000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=02:02.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: HP NC7782 Gigabit Server Adapter
Read-only fields:
[PN] Part number: 349321-001
[EC] Engineering changes: N/A
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum bad, 46 byte(s) reserved
Read/write fields:
[YA] Asset tag: N/A
[RW] Read-write area: 115 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: f7bfeeecfffff7fc Data: 9bed
Kernel driver in use: tg3
06:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=09, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=06:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
06:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge
B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=0a, subordinate=0c, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s, Latency L0
unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=06:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: wheezy/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.39-2-686-pae recommends:
ii firmware-linux-free 3 Binary firmware for various driver
ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii grub-pc 1.99-8 GRand Unified Bootloader, version
pn linux-doc-2.6.39 <none> (no description available)
Versions of packages linux-image-2.6.39-2-686-pae is related to:
ii firmware-bnx2 0.32 Binary firmware for Broadcom NetXt
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.32 Binary firmware for various driver
ii firmware-linux-nonfree 0.32 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae:
false
linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae:
true
linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:
--- End Message ---
